From: Tony Luck <tony.luck@xxxxxxxxx> ACPI 5.0 provides extensions to the EINJ mechanism to specify the target for the error injection - by APICID for cpu related errors, by address for memory related errors, and by segment/bus/device/function for PCIe related errors. Also extensions for vendor specific error injections. Tested-by: Chen Gong <gong.chen@xxxxxxxxxxxxxxx> Signed-off-by: Tony Luck <tony.luck@xxxxxxxxx> Signed-off-by: Len Brown <len.brown@xxxxxxxxx> --- Documentation/acpi/apei/einj.txt | 43 ++++++-- drivers/acpi/apei/einj.c | 217 +++++++++++++++++++++++++++++++------ include/acpi/actbl1.h | 3 +- 3 files changed, 215 insertions(+), 48 deletions(-) diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt index 5cc699b..95a2b22 100644 --- a/Documentation/acpi/apei/einj.txt +++ b/Documentation/acpi/apei/einj.txt @@ -47,20 +47,41 @@ directory apei/einj. The following files are provided. - param1 This file is used to set the first error parameter value. Effect of - parameter depends on error_type specified. For memory error, this is - physical memory address. Only available if param_extension module - parameter is specified. + parameter depends on error_type specified. - param2 This file is used to set the second error parameter value. Effect of - parameter depends on error_type specified. For memory error, this is - physical memory address mask. Only available if param_extension - module parameter is specified. + parameter depends on error_type specified. -Injecting parameter support is a BIOS version specific extension, that -is, it only works on some BIOS version. If you want to use it, please -make sure your BIOS version has the proper support and specify -"param_extension=y" in module parameter. +BIOS versions based in the ACPI 4.0 specification have limited options +to control where the errors are injected. Your BIOS may support an +extension (enabled with the param_extension=1 module parameter, or +boot command line einj.param_extension=1). This allows the address +and mask for memory injections to be specified by the param1 and +param2 files in apei/einj. + +BIOS versions using the ACPI 5.0 specification have more control over +the target of the injection. For processor related errors (type 0x1, +0x2 and 0x4) the APICID of the target should be provided using the +param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20) +the address is set using param1 with a mask in param2 (0x0 is equivalent +to all ones). For PCI express errors (type 0x80, 0x80 and 0x100) the +segment, bus, device and function are