I have the same pptp configuration stuff on two Linux boxes.
Box A is 2.6.9-78.0.5.ELsmp #1 and Box B is 2.6.9-55.ELsmp #1 SMP.
Up until just a few days ago pptp from both boxes worked fine.
Options: MPPE and refuse EAP. The other 2 encryption boxes are not checked.
In miscellaneous I have debug turned on.
Box B shows this from debug:
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x354ce8ff> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <auth chap MS-v2> <mru 1460> <magic 0x99302d60>]
(then some more sent and receiveds)
Box A just show repeat:
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe58c245e> <pcomp> <accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xe58c245e> <pcomp> <accomp>]
Script pptp X.X.X.X --nolaunchpppd finished (pid 18300), status = 0x0
Modem hangup
Connection terminated.
(I Xed out the actual VPN IP address which is the same as Box B).
So for some reason, Box A is not getting a response back. I see it is
a different magic number. Could that have anything to do with it? After
a short time it gets a SIGUSR:
pptpconfig: pppd process terminated by signal 16 (failed)
pptpconfig: SIGUSR1
Any idea what is happening? I did recently install cisco vpn client
on Box A, but pptp was working after to that.
--
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
