Hi Sedat,
* Sedat Dilek <sedat.dilek@xxxxxxxxx> [2013-04-26 19:40:20 +0200]:
> On Fri, Apr 26, 2013 at 7:32 PM, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> > On Fri, Apr 26, 2013 at 7:30 PM, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> >> On Fri, Apr 26, 2013 at 10:03 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
> >>> Hi all,
> >>>
> >>> Changes since 20130424:
> >>>
> >>> Removed tree: ppc-temp (remerged into powerpc)
> >>>
> >>> The net-next tree gained conflicts against the net and pci trees and a
> >>> build failure for which I applied a merge fix patch.
> >>>
> >>> The omap_dss2 tree gained a build failure so I used the version from
> >>> next-20130424.
> >>>
> >>> The trivial tree gained a conflict against the arm tree.
> >>>
> >>> The staging tree still had its build failure for which I applied a
> >>> supplied patch.
> >>>
> >>> The arm-soc tree gained a conflict against the spi-mb tree.
> >>>
> >>> The renesas tree gained a conflict against the input tree.
> >>>
> >>
> >> [ CC linux-bluetooth + linux-pm folks ]
> >>
> >> I see the following:
> >>
> >> [ 176.667799] PM: Syncing filesystems ... done.
> >> [ 176.670014] PM: Preparing system for mem sleep
> >> [ 176.670422] Freezing user space processes ...
> >> [ 196.656719] Freezing of tasks failed after 20.00 seconds (1 tasks
> >> refusing to freeze, wq_busy=0):
> >> [ 196.656728] bluetoothd D ffffffff8180d8c0 0 1012 863 0x00000004
> >> [ 196.656731] ffff88008fdb3cc8 0000000000000046 ffff8800926530d0
> >> 0000020000000000
> >> [ 196.656735] ffff88008feca200 ffff88008fdb3fd8 ffff88008fdb3fd8
> >> ffff88008fdb3fd8
> >> [ 196.656738] ffff880119f78300 ffff88008feca200 ffff88008fdb3cf8
> >> ffff880095281950
> >> [ 196.656741] Call Trace:
> >> [ 196.656749] [<ffffffff816cfc99>] schedule+0x29/0x70
> >> [ 196.656752] [<ffffffff816cff9e>] schedule_preempt_disabled+0xe/0x10
> >> [ 196.656754] [<ffffffff816ce075>] __mutex_lock_slowpath+0x125/0x2f0
> >> [ 196.656757] [<ffffffff816ce25e>] mutex_lock+0x1e/0x40
> >> [ 196.656773] [<ffffffffa016f8b1>] hci_dev_open+0x51/0x2e0 [bluetooth]
> >> [ 196.656780] [<ffffffffa0182752>] hci_sock_ioctl+0x1f2/0x3f0 [bluetooth]
> >> [ 196.656783] [<ffffffff815c6050>] sock_do_ioctl+0x30/0x70
> >> [ 196.656786] [<ffffffff815c75f9>] sock_ioctl+0x79/0x2f0
> >> [ 196.656790] [<ffffffff811a8046>] do_vfs_ioctl+0x96/0x560
> >> [ 196.656794] [<ffffffff811a85a1>] SyS_ioctl+0x91/0xb0
> >> [ 196.656797] [<ffffffff816d989d>] system_call_fastpath+0x1a/0x1f
> >> [ 196.656811]
> >> [ 196.656812] Restarting tasks ... done.
> >
> > Forgot to attach dmesg + config, sorry.
> >
>
> Oops, NULL-pointer-deref [ __queue_work() ]
>
> [ 25.968262] Bluetooth: BNEP socket layer initialized
> [ 25.974875] usb 2-1.5: link qh1-0e01/ffff880091bc90c0 start 0 [1/2 us]
> [ 25.974932] BUG: unable to handle kernel NULL pointer dereference
> at 0000000000000100
> [ 25.974944] IP: [<ffffffff81077502>] __queue_work+0x32/0x3d0
> [ 25.974955] PGD 0
> [ 25.974960] Oops: 0000 [#1] SMP
> [ 25.974966] Modules linked in: bnep btusb(+) videobuf2_memops
> snd_timer drm_kms_helper videobuf2_core snd_seq_device drm parport_pc
> bluetooth microcode videodev ppdev psmouse snd cfg80211 soundcore
> samsung_laptop wmi lp serio_raw video parport mac_hid lpc_ich
> hid_generic usbhid hid r8169
> [ 25.975014] CPU: 3 PID: 1007 Comm: bluetoothd Not tainted
> 3.9.0-rc8-next20130426-3-iniza-small #1
> [ 25.975022] Hardware name: SAMSUNG ELECTRONICS CO., LTD.
