Re: How to fix continuous ConfReq's on celluar internet connection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 10 Aug 2008, Marshall Crocker wrote:

Hi all,

For over a year now I've been having problems with ConfReq's resetting my ppp connection to my cellular EvDO internet provider. I can connect with no problems but usually the connection will only stay up for a few minutes (sometimes a few seconds) before I receive a ConfReq. I think the ConfReq is sent because I'm in a fringe area of service and my connection is switching between EvDO (3G broadband speeds) and 1xRTT (144 Kbps 2.5G). It may also be that I'm between two towers and the connection is bouncing between the two thereby requiring my host to reconfigure.

The biggest problem with this behavior is that the ppp0 interface is brought down after the ConfReq is received. Any TCP connections that were in progress get closed. In Windows, the connection is reconfigured but either the interface isn't completely brought down or a "no route to host" isn't sent for each open connection and the packets just get dropped during the reconfigure and then retransmitted once the connection comes back up so actions such as browsing web pages only get stalled briefly.

So my questions are

1) Has anyone else seen this behavior or is it specific to my internet provider?

2) Is there some pppd option that I'm missing that could solve this problem?

3) Should I block these ConfReq's once the connection is established using iptables or some other method? I assume not since the tower may drop my connection if my host doesn't respond.

4) Maybe I could hack pppd to not bring the connection down during reconfiguration/reauthenication if the connection details are the same (i.e. same local and ptp ip addresses, same dns, etc. )?

I know there is a firmware update to my EvDO card (a Kyocera KPC650) which will allow you to "lock" in a tower and technology (EvDO or 1xRTT) but I don't think it will work in linux unless the KPC650 command and control protocol has been decoded. It may be possible to do the "lock" from the windows client and then the card stays locked but I don't know.

Any help is greatly appreciated as I have been stuck using XP and ICS instead of putting my EvDO card in my soekris router.

Below is a snip from the pppd debug log. I can also provide the windows ppp log if that would help.

Don't remove the timing information from the log ( or perpahs you are not
giving the syslog output
Put
local2.*;daemon.*     /var/log/ppplog
into /etc/syslog.conf
and then do killall -1 syslogd

(do not forget the -1)
)

You could also try disabling echo req. Perhaps that it triggering the far
end to dump the connection.





Thanks,
Marshall

local  IP address X.X.X.X
remote IP address X.X.X.X
primary   DNS address X.X.X.X
secondary DNS address X.X.X.X
Script /etc/ppp/ip-up started (pid 15676)
Script /etc/ppp/ip-up finished (pid 15676), status = 0x1
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <auth pap> <magic 0xdd5ce74b>]
Connect time 0.3 minutes.
Sent 1115 bytes, received 778 bytes.
Script /etc/ppp/ip-down started (pid 15685)
sent [LCP ConfReq id=0x8e <asyncmap 0x0> <magic 0x6a4b56c2> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0x0> <auth pap> <magic 0xdd5ce74b>]
rcvd [LCP ConfAck id=0x8e <asyncmap 0x0> <magic 0x6a4b56c2> <pcomp> <accomp>]
sent [LCP EchoReq id=0x0 magic=0x6a4b56c2]
sent [PAP AuthReq id=0xb2 user="XXXXX@xxxxxxxx" password=<hidden>]
Script /etc/ppp/ip-down finished (pid 15685), status = 0x0
rcvd [LCP EchoRep id=0x0 magic=0xdd5ce74b]
rcvd [PAP AuthAck id=0xb2 ""]
PAP authentication succeeded
sent [IPCP ConfReq id=0x57 <compress VJ 0f 01> <addr X.X.X.X> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x1 <addr X.X.X.X>]
sent [IPCP ConfAck id=0x1 <addr X.X.X.X>]
rcvd [IPCP ConfRej id=0x57 <compress VJ 0f 01>]
sent [IPCP ConfReq id=0x58 <addr X.X.X.X> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfNak id=0x58 <ms-dns1 X.X.X.X> <ms-dns3 X.X.X.X>]
sent [IPCP ConfReq id=0x59 <addr X.X.X.X> <ms-dns1 X.X.X.X> <ms-dns3 X.X.X.X>] rcvd [IPCP ConfAck id=0x59 <addr X.X.X.X> <ms-dns1 X.X.X.X> <ms-dns3 X.X.X.X>]
Cannot determine ethernet address for proxy ARP
local  IP address X.X.X.X
remote IP address X.X.X.X
primary   DNS address X.X.X.X
secondary DNS address X.X.X.X
Script /etc/ppp/ip-up started (pid 15691)
Script /etc/ppp/ip-up finished (pid 15691), status = 0x1
--
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


--
William G. Unruh   |  Canadian Institute for|     Tel: +1(604)822-3273
Physics&Astronomy  |     Advanced Research  |     Fax: +1(604)822-5324
UBC, Vancouver,BC  |   Program in Cosmology |     unruh@xxxxxxxxxxxxxx
Canada V6T 1Z1     |      and Gravity       |  www.theory.physics.ubc.ca/
--
To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Audio Users]     [Linux for Hams]     [Kernel Newbies]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Samba]     [Video 4 Linux]     [Fedora Users]

  Powered by Linux