On Wed, Apr 24, 2013 at 10:40 PM, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote: > On Wed, Apr 24, 2013 at 10:32 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> wrote: >> On Wed, 24 Apr 2013, Sedat Dilek wrote: >> >>> > [ CC linux-pm and linux-usb (ehci) folks ] >>> > >>> > This happens with my external USB mouse after suspend/resume. >>> > >>> > Excerpt (full dmesg and kernel-config attached): >>> > >>> > $ dmesg | egrep -i 'usb|async' | grep 1-1.2 >>> > [ 1.258602] usb 1-1.2: new low-speed USB device number 3 using ehci-pci >>> > [ 1.368649] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e >>> > [ 1.368661] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>> > SerialNumber=0 >>> > [ 1.368668] usb 1-1.2: Product: USB-PS/2 Optical Mouse >>> > [ 1.368672] usb 1-1.2: Manufacturer: Logitech >>> > [ 1.957999] input: Logitech USB-PS/2 Optical Mouse as >>> > /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 >>> > [ 62.353997] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci >>> > [ 62.636893] PM: Device 1-1.2 failed to resume async: error -32 >>> > [ 64.243543] usb 1-1.2: USB disconnect, device number 3 >>> > [ 64.380328] usb 1-1.2: new low-speed USB device number 5 using ehci-pci >>> > [ 64.477612] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e >>> > [ 64.477618] usb 1-1.2: New USB device strings: Mfr=1, Product=2, >>> > SerialNumber=0 >>> > [ 64.477621] usb 1-1.2: Product: USB-PS/2 Optical Mouse >>> > [ 64.477623] usb 1-1.2: Manufacturer: Logitech >>> > [ 64.481934] input: Logitech USB-PS/2 Optical Mouse as >>> > /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11 >>> > >> >> Did this work differently under earlier kernels? >> > > Unfortunately, s/r did not work for several Linux-Next releases as > there is missing tglx's patch pendinging in tip.git/timers/core. > > The last days I also use the touchpad, so the issue is new to me, > which says not that much :-). > > [1] http://git.kernel.org/cgit/linux/kernel/git/tip/tip.git/commit/?h=timers/core&id=77c675ba18836802f6b73d2d773481d06ebc0f04 > >>> Thos 3 lines IIRC are important (one line missing above): >>> >>> [ 62.353997] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci >>> [ 62.636877] dpm_run_callback(): usb_dev_resume+0x0/0x20 returns -32 >>> [ 62.636893] PM: Device 1-1.2 failed to resume async: error -32 >>> >>> - Sedat - >>> >>> > Any help/hints/infos welcome :-)! >> >> This indicates that the optical mouse didn't survive the suspend/resume >> sequence and had to be reenumerated. Without more information, there's >> no way to tell specifically what went wrong during the initial reset at >> timestamp 62.353997. >> >> If you want to pursue this farther, you could enable CONFIG_USB_DEBUG. >> You could also collect a usbmon trace for bus 1 showing what happens >> during the suspend and resume. >> > > Hmm, I can try to enable CONFIG_USB_DEBUG and build a new kernel. > With CONFIG_USB_DEBUG=y I do not see a PM/async line. Might you have a look at the logs? Thanks! - Sedat - > Can you give me more hints how to do a usbmon-trace? > >> On the other hand, what difference does it really make if a mouse has >> to be reenumerated? >> > > As a non-USB-expert it's hard to interprete such "bogus" lines in your logs. > I am curious enough to ask which is fair :-). > AFAICS in your eyes this is "harmless"? > > Thanks for the fast as lightning reply! > > - Sedat - > >> Alan Stern >>
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.9.0-rc8-next20130424-3-iniza-small (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Wed Apr 24 23:00:52 CEST 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc8-next20130424-3-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 13XK 03/28/2013 [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] [ 0.000000] [mem 0x00000000-0x000fffff] page 4k [ 0.000000] BRK [0x0202f000, 0x0202ffff] PGTABLE [ 0.000000] BRK [0x02030000, 0x02030fff] PGTABLE [ 0.000000] BRK [0x02031000, 0x02031fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11fc00000-0x11fdfffff] [ 0.000000] [mem 0x11fc00000-0x11fdfffff] page 2M [ 0.000000] BRK [0x02032000, 0x02032fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0x11c000000-0x11fbfffff] [ 0.000000] [mem 0x11c000000-0x11fbfffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11bffffff] [ 0.000000] [mem 0x100000000-0x11bffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff] [ 0.000000] [mem 0x00100000-0x001fffff] page 4k [ 0.000000] [mem 0x00200000-0x1fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff] [ 0.000000] [mem 0x20200000-0x3fffffff] page 2M [ 0.000000] init_memory_mapping: [mem 0x40200000-0xd9c9efff] [ 0.000000] [mem 0x40200000-0xd9bfffff] page 2M [ 0.000000] [mem 0xd9c00000-0xd9c9efff] page 4k [ 0.000000] BRK [0x02033000, 0x02033fff] PGTABLE [ 0.000000] init_memory_mapping: [mem 0xdafff000-0xdaffffff] [ 0.000000] [mem 0xdafff000-0xdaffffff] page 4k [ 0.000000] RAMDISK: [mem 0x379ae000-0x37ccefff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdf7000-0x11fdfbfff] [ 0.000000] [ffffea0000000000-ffffea0003ffffff] PMD -> [ffff88011b400000-ffff88011edfffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021500 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 156 pages reserved [ 0.000000] DMA zone: 3996 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 12127 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 1785 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000 [ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000 [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88011fa00000 s86656 r8192 d23936 u262144 [ 0.000000] pcpu-alloc: s86656 r8192 d23936 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007376 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.9.0-rc8-next20130424-3-iniza-small root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3938728k/4716544k available (7032k kernel code, 630544k absent, 147272k reserved, 6273k data, 1316k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] ODEBUG: 0 of 0 active objects replaced [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.506 MHz processor [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3193.01 BogoMIPS (lpj=6386024) [ 0.000009] pid_max: default: 32768 minimum: 301 [ 0.000142] Security Framework initialized [ 0.000154] AppArmor: AppArmor initialized [ 0.000157] Yama: becoming mindful. [ 0.000543] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001605] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.002073] Mount-cache hash table entries: 256 [ 0.002587] Initializing cgroup subsys memory [ 0.002653] Initializing cgroup subsys devices [ 0.002657] Initializing cgroup subsys freezer [ 0.002661] Initializing cgroup subsys blkio [ 0.002665] Initializing cgroup subsys perf_event [ 0.002669] Initializing cgroup subsys hugetlb [ 0.002754] Disabled fast string operations [ 0.002758] CPU: Physical Processor ID: 0 [ 0.002760] CPU: Processor Core ID: 0 [ 0.002767] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002767] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002774] mce: CPU supports 7 MCE banks [ 0.002791] CPU0: Thermal monitoring enabled (TM1) [ 0.002802] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002802] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002802] tlb_flushall_shift: 5 [ 0.002895] Freeing SMP alternatives: 24k freed [ 0.003881] ACPI: Core revision 20130328 [ 0.014709] ACPI: All ACPI Tables successfully acquired [ 0.016261] ftrace: allocating 26493 entries in 104 pages [ 0.031387] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.071052] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.071064] TSC deadline timer enabled [ 0.071077] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.071090] ... version: 3 [ 0.071092] ... bit width: 48 [ 0.071094] ... generic registers: 4 [ 0.071097] ... value mask: 0000ffffffffffff [ 0.071100] ... max period: 000000007fffffff [ 0.071102] ... fixed-purpose events: 3 [ 0.071104] ... event mask: 000000070000000f [ 0.084153] Disabled fast string operations [ 0.087332] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.098777] Disabled fast string operations [ 0.112335] Disabled fast string operations [ 0.073119] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.114466] Brought up 4 CPUs [ 0.114475] smpboot: Total of 4 processors activated (12772.04 BogoMIPS) [ 0.118479] devtmpfs: initialized [ 0.120458] EVM: security.selinux [ 0.120461] EVM: security.SMACK64 [ 0.120463] EVM: security.capability [ 0.120549] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.122030] regulator-dummy: no parameters [ 0.122179] NET: Registered protocol family 16 [ 0.122529] ACPI: bus type PCI registered [ 0.122646] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.122652] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.129418] PCI: Using configuration type 1 for base access [ 0.132739] bio: create slab <bio-0> at 0 [ 0.133138] ACPI: Added _OSI(Module Device) [ 0.133143] ACPI: Added _OSI(Processor Device) [ 0.133147] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.133150] ACPI: Added _OSI(Processor Aggregator Device) [ 0.134978] ACPI: EC: Look up EC in DSDT [ 0.162542] ACPI: Executed 1 blocks of module-level executable AML code [ 0.168525] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.179979] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.180498] ACPI: Dynamic OEM Table Load: [ 0.180502] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.190963] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.191562] ACPI: Dynamic OEM Table Load: [ 0.191566] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.202653] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.203146] ACPI: Dynamic OEM Table Load: [ 0.203150] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.216889] ACPI: Interpreter enabled [ 0.216907] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130328/hwxface-568) [ 0.216931] ACPI: (supports S0 S1 S3 S4 S5) [ 0.216935] ACPI: Using IOAPIC for interrupt routing [ 0.216991] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.240707] ACPI: Power Resource [FN00] (off) [ 0.240893] ACPI: Power Resource [FN01] (off) [ 0.241077] ACPI: Power Resource [FN02] (off) [ 0.241260] ACPI: Power Resource [FN03] (off) [ 0.241442] ACPI: Power Resource [FN04] (off) [ 0.242551] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.242895] \_SB_.PCI0:_OSC invalid UUID [ 0.242896] _OSC request data:1 8 0 [ 0.243879] PCI host bridge to bus 0000:00 [ 0.243885] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.243890] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.243893] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.243897] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.243901] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.243905] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.243923] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.244084] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.244097] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.244105] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.244110] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.244305] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.244331] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit] [ 0.244416] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.244582] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.244606] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff] [ 