On Fri, Jan 25, 2013 at 6:26 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
> Hi all,
>
> Changes since 20130124:
>
> New trees: ipsec and ipsec-next
>
> The powerpc tree still had a build failure.
>
> The sound-asoc tree still had its build failure so I used the version from
> next-20130122.
>
> The akpm tree lost its build failure and several patches that turned up
> elsewhere.
>
> ----------------------------------------------------------------------------
>
Unfortunately, on suspend or running the pm_test/freezer leads here to
a frozen machine - hard reset.
I see 4-5 pages of call-traces but dunno how to log them in such a f-u-ed state.
Any hints welcome!
As I saw catched with my left eye on one call-trace sth. with...
kernel/watchdog.c (line #245, watchdog_overflow_callback)
... I tried to revert the last two commits from Sascha (see -3 patch,
but no success.
The same with reverting all cpu-freq changes since v3.8-rc4 (see -4
patch) after seeing some suspicious lines on the screen.
Can someone confirm that suspend is BROKEN for him/her before doing
eventually a bisect?
Thanks!
Regards,
- Sedat -
[1] http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git;a=blob;f=kernel/watchdog.c;hb=refs/tags/next-20130125#l245
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.8.0-rc4-next20130125-1-iniza-generic (sedat.dilek@xxxxxxxxx@fambox) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Fri Jan 25 11:53:41 CET 2013 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-rc4-next20130125-1-iniza-generic root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] Disabled fast string operations [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable [ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000d9c9efff] usable [ 0.000000] BIOS-e820: [mem 0x00000000d9c9f000-0x00000000dae7efff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000dae7f000-0x00000000daf9efff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable [ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011fdfffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: SAMSUNG ELECTRONICS CO., LTD. 530U3BI/530U4BI/530U4BH/530U3BI/530U4BI/530U4BH, BIOS 11XK 11/06/2012 [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] No AGP bridge found [ 0.000000] e820: last_pfn = 0x11fe00 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back [ 0.000000] 3 base 0DC000000 mask FFC000000 uncachable [ 0.000000] 4 base 0DB000000 mask FFF000000 uncachable [ 0.000000] 5 base 100000000 mask FE0000000 write-back [ 0.000000] 6 base 11FE00000 mask FFFE00000 uncachable [ 0.000000] 7 base 0FFC00000 mask FFFC00000 write-protect [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000f00e0-0x000f00ef] mapped at [ffff8800000f00e0] [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff] [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576 [ 0.000000] reserving inaccessible SNB gfx pages [ 0.000000] init_memory_mapping: [mem 0x00000000-0xdaffffff] [ 0.000000] [mem 0x00000000-0xdaffffff] page 2M [ 0.000000] kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff] [ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fdfffff] [ 0.000000] [mem 0x100000000-0x11fdfffff] page 2M [ 0.000000] kernel direct mapping tables up to 0x11fdfffff @ [mem 0xd9c9d000-0xd9c9efff] [ 0.000000] RAMDISK: [mem 0x379e0000-0x37ce7fff] [ 0.000000] ACPI: RSDP 00000000000f0100 00024 (v02 SECCSD) [ 0.000000] ACPI: XSDT 00000000daffe170 0008C (v01 SECCSD LH43STAR 00000002 PTEC 00000002) [ 0.000000] ACPI: FACP 00000000dafef000 0010C (v05 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: DSDT 00000000daff2000 083AC (v02 SECCSD SNB-CPT 00000000 INTL 20061109) [ 0.000000] ACPI: FACS 00000000daf47000 00040 [ 0.000000] ACPI: SLIC 00000000daffd000 00176 (v01 SECCSD LH43STAR 00000002 PTEC 00000001) [ 0.000000] ACPI: SSDT 00000000daffb000 01068 (v01 SECCSD PtidDevc 00001000 INTL 20061109) [ 0.000000] ACPI: ASF! 00000000daff1000 000A5 (v32 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: HPET 00000000dafee000 00038 (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: APIC 00000000dafed000 00098 (v03 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: MCFG 00000000dafec000 0003C (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafeb000 00804 (v01 PmRef Cpu0Ist 00003000 INTL 20061109) [ 0.000000] ACPI: SSDT 00000000dafea000 00996 (v01 PmRef CpuPm 00003000 INTL 20061109) [ 0.000000] ACPI: UEFI 00000000dafe9000 0003E (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dafe8000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dafe7000 0026A (v01 SECCSD LH43STAR 00000002 PTL 00000002) [ 0.000000] ACPI: SSDT 00000000dafe6000 000D0 (v01 Iffs IffsAsl 00003000 INTL 20061109) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011fdfffff] [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x11fdfffff] [ 0.000000] NODE_DATA [mem 0x11fdfc000-0x11fdfffff] [ 0.000000] [ffffea0000000000-ffffea00047fffff] PMD -> [ffff88011b400000-ffff88011f3fffff] on node 0 [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00010000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x11fdfffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00010000-0x0009cfff] [ 0.000000] node 0: [mem 0x00100000-0x1fffffff] [ 0.000000] node 0: [mem 0x20200000-0x3fffffff] [ 0.000000] node 0: [mem 0x40200000-0xd9c9efff] [ 0.000000] node 0: [mem 0xdafff000-0xdaffffff] [ 0.000000] node 0: [mem 0x100000000-0x11fdfffff] [ 0.000000] On node 0 totalpages: 1021485 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 141 pages reserved [ 0.000000] DMA zone: 3981 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 13859 pages used for memmap [ 0.000000] DMA32 zone: 886944 pages, LIFO batch:31 [ 0.000000] Normal zone: 2040 pages used for memmap [ 0.000000] Normal zone: 130560 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000 [ 0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000 [ 0.000000] PM: Registered nosave memory: 00000000d9c9f000 - 00000000dae7f000 [ 0.000000] PM: Registered nosave memory: 00000000dae7f000 - 00000000daf9f000 [ 0.000000] PM: Registered nosave memory: 00000000daf9f000 - 00000000dafff000 [ 0.000000] PM: Registered nosave memory: 00000000db000000 - 00000000dfa00000 [ 0.000000] PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000 [ 0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000 [ 0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000 [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000 [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000 [ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000 [ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88011fa00000 s85312 r8192 d21184 u262144 [ 0.000000] pcpu-alloc: s85312 r8192 d21184 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1005381 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.8.0-rc4-next20130125-1-iniza-generic root=UUID=001AADA61AAD9964 loop=/ubuntu/disks/root.disk ro [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] __ex_table already sorted, skipping sort [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3933864k/4716544k available (6946k kernel code, 630604k absent, 152076k reserved, 6299k data, 984k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled. [ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:16640 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.004000] tsc: Detected 1596.375 MHz processor [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3192.75 BogoMIPS (lpj=6385500) [ 0.000009] pid_max: default: 32768 minimum: 301 [ 0.000037] Security Framework initialized [ 0.000051] AppArmor: AppArmor initialized [ 0.000053] Yama: becoming mindful. [ 0.000398] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.001439] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.001889] Mount-cache hash table entries: 256 [ 0.002075] Initializing cgroup subsys cpuacct [ 0.002080] Initializing cgroup subsys memory [ 0.002089] Initializing cgroup subsys devices [ 0.002091] Initializing cgroup subsys freezer [ 0.002095] Initializing cgroup subsys blkio [ 0.002097] Initializing cgroup subsys perf_event [ 0.002102] Initializing cgroup subsys hugetlb [ 0.002128] Disabled fast string operations [ 0.002131] CPU: Physical Processor ID: 0 [ 0.002134] CPU: Processor Core ID: 0 [ 0.002140] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.002140] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.002146] mce: CPU supports 7 MCE banks [ 0.002161] CPU0: Thermal monitoring enabled (TM1) [ 0.002169] process: using mwait in idle threads [ 0.002174] Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0 [ 0.002174] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32 [ 0.002174] tlb_flushall_shift: 5 [ 0.002308] Freeing SMP alternatives: 24k freed [ 0.004512] ACPI: Core revision 20121220 [ 0.009994] ACPI: All ACPI Tables successfully acquired [ 0.011529] ftrace: allocating 26000 entries in 102 pages [ 0.026135] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.065796] smpboot: CPU0: Intel(R) Core(TM) i5-2467M CPU @ 1.60GHz (fam: 06, model: 2a, stepping: 07) [ 0.065807] TSC deadline timer enabled [ 0.065811] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver. [ 0.065822] ... version: 3 [ 0.065824] ... bit width: 48 [ 0.065826] ... generic registers: 4 [ 0.065829] ... value mask: 0000ffffffffffff [ 0.065831] ... max period: 000000007fffffff [ 0.065834] ... fixed-purpose events: 3 [ 0.065836] ... event mask: 000000070000000f [ 0.077901] Disabled fast string operations [ 0.080111] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. [ 0.091245] Disabled fast string operations [ 0.104475] Disabled fast string operations [ 0.066968] smpboot: Booting Node 0, Processors #1 #2 #3 [ 0.106591] Brought up 4 CPUs [ 0.106599] smpboot: Total of 4 processors activated (12771.00 BogoMIPS) [ 0.110412] devtmpfs: initialized [ 0.111294] EVM: security.selinux [ 0.111297] EVM: security.SMACK64 [ 0.111299] EVM: security.capability [ 0.111342] PM: Registering ACPI NVS region [mem 0xdae7f000-0xdaf9efff] (1179648 bytes) [ 0.112109] regulator-dummy: no parameters [ 0.112160] NET: Registered protocol family 16 [ 0.112296] ACPI: bus type pci registered [ 0.112367] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) [ 0.112373] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 [ 0.119746] PCI: Using configuration type 1 for base access [ 0.120621] bio: create slab <bio-0> at 0 [ 0.120709] ACPI: Added _OSI(Module Device) [ 0.120713] ACPI: Added _OSI(Processor Device) [ 0.120715] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.120718] ACPI: Added _OSI(Processor Aggregator Device) [ 0.122220] ACPI: EC: Look up EC in DSDT [ 0.154242] ACPI: Executed 1 blocks of module-level executable AML code [ 0.156609] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.172404] ACPI: SSDT 00000000dae70718 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.172802] ACPI: Dynamic OEM Table Load: [ 0.172806] ACPI: SSDT (null) 00688 (v01 PmRef Cpu0Cst 00003001 INTL 20061109) [ 0.186471] ACPI: SSDT 00000000dae71a98 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.186904] ACPI: Dynamic OEM Table Load: [ 0.186908] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20061109) [ 0.202756] ACPI: SSDT 00000000dae6fd98 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.203141] ACPI: Dynamic OEM Table Load: [ 0.203145] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20061109) [ 0.219754] ACPI: Interpreter enabled [ 0.219762] ACPI: (supports S0 S1 S3 S5) [ 0.219781] ACPI: Using IOAPIC for interrupt routing [ 0.219816] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.234289] ACPI: Power Resource [FN00] (off) [ 0.234367] ACPI: Power Resource [FN01] (off) [ 0.234441] ACPI: Power Resource [FN02] (off) [ 0.234517] ACPI: Power Resource [FN03] (off) [ 0.234591] ACPI: Power Resource [FN04] (off) [ 0.235184] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e]) [ 0.235189] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.235405] \_SB_.PCI0:_OSC invalid UUID [ 0.235406] _OSC request data:1 8 1f [ 0.235486] \_SB_.PCI0:_OSC invalid UUID [ 0.235487] _OSC request data:1 1f 1f [ 0.235491] pci_root PNP0A08:00: ACPI _OSC support notification failed, disabling PCIe ASPM [ 0.235496] pci_root PNP0A08:00: Unable to request _OSC control (_OSC support mask: 0x08) [ 0.235921] PCI host bridge to bus 0000:00 [ 0.235926] pci_bus 0000:00: root bus resource [bus 00-3e] [ 0.235930] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.235933] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.235937] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.235940] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff] [ 0.235944] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff] [ 0.235955] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.235998] pci 0000:00:02.0: [8086:0116] type 00 class 0x030000 [ 0.236010] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit] [ 0.236017] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref] [ 0.236023] pci 0000:00:02.0: reg 20: [io 0x3000-0x303f] [ 0.236084] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.236110] pci 0000:00:16.0: reg 10: [mem 0xf0705000-0xf070500f 64bit] [ 0.236193] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.236234] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.236258] pci 0000:00:1a.0: reg 10: [mem 0xf070a000-0xf070a3ff] [ 0.236356] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.236386] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.236403] pci 0000:00:1b.0: reg 10: [mem 0xf0700000-0xf0703fff 64bit] [ 0.236480] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.236506] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.236594] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.236624] pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400 [ 0.236710] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.236742] pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400 [ 0.236872] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.236920] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.236944] pci 0000:00:1d.0: reg 10: [mem 0xf0709000-0xf07093ff] [ 0.237042] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.237071] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.237206] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.237227] pci 0000:00:1f.2: reg 10: [io 0x3088-0x308f] [ 0.237236] pci 0000:00:1f.2: reg 14: [io 0x3094-0x3097] [ 0.237245] pci 0000:00:1f.2: reg 18: [io 0x3080-0x3087] [ 0.237254] pci 0000:00:1f.2: reg 1c: [io 0x3090-0x3093] [ 0.237263] pci 0000:00:1f.2: reg 20: [io 0x3060-0x307f] [ 0.237272] pci 0000:00:1f.2: reg 24: [mem 0xf0708000-0xf07087ff] [ 0.237323] pci 0000:00:1f.2: PME# supported from D3hot [ 0.237345] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.237362] pci 0000:00:1f.3: reg 10: [mem 0xf0704000-0xf07040ff 64bit] [ 0.237385] pci 0000:00:1f.3: reg 20: [io 0xefa0-0xefbf] [ 0.237628] pci 0000:01:00.0: [8086:0091] type 00 class 0x028000 [ 0.237808] pci 0000:01:00.0: reg 10: [mem 0xf0600000-0xf0601fff 64bit] [ 0.238573] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold [ 0.246777] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.246787] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.246921] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000 [ 0.246991] pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] [ 0.247113] pci 0000:02:00.0: reg 18: [mem 0xf0404000-0xf0404fff 64bit pref] [ 0.247189] pci 0000:02:00.0: reg 20: [mem 0xf0400000-0xf0403fff 64bit pref] [ 0.247520] pci 0000:02:00.0: supports D1 D2 [ 0.247522] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.254695] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.254709] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.254733] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.254862] pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330 [ 0.254900] pci 0000:03:00.0: reg 10: [mem 0xf0500000-0xf0507fff 64bit] [ 0.255098] pci 0000:03:00.0: PME# supported from D3hot D3cold [ 0.262687] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.262705] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.262744] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.262951] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.262988] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.263017] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.263057] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 0.263082] pci 0000:00:1c.3: System wakeup disabled by ACPI [ 0.263123] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT] [ 