Re: [PATCH V5 3/5] POWER/cpuidle: Generic IBM-POWER backend cpuidle driver.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> diff --git a/drivers/cpuidle/Kconfig b/drivers/cpuidle/Kconfig
> index 0e2cd5c..e805dcd 100644
> --- a/drivers/cpuidle/Kconfig
> +++ b/drivers/cpuidle/Kconfig

Maybe drivers/cpuidle/Kconfig.powerpc is better? Like arm.

> +obj-$(CONFIG_CPU_IDLE_IBM_POWER) += cpuidle-ibm-power.o
> diff --git a/drivers/cpuidle/cpuidle-ibm-power.c
> b/drivers/cpuidle/cpuidle-ibm-power.c
> new file mode 100644
> index 0000000..4ee5a94
> --- /dev/null
> +++ b/drivers/cpuidle/cpuidle-ibm-power.c
> @@ -0,0 +1,304 @@
> +/*
> + *  cpuidle-ibm-power - idle state cpuidle driver.
> + *  Adapted from drivers/idle/intel_idle.c and
> + *  drivers/acpi/processor_idle.c
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/moduleparam.h>
> +#include <linux/cpuidle.h>
> +#include <linux/cpu.h>
> +#include <linux/notifier.h>
> +
> +#include <asm/paca.h>
> +#include <asm/reg.h>
> +#include <asm/machdep.h>
> +#include <asm/firmware.h>
> +#include <asm/runlatch.h>
> +#include <asm/plpar_wrappers.h>
> +
> +struct cpuidle_driver power_idle_driver = {
> +	.name             = "IBM-POWER-Idle",
> +	.owner            = THIS_MODULE,
> +};
> +
> +#define MAX_IDLE_STATE_COUNT	2
> +
> +static int max_idle_state = MAX_IDLE_STATE_COUNT - 1;

Again, do not use the macro.

> +static struct cpuidle_state *cpuidle_state_table;
> +
> +static inline void idle_loop_prolog(unsigned long *in_purr)
> +{
> +	*in_purr = mfspr(SPRN_PURR);
> +	/*
> +	 * Indicate to the HV that we are idle. Now would be
> +	 * a good time to find other work to dispatch.
> +	 */
> +	get_lppaca()->idle = 1;
> +}
> +
> +static inline void idle_loop_epilog(unsigned long in_purr)
> +{
> +	get_lppaca()->wait_state_cycles += mfspr(SPRN_PURR) - in_purr;
> +	get_lppaca()->idle = 0;
> +}
> +
> +static int snooze_loop(struct cpuidle_device *dev,
> +			struct cpuidle_driver *drv,
> +			int index)
> +{
> +	unsigned long in_purr;
> +
> +	idle_loop_prolog(&in_purr);
> +	local_irq_enable();

snooze_loop has already registered in cpuidle framework to handle snooze state.
where disable the irq? Why do "enable" here?

> +/*
> + * States for dedicated partition case.
> + */
> +static struct cpuidle_state dedicated_states[MAX_IDLE_STATE_COUNT] = {
> +	{ /* Snooze */
> +		.name = "snooze",
> +		.desc = "snooze",
> +		.flags = CPUIDLE_FLAG_TIME_VALID,
> +		.exit_latency = 0,
> +		.target_residency = 0,
> +		.enter = &snooze_loop },
> +	{ /* CEDE */
> +		.name = "CEDE",
> +		.desc = "CEDE",
> +		.flags = CPUIDLE_FLAG_TIME_VALID,
> +		.exit_latency = 10,
> +		.target_residency = 100,
> +		.enter = &dedicated_cede_loop },
> +};
> +
> +/*
> + * States for shared partition case.
> + */
> +static struct cpuidle_state shared_states[MAX_IDLE_STATE_COUNT] = {
> +	{ /* Shared Cede */
> +		.name = "Shared Cede",
> +		.desc = "Shared Cede",
> +		.flags = CPUIDLE_FLAG_TIME_VALID,
> +		.exit_latency = 0,
> +		.target_residency = 0,
> +		.enter = &shared_cede_loop },
> +};
> +
> +static void __exit power_processor_idle_exit(void)
> +{
> +
> +	unregister_cpu_notifier(&setup_hotplug_notifier);

Remove a blank line.

> +	cpuidle_unregister(&power_idle_driver);
> +	return;
> +}
> +
> +module_init(power_processor_idle_init);
> +module_exit(power_processor_idle_exit);
> +

Did you have tested the module? If not tested, please don't use the module.

> +MODULE_AUTHOR("Deepthi Dharwar <deepthi@xxxxxxxxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Cpuidle driver for IBM POWER platforms");
> +MODULE_LICENSE("GPL");
> 






[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux