Hello again,
On Fri, May 25, 2012 at 11:25:50AM +0300, Eduardo Valentin wrote:
> Hello Paul and Tony,
FYI, Forgot to mention that these patches are available here:
git://gitorious.org/omap-thermal/omap-thermal.git omap_scm_dev
>
> This is a series of patches adding a basic support for system control module,
> on OMAP4+ context. It is a working in progress, but I wanted to share already
> to get your feedback.
>
> I've modeled the driver as an MFD. You will see in this series:
> . A rework of the system control module header (patch from Santosh, picked from the list)
> . Device creation for control module core
> . Early device creation for control module core
> . The MFD core driver for system control module
> . The MFD child for usb-phy pin control
> . The MFD child for bandgap sensor
> . Very early exposure of OMAP4 thermal zone
> . All added drivers are only supporting DT probing
> . The series is based on linux-omap master, as it has the hwmod entries for SCM.
>
> The overall idea of this series is to put in place the infrastructure. It is
> not touching nor removing the existing APIs under mach-omap2/control.c for now.
> But the target is to have these APIs moved to the MFD core driver.
>
> For early access, like ID checking, I have written the platform driver
> as an early platform driver and you will see also early device addition
> and probing under device.c for this case. This is of course a proposal.
> I see that there are people that thing this is a bit of an overkill.
> Konstantin (CCd) was proposing a simpler solution by having
> APIs with early_* prefixes, and solve the IO address mapping with
> a DT entry, for instance. But feel free to propose better ways.
>
> This code has been ripped off from the Android 3.1 branch. I have rewritten
> a couple of things, but the major driver functions and API's entries are kept.
>
> So, based on this series, I see as a TODO list, for system control core driver:
> - Start to move all the existing APIs under mach-omap2/control.c to the mfd core.
> - Rewrite the users of the existing APIs, mentioned on previous item
> Once we decide the API and agree on how to deal with early calls.
> - Add remaining children (from top of my head, the CAM is one of them,
> but I also think we should prob have one for HWOBS for instance)
> - Test on boards that use the existing APIs.
>
> TODO list for bandgap driver:
> - Improve thermal zone definition for OMAP4
> - Introduce the thermal zones for OMAP5
>
> Amit, due to hwmod dep, I didn't include any cooling binding in this series,
> based on the generic CPU cooling device.
>
> Overall series has been tested only with panda board OMAP4460.
>
> Your comments are welcome.
>
> All best,
>
> Eduardo Valentin (9):
> ARM: OMAP: expose control.h to mach area
> OMAP: Add early device for system control module
> mfd: omap: control: core system control driver
> OMAP2+: use control module mfd driver in omap_type
> mfd: omap: control: usb-phy: introduce the ctrl-module usb driver
> ARM: OMAP4+: Adding the temperature sensor register set bit fields
> ARM: OMAP4+: thermal: introduce bandgap temperature sensor
> omap4: thermal: add basic CPU thermal zone
> ARM: DT: Add support to system control module for OMAP4
>
> Kishon Vijay Abraham I (1):
> arm: omap: device: create a device for system control module
>
> Santosh Shilimkar (1):
> ARM: OMAP4: Remove un-used control module headers and defines.