0.244706] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.244812] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.244831] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.244910] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.244956] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.245027] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.245119] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.245168] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.245241] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.245329] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.245388] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.245460] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.245590] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.245724] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.245748] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff] [ 0.245849] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.245952] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.246152] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.246175] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f] [ 0.246184] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097] [ 0.246194] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087] [ 0.246204] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093] [ 0.246214] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f] [ 0.246224] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff] [ 0.246276] pci 0000:00:1f.2: PME# supported from D3hot [ 0.246402] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.246421] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.246445] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.246827] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.247023] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.247756] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.247926] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.254648] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.254658] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.254834] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.254904] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] [ 0.255026] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.255102] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.255440] pci 0000:02:00.0: supports D1 D2 [ 0.255442] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.255568] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.262567] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.262582] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.262604] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.262804] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.262841] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.263040] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.270561] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.270581] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.270777] \_SB_.PCI0:_OSC invalid UUID [ 0.270779] _OSC request data:1 1f 0 [ 0.270783] acpi PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.270788] acpi PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.271659] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.271778] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.271896] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.272011] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.272127] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.272243] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.272359] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.272473] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.273113] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.273123] acpi root: \_SB_.PCI0 notify handler is installed [ 0.273187] Found 1 acpi root devices [ 0.273255] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.273467] ACPI: No dock devices found. [ 0.273670] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.273676] vgaarb: loaded [ 0.273678] vgaarb: bridge control possible 0000:00:02.0 [ 0.274356] SCSI subsystem initialized [ 0.274360] ACPI: bus type ATA registered [ 0.274474] libata version 3.00 loaded. [ 0.274539] ACPI: bus type USB registered [ 0.274590] usbcore: registered new interface driver usbfs [ 0.274615] usbcore: registered new interface driver hub [ 0.274669] usbcore: registered new device driver usb [ 0.274988] PCI: Using ACPI for IRQ routing [ 0.276656] PCI: pci_cache_line_size set to 64 bytes [ 0.276767] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.276770] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.276772] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.276773] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.277053] NetLabel: Initializing [ 0.277056] NetLabel: domain hash size = 128 [ 0.277058] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.277107] NetLabel: unlabeled traffic allowed by default [ 0.277192] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.277202] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.279217] Switching to clocksource hpet [ 0.296518] AppArmor: AppArmor Filesystem Enabled [ 0.296579] pnp: PnP ACPI init [ 0.296597] ACPI: bus type PNP registered [ 0.296928] pnp 00:00: [dma 4] [ 0.297009] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.297051] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.297222] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.297275] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.297353] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.297358] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.297362] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.297366] system 00:04: [io 0xffff] has been reserved [ 0.297370] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.297375] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.297379] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.297383] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.297387] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.297391] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.297397] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.297442] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.297536] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.297542] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.297603] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.297689] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.298003] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.298008] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.298012] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.298016] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.298021] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.298025] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.298029] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.298033] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.298038] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.298042] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.298047] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.298720] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.298759] pnp: PnP ACPI: found 11 devices [ 0.298762] ACPI: bus type PNP unregistered [ 0.306351] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.306361] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.306373] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.306378] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.306389] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.306399] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.306407] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.306844] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.306847] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.306849] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.306851] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.306853] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.306855] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.306857] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.306859] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.306861] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.306981] NET: Registered protocol family 2 [ 0.307337] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.307519] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes) [ 0.307805] TCP: Hash tables configured (established 32768 bind 32768) [ 0.308067] TCP: reno registered [ 0.308088] UDP hash table entries: 2048 (order: 5, 196608 bytes) [ 0.308154] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes) [ 0.308394] NET: Registered protocol family 1 [ 0.308416] pci 0000:00:02.0: Boot video device [ 0.309192] PCI: CLS 64 bytes, default 64 [ 0.309405] Trying to unpack rootfs image as initramfs... [ 0.380912] Freeing initrd memory: 3204k freed [ 0.381596] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.381605] software IO TLB [mem 0xd5c9f000-0xd9c9f000] (64MB) mapped at [ffff8800d5c9f000-ffff8800d9c9efff] [ 0.381939] Scanning for low memory corruption every 60 seconds [ 0.382309] Initialise module verification [ 0.382370] audit: initializing netlink socket (disabled) [ 0.382390] type=2000 audit(1366844847.376:1): initialized [ 0.411888] bounce pool size: 64 pages [ 0.411916] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.412529] VFS: Disk quotas dquot_6.5.2 [ 0.412572] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.413286] fuse init (API version 7.21) [ 0.413383] msgmni has been set to 7699 [ 0.413935] Key type asymmetric registered [ 0.413939] Asymmetric key parser 'x509' registered [ 0.413987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.414042] io scheduler noop registered [ 0.414045] io scheduler deadline registered (default) [ 0.414078] io scheduler cfq registered [ 0.414471] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.414516] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.414608] intel_idle: MWAIT substates: 0x21120 [ 0.414610] intel_idle: v0.4 model 0x2A [ 0.414611] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.415073] ACPI: AC Adapter [ADP1] (on-line) [ 0.415484] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 [ 0.415509] ACPI: Lid Switch [LID0] [ 0.415575] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.415583] ACPI: Power Button [PWRB] [ 0.415647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.415653] ACPI: Power Button [PWRF] [ 0.415752] ACPI: Fan [FAN0] (off) [ 0.415805] ACPI: Fan [FAN1] (off) [ 0.415858] ACPI: Fan [FAN2] (off) [ 0.415912] ACPI: Fan [FAN3] (off) [ 0.415965] ACPI: Fan [FAN4] (off) [ 0.416060] ACPI: Requesting acpi_cpufreq [ 0.423330] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.423336] ACPI: Thermal Zone [TZ00] (64 C) [ 0.423761] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.423765] ACPI: Thermal Zone [TZ01] (30 C) [ 0.423829] GHES: HEST is not enabled! [ 0.424038] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.428672] ACPI: Battery Slot [BAT1] (battery present) [ 0.428695] Linux agpgart interface v0.103 [ 0.431093] brd: module loaded [ 0.432329] loop: module loaded [ 0.432559] mei_me 0000:00:16.0: setting latency timer to 64 [ 0.432624] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 0.435702] ahci 0000:00:1f.2: version 3.0 [ 0.435889] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.436096] ahci: SSS flag set, parallel bus scan disabled [ 0.451143] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.451149] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.451158] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.479926] scsi0 : ahci [ 0.480083] scsi1 : ahci [ 0.480196] scsi2 : ahci [ 0.480306] scsi3 : ahci [ 0.480420] scsi4 : ahci [ 0.480569] scsi5 : ahci [ 0.480643] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 41 [ 0.480649] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 41 [ 0.480653] ata3: DUMMY [ 0.480657] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 41 [ 0.480662] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 41 [ 0.480665] ata6: DUMMY [ 0.481570] libphy: Fixed MDIO Bus: probed [ 0.481834] tun: Universal TUN/TAP device driver, 1.6 [ 0.481837] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.481913] PPP generic driver version 2.4.2 [ 0.482029] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.482033] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96 [ 0.482040] ehci-pci: EHCI PCI platform driver [ 0.482224] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.482233] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.482243] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.482267] ehci-pci 0000:00:1a.0: debug port 2 [ 0.482274] ehci-pci 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.482277] ehci-pci 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.482316] ehci-pci 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.486209] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.486211] ehci-pci 0000:00:1a.0: supports USB remote wakeup [ 0.486256] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.486263] ehci-pci 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.495089] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.495141] usb usb1: default language 0x0409 [ 0.495154] usb usb1: udev 1, busnum 1, minor = 0 [ 0.495156] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.495160] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.495164] usb usb1: Product: EHCI Host Controller [ 0.495168] usb usb1: Manufacturer: Linux 3.9.0-rc8-next20130424-3-iniza-small ehci_hcd [ 0.495172] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.495290] usb usb1: usb_probe_device [ 0.495293] usb usb1: configuration #1 chosen from 1 choice [ 0.495304] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 0.495335] hub 1-0:1.0: usb_probe_interface [ 0.495337] hub 1-0:1.0: usb_probe_interface - got id [ 0.495340] hub 1-0:1.0: USB hub found [ 0.495348] hub 1-0:1.0: 2 ports detected [ 0.495351] hub 1-0:1.0: standalone hub [ 0.495353] hub 1-0:1.0: no power switching (usb 1.0) [ 0.495354] hub 1-0:1.0: individual port over-current protection [ 0.495356] hub 1-0:1.0: power on to power good time: 20ms [ 0.495362] hub 1-0:1.0: local power source is good [ 0.495416] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 0.495643] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.495650] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.495659] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.495681] ehci-pci 0000:00:1d.0: debug port 2 [ 0.495688] ehci-pci 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2 [ 0.495691] ehci-pci 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr [ 0.495724] ehci-pci 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 0.499598] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.499599] ehci-pci 0000:00:1d.0: supports USB remote wakeup [ 0.499645] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.499652] ehci-pci 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN [ 0.511085] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.511128] usb usb2: default language 0x0409 [ 0.511140] usb usb2: udev 1, busnum 2, minor = 128 [ 0.511142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.511146] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.511150] usb usb2: Product: EHCI Host Controller [ 0.511154] usb usb2: Manufacturer: Linux 3.9.0-rc8-next20130424-3-iniza-small ehci_hcd [ 0.511158] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.511269] usb usb2: usb_probe_device [ 0.511271] usb usb2: configuration #1 chosen from 1 choice [ 0.511280] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 0.511309] hub 2-0:1.0: usb_probe_interface [ 0.511311] hub 2-0:1.0: usb_probe_interface - got id [ 0.511313] hub 2-0:1.0: USB hub found [ 0.511321] hub 2-0:1.0: 2 ports detected [ 0.511324] hub 2-0:1.0: standalone hub [ 0.511326] hub 2-0:1.0: no power switching (usb 1.0) [ 0.511327] hub 2-0:1.0: individual port over-current protection [ 0.511329] hub 2-0:1.0: power on to power good time: 20ms [ 0.511334] hub 2-0:1.0: local power source is good [ 0.511385] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 0.511459] ehci-platform: EHCI generic platform driver [ 0.511480] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.511484] ohci_hcd: block sizes: ed 80 td 96 [ 0.511523] uhci_hcd: USB Universal Host Controller Interface driver [ 0.511715] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.511725] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.521437] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.521506] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.521513] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.521520] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.521529] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.521536] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 0.521812] usb usb3: default language 0x0409 [ 0.521823] usb usb3: udev 1, busnum 3, minor = 256 [ 0.521825] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.521829] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.521833] usb usb3: Product: xHCI Host Controller [ 0.521837] usb usb3: Manufacturer: Linux 3.9.0-rc8-next20130424-3-iniza-small xhci_hcd [ 0.521841] usb usb3: SerialNumber: 0000:03:00.0 [ 0.521942] usb usb3: usb_probe_device [ 0.521944] usb usb3: configuration #1 chosen from 1 choice [ 0.521949] xHCI xhci_add_endpoint called for root hub [ 0.521951] xHCI xhci_check_bandwidth called for root hub [ 0.521957] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 0.521987] hub 3-0:1.0: usb_probe_interface [ 0.521989] hub 3-0:1.0: usb_probe_interface - got id [ 0.521991] hub 3-0:1.0: USB hub found [ 0.522006] hub 3-0:1.0: 2 ports detected [ 0.522009] hub 3-0:1.0: standalone hub [ 0.522010] hub 3-0:1.0: no power switching (usb 1.0) [ 0.522012] hub 3-0:1.0: individual port over-current protection [ 0.522013] hub 3-0:1.0: Single TT [ 0.522015] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.522017] hub 3-0:1.0: power on to power good time: 20ms [ 0.522022] hub 3-0:1.0: local power source is good [ 0.522059] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 0.522130] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.522137] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.522147] xhci_hcd 0000:03:00.0: supports USB remote wakeup [ 0.522182] usb usb4: skipped 1 descriptor after endpoint [ 0.522186] usb usb4: default language 0x0409 [ 0.522198] usb usb4: udev 1, busnum 4, minor = 384 [ 0.522200] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.522203] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.522207] usb usb4: Product: xHCI Host Controller [ 0.522211] usb usb4: Manufacturer: Linux 3.9.0-rc8-next20130424-3-iniza-small xhci_hcd [ 0.522215] usb usb4: SerialNumber: 0000:03:00.0 [ 0.522312] usb usb4: usb_probe_device [ 0.522314] usb usb4: configuration #1 chosen from 1 choice [ 0.522318] xHCI xhci_add_endpoint called for root hub [ 0.522319] xHCI xhci_check_bandwidth called for root hub [ 0.522325] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 0.522355] hub 4-0:1.0: usb_probe_interface [ 0.522357] hub 4-0:1.0: usb_probe_interface - got id [ 0.522359] hub 4-0:1.0: USB hub found [ 0.522373] hub 4-0:1.0: 2 ports detected [ 0.522376] hub 4-0:1.0: standalone hub [ 0.522378] hub 4-0:1.0: no power switching (usb 1.0) [ 0.522379] hub 4-0:1.0: individual port over-current protection [ 0.522381] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.522383] hub 4-0:1.0: power on to power good time: 20ms [ 0.522388] hub 4-0:1.0: local power source is good [ 0.522428] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 0.543132] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.552813] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.552821] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.553029] mousedev: PS/2 mouse device common for all mice [ 0.553473] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.553510] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.553569] device-mapper: uevent: version 1.0.3 [ 0.553643] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx [ 0.553654] Intel P-state driver initializing. [ 0.560472] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.571699] Intel pstate controlling: cpu 0 [ 0.571732] Intel pstate controlling: cpu 1 [ 0.571754] Intel pstate controlling: cpu 2 [ 0.571778] Intel pstate controlling: cpu 3 [ 0.572017] cpuidle: using governor ladder [ 0.572028] ledtrig-cpu: registered to indicate activity on CPUs [ 0.572031] EFI Variables Facility v0.08 2004-May-17 [ 0.572544] ashmem: initialized [ 0.572708] TCP: cubic registered [ 0.572799] NET: Registered protocol family 10 [ 0.573267] NET: Registered protocol family 17 [ 0.573294] Key type dns_resolver registered [ 0.573802] PM: Hibernation image not present or could not be loaded. [ 0.573804] Loading module verification certificates [ 0.575153] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 14a362c528e108a21fcb8f51f10f96c05a3111ea' [ 0.575192] registered taskstats version 1 [ 0.578482] Key type trusted registered [ 0.581833] Key type encrypted registered [ 0.585748] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.585753] EDD information not available. [ 0.595042] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.595049] hub 1-0:1.0: port 1: status 0501 change 0001 [ 0.611067] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT [ 0.611084] hub 2-0:1.0: port 1: status 0501 change 0001 [ 0.619140] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.619154] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 0.619167] hub 3-0:1.0: hub_suspend [ 0.619184] usb usb3: bus auto-suspend, wakeup 1 [ 0.619226] hub 4-0:1.0: hub_suspend [ 0.619231] usb usb4: bus auto-suspend, wakeup 1 [ 0.695122] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.695156] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.751233] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.751245] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.798981] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.800189] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.800204] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.801267] ata1.00: configured for UDMA/133 [ 0.801685] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.802129] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.802140] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.802182] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.802306] sd 0:0:0:0: [sda] Write Protect is off [ 0.802316] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.802411] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.806945] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.815631] sda: sda1 sda2 sda3 [ 