0.263302] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.263341] pci 0000:02:00.0: System wakeup disabled by ACPI [ 0.264582] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.264627] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.264765] ACPI: No dock devices found. [ 0.264811] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.264861] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.264912] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.264958] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.265004] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.265051] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.265099] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.265144] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *9 [ 0.265249] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.265256] vgaarb: loaded [ 0.265258] vgaarb: bridge control possible 0000:00:02.0 [ 0.265413] SCSI subsystem initialized [ 0.265417] ACPI: bus type scsi registered [ 0.265461] libata version 3.00 loaded. [ 0.265476] ACPI: bus type usb registered [ 0.265495] usbcore: registered new interface driver usbfs [ 0.265505] usbcore: registered new interface driver hub [ 0.265527] usbcore: registered new device driver usb [ 0.265608] PCI: Using ACPI for IRQ routing [ 0.267282] PCI: pci_cache_line_size set to 64 bytes [ 0.267388] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.267390] e820: reserve RAM buffer [mem 0xd9c9f000-0xdbffffff] [ 0.267392] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff] [ 0.267393] e820: reserve RAM buffer [mem 0x11fe00000-0x11fffffff] [ 0.267476] NetLabel: Initializing [ 0.267479] NetLabel: domain hash size = 128 [ 0.267481] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.267493] NetLabel: unlabeled traffic allowed by default [ 0.267549] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.267558] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.269569] Switching to clocksource hpet [ 0.274549] AppArmor: AppArmor Filesystem Enabled [ 0.274578] pnp: PnP ACPI init [ 0.274592] ACPI: bus type pnp registered [ 0.274818] pnp 00:00: [dma 4] [ 0.274914] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.274934] pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active) [ 0.275023] pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.275053] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.275097] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.275102] system 00:04: [io 0x1000-0x100f] has been reserved [ 0.275106] system 00:04: [io 0x5000-0x5003] has been reserved [ 0.275109] system 00:04: [io 0xffff] has been reserved [ 0.275113] system 00:04: [io 0x0400-0x0453] has been reserved [ 0.275116] system 00:04: [io 0x0458-0x047f] has been reserved [ 0.275120] system 00:04: [io 0x0500-0x057f] has been reserved [ 0.275123] system 00:04: [io 0x0a00-0x0a0f] has been reserved [ 0.275127] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.275130] system 00:04: [io 0x5000-0x500f] could not be reserved [ 0.275135] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.275160] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.275209] system 00:06: [io 0x0454-0x0457] has been reserved [ 0.275215] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.275246] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.275289] pnp 00:08: Plug and Play ACPI device, IDs ETD0b00 SYN0002 PNP0f13 (active) [ 0.275444] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.275449] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.275453] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.275457] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.275461] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved [ 0.275464] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.275468] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.275471] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.275475] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.275479] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.275484] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.275843] pnp 00:0a: can't evaluate _CRS: 12311 [ 0.275944] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.275970] pnp: PnP ACPI: found 11 devices [ 0.275973] ACPI: ACPI bus type pnp unregistered [ 0.282350] pci 0000:00:1c.0: PCI bridge to [bus 01] [ 0.282361] pci 0000:00:1c.0: bridge window [mem 0xf0600000-0xf06fffff] [ 0.282373] pci 0000:00:1c.3: PCI bridge to [bus 02] [ 0.282378] pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff] [ 0.282389] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.282398] pci 0000:00:1c.4: PCI bridge to [bus 03] [ 0.282406] pci 0000:00:1c.4: bridge window [mem 0xf0500000-0xf05fffff] [ 0.282445] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.282447] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.282449] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.282451] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.282453] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff] [ 0.282455] pci_bus 0000:01: resource 1 [mem 0xf0600000-0xf06fffff] [ 0.282457] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.282459] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref] [ 0.282461] pci_bus 0000:03: resource 1 [mem 0xf0500000-0xf05fffff] [ 0.282493] NET: Registered protocol family 2 [ 0.282632] TCP established hash table entries: 32768 (order: 7, 524288 bytes) [ 0.282778] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.282880] TCP: Hash tables configured (established 32768 bind 32768) [ 0.282913] TCP: reno registered [ 0.282922] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.282944] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.283011] NET: Registered protocol family 1 [ 0.283024] pci 0000:00:02.0: Boot video device [ 0.283194] PCI: CLS 64 bytes, default 64 [ 0.283230] Trying to unpack rootfs image as initramfs... [ 0.346835] Freeing initrd memory: 3104k freed [ 0.347505] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.347515] software IO TLB [mem 0xd5c9d000-0xd9c9d000] (64MB) mapped at [ffff8800d5c9d000-ffff8800d9c9cfff] [ 0.347911] Initialise system trusted keyring [ 0.347963] audit: initializing netlink socket (disabled) [ 0.347981] type=2000 audit(1359124842.344:1): initialized [ 0.380747] bounce pool size: 64 pages [ 0.380759] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.382110] VFS: Disk quotas dquot_6.5.2 [ 0.382156] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.382630] fuse init (API version 7.20) [ 0.382703] msgmni has been set to 7689 [ 0.383142] Key type asymmetric registered [ 0.383148] Asymmetric key parser 'x509' registered [ 0.383183] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.383217] io scheduler noop registered [ 0.383222] io scheduler deadline registered (default) [ 0.383231] io scheduler cfq registered [ 0.383433] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.383451] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.383491] intel_idle: MWAIT substates: 0x21120 [ 0.383493] intel_idle: v0.4 model 0x2A [ 0.383494] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.383959] ACPI: AC Adapter [ADP1] (on-line) [ 0.384026] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 [ 0.384044] ACPI: Lid Switch [LID0] [ 0.384076] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1 [ 0.384083] ACPI: Power Button [PWRB] [ 0.384114] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.384119] ACPI: Power Button [PWRF] [ 0.384168] ACPI: Fan [FAN0] (off) [ 0.384195] ACPI: Fan [FAN1] (off) [ 0.384221] ACPI: Fan [FAN2] (off) [ 0.384245] ACPI: Fan [FAN3] (off) [ 0.384268] ACPI: Fan [FAN4] (off) [ 0.384316] ACPI: Requesting acpi_cpufreq [ 0.390301] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.390306] ACPI: Thermal Zone [TZ00] (66 C) [ 0.390496] thermal LNXTHERM:01: registered as thermal_zone1 [ 0.390500] ACPI: Thermal Zone [TZ01] (30 C) [ 0.390525] GHES: HEST is not enabled! [ 0.390672] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 0.393205] Linux agpgart interface v0.103 [ 0.394432] brd: module loaded [ 0.395046] loop: module loaded [ 0.395138] ahci 0000:00:1f.2: version 3.0 [ 0.395205] ahci 0000:00:1f.2: irq 40 for MSI/MSI-X [ 0.395245] ahci: SSS flag set, parallel bus scan disabled [ 0.395294] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1b impl SATA mode [ 0.395300] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.395308] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.395584] ACPI: Battery Slot [BAT1] (battery present) [ 0.417881] scsi0 : ahci [ 0.417956] scsi1 : ahci [ 0.418018] scsi2 : ahci [ 0.418075] scsi3 : ahci [ 0.418131] scsi4 : ahci [ 0.418191] scsi5 : ahci [ 0.418226] ata1: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708100 irq 40 [ 0.418232] ata2: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708180 irq 40 [ 0.418235] ata3: DUMMY [ 0.418239] ata4: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708280 irq 40 [ 0.418244] ata5: SATA max UDMA/133 abar m2048@0xf0708000 port 0xf0708300 irq 40 [ 0.418248] ata6: DUMMY [ 0.418490] libphy: Fixed MDIO Bus: probed [ 0.418544] tun: Universal TUN/TAP device driver, 1.6 [ 0.418547] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 0.418593] PPP generic driver version 2.4.2 [ 0.418632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.418635] ehci-pci: EHCI PCI platform driver [ 0.418664] ehci-pci 0000:00:1a.0: setting latency timer to 64 [ 0.418668] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 0.418675] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 0.418693] ehci-pci 0000:00:1a.0: debug port 2 [ 0.422590] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 0.422605] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf070a000 [ 0.433495] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 0.433539] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.433549] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.433559] usb usb1: Product: EHCI Host Controller [ 0.433572] usb usb1: Manufacturer: Linux 3.8.0-rc4-next20130125-1-iniza-generic ehci_hcd [ 0.433576] usb usb1: SerialNumber: 0000:00:1a.0 [ 0.433670] hub 1-0:1.0: USB hub found [ 0.433676] hub 1-0:1.0: 2 ports detected [ 0.433756] ehci-pci 0000:00:1d.0: setting latency timer to 64 [ 0.433760] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 0.433767] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 0.433782] ehci-pci 0000:00:1d.0: debug port 2 [ 0.437685] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 0.437700] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0709000 [ 0.449484] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 0.449518] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.449527] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.449538] usb usb2: Product: EHCI Host Controller [ 0.449545] usb usb2: Manufacturer: Linux 3.8.0-rc4-next20130125-1-iniza-generic ehci_hcd [ 0.449562] usb usb2: SerialNumber: 0000:00:1d.0 [ 0.449640] hub 2-0:1.0: USB hub found [ 0.449645] hub 2-0:1.0: 2 ports detected [ 0.449702] ehci-platform: EHCI generic platform driver [ 