>
> .../devicetree/bindings/mfd/omap_control.txt | 44 +
> .../devicetree/bindings/thermal/omap_bandgap.txt | 27 +
> arch/arm/boot/dts/omap4.dtsi | 13 +
> arch/arm/mach-omap2/Kconfig | 1 +
> arch/arm/mach-omap2/am35xx-emac.c | 2 +-
> arch/arm/mach-omap2/board-3430sdp.c | 2 +-
> arch/arm/mach-omap2/board-4430sdp.c | 2 +-
> arch/arm/mach-omap2/board-am3517crane.c | 2 +-
> arch/arm/mach-omap2/board-am3517evm.c | 2 +-
> arch/arm/mach-omap2/board-apollon.c | 2 +-
> arch/arm/mach-omap2/board-cm-t3517.c | 2 +-
> arch/arm/mach-omap2/board-h4.c | 2 +-
> arch/arm/mach-omap2/board-igep0020.c | 2 +-
> arch/arm/mach-omap2/board-ldp.c | 2 +-
> arch/arm/mach-omap2/board-omap3logic.c | 2 +-
> arch/arm/mach-omap2/board-omap4panda.c | 2 +-
> arch/arm/mach-omap2/board-omap4pcm049.c | 2 +-
> arch/arm/mach-omap2/clock2420_data.c | 2 +-
> arch/arm/mach-omap2/clock2430_data.c | 2 +-
> arch/arm/mach-omap2/clock3xxx_data.c | 2 +-
> arch/arm/mach-omap2/clock44xx_data.c | 2 +-
> arch/arm/mach-omap2/common.c | 2 +-
> arch/arm/mach-omap2/control.c | 2 +-
> arch/arm/mach-omap2/cpuidle34xx.c | 2 +-
> arch/arm/mach-omap2/devices.c | 57 +-
> arch/arm/mach-omap2/display.c | 2 +-
> arch/arm/mach-omap2/hsmmc.c | 2 +-
> arch/arm/mach-omap2/id.c | 18 +-
> arch/arm/mach-omap2/{ => include/mach}/control.h | 163 ++-
> .../include/mach/ctrl_module_core_44xx.h | 391 -----
> .../include/mach/ctrl_module_pad_core_44xx.h | 1409 -----------------
> .../include/mach/ctrl_module_pad_wkup_44xx.h | 236 ---
> .../include/mach/ctrl_module_wkup_44xx.h | 92 --
> arch/arm/mach-omap2/mcbsp.c | 2 +-
> arch/arm/mach-omap2/mux.c | 2 +-
> arch/arm/mach-omap2/omap_phy_internal.c | 2 +-
> arch/arm/mach-omap2/opp3xxx_data.c | 2 +-
> arch/arm/mach-omap2/opp4xxx_data.c | 2 +-
> arch/arm/mach-omap2/pm24xx.c | 2 +-
> arch/arm/mach-omap2/pm34xx.c | 2 +-
> arch/arm/mach-omap2/prcm.c | 2 +-
> arch/arm/mach-omap2/serial.c | 2 +-
> arch/arm/mach-omap2/sleep34xx.S | 2 +-
> arch/arm/mach-omap2/sr_device.c | 2 +-
> arch/arm/mach-omap2/usb-fs.c | 2 +-
> arch/arm/mach-omap2/voltage.c | 2 +-
> arch/arm/plat-omap/Kconfig | 3 +
> drivers/mfd/Kconfig | 9 +
> drivers/mfd/Makefile | 1 +
> drivers/mfd/omap-control-core.c | 211 +++
> drivers/thermal/Kconfig | 25 +
> drivers/thermal/Makefile | 5 +-
> drivers/thermal/omap-bandgap.c | 1602 ++++++++++++++++++++
> drivers/thermal/omap-bandgap.h | 75 +
> drivers/thermal/omap4-thermal.c | 72 +
> drivers/usb/otg/Kconfig | 13 +
> drivers/usb/otg/Makefile | 1 +
> drivers/usb/otg/omap4-usb-phy.c | 130 ++
> include/linux/mfd/omap_control.h | 69 +
> include/linux/usb/omap4_usb_phy.h | 53 +
> 60 files changed, 2617 insertions(+), 2173 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
> create mode 100644 Documentation/devicetree/bindings/thermal/omap_bandgap.txt
> rename arch/arm/mach-omap2/{ => include/mach}/control.h (75%)
> delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
> delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
> delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
> delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
> create mode 100644 drivers/mfd/omap-control-core.c
> create mode 100644 drivers/thermal/omap-bandgap.c
> create mode 100644 drivers/thermal/omap-bandgap.h
> create mode 100644 drivers/thermal/omap4-thermal.c
> create mode 100644 drivers/usb/otg/omap4-usb-phy.c
> create mode 100644 include/linux/mfd/omap_control.h
> create mode 100644 include/linux/usb/omap4_usb_phy.h
>
> --
> 1.7.7.1.488.ge8e1c
>
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