0.816647] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.863150] ehci-pci 0000:00:1a.0: port 1 reset complete, port enabled [ 0.863162] ehci-pci 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 0.939586] usb 1-1: udev 2, busnum 1, minor = 1 [ 0.939597] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.939609] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.939918] usb 1-1: usb_probe_device [ 0.939924] usb 1-1: configuration #1 chosen from 1 choice [ 0.940148] usb 1-1: adding 1-1:1.0 (config #1, interface 0) [ 0.940212] hub 1-1:1.0: usb_probe_interface [ 0.940216] hub 1-1:1.0: usb_probe_interface - got id [ 0.940223] hub 1-1:1.0: USB hub found [ 0.940358] hub 1-1:1.0: 6 ports detected [ 0.940376] hub 1-1:1.0: standalone hub [ 0.940379] hub 1-1:1.0: individual port power switching [ 0.940383] hub 1-1:1.0: individual port over-current protection [ 0.940386] hub 1-1:1.0: Single TT [ 0.940389] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 0.940393] hub 1-1:1.0: power on to power good time: 100ms [ 0.940606] hub 1-1:1.0: local power source is good [ 0.941003] hub 1-1:1.0: enabling power on all ports [ 0.941902] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000 [ 0.941917] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s [ 0.995059] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 0.995074] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.039264] hub 1-1:1.0: port 2: status 0101 change 0001 [ 1.039699] hub 1-1:1.0: port 4: status 0101 change 0001 [ 1.054774] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.110974] ehci-pci 0000:00:1d.0: port 1 reset complete, port enabled [ 1.110987] ehci-pci 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.114758] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.115390] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.115406] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.116076] ata2.00: configured for UDMA/133 [ 1.116643] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.117183] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.117222] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.117515] sd 1:0:0:0: [sdb] Write Protect is off [ 1.117536] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.117757] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.118762] sdb: sdb1 sdb2 [ 1.119350] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.138735] usb 1-1: link qh256-0001/ffff88011860a840 start 1 [1/0 us] [ 1.187221] usb 2-1: udev 2, busnum 2, minor = 129 [ 1.187230] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.187241] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.187515] usb 2-1: usb_probe_device [ 1.187521] usb 2-1: configuration #1 chosen from 1 choice [ 1.187719] usb 2-1: adding 2-1:1.0 (config #1, interface 0) [ 1.187773] hub 2-1:1.0: usb_probe_interface [ 1.187777] hub 2-1:1.0: usb_probe_interface - got id [ 1.187782] hub 2-1:1.0: USB hub found [ 1.187932] hub 2-1:1.0: 6 ports detected [ 1.187941] hub 2-1:1.0: standalone hub [ 1.187945] hub 2-1:1.0: individual port power switching [ 1.187958] hub 2-1:1.0: individual port over-current protection [ 1.187961] hub 2-1:1.0: Single TT [ 1.187964] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) [ 1.187966] hub 2-1:1.0: power on to power good time: 100ms [ 1.188179] hub 2-1:1.0: local power source is good [ 1.188521] hub 2-1:1.0: enabling power on all ports [ 1.189414] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0000 [ 1.189586] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s [ 1.262837] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.291237] hub 2-1:1.0: port 5: status 0101 change 0001 [ 1.369776] usb 1-1.2: skipped 1 descriptor after interface [ 1.370253] usb 1-1.2: default language 0x0409 [ 1.372956] usb 1-1.2: udev 3, busnum 1, minor = 2 [ 1.372977] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.372985] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.372991] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.372996] usb 1-1.2: Manufacturer: Logitech [ 1.373234] usb 1-1.2: usb_probe_device [ 1.373238] usb 1-1.2: configuration #1 chosen from 1 choice [ 1.373832] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0) [ 1.374051] hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s [ 1.382510] tsc: Refined TSC clocksource calibration: 1596.373 MHz [ 1.382521] Switching to clocksource tsc [ 1.394484] usb 2-1: link qh256-0001/ffff88011860a740 start 1 [1/0 us] [ 1.434522] ata4: SATA link down (SStatus 0 SControl 300) [ 1.446704] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.692455] usb 1-1.4: skipped 1 descriptor after configuration [ 1.692463] usb 1-1.4: skipped 5 descriptors after interface [ 1.692468] usb 1-1.4: skipped 1 descriptor after endpoint [ 1.692471] usb 1-1.4: skipped 23 descriptors after interface [ 1.694525] usb 1-1.4: default language 0x0409 [ 1.706812] usb 1-1.4: udev 4, busnum 1, minor = 3 [ 1.706821] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.706831] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.706838] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.706843] usb 1-1.4: Manufacturer: 123 [ 1.707157] usb 1-1.4: usb_probe_device [ 1.707165] usb 1-1.4: configuration #1 chosen from 1 choice [ 1.707393] usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) [ 1.754318] ata5: SATA link down (SStatus 0 SControl 300) [ 1.756341] Freeing unused kernel memory: 1316k freed [ 1.756669] Write protecting the kernel read-only data: 12288k [ 1.760584] Freeing unused kernel memory: 1148k freed [ 1.763586] Freeing unused kernel memory: 1032k freed [ 1.787813] udevd[120]: starting version 175 [ 1.879302] usb 1-1.4: adding 1-1.4:1.1 (config #1, interface 1) [ 1.879383] hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 [ 1.879561] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0000 [ 1.879684] hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s [ 1.913687] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.915979] r8169 0000:02:00.0: irq 47 for MSI/MSI-X [ 1.916168] hidraw: raw HID events driver (C) Jiri Kosina [ 1.920616] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000620000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 47 [ 1.920630] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.921985] usbhid 1-1.2:1.0: usb_probe_interface [ 1.921991] usbhid 1-1.2:1.0: usb_probe_interface - got id [ 1.925756] usbcore: registered new interface driver usbhid [ 1.925763] usbhid: USB HID core driver [ 1.950137] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 1.972943] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 1.973269] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 2.050719] usb 2-1.5: udev 3, busnum 2, minor = 130 [ 2.050730] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 2.050742] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.051044] usb 2-1.5: usb_probe_device [ 2.051051] usb 2-1.5: configuration #1 chosen from 1 choice [ 2.051650] usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) [ 2.051997] usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) [ 2.788939] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 24.074661] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k FS [ 24.097391] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 24.135237] udevd[578]: starting version 175 [ 24.278373] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20130328/utaddress-251) [ 24.278385] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.278390] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 24.278396] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.278399] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 24.278403] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.278405] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20130328/utaddress-251) [ 24.278410] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 24.278412] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 24.394998] lp: driver loaded but no devices found [ 24.556711] wmi: Mapper loaded [ 24.567470] cfg80211: Calling CRDA to update world regulatory domain [ 24.659129] samsung_laptop: detected SABI interface: SwSmi@ [ 24.659135] samsung_laptop: Backlight controlled by ACPI video driver [ 24.799804] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 24.808636] type=1400 audit(1366837671.819:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=696 comm="apparmor_parser" [ 24.809151] type=1400 audit(1366837671.819:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=696 comm="apparmor_parser" [ 24.809459] type=1400 audit(1366837671.819:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=696 comm="apparmor_parser" [ 24.899206] cfg80211: World regulatory domain updated: [ 24.899212] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 24.899216] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.899219] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.899221] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 24.899223] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.899226] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 24.929832] Bluetooth: Core ver 2.16 [ 24.929892] NET: Registered protocol family 31 [ 24.929894] Bluetooth: HCI device and connection manager initialized [ 24.930066] Bluetooth: HCI socket layer initialized [ 24.930206] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 24.930607] Bluetooth: L2CAP socket layer initialized [ 24.931852] Bluetooth: SCO socket layer initialized [ 24.938890] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 24.939757] Linux video capture interface: v2.00 [ 24.943697] [drm] Initialized drm 1.1.0 20060810 [ 24.944920] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 24.949239] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 25.028051] btusb 2-1.5:1.0: usb_probe_interface [ 25.028057] btusb 2-1.5:1.0: usb_probe_interface - got id [ 25.028645] usbcore: registered new interface driver btusb [ 25.029303] usb 2-1.5: link qh1-0e01/ffff880090ef4bc0 start 0 [1/2 us] [ 25.413951] Intel(R) Wireless WiFi driver for Linux, in-tree:d [ 25.413957] Copyright(c) 2003-2013 Intel Corporation [ 25.414503] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 25.415803] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm [ 25.449421] init: failsafe main process (912) killed by TERM signal [ 25.525569] ppdev: user-space parallel port driver [ 25.545840] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 25.545845] Bluetooth: BNEP filters: protocol multicast [ 25.545864] Bluetooth: BNEP socket layer initialized [ 25.579699] Bluetooth: RFCOMM TTY layer initialized [ 25.579727] Bluetooth: RFCOMM socket layer initialized [ 25.579730] Bluetooth: RFCOMM ver 1.11 [ 25.604925] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 25.622163] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 25.700520] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input5 [ 25.795070] type=1400 audit(1366837672.807:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1056 comm="apparmor_parser" [ 25.795677] type=1400 audit(1366837672.807:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1056 comm="apparmor_parser" [ 25.796039] type=1400 audit(1366837672.807:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=1056 comm="apparmor_parser" [ 26.038594] type=1400 audit(1366837673.051:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1055 comm="apparmor_parser" [ 26.306172] type=1400 audit(1366837673.319:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/telepathy/mission-control-5" pid=1059 