From: J Keerthy <j-keerthy@xxxxxx>
Move the omap_volt_data structure from mach-omap2/ directory
to arch/arm/plat-omap/include/plat/ so that it is accessible
from both mach-omap2 and drivers directories.
Signed-off-by: J Keerthy <j-keerthy@xxxxxx>
---
arch/arm/mach-omap2/voltage.h | 21 ++-------------------
arch/arm/plat-omap/include/plat/voltage.h | 21 ++++++++++++++++++++-
2 files changed, 22 insertions(+), 20 deletions(-)
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index 16a1b09..34ef504 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -16,6 +16,8 @@
#include <linux/err.h>
+#include <plat/voltage.h>
+
#include "vc.h"
#include "vp.h"
@@ -91,25 +93,6 @@ struct voltagedomain {
};
/**
- * struct omap_volt_data - Omap voltage specific data.
- * @voltage_nominal: The possible voltage value in uV
- * @sr_efuse_offs: The offset of the efuse register(from system
- * control module base address) from where to read
- * the n-target value for the smartreflex module.
- * @sr_errminlimit: Error min limit value for smartreflex. This value
- * differs at differnet opp and thus is linked
- * with voltage.
- * @vp_errorgain: Error gain value for the voltage processor. This
- * field also differs according to the voltage/opp.
- */
-struct omap_volt_data {
- u32 volt_nominal;
- u32 sr_efuse_offs;
- u8 sr_errminlimit;
- u8 vp_errgain;
-};
-
-/**
* struct omap_voltdm_pmic - PMIC specific data required by voltage driver.
* @slew_rate: PMIC slew rate (in uv/us)
* @step_size: PMIC voltage step size (in uv)
diff --git a/arch/arm/plat-omap/include/plat/voltage.h b/arch/arm/plat-omap/include/plat/voltage.h
index 0a6a482..5be4d5d 100644
--- a/arch/arm/plat-omap/include/plat/voltage.h
+++ b/arch/arm/plat-omap/include/plat/voltage.h
@@ -11,10 +11,29 @@
#ifndef __ARCH_ARM_OMAP_VOLTAGE_H
#define __ARCH_ARM_OMAP_VOLTAGE_H
+/**
+ * struct omap_volt_data - Omap voltage specific data.
+ * @voltage_nominal: The possible voltage value in uV
+ * @sr_efuse_offs: The offset of the efuse register(from system
+ * control module base address) from where to read
+ * the n-target value for the smartreflex module.
+ * @sr_errminlimit: Error min limit value for smartreflex. This value
+ * differs at differnet opp and thus is linked
+ * with voltage.
+ * @vp_errorgain: Error gain value for the voltage processor. This
+ * field also differs according to the voltage/opp.
+ */
+struct omap_volt_data {
+ u32 volt_nominal;
+ u32 sr_efuse_offs;
+ u8 sr_errminlimit;
+ u8 vp_errgain;
+};
struct voltagedomain;
struct voltagedomain *voltdm_lookup(const char *name);
int voltdm_scale(struct voltagedomain *voltdm, unsigned long target_volt);
unsigned long voltdm_get_voltage(struct voltagedomain *voltdm);
-
+struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
+ unsigned long volt);
#endif
--
1.7.5.4
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
