Below fixes are done to support falling threshold interrupt,
* Falling interrupt status macro corrected according to exynos5 data sheet.
* The get trend function modified to calculate trip temperature correctly.
* The clearing of interrupt status in the isr is now done after handling
the the event that caused the interrupt.
Signed-off-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
Signed-off-by: Amit Daniel Kachhap <amit.kachhap@xxxxxxxxxx>
---
drivers/thermal/exynos_thermal.c | 18 +++++++++++-------
1 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
index f6667e8..bbaff56 100644
--- a/drivers/thermal/exynos_thermal.c
+++ b/drivers/thermal/exynos_thermal.c
@@ -82,7 +82,7 @@
#define EXYNOS_TRIMINFO_RELOAD 0x1
#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
-#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 16)
+#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
#define EXYNOS_MUX_ADDR_VALUE 6
#define EXYNOS_MUX_ADDR_SHIFT 20
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
@@ -365,12 +365,19 @@ static int exynos_get_temp(struct thermal_zone_device *thermal,
static int exynos_get_trend(struct thermal_zone_device *thermal,
int trip, enum thermal_trend *trend)
{
- if (thermal->temperature >= trip)
+ int ret = 0;
+ unsigned long trip_temp;
+
+ ret = exynos_get_trip_temp(thermal, trip, &trip_temp);
+ if (ret < 0)
+ return ret;
+
+ if (thermal->temperature >= trip_temp)
*trend = THERMAL_TREND_RAISING;
else
*trend = THERMAL_TREND_DROPPING;
- return 0;
+ return ret;
}
/* Operation callback functions for thermal zone */
static struct thermal_zone_device_ops const exynos_dev_ops = {
@@ -704,10 +711,9 @@ static void exynos_tmu_work(struct work_struct *work)
struct exynos_tmu_data *data = container_of(work,
struct exynos_tmu_data, irq_work);
+ exynos_report_trigger();
mutex_lock(&data->lock);
clk_enable(data->clk);
-
-
if (data->soc == SOC_ARCH_EXYNOS)
writel(EXYNOS_TMU_CLEAR_RISE_INT |
EXYNOS_TMU_CLEAR_FALL_INT,
@@ -715,10 +721,8 @@ static void exynos_tmu_work(struct work_struct *work)
else
writel(EXYNOS4210_TMU_INTCLEAR_VAL,
data->base + EXYNOS_TMU_REG_INTCLEAR);
-
clk_disable(data->clk);
mutex_unlock(&data->lock);
- exynos_report_trigger();
enable_irq(data->irq);
}
--
1.7.1