comm="apparmor_parser" [ 26.306212] type=1400 audit(1366837673.319:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=1060 comm="apparmor_parser" [ 26.306274] type=1400 audit(1366837673.319:11): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1054 comm="apparmor_parser" [ 26.375608] uvcvideo 1-1.4:1.0: usb_probe_interface [ 26.375617] uvcvideo 1-1.4:1.0: usb_probe_interface - got id [ 26.375670] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 26.395281] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input6 [ 26.395573] usbcore: registered new interface driver uvcvideo [ 26.395578] USB Video Class driver (1.1.1) [ 26.398039] usb 1-1.4: link qh16-0001/ffff880090ef47c0 start 2 [1/0 us] [ 26.398083] usb 1-1.4: unlink qh16-0001/ffff880090ef47c0 start 2 [1/0 us] [ 26.441055] [drm] Memory usable by graphics device = 2048M [ 26.441064] i915 0000:00:02.0: setting latency timer to 64 [ 26.474946] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 26.474967] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 26.474969] [drm] Driver supports precise vblank timestamp query. [ 26.475277] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 26.489597] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 26.489602] [drm] This can cause pipe underruns and display issues. [ 26.489604] [drm] Please upgrade your BIOS to fix this. [ 26.506589] fbcon: inteldrmfb (fb0) is primary device [ 26.525810] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG enabled [ 26.525812] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 26.525814] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 26.525815] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 26.525816] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled [ 26.525819] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 26.525870] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 26.595085] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 26.613515] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 26.620146] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 26.997470] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 27.004067] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 27.202515] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 27.564277] Console: switching to colour frame buffer device 170x48 [ 27.568307] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 27.568309] i915 0000:00:02.0: registered panic notifier [ 27.591400] acpi device:33: registered as cooling_device9 [ 27.591980] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 27.592341] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 27.592734] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 27.593113] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 27.608143] init: alsa-restore main process (1146) terminated with status 19 [ 27.680125] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 27.680352] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 27.680561] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 27.803987] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 27.906001] usb 1-1.2: link qh8-0e01/ffff88008facde40 start 3 [1/2 us] [ 28.791263] usb 1-1.4: usb auto-suspend, wakeup 0 [ 29.576650] usb usb4: usb auto-resume [ 29.576669] hub 4-0:1.0: hub_resume [ 29.576697] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.576750] hub 4-0:1.0: hub_suspend [ 29.576756] usb usb4: bus auto-suspend, wakeup 1 [ 29.576798] usb usb4: usb auto-resume [ 29.586511] hub 4-0:1.0: hub_resume [ 29.586548] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.586584] hub 4-0:1.0: hub_suspend [ 29.586590] usb usb4: bus auto-suspend, wakeup 1 [ 29.586659] usb usb3: usb auto-resume [ 29.586676] hub 3-0:1.0: hub_resume [ 29.586692] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.586710] hub 3-0:1.0: hub_suspend [ 29.586713] usb usb3: bus auto-suspend, wakeup 1 [ 29.586756] usb usb3: usb auto-resume [ 29.598502] hub 3-0:1.0: hub_resume [ 29.598530] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.598553] hub 3-0:1.0: hub_suspend [ 29.598561] usb usb3: bus auto-suspend, wakeup 1 [ 29.599013] usb 1-1.4: usb auto-resume [ 29.646769] usb 1-1.4: finish resume [ 29.653346] usb usb4: usb auto-resume [ 29.653362] hub 4-0:1.0: hub_resume [ 29.653395] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.653431] hub 4-0:1.0: hub_suspend [ 29.653437] usb usb4: bus auto-suspend, wakeup 1 [ 29.653460] usb usb4: usb auto-resume [ 29.666458] hub 4-0:1.0: hub_resume [ 29.666545] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.666573] usb usb3: usb auto-resume [ 29.666580] hub 4-0:1.0: hub_suspend [ 29.666585] usb usb4: bus auto-suspend, wakeup 1 [ 29.666594] hub 3-0:1.0: hub_resume [ 29.666614] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.666624] hub 3-0:1.0: hub_suspend [ 29.666628] usb usb3: bus auto-suspend, wakeup 1 [ 29.666644] usb usb3: usb auto-resume [ 29.678550] hub 3-0:1.0: hub_resume [ 29.678607] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.678626] hub 3-0:1.0: hub_suspend [ 29.678632] usb usb3: bus auto-suspend, wakeup 1 [ 29.679576] usb usb4: usb auto-resume [ 29.679592] hub 4-0:1.0: hub_resume [ 29.679626] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.679658] hub 4-0:1.0: hub_suspend [ 29.679662] usb usb4: bus auto-suspend, wakeup 1 [ 29.679713] usb usb4: usb auto-resume [ 29.690480] hub 4-0:1.0: hub_resume [ 29.690561] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.690594] usb usb3: usb auto-resume [ 29.690597] hub 4-0:1.0: hub_suspend [ 29.690602] usb usb4: bus auto-suspend, wakeup 1 [ 29.690611] hub 3-0:1.0: hub_resume [ 29.690631] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.690641] hub 3-0:1.0: hub_suspend [ 29.690645] usb usb3: bus auto-suspend, wakeup 1 [ 29.690661] usb usb3: usb auto-resume [ 29.702474] hub 3-0:1.0: hub_resume [ 29.702524] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.702535] hub 3-0:1.0: hub_suspend [ 29.702539] usb usb3: bus auto-suspend, wakeup 1 [ 29.707500] usb usb4: usb auto-resume [ 29.707515] hub 4-0:1.0: hub_resume [ 29.707544] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.707578] hub 4-0:1.0: hub_suspend [ 29.707583] usb usb4: bus auto-suspend, wakeup 1 [ 29.707619] usb usb4: usb auto-resume [ 29.718451] hub 4-0:1.0: hub_resume [ 29.718525] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.718558] usb usb3: usb auto-resume [ 29.718561] hub 4-0:1.0: hub_suspend [ 29.718566] usb usb4: bus auto-suspend, wakeup 1 [ 29.718575] hub 3-0:1.0: hub_resume [ 29.718595] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.718604] hub 3-0:1.0: hub_suspend [ 29.718608] usb usb3: bus auto-suspend, wakeup 1 [ 29.718625] usb usb3: usb auto-resume [ 29.730407] hub 3-0:1.0: hub_resume [ 29.730442] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.730475] hub 3-0:1.0: hub_suspend [ 29.730484] usb usb3: bus auto-suspend, wakeup 1 [ 29.740681] usb usb4: usb auto-resume [ 29.740698] hub 4-0:1.0: hub_resume [ 29.740725] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.740766] hub 4-0:1.0: hub_suspend [ 29.740773] usb usb4: bus auto-suspend, wakeup 1 [ 29.740811] usb usb4: usb auto-resume [ 29.750487] hub 4-0:1.0: hub_resume [ 29.750620] usb usb3: usb auto-resume [ 29.750640] hub 3-0:1.0: hub_resume [ 29.753293] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.753309] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.753346] hub 4-0:1.0: hub_suspend [ 29.753353] usb usb4: bus auto-suspend, wakeup 1 [ 29.753369] hub 3-0:1.0: hub_suspend [ 29.753374] usb usb3: bus auto-suspend, wakeup 1 [ 29.753580] usb usb4: usb auto-resume [ 29.762401] hub 4-0:1.0: hub_resume [ 29.762443] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.762475] hub 4-0:1.0: hub_suspend [ 29.762483] usb usb4: bus auto-suspend, wakeup 1 [ 29.762563] usb usb4: usb auto-resume [ 29.774486] hub 4-0:1.0: hub_resume [ 29.774532] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.774633] hub 4-0:1.0: hub_suspend [ 29.774643] usb usb4: bus auto-suspend, wakeup 1 [ 29.775176] usb usb3: usb auto-resume [ 29.775197] hub 3-0:1.0: hub_resume [ 29.775225] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.775234] hub 3-0:1.0: hub_suspend [ 29.775241] usb usb3: bus auto-suspend, wakeup 1 [ 29.775308] usb usb3: usb auto-resume [ 29.786702] hub 3-0:1.0: hub_resume [ 29.786735] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.786759] hub 3-0:1.0: hub_suspend [ 29.786769] usb usb3: bus auto-suspend, wakeup 1 [ 29.788564] usb usb4: usb auto-resume [ 29.788584] hub 4-0:1.0: hub_resume [ 29.788615] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.788658] hub 4-0:1.0: hub_suspend [ 29.788666] usb usb4: bus auto-suspend, wakeup 1 [ 29.788689] usb usb4: usb auto-resume [ 29.798353] hub 4-0:1.0: hub_resume [ 29.798438] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.798473] hub 4-0:1.0: hub_suspend [ 29.798479] usb usb3: usb auto-resume [ 29.798482] usb usb4: bus auto-suspend, wakeup 1 [ 29.798506] hub 3-0:1.0: hub_resume [ 29.803612] usb usb4: usb auto-resume [ 29.803629] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.803648] hub 3-0:1.0: hub_suspend [ 29.803657] usb usb3: bus auto-suspend, wakeup 1 [ 29.814888] hub 4-0:1.0: hub_resume [ 29.815091] usb usb3: usb auto-resume [ 29.815112] hub 3-0:1.0: hub_resume [ 29.822276] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.822294] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 29.822460] hub 4-0:1.0: hub_suspend [ 29.822474] usb usb4: bus auto-suspend, wakeup 1 [ 29.822491] hub 3-0:1.0: hub_suspend [ 29.822496] usb usb3: bus auto-suspend, wakeup 1 [ 30.824990] usb usb4: usb auto-resume [ 30.825008] hub 4-0:1.0: hub_resume [ 30.825033] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.825074] hub 4-0:1.0: hub_suspend [ 30.825079] usb usb4: bus auto-suspend, wakeup 1 [ 30.825118] usb usb4: usb auto-resume [ 30.833660] hub 4-0:1.0: hub_resume [ 30.833729] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.833766] hub 4-0:1.0: hub_suspend [ 30.833771] usb usb4: bus auto-suspend, wakeup 1 [ 30.833837] usb usb3: usb auto-resume [ 30.833856] hub 3-0:1.0: hub_resume [ 30.833872] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.833880] hub 3-0:1.0: hub_suspend [ 30.833884] usb usb3: bus auto-suspend, wakeup 1 [ 30.833926] usb usb3: usb auto-resume [ 30.845652] hub 3-0:1.0: hub_resume [ 30.845723] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.845732] hub 3-0:1.0: hub_suspend [ 30.845740] usb usb3: bus auto-suspend, wakeup 1 [ 30.847249] usb usb4: usb auto-resume [ 30.847265] hub 4-0:1.0: hub_resume [ 30.847287] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.847326] hub 4-0:1.0: hub_suspend [ 30.847330] usb usb4: bus auto-suspend, wakeup 1 [ 30.847367] usb usb4: usb auto-resume [ 30.857671] hub 4-0:1.0: hub_resume [ 30.857728] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.857757] hub 4-0:1.0: hub_suspend [ 30.857762] usb usb4: bus auto-suspend, wakeup 1 [ 30.857828] usb usb3: usb auto-resume [ 30.857845] hub 3-0:1.0: hub_resume [ 30.857860] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.857883] hub 3-0:1.0: hub_suspend [ 30.857886] usb usb3: bus auto-suspend, wakeup 1 [ 30.857928] usb usb3: usb auto-resume [ 30.869724] hub 3-0:1.0: hub_resume [ 30.869742] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.869749] hub 3-0:1.0: hub_suspend [ 30.869754] usb usb3: bus auto-suspend, wakeup 1 [ 30.870497] usb usb4: usb auto-resume [ 