0.449712] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 0.449725] uhci_hcd: USB Universal Host Controller Interface driver [ 0.449767] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.449773] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3 [ 0.459458] xhci_hcd 0000:03:00.0: irq 16, io mem 0xf0500000 [ 0.459526] xhci_hcd 0000:03:00.0: irq 41 for MSI/MSI-X [ 0.459533] xhci_hcd 0000:03:00.0: irq 42 for MSI/MSI-X [ 0.459538] xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X [ 0.459544] xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X [ 0.459552] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X [ 0.459659] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.459663] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.459667] usb usb3: Product: xHCI Host Controller [ 0.459670] usb usb3: Manufacturer: Linux 3.8.0-rc4-next20130125-1-iniza-generic xhci_hcd [ 0.459674] usb usb3: SerialNumber: 0000:03:00.0 [ 0.459733] xHCI xhci_add_endpoint called for root hub [ 0.459735] xHCI xhci_check_bandwidth called for root hub [ 0.459759] hub 3-0:1.0: USB hub found [ 0.459769] hub 3-0:1.0: 2 ports detected [ 0.459822] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 0.459827] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4 [ 0.459865] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003 [ 0.459868] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.459872] usb usb4: Product: xHCI Host Controller [ 0.459875] usb usb4: Manufacturer: Linux 3.8.0-rc4-next20130125-1-iniza-generic xhci_hcd [ 0.459879] usb usb4: SerialNumber: 0000:03:00.0 [ 0.459935] xHCI xhci_add_endpoint called for root hub [ 0.459936] xHCI xhci_check_bandwidth called for root hub [ 0.459952] hub 4-0:1.0: USB hub found [ 0.459961] hub 4-0:1.0: 2 ports detected [ 0.549502] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:EPAD] at 0x60,0x64 irq 1,12 [ 0.556838] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.556846] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.556957] mousedev: PS/2 mouse device common for all mice [ 0.557406] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 0.557455] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 0.557547] device-mapper: uevent: version 1.0.3 [ 0.557611] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@xxxxxxxxxx [ 0.557683] cpuidle: using governor ladder [ 0.557774] cpuidle: using governor menu [ 0.557780] ledtrig-cpu: registered to indicate activity on CPUs [ 0.557783] EFI Variables Facility v0.08 2004-May-17 [ 0.557908] ashmem: initialized [ 0.558018] TCP: cubic registered [ 0.558113] NET: Registered protocol family 10 [ 0.558302] NET: Registered protocol family 17 [ 0.558313] Key type dns_resolver registered [ 0.558568] PM: Hibernation image not present or could not be loaded. [ 0.558570] Loading compiled-in X.509 certificates [ 0.559520] Loaded X.509 cert 'Magrathea: Glacier signing key: c19eadbbd1f9dde1b451a5d856456341dc96ae09' [ 0.559533] registered taskstats version 1 [ 0.562570] Key type trusted registered [ 0.564731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.564858] Key type encrypted registered [ 0.567396] rtc_cmos 00:05: setting system clock to 2013-01-25 14:40:42 UTC (1359124842) [ 0.567753] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 0.567758] EDD information not available. [ 0.737379] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 0.738663] ata1.00: ATA-8: Hitachi HTS545050A7E380, GG2OA6C0, max UDMA/133 [ 0.738682] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.739932] ata1.00: configured for UDMA/133 [ 0.740210] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 GG2O PQ: 0 ANSI: 5 [ 0.740404] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 0.740407] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 0.740411] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 0.740526] sd 0:0:0:0: [sda] Write Protect is off [ 0.740534] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 0.740651] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 0.745318] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 0.754713] sda: sda1 sda2 sda3 [ 0.755528] sd 0:0:0:0: [sda] Attached SCSI disk [ 0.877613] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 0.877634] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 0.878090] hub 1-1:1.0: USB hub found [ 0.878264] hub 1-1:1.0: 6 ports detected [ 0.989195] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 1.057156] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.057733] ata2.00: ATA-8: SanDisk iSSD P4 16GB, SSD 9.14, max UDMA/133 [ 1.057740] ata2.00: 31277232 sectors, multi 1: LBA48 [ 1.058426] ata2.00: configured for UDMA/133 [ 1.058680] scsi 1:0:0:0: Direct-Access ATA SanDisk iSSD P4 SSD PQ: 0 ANSI: 5 [ 1.058847] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 1.058864] sd 1:0:0:0: [sdb] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 1.059080] sd 1:0:0:0: [sdb] Write Protect is off [ 1.059095] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.059211] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.060270] sdb: sdb1 sdb2 [ 1.060699] sd 1:0:0:0: [sdb] Attached SCSI disk [ 1.121445] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 1.121454] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.121929] hub 2-1:1.0: USB hub found [ 1.122090] hub 2-1:1.0: 6 ports detected [ 1.193117] usb 1-1.2: new low-speed USB device number 3 using ehci-pci [ 1.291370] usb 1-1.2: New USB device found, idVendor=046d, idProduct=c00e [ 1.291394] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.291408] usb 