> 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013
> [ 25.975030] task: ffff88008feda300 ti: ffff88008fed4000 task.ti:
> ffff88008fed4000
> [ 25.975037] RIP: 0010:[<ffffffff81077502>] [<ffffffff81077502>]
> __queue_work+0x32/0x3d0
> [ 25.975047] RSP: 0018:ffff88008fed5c48 EFLAGS: 00010046
> [ 25.975052] RAX: 0000000000000096 RBX: 0000000000000292 RCX: 0000000000000000
> [ 25.975058] RDX: ffff880095281850 RSI: 0000000000000000 RDI: 0000000000000100
> [ 25.975063] RBP: ffff88008fed5c88 R08: 0000000000000000 R09: 0000000000000300
> [ 25.975069] R10: ffff880094981a00 R11: 0000000000000000 R12: ffff880095281850
> [ 25.975074] R13: 0000000000000000 R14: 0000000000000100 R15: 00000000000009c4
> [ 25.975081] FS: 00007f2f61707740(0000) GS:ffff88011fac0000(0000)
> knlGS:0000000000000000
> [ 25.975088] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [ 25.975093] CR2: 0000000000000100 CR3: 000000009101f000 CR4: 00000000000407e0
> [ 25.975099] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
> [ 25.975104] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
> [ 25.975109] Stack:
> [ 25.975113] ffff88008fed5c88 ffffffff00000100 ffff880095281000
> 0000000000000292
> [ 25.975124] ffff880095281000 ffff880095281908 ffff88008fed5cf0
> 00000000000009c4
> [ 25.975133] ffff88008fed5ca8 ffffffff81077be5 ffff880095281000
> ffff88008fed5ce8
> [ 25.975143] Call Trace:
> [ 25.975151] [<ffffffff81077be5>] queue_work_on+0x45/0x50
> [ 25.975165] [<ffffffffa016e8ff>] hci_req_run+0xbf/0xf0 [bluetooth]
> [ 25.975177] [<ffffffffa01709b0>] ? hci_init2_req+0x720/0x720 [bluetooth]
> [ 25.975188] [<ffffffffa016ea06>] __hci_req_sync+0xd6/0x1c0 [bluetooth]
> [ 25.975197] [<ffffffff8108ee10>] ? try_to_wake_up+0x2b0/0x2b0
> [ 25.975205] [<ffffffff8150e3f0>] ? usb_autopm_put_interface+0x30/0x40
> [ 25.975217] [<ffffffffa016fad5>] hci_dev_open+0x275/0x2e0 [bluetooth]
> [ 25.975230] [<ffffffffa0182752>] hci_sock_ioctl+0x1f2/0x3f0 [bluetooth]
> [ 25.975238] [<ffffffff815c6050>] sock_do_ioctl+0x30/0x70
> [ 25.975245] [<ffffffff815c75f9>] sock_ioctl+0x79/0x2f0
> [ 25.975254] [<ffffffff811a8046>] do_vfs_ioctl+0x96/0x560
> [ 25.975262] [<ffffffff811a85a1>] SyS_ioctl+0x91/0xb0
> [ 25.975271] [<ffffffff816d989d>] system_call_fastpath+0x1a/0x1f
Sorry for the big delay on this one, I lost track of this e-mail.
So, the only way I see this happening is a race between hci_register_dev and
hci_dev_open. If someone issue a syscall to power the bluetooth device on
while hci_register_dev is still running and have not yet created the
workqueues. The following patch should help with this, it defers the addition
of the device into the list, so hci_dev_open will only see the device if
workqueue and other things were already created.
Gustavo
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index dc34bfa..ce34960 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -2165,10 +2165,6 @@ int hci_register_dev(struct hci_dev *hdev)
BT_DBG("%p name %s bus %d", hdev, hdev->name, hdev->bus);
- write_lock(&hci_dev_list_lock);
- list_add(&hdev->list, &hci_dev_list);
- write_unlock(&hci_dev_list_lock);
-
hdev->workqueue = alloc_workqueue(hdev->name, WQ_HIGHPRI | WQ_UNBOUND |
WQ_MEM_RECLAIM, 1);
if (!hdev->workqueue) {
@@ -2207,6 +2203,10 @@ int hci_register_dev(struct hci_dev *hdev)
hci_notify(hdev, HCI_DEV_REG);
hci_dev_hold(hdev);
+ write_lock(&hci_dev_list_lock);
+ list_add(&hdev->list, &hci_dev_list);
+ write_unlock(&hci_dev_list_lock);
+
queue_work(hdev->req_workqueue, &hdev->power_on);
return id;
@@ -2216,9 +2216,6 @@ err_wqueue:
destroy_workqueue(hdev->req_workqueue);
err:
ida_simple_remove(&hci_index_ida, hdev->id);
- write_lock(&hci_dev_list_lock);
- list_del(&hdev->list);
- write_unlock(&hci_dev_list_lock);
return error;
}