30.870510] hub 4-0:1.0: hub_resume [ 30.870527] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.870562] hub 4-0:1.0: hub_suspend [ 30.870565] usb usb4: bus auto-suspend, wakeup 1 [ 30.870602] usb usb4: usb auto-resume [ 30.881622] hub 4-0:1.0: hub_resume [ 30.881662] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.881715] hub 4-0:1.0: hub_suspend [ 30.881719] usb usb4: bus auto-suspend, wakeup 1 [ 30.881741] usb usb3: usb auto-resume [ 30.881757] hub 3-0:1.0: hub_resume [ 30.881770] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.881786] hub 3-0:1.0: hub_suspend [ 30.881789] usb usb3: bus auto-suspend, wakeup 1 [ 30.881827] usb usb3: usb auto-resume [ 30.893678] hub 3-0:1.0: hub_resume [ 30.893701] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.893722] hub 3-0:1.0: hub_suspend [ 30.893728] usb usb3: bus auto-suspend, wakeup 1 [ 30.899857] usb usb4: usb auto-resume [ 30.899872] hub 4-0:1.0: hub_resume [ 30.899895] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.899934] hub 4-0:1.0: hub_suspend [ 30.899938] usb usb4: bus auto-suspend, wakeup 1 [ 30.899983] usb usb4: usb auto-resume [ 30.909600] hub 4-0:1.0: hub_resume [ 30.909652] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.909703] hub 4-0:1.0: hub_suspend [ 30.909708] usb usb4: bus auto-suspend, wakeup 1 [ 30.909734] usb usb3: usb auto-resume [ 30.909751] hub 3-0:1.0: hub_resume [ 30.909765] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.909783] hub 3-0:1.0: hub_suspend [ 30.909786] usb usb3: bus auto-suspend, wakeup 1 [ 30.909825] usb usb3: usb auto-resume [ 30.921584] hub 3-0:1.0: hub_resume [ 30.921644] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.921661] hub 3-0:1.0: hub_suspend [ 30.921666] usb usb3: bus auto-suspend, wakeup 1 [ 30.922189] usb usb4: usb auto-resume [ 30.922202] hub 4-0:1.0: hub_resume [ 30.922218] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.922254] hub 4-0:1.0: hub_suspend [ 30.922258] usb usb4: bus auto-suspend, wakeup 1 [ 30.922296] usb usb4: usb auto-resume [ 30.933581] hub 4-0:1.0: hub_resume [ 30.933641] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.933675] hub 4-0:1.0: hub_suspend [ 30.933680] usb usb4: bus auto-suspend, wakeup 1 [ 30.933710] usb usb3: usb auto-resume [ 30.933726] hub 3-0:1.0: hub_resume [ 30.933741] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.933762] hub 3-0:1.0: hub_suspend [ 30.933766] usb usb3: bus auto-suspend, wakeup 1 [ 30.933809] usb usb3: usb auto-resume [ 30.945570] hub 3-0:1.0: hub_resume [ 30.945623] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.945636] hub 3-0:1.0: hub_suspend [ 30.945641] usb usb3: bus auto-suspend, wakeup 1 [ 30.946421] usb usb4: usb auto-resume [ 30.946435] hub 4-0:1.0: hub_resume [ 30.946454] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.946491] hub 4-0:1.0: hub_suspend [ 30.946494] usb usb4: bus auto-suspend, wakeup 1 [ 30.946534] usb usb4: usb auto-resume [ 30.957559] hub 4-0:1.0: hub_resume [ 30.957620] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.957655] hub 4-0:1.0: hub_suspend [ 30.957661] usb usb4: bus auto-suspend, wakeup 1 [ 30.957690] usb usb3: usb auto-resume [ 30.957706] hub 3-0:1.0: hub_resume [ 30.957722] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.957735] hub 3-0:1.0: hub_suspend [ 30.957740] usb usb3: bus auto-suspend, wakeup 1 [ 30.957783] usb usb3: usb auto-resume [ 30.969547] hub 3-0:1.0: hub_resume [ 30.969600] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.969613] hub 3-0:1.0: hub_suspend [ 30.969619] usb usb3: bus auto-suspend, wakeup 1 [ 30.970429] usb usb4: usb auto-resume [ 30.970444] hub 4-0:1.0: hub_resume [ 30.970464] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.970504] hub 4-0:1.0: hub_suspend [ 30.970508] usb usb4: bus auto-suspend, wakeup 1 [ 30.970549] usb usb4: usb auto-resume [ 30.981547] hub 4-0:1.0: hub_resume [ 30.981605] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.981639] hub 4-0:1.0: hub_suspend [ 30.981645] usb usb4: bus auto-suspend, wakeup 1 [ 30.981673] usb usb3: usb auto-resume [ 30.981690] hub 3-0:1.0: hub_resume [ 30.981706] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.981728] hub 3-0:1.0: hub_suspend [ 30.981732] usb usb3: bus auto-suspend, wakeup 1 [ 30.981775] usb usb3: usb auto-resume [ 30.993536] hub 3-0:1.0: hub_resume [ 30.993591] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.993624] hub 3-0:1.0: hub_suspend [ 30.993629] usb usb3: bus auto-suspend, wakeup 1 [ 30.995329] usb usb4: usb auto-resume [ 30.995343] hub 4-0:1.0: hub_resume [ 30.995362] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 30.995400] hub 4-0:1.0: hub_suspend [ 30.995405] usb usb4: bus auto-suspend, wakeup 1 [ 30.995422] usb usb4: usb auto-resume [ 31.005543] hub 4-0:1.0: hub_resume [ 31.005609] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.005638] hub 4-0:1.0: hub_suspend [ 31.005643] usb usb4: bus auto-suspend, wakeup 1 [ 31.005710] usb usb3: usb auto-resume [ 31.005726] hub 3-0:1.0: hub_resume [ 31.005741] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.005763] hub 3-0:1.0: hub_suspend [ 31.005766] usb usb3: bus auto-suspend, wakeup 1 [ 31.005806] usb usb3: usb auto-resume [ 31.017522] hub 3-0:1.0: hub_resume [ 31.017577] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.017601] hub 3-0:1.0: hub_suspend [ 31.017618] usb usb3: bus auto-suspend, wakeup 1 [ 31.019517] usb usb4: usb auto-resume [ 31.019531] hub 4-0:1.0: hub_resume [ 31.019550] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.019587] hub 4-0:1.0: hub_suspend [ 31.019590] usb usb4: bus auto-suspend, wakeup 1 [ 31.019628] usb usb4: usb auto-resume [ 31.029522] hub 4-0:1.0: hub_resume [ 31.029577] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.029611] hub 4-0:1.0: hub_suspend [ 31.029617] usb usb4: bus auto-suspend, wakeup 1 [ 31.029647] usb usb3: usb auto-resume [ 31.029663] hub 3-0:1.0: hub_resume [ 31.029679] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.029692] hub 3-0:1.0: hub_suspend [ 31.029697] usb usb3: bus auto-suspend, wakeup 1 [ 31.029741] usb usb3: usb auto-resume [ 31.041506] hub 3-0:1.0: hub_resume [ 31.041549] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.041563] hub 3-0:1.0: hub_suspend [ 31.041569] usb usb3: bus auto-suspend, wakeup 1 [ 31.042164] usb usb4: usb auto-resume [ 31.042177] hub 4-0:1.0: hub_resume [ 31.042195] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.042232] hub 4-0:1.0: hub_suspend [ 31.042235] usb usb4: bus auto-suspend, wakeup 1 [ 31.042274] usb usb4: usb auto-resume [ 31.053506] hub 4-0:1.0: hub_resume [ 31.053559] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.053593] hub 4-0:1.0: hub_suspend [ 31.053599] usb usb4: bus auto-suspend, wakeup 1 [ 31.053629] usb usb3: usb auto-resume [ 31.053646] hub 3-0:1.0: hub_resume [ 31.053661] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.053682] hub 3-0:1.0: hub_suspend [ 31.053686] usb usb3: bus auto-suspend, wakeup 1 [ 31.053729] usb usb3: usb auto-resume [ 31.065493] hub 3-0:1.0: hub_resume [ 31.065538] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.065552] hub 3-0:1.0: hub_suspend [ 31.065557] usb usb3: bus auto-suspend, wakeup 1 [ 31.068275] usb usb4: usb auto-resume [ 31.068289] hub 4-0:1.0: hub_resume [ 31.068311] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.068350] hub 4-0:1.0: hub_suspend [ 31.068354] usb usb4: bus auto-suspend, wakeup 1 [ 31.068397] usb usb4: usb auto-resume [ 31.077486] hub 4-0:1.0: hub_resume [ 31.077537] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.077571] hub 4-0:1.0: hub_suspend [ 31.077577] usb usb4: bus auto-suspend, wakeup 1 [ 31.077611] usb usb3: usb auto-resume [ 31.077628] hub 3-0:1.0: hub_resume [ 31.077643] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.077665] hub 3-0:1.0: hub_suspend [ 31.077668] usb usb3: bus auto-suspend, wakeup 1 [ 31.077712] usb usb3: usb auto-resume [ 31.089493] hub 3-0:1.0: hub_resume [ 31.089528] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.089546] hub 3-0:1.0: hub_suspend [ 31.089552] usb usb3: bus auto-suspend, wakeup 1 [ 31.090268] usb usb4: usb auto-resume [ 31.090282] hub 4-0:1.0: hub_resume [ 31.090300] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.090338] hub 4-0:1.0: hub_suspend [ 31.090342] usb usb4: bus auto-suspend, wakeup 1 [ 31.090382] usb usb4: usb auto-resume [ 31.101469] hub 4-0:1.0: hub_resume [ 31.101520] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.101561] hub 4-0:1.0: hub_suspend [ 31.101567] usb usb4: bus auto-suspend, wakeup 1 [ 31.101595] usb usb3: usb auto-resume [ 31.101612] hub 3-0:1.0: hub_resume [ 31.101627] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.101639] hub 3-0:1.0: hub_suspend [ 31.101645] usb usb3: bus auto-suspend, wakeup 1 [ 31.101688] usb usb3: usb auto-resume [ 31.113481] hub 3-0:1.0: hub_resume [ 31.113505] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.113525] hub 3-0:1.0: hub_suspend [ 31.113530] usb usb3: bus auto-suspend, wakeup 1 [ 31.114287] usb usb4: usb auto-resume [ 31.114301] hub 4-0:1.0: hub_resume [ 31.114320] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.114359] hub 4-0:1.0: hub_suspend [ 31.114363] usb usb4: bus auto-suspend, wakeup 1 [ 31.114404] usb usb4: usb auto-resume [ 31.125453] hub 4-0:1.0: hub_resume [ 31.125503] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.125543] hub 4-0:1.0: hub_suspend [ 31.125549] usb usb4: bus auto-suspend, wakeup 1 [ 31.125578] usb usb3: usb auto-resume [ 31.125594] hub 3-0:1.0: hub_resume [ 31.125610] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.125630] hub 3-0:1.0: hub_suspend [ 31.125633] usb usb3: bus auto-suspend, wakeup 1 [ 31.125677] usb usb3: usb auto-resume [ 31.137464] hub 3-0:1.0: hub_resume [ 31.137488] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.137507] hub 3-0:1.0: hub_suspend [ 31.137513] usb usb3: bus auto-suspend, wakeup 1 [ 31.138338] usb usb4: usb auto-resume [ 31.138352] hub 4-0:1.0: hub_resume [ 31.138371] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.138409] hub 4-0:1.0: hub_suspend [ 31.138413] usb usb4: bus auto-suspend, wakeup 1 [ 31.138454] usb usb4: usb auto-resume [ 31.149434] hub 4-0:1.0: hub_resume [ 31.149485] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.149524] hub 4-0:1.0: hub_suspend [ 31.149530] usb usb4: bus auto-suspend, wakeup 1 [ 31.149558] usb usb3: usb auto-resume [ 31.149575] hub 3-0:1.0: hub_resume [ 31.149590] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.149603] hub 3-0:1.0: hub_suspend [ 31.149607] usb usb3: bus auto-suspend, wakeup 1 [ 31.149651] usb usb3: usb auto-resume [ 31.161440] hub 3-0:1.0: hub_resume [ 31.161465] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.161489] hub 3-0:1.0: hub_suspend [ 31.161495] usb usb3: bus auto-suspend, wakeup 1 [ 31.162354] usb usb4: usb auto-resume [ 31.162368] hub 4-0:1.0: hub_resume [ 31.162389] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.162435] hub 4-0:1.0: hub_suspend [ 31.162441] usb usb4: bus auto-suspend, wakeup 1 [ 31.162461] usb usb4: usb auto-resume [ 31.173417] hub 4-0:1.0: hub_resume [ 31.173467] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.173507] hub 4-0:1.0: hub_suspend [ 31.173512] usb usb4: bus auto-suspend, wakeup 1 [ 31.173541] usb usb3: usb auto-resume [ 31.173557] hub 3-0:1.0: hub_resume [ 31.173573] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.173581] hub 3-0:1.0: hub_suspend [ 31.173586] usb usb3: bus auto-suspend, wakeup 1 [ 31.173628] usb usb3: usb auto-resume [ 31.185427] hub 