1-1.2: Product: USB-PS/2 Optical Mouse [ 1.291427] usb 1-1.2: Manufacturer: Logitech [ 1.344935] tsc: Refined TSC clocksource calibration: 1596.374 MHz [ 1.344959] Switching to clocksource tsc [ 1.361028] usb 1-1.4: new high-speed USB device number 4 using ehci-pci [ 1.376913] ata4: SATA link down (SStatus 0 SControl 300) [ 1.613034] usb 1-1.4: New USB device found, idVendor=2232, idProduct=1018 [ 1.613056] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 1.613070] usb 1-1.4: Product: WebCam SC-13HDL11431N [ 1.613081] usb 1-1.4: Manufacturer: 123 [ 1.696685] ata5: SATA link down (SStatus 0 SControl 300) [ 1.698390] Freeing unused kernel memory: 984k freed [ 1.698546] Write protecting the kernel read-only data: 12288k [ 1.702110] Freeing unused kernel memory: 1236k freed [ 1.705440] Freeing unused kernel memory: 1128k freed [ 1.722844] udevd[120]: starting version 175 [ 1.784968] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.785243] r8169 0000:02:00.0: irq 46 for MSI/MSI-X [ 1.785473] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000664000, e8:03:9a:36:17:a9, XID 0c900800 IRQ 46 [ 1.785484] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 1.800666] usbcore: registered new interface driver usbhid [ 1.800675] usbhid: USB HID core driver [ 1.814011] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input4 [ 1.814209] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-1.2/input0 [ 1.856825] usb 2-1.5: new full-speed USB device number 3 using ehci-pci [ 1.952454] usb 2-1.5: New USB device found, idVendor=8086, idProduct=0189 [ 1.952473] usb 2-1.5: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.661130] EXT4-fs (loop0): mounted filesystem with ordered data mode. Opts: (null) [ 12.397938] Adding 262140k swap on /host/ubuntu/disks/swap.disk. Priority:-1 extents:1 across:262140k [ 12.405083] EXT4-fs (loop0): re-mounted. Opts: errors=remount-ro [ 12.481095] udevd[570]: starting version 175 [ 12.638530] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20121220/utaddress-251) [ 12.638540] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.638545] ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20121220/utaddress-251) [ 12.638550] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.638552] ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20121220/utaddress-251) [ 12.638557] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.638559] ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20121220/utaddress-251) [ 12.638563] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.638565] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 12.658872] mei 0000:00:16.0: setting latency timer to 64 [ 12.658958] mei 0000:00:16.0: irq 47 for MSI/MSI-X [ 12.659379] wmi: Mapper loaded [ 12.708592] Bluetooth: Core ver 2.16 [ 12.708615] NET: Registered protocol family 31 [ 12.708618] Bluetooth: HCI device and connection manager initialized [ 12.708625] Bluetooth: HCI socket layer initialized [ 12.708629] Bluetooth: L2CAP socket layer initialized [ 12.708636] Bluetooth: SCO socket layer initialized [ 12.744777] lp: driver loaded but no devices found [ 12.795375] samsung_laptop: detected SABI interface: SwSmi@ [ 12.795380] samsung_laptop: Backlight controlled by ACPI video driver [ 12.829251] ppdev: user-space parallel port driver [ 12.945054] cfg80211: Calling CRDA to update world regulatory domain [ 12.950699] cfg80211: World regulatory domain updated: [ 12.950705] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.950708] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.950711] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.950714] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.950716] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.950718] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.055374] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 13.055379] Bluetooth: BNEP filters: protocol multicast [ 13.055388] Bluetooth: BNEP socket layer initialized [ 13.117645] Bluetooth: RFCOMM TTY layer initialized [ 13.117670] Bluetooth: RFCOMM socket layer initialized [ 13.117672] Bluetooth: RFCOMM ver 1.11 [ 13.118034] usbcore: registered new interface driver btusb [ 13.137166] Linux video capture interface: v2.00 [ 13.167548] type=1400 audit(1359121255.104:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=735 comm="apparmor_parser" [ 13.167617] type=1400 audit(1359121255.104:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=735 comm="apparmor_parser" [ 13.167665] type=1400 audit(1359121255.104:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=735 comm="apparmor_parser" [ 13.180926] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28 [ 13.187188] type=1400 audit(1359121255.124:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=797 comm="apparmor_parser" [ 13.187244] type=1400 audit(1359121255.124:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=797 comm="apparmor_parser" [ 13.187288] type=1400 audit(1359121255.124:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=797 comm="apparmor_parser" [ 13.308232] [drm] Initialized drm 1.1.0 20060810 [ 13.536973] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28 [ 13.539354] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x28 [ 13.541529] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x28 [ 13.544483] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 13.555568] init: failsafe main process (915) killed by TERM signal [ 13.675460] Intel(R) Wireless WiFi driver for Linux, in-tree: [ 13.675466] Copyright(c) 