On 6/12/2010 1:15 AM, arun b wrote: > Thank you for the detaild response.... > as I mentioned before.. > I want to run multiple pppd sessions which results in interface (ppp0, > ppp1, ppp2......). > well the connectivity is... as below > the hardware I am using is connected to pc with ethernet crosscable. > on pc i run - pppoe-server > sudo pppoe-server -I eth0:0 -R 10.0.0.2 > > on my hardware, which is a client, pppd is executed. > pppd eth0 user xxxx passwordd dddd > > though i am able to create mutlipel interfaces . i am not be able to > commuicte over all insted.. > > > I guess these is due to same server -IP :( If you can't give us detailed information, there's likely to be little that anyone can do to help you. Any details you care to share would be appreciated -- "netstat -nr" output, packet traces (as I requested last time), debug output, et cetera. My understanding is that pppoe-server will not hand out the same IP address to each connection, so that shouldn't be the problem you're having. But, yes, if you did have conflicting addresses on the links, then you'd have a problem. However, it's impossible to determine what sort of problem you might be having if you won't provide details. We just can't see your computer from here. -- James Carlson 42.703N 71.076W <carlsonj@xxxxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-ppp" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