3-0:1.0: hub_resume [ 31.185452] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.185473] hub 3-0:1.0: hub_suspend [ 31.185479] usb usb3: bus auto-suspend, wakeup 1 [ 31.186749] usb usb4: usb auto-resume [ 31.186763] hub 4-0:1.0: hub_resume [ 31.186784] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.186824] hub 4-0:1.0: hub_suspend [ 31.186828] usb usb4: bus auto-suspend, wakeup 1 [ 31.186874] usb usb4: usb auto-resume [ 31.197399] hub 4-0:1.0: hub_resume [ 31.197450] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.197490] hub 4-0:1.0: hub_suspend [ 31.197495] usb usb4: bus auto-suspend, wakeup 1 [ 31.197523] usb usb3: usb auto-resume [ 31.197540] hub 3-0:1.0: hub_resume [ 31.197556] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.197576] hub 3-0:1.0: hub_suspend [ 31.197579] usb usb3: bus auto-suspend, wakeup 1 [ 31.197622] usb usb3: usb auto-resume [ 31.209407] hub 3-0:1.0: hub_resume [ 31.209433] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.209452] hub 3-0:1.0: hub_suspend [ 31.209458] usb usb3: bus auto-suspend, wakeup 1 [ 31.211196] usb usb4: usb auto-resume [ 31.211210] hub 4-0:1.0: hub_resume [ 31.211231] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.211270] hub 4-0:1.0: hub_suspend [ 31.211275] usb usb4: bus auto-suspend, wakeup 1 [ 31.211318] usb usb4: usb auto-resume [ 31.221385] hub 4-0:1.0: hub_resume [ 31.221435] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.221474] hub 4-0:1.0: hub_suspend [ 31.221480] usb usb4: bus auto-suspend, wakeup 1 [ 31.221513] usb usb3: usb auto-resume [ 31.221529] hub 3-0:1.0: hub_resume [ 31.221545] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.221556] hub 3-0:1.0: hub_suspend [ 31.221561] usb usb3: bus auto-suspend, wakeup 1 [ 31.221604] usb usb3: usb auto-resume [ 31.233395] hub 3-0:1.0: hub_resume [ 31.233418] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.233438] hub 3-0:1.0: hub_suspend [ 31.233443] usb usb3: bus auto-suspend, wakeup 1 [ 31.234232] usb usb4: usb auto-resume [ 31.234246] hub 4-0:1.0: hub_resume [ 31.234266] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.234305] hub 4-0:1.0: hub_suspend [ 31.234309] usb usb4: bus auto-suspend, wakeup 1 [ 31.234351] usb usb4: usb auto-resume [ 31.245363] hub 4-0:1.0: hub_resume [ 31.245415] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.245454] hub 4-0:1.0: hub_suspend [ 31.245460] usb usb4: bus auto-suspend, wakeup 1 [ 31.245489] usb usb3: usb auto-resume [ 31.245506] hub 3-0:1.0: hub_resume [ 31.245521] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.245533] hub 3-0:1.0: hub_suspend [ 31.245537] usb usb3: bus auto-suspend, wakeup 1 [ 31.245580] usb usb3: usb auto-resume [ 31.257375] hub 3-0:1.0: hub_resume [ 31.257400] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.257420] hub 3-0:1.0: hub_suspend [ 31.257426] usb usb3: bus auto-suspend, wakeup 1 [ 31.258412] usb usb4: usb auto-resume [ 31.258427] hub 4-0:1.0: hub_resume [ 31.258448] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.258489] hub 4-0:1.0: hub_suspend [ 31.258494] usb usb4: bus auto-suspend, wakeup 1 [ 31.258508] usb usb4: usb auto-resume [ 31.269351] hub 4-0:1.0: hub_resume [ 31.269400] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.269432] hub 4-0:1.0: hub_suspend [ 31.269438] usb usb4: bus auto-suspend, wakeup 1 [ 31.269473] usb usb3: usb auto-resume [ 31.269489] hub 3-0:1.0: hub_resume [ 31.269505] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.269513] hub 3-0:1.0: hub_suspend [ 31.269517] usb usb3: bus auto-suspend, wakeup 1 [ 31.269561] usb usb3: usb auto-resume [ 31.281355] hub 3-0:1.0: hub_resume [ 31.281380] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.281403] hub 3-0:1.0: hub_suspend [ 31.281409] usb usb3: bus auto-suspend, wakeup 1 [ 31.282377] usb usb4: usb auto-resume [ 31.282392] hub 4-0:1.0: hub_resume [ 31.282413] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.282455] hub 4-0:1.0: hub_suspend [ 31.282460] usb usb4: bus auto-suspend, wakeup 1 [ 31.282487] usb usb4: usb auto-resume [ 31.293330] hub 4-0:1.0: hub_resume [ 31.293381] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.293423] hub 4-0:1.0: hub_suspend [ 31.293428] usb usb4: bus auto-suspend, wakeup 1 [ 31.293456] usb usb3: usb auto-resume [ 31.293473] hub 3-0:1.0: hub_resume [ 31.293489] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.293497] hub 3-0:1.0: hub_suspend [ 31.293501] usb usb3: bus auto-suspend, wakeup 1 [ 31.293544] usb usb3: usb auto-resume [ 31.305338] hub 3-0:1.0: hub_resume [ 31.305377] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.305397] hub 3-0:1.0: hub_suspend [ 31.305403] usb usb3: bus auto-suspend, wakeup 1 [ 31.306579] usb usb4: usb auto-resume [ 31.306593] hub 4-0:1.0: hub_resume [ 31.306616] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.306658] hub 4-0:1.0: hub_suspend [ 31.306663] usb usb4: bus auto-suspend, wakeup 1 [ 31.306683] usb usb4: usb auto-resume [ 31.317318] hub 4-0:1.0: hub_resume [ 31.317367] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.317407] hub 4-0:1.0: hub_suspend [ 31.317413] usb usb4: bus auto-suspend, wakeup 1 [ 31.317441] usb usb3: usb auto-resume [ 31.317457] hub 3-0:1.0: hub_resume [ 31.317472] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.317485] hub 3-0:1.0: hub_suspend [ 31.317490] usb usb3: bus auto-suspend, wakeup 1 [ 31.317533] usb usb3: usb auto-resume [ 31.329325] hub 3-0:1.0: hub_resume [ 31.329351] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.329365] hub 3-0:1.0: hub_suspend [ 31.329371] usb usb3: bus auto-suspend, wakeup 1 [ 32.331267] usb usb4: usb auto-resume [ 32.331288] hub 4-0:1.0: hub_resume [ 32.331328] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.331381] hub 4-0:1.0: hub_suspend [ 32.331388] usb usb4: bus auto-suspend, wakeup 1 [ 32.331451] usb usb4: usb auto-resume [ 32.340602] hub 4-0:1.0: hub_resume [ 32.340652] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.340684] hub 4-0:1.0: hub_suspend [ 32.340691] usb usb4: bus auto-suspend, wakeup 1 [ 32.340767] usb usb3: usb auto-resume [ 32.340784] hub 3-0:1.0: hub_resume [ 32.340801] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.340815] hub 3-0:1.0: hub_suspend [ 32.340820] usb usb3: bus auto-suspend, wakeup 1 [ 32.340866] usb usb3: usb auto-resume [ 32.352595] hub 3-0:1.0: hub_resume [ 32.352631] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.352654] hub 3-0:1.0: hub_suspend [ 32.352660] usb usb3: bus auto-suspend, wakeup 1 [ 32.354425] usb usb4: usb auto-resume [ 32.354439] hub 4-0:1.0: hub_resume [ 32.354458] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.354495] hub 4-0:1.0: hub_suspend [ 32.354499] usb usb4: bus auto-suspend, wakeup 1 [ 32.354540] usb usb4: usb auto-resume [ 32.364581] hub 4-0:1.0: hub_resume [ 32.364634] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.364676] hub 4-0:1.0: hub_suspend [ 32.364681] usb usb4: bus auto-suspend, wakeup 1 [ 32.364707] usb usb3: usb auto-resume [ 32.364723] hub 3-0:1.0: hub_resume [ 32.364737] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.364744] hub 3-0:1.0: hub_suspend [ 32.364749] usb usb3: bus auto-suspend, wakeup 1 [ 32.364787] usb usb3: usb auto-resume [ 32.376576] hub 3-0:1.0: hub_resume [ 32.376614] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.376627] hub 3-0:1.0: hub_suspend [ 32.376632] usb usb3: bus auto-suspend, wakeup 1 [ 32.378487] usb usb4: usb auto-resume [ 32.378501] hub 4-0:1.0: hub_resume [ 32.378520] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.378557] hub 4-0:1.0: hub_suspend [ 32.378560] usb usb4: bus auto-suspend, wakeup 1 [ 32.378601] usb usb4: usb auto-resume [ 32.388555] hub 4-0:1.0: hub_resume [ 32.388605] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.388639] hub 4-0:1.0: hub_suspend [ 32.388645] usb usb4: bus auto-suspend, wakeup 1 [ 32.388675] usb usb3: usb auto-resume [ 32.388691] hub 3-0:1.0: hub_resume [ 32.388707] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.388727] hub 3-0:1.0: hub_suspend [ 32.388731] usb usb3: bus auto-suspend, wakeup 1 [ 32.388774] usb usb3: usb auto-resume [ 32.400556] hub 3-0:1.0: hub_resume [ 32.400591] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.400605] hub 3-0:1.0: hub_suspend [ 32.400611] usb usb3: bus auto-suspend, wakeup 1 [ 32.401433] usb usb4: usb auto-resume [ 32.401447] hub 4-0:1.0: hub_resume [ 32.401467] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.401505] hub 4-0:1.0: hub_suspend [ 32.401509] usb usb4: bus auto-suspend, wakeup 1 [ 32.401550] usb usb4: usb auto-resume [ 32.412540] hub 4-0:1.0: hub_resume [ 32.412590] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.412623] hub 4-0:1.0: hub_suspend [ 32.412629] usb usb4: bus auto-suspend, wakeup 1 [ 32.412659] usb usb3: usb auto-resume [ 32.412676] hub 3-0:1.0: hub_resume [ 32.412691] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.412712] hub 3-0:1.0: hub_suspend [ 32.412715] usb usb3: bus auto-suspend, wakeup 1 [ 32.412759] usb usb3: usb auto-resume [ 32.424524] hub 3-0:1.0: hub_resume [ 32.424569] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.424589] hub 3-0:1.0: hub_suspend [ 32.424596] usb usb3: bus auto-suspend, wakeup 1 [ 32.426023] usb usb4: usb auto-resume [ 32.426039] hub 4-0:1.0: hub_resume [ 32.426064] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.426111] hub 4-0:1.0: hub_suspend [ 32.426117] usb usb4: bus auto-suspend, wakeup 1 [ 32.426137] usb usb4: usb auto-resume [ 32.436534] hub 4-0:1.0: hub_resume [ 32.436587] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.436624] hub 4-0:1.0: hub_suspend [ 32.436630] usb usb4: bus auto-suspend, wakeup 1 [ 32.436691] usb usb3: usb auto-resume [ 32.436707] hub 3-0:1.0: hub_resume [ 32.436723] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.436731] hub 3-0:1.0: hub_suspend [ 32.436735] usb usb3: bus auto-suspend, wakeup 1 [ 32.436773] usb usb3: usb auto-resume [ 32.448533] hub 3-0:1.0: hub_resume [ 32.448571] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.448585] hub 3-0:1.0: hub_suspend [ 32.448590] usb usb3: bus auto-suspend, wakeup 1 [ 32.450598] usb usb4: usb auto-resume [ 32.450612] hub 4-0:1.0: hub_resume [ 32.450631] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.450667] hub 4-0:1.0: hub_suspend [ 32.450670] usb usb4: bus auto-suspend, wakeup 1 [ 32.450707] usb usb4: usb auto-resume [ 32.460522] hub 4-0:1.0: hub_resume [ 32.460604] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.460644] hub 4-0:1.0: hub_suspend [ 32.460648] usb usb3: usb auto-resume [ 32.460654] usb usb4: bus auto-suspend, wakeup 1 [ 32.460666] hub 3-0:1.0: hub_resume [ 32.460689] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.460700] hub 3-0:1.0: hub_suspend [ 32.460704] usb usb3: bus auto-suspend, wakeup 1 [ 32.460725] usb usb3: usb auto-resume [ 32.472508] hub 3-0:1.0: hub_resume [ 32.472578] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.472597] hub 3-0:1.0: hub_suspend [ 32.472604] usb usb3: bus auto-suspend, wakeup 1 [ 32.474925] usb usb4: usb auto-resume [ 32.474941] hub 4-0:1.0: hub_resume [ 32.474997] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.475054] hub 4-0:1.0: hub_suspend [ 32.475060] usb usb4: bus auto-suspend, wakeup 1 [ 32.475115] usb usb4: usb auto-resume [ 32.484547] hub 4-0:1.0: hub_resume [ 32.484615] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.484660] hub 4-0:1.0: hub_suspend [ 32.484666] usb usb4: bus auto-suspend, wakeup 1 [ 32.484671] usb usb3: usb auto-resume [ 32.484691] hub 