2003-2012 Intel Corporation [ 13.675765] iwlwifi 0000:01:00.0: irq 48 for MSI/MSI-X [ 13.676179] iwlwifi 0000:01:00.0: loaded firmware version 18.168.6.1 [ 13.794234] uvcvideo: Found UVC 1.00 device WebCam SC-13HDL11431N (2232:1018) [ 13.813474] input: WebCam SC-13HDL11431N as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input5 [ 13.813632] usbcore: registered new interface driver uvcvideo [ 13.813635] USB Video Class driver (1.1.1) [ 13.889510] type=1400 audit(1359121255.828:8): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=885 comm="apparmor_parser" [ 13.892444] type=1400 audit(1359121255.832:9): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=885 comm="apparmor_parser" [ 14.072698] type=1400 audit(1359121256.012:10): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm/lightdm-guest-session-wrapper" pid=1032 comm="apparmor_parser" [ 14.266692] [drm] Memory usable by graphics device = 2048M [ 14.266703] i915 0000:00:02.0: setting latency timer to 64 [ 14.280808] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x450f00) [ 14.295897] psmouse serio1: elantech: Synaptics capabilities query result 0x08, 0x17, 0x0c. [ 14.318704] i915 0000:00:02.0: irq 49 for MSI/MSI-X [ 14.318717] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 14.318719] [drm] Driver supports precise vblank timestamp query. [ 14.318783] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem [ 14.357803] fbcon: inteldrmfb (fb0) is primary device [ 14.378416] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input6 [ 14.487864] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUG disabled [ 14.487866] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [ 14.487867] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 14.487868] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 14.487870] iwlwifi 0000:01:00.0: CONFIG_IWLWIFI_P2P disabled [ 14.487872] iwlwifi 0000:01:00.0: Detected Intel(R) Centrino(R) Advanced-N 6230 AGN, REV=0xB0 [ 14.487925] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 14.604938] type=1400 audit(1359121256.544:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient" pid=1033 comm="apparmor_parser" [ 14.610150] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 14.624909] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 14.632067] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 15.008084] iwlwifi 0000:01:00.0: L1 Enabled; Disabling L0S [ 15.014704] iwlwifi 0000:01:00.0: Radio type=0x1-0x2-0x0 [ 15.210280] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 15.366991] Console: switching to colour frame buffer device 170x48 [ 15.369583] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 15.369585] i915 0000:00:02.0: registered panic notifier [ 15.513345] acpi device:32: registered as cooling_device9 [ 15.513504] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 15.513549] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7 [ 15.513646] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 15.513927] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X [ 15.567392] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 15.567547] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 15.567685] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 15.810783] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off [ 20.881955] audit_printk_skb: 21 callbacks suppressed [ 20.881959] type=1400 audit(1359121262.824:19): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1034 comm="apparmor_parser" [ 20.882514] type=1400 audit(1359121262.824:20): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//launchpad_integration" pid=1034 comm="apparmor_parser" [ 20.882681] type=1400 audit(1359121262.824:21): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince//sanitized_helper" pid=1034 comm="apparmor_parser" [ 20.883255] type=1400 audit(1359121262.828:22): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1034 comm="apparmor_parser" [ 20.883619] type=1400 audit(1359121262.828:23): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//launchpad_integration" pid=1034 comm="apparmor_parser" [ 20.883779] type=1400 audit(1359121262.828:24): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer//sanitized_helper" pid=1034 comm="apparmor_parser" [ 20.884107] type=1400 audit(1359121262.828:25): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1034 comm="apparmor_parser" [ 20.884335] type=1400 audit(1359121262.828:26): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer//sanitized_helper" pid=1034 comm="apparmor_parser" [ 20.956645] init: alsa-restore main process (1163) terminated with status 99 [ 21.662405] wlan0: authenticate with 00:04:0e:e4:00:3d [ 21.672813] wlan0: send auth to 00:04:0e:e4:00:3d (try 1/3) [ 21.674595] wlan0: authenticated [ 21.674752] iwlwifi 0000:01:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 21.674757] iwlwifi 0000:01:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 21.674762] wlan0: waiting for beacon from 00:04:0e:e4:00:3d [ 21.758399] wlan0: associate with 00:04:0e:e4:00:3d (try 1/3) [ 21.762192] wlan0: RX AssocResp from 00:04:0e:e4:00:3d (capab=0x411 status=0 aid=1) [ 21.766987] wlan0: associated [ 21.767033] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 51.859123] usb 2-1.5: USB disconnect, device number 3
Attachment:
config-3.8.0-rc4-next20130125-1-iniza-generic
Description: Binary data
Attachment:
3.8.0-rc4-next20130125-3-iniza-generic.patch
Description: Binary data
Attachment:
3.8.0-rc4-next20130125-4-iniza-generic.patch
Description: Binary data