3-0:1.0: hub_resume [ 32.484737] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.484768] hub 3-0:1.0: hub_suspend [ 32.484773] usb usb3: bus auto-suspend, wakeup 1 [ 32.484853] usb usb3: usb auto-resume [ 32.496584] hub 3-0:1.0: hub_resume [ 32.496637] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.496652] hub 3-0:1.0: hub_suspend [ 32.496666] usb usb3: bus auto-suspend, wakeup 1 [ 32.519022] usb usb4: usb auto-resume [ 32.519040] hub 4-0:1.0: hub_resume [ 32.519065] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.519104] hub 4-0:1.0: hub_suspend [ 32.519110] usb usb4: bus auto-suspend, wakeup 1 [ 32.519154] usb usb4: usb auto-resume [ 32.528471] hub 4-0:1.0: hub_resume [ 32.528529] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.528570] hub 4-0:1.0: hub_suspend [ 32.528574] usb usb4: bus auto-suspend, wakeup 1 [ 32.528600] usb usb3: usb auto-resume [ 32.528617] hub 3-0:1.0: hub_resume [ 32.528632] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.528651] hub 3-0:1.0: hub_suspend [ 32.528654] usb usb3: bus auto-suspend, wakeup 1 [ 32.528695] usb usb3: usb auto-resume [ 32.540516] hub 3-0:1.0: hub_resume [ 32.540558] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 32.540571] hub 3-0:1.0: hub_suspend [ 32.540579] usb usb3: bus auto-suspend, wakeup 1 [ 33.371570] wlan0: authenticate with 00:04:0e:e4:00:3d [ 33.375677] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 33.377424] wlan0: authenticated [ 33.377635] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 33.377641] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 33.379816] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 33.383908] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 33.388683] wlan0: associated [ 33.388771] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 34.770920] usb 1-1.4: usb auto-suspend, wakeup 0 [ 76.653221] wlan0: deauthenticating from 00:04:0e:e4:00:3d by local choice (reason=3) [ 76.662931] cfg80211: Calling CRDA to update world regulatory domain [ 76.668487] cfg80211: World regulatory domain updated: [ 76.668493] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 76.668497] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.668500] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 76.668503] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 76.668505] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 76.668508] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 78.475652] PM: Syncing filesystems ... done. [ 78.477727] PM: Preparing system for mem sleep [ 78.478079] Freezing user space processes ... (elapsed 0.02 seconds) done. [ 78.498484] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [ 78.514489] PM: Entering mem sleep [ 78.514569] Suspending console(s) (use no_console_suspend to debug) [ 78.515010] usb 2-1.5: unlink qh1-0e01/ffff880090ef4bc0 start 0 [1/2 us] [ 78.515030] usb 1-1.2: unlink qh8-0e01/ffff88008facde40 start 3 [1/2 us] [ 78.515038] sd 1:0:0:0: [sdb] Synchronizing SCSI cache [ 78.515089] sd 0:0:0:0: [sda] Synchronizing SCSI cache [ 78.517212] usb 1-1.2: usb suspend, wakeup 0 [ 78.517245] hub 1-1:1.0: hub_suspend [ 78.517259] usb 1-1: unlink qh256-0001/ffff88011860a840 start 1 [1/0 us] [ 78.517641] usb 2-1: clear tt buffer port 5, a3 ep2 t04048d80 [ 78.517685] usb 2-1.5: usb suspend, wakeup 0 [ 78.517756] hub 2-1:1.0: hub_suspend [ 78.517762] usb 2-1: unlink qh256-0001/ffff88011860a740 start 1 [1/0 us] [ 78.517973] sd 1:0:0:0: [sdb] Stopping disk [ 78.519427] usb 1-1: usb suspend, wakeup 0 [ 78.519949] usb 2-1: usb suspend, wakeup 0 [ 78.529936] usb usb4: usb auto-resume [ 78.529952] hub 4-0:1.0: hub_resume [ 78.529955] usb usb3: usb auto-resume [ 78.529956] hub 2-0:1.0: hub_suspend [ 78.529962] usb usb2: bus suspend, wakeup 0 [ 78.529964] ehci-pci 0000:00:1d.0: suspend root hub [ 78.529977] hub 3-0:1.0: hub_resume [ 78.529992] hub 4-0:1.0: hub_suspend [ 78.529994] hub 3-0:1.0: hub_suspend [ 78.529996] usb usb4: bus suspend, wakeup 0 [ 78.529997] usb usb3: bus suspend, wakeup 0 [ 78.530060] hub 1-0:1.0: hub_suspend [ 78.530063] usb usb1: bus suspend, wakeup 0 [ 78.530064] ehci-pci 0000:00:1a.0: suspend root hub [ 78.530418] mei_me 0000:00:16.0: suspend [ 78.592484] sd 0:0:0:0: [sda] Stopping disk [ 79.198049] PM: suspend of devices complete after 683.662 msecs [ 79.198291] PM: late suspend of devices complete after 0.239 msecs [ 79.198549] xhci_hcd 0000:03:00.0: wakeup: 1 [ 79.213877] xhci_hcd 0000:03:00.0: --> PCI D3hot [ 79.213961] r8169 0000:02:00.0: System wakeup enabled by ACPI [ 79.245935] ehci-pci 0000:00:1d.0: wakeup: 1 [ 79.261817] ehci-pci 0000:00:1d.0: --> PCI D3hot [ 79.262000] ehci-pci 0000:00:1a.0: wakeup: 1 [ 79.277806] ehci-pci 0000:00:1a.0: --> PCI D3hot [ 79.293848] PM: noirq suspend of devices complete after 95.623 msecs [ 79.294114] ACPI: Preparing to enter system sleep state S3 [ 79.295371] PM: Saving platform NVS memory [ 79.297137] Disabling non-boot CPUs ... [ 79.298852] smpboot: CPU 1 is now offline [ 79.401721] smpboot: CPU 2 is now offline [ 79.402709] Broke affinity for irq 1 [ 79.505647] smpboot: CPU 3 is now offline [ 79.507742] ACPI: Low-level resume complete [ 79.507796] PM: Restoring platform NVS memory [ 79.509081] Enabling non-boot CPUs ... [ 79.510162] smpboot: Booting Node 0 Processor 1 APIC 0x1 [ 79.521169] Disabled fast string operations [ 79.523586] Intel pstate controlling: cpu 1 [ 79.523682] CPU1 is up [ 79.524754] smpboot: Booting Node 0 Processor 2 APIC 0x2 [ 79.535792] Disabled fast string operations [ 79.538250] Intel pstate controlling: cpu 2 [ 79.538345] CPU2 is up [ 79.539407] smpboot: Booting Node 0 Processor 3 APIC 0x3 [ 79.550443] Disabled fast string operations [ 79.552935] Intel pstate controlling: cpu 3 [ 79.553028] CPU3 is up [ 79.557942] ACPI: Waking up from system sleep state S3 [ 79.704337] PM: noirq resume of devices complete after 141.798 msecs [ 79.704586] PM: early resume of devices complete after 0.212 msecs [ 79.704655] i915 0000:00:02.0: setting latency timer to 64 [ 79.704679] mei_me 0000:00:16.0: irq 40 for MSI/MSI-X [ 79.704822] ahci 0000:00:1f.2: setting latency timer to 64 [ 79.705017] r8169 0000:02:00.0: System wakeup disabled by ACPI [ 79.705019] iwlwifi 0000:01:00.0: RF_KILL bit toggled to enable radio. [ 79.705081] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 79.705128] usb usb3: root hub lost power or was reset [ 79.705130] usb usb4: root hub lost power or was reset [ 79.705381] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 79.705736] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 79.709853] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 79.709864] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 79.709875] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 79.709885] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 79.709896] xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X [ 79.711422] usb usb1: usb resume [ 79.711426] ehci-pci 0000:00:1a.0: resume root hub [ 79.711833] usb usb2: usb resume [ 79.711836] ehci-pci 0000:00:1d.0: resume root hub [ 79.712102] [drm] Wrong MCH_SSKPD value: 0x16040307 [ 79.712104] [drm] This can cause pipe underruns and display issues. [ 79.712104] [drm] Please upgrade your BIOS to fix this. [ 79.712180] usb usb3: usb resume [ 79.712206] hub 3-0:1.0: hub_reset_resume [ 79.712208] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 79.713787] usb usb4: usb resume [ 79.713807] hub 4-0:1.0: hub_reset_resume [ 79.713810] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 79.743147] hub 2-0:1.0: hub_resume [ 79.743152] hub 1-0:1.0: hub_resume [ 79.743182] hub 2-0:1.0: port 1: status 0503 change 0000 [ 79.743185] hub 1-0:1.0: port 1: status 0503 change 0000 [ 79.743239] usb 1-1: finish resume [ 79.743242] usb 2-1: finish resume [ 79.743418] hub 2-1:1.0: hub_resume [ 79.743443] hub 1-1:1.0: hub_resume [ 79.743954] hub 1-1:1.0: port 2: status 0101 change 0001 [ 79.744383] hub 1-1:1.0: port 4: status 0101 change 0001 [ 79.744390] hub 2-1:1.0: port 5: status 0101 change 0001 [ 79.848031] ehci-pci 0000:00:1a.0: reused qh ffff88011860a840 schedule [ 79.848035] ehci-pci 0000:00:1d.0: reused qh ffff88011860a740 schedule [ 79.848038] usb 1-1: link qh256-0001/ffff88011860a840 start 1 [1/0 us] [ 79.848041] usb 2-1: link qh256-0001/ffff88011860a740 start 1 [1/0 us] [ 79.848138] usb 1-1.2: finish reset-resume [ 79.848155] usb 2-1.5: finish reset-resume [ 79.848416] usb 1-1.4: finish reset-resume [ 80.043899] ata5: SATA link down (SStatus 0 SControl 300) [ 80.055891] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 80.060113] ata2.00: configured for UDMA/133 [ 80.063830] ata4: SATA link down (SStatus 0 SControl 300) [ 80.075917] sd 1:0:0:0: [sdb] Starting disk [ 80.108041] usb 1-1.2: reset low-speed USB device number 3 using ehci-pci [ 80.394199] usb 1-1.2: link qh8-0e01/ffff88008facde40 start 4 [1/2 us] [ 80.459795] usb 2-1.5: reset full-speed USB device number 3 using ehci-pci [ 80.554585] btusb 2-1.5:1.0: no reset_resume for driver btusb? [ 80.554589] btusb 2-1.5:1.1: no reset_resume for driver btusb? [ 80.554594] btusb 2-1.5:1.0: forced unbind [ 80.623646] usb 1-1.4: reset high-speed USB device number 4 using ehci-pci [ 80.759572] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 82.174381] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 82.176647] ata1.00: configured for UDMA/133 [ 82.190388] sd 0:0:0:0: [sda] Starting disk [ 82.219232] PM: resume of devices complete after 2516.422 msecs [ 82.219284] btusb 2-1.5:1.0: usb_probe_interface [ 82.219286] btusb 2-1.5:1.0: usb_probe_interface - got id [ 82.220068] usb 2-1.5: link qh1-0e01/ffff880090491640 start 0 [1/2 us] [ 82.220310] PM: Finishing wakeup. [ 82.220375] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 82.220382] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 82.220387] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 82.220392] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 82.220397] hub 1-1:1.0: state 7 ports 6 chg 0014 evt 0004 [ 82.225319] hub 1-1:1.0: port 2, status 0303, change 0000, 1.5 Mb/s [ 82.225429] hub 1-1:1.0: port 4, status 0503, change 0000, 480 Mb/s [ 82.225439] hub 2-1:1.0: state 7 ports 6 chg 0020 evt 0020 [ 82.225549] hub 2-1:1.0: port 5, status 0103, change 0000, 12 Mb/s [ 82.229293] hub 4-0:1.0: hub_suspend [ 82.229305] usb usb4: bus auto-suspend, wakeup 1 [ 82.229324] hub 3-0:1.0: hub_suspend [ 82.229329] usb usb3: bus auto-suspend, wakeup 1 [ 82.220312] Restarting tasks ... done. [ 82.237054] video LNXVIDEO:00: Restoring backlight state [ 82.692073] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 82.698785] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 82.903186] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 83.769515] usb 1-1.4: usb auto-suspend, wakeup 0 [ 109.238972] wlan0: authenticate with 00:04:0e:e4:00:3d [ 109.242732] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 109.244557] wlan0: authenticated [ 109.244716] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 109.244720] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 109.247128] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 109.251518] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 109.256502] wlan0: associated [ 109.256603] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Attachment:
config-3.9.0-rc8-next20130424-3-iniza-small
Description: Binary data
Attachment:
dmesg_3.9.0-rc8-next20130424-3-iniza-small_after-s-r.diff
Description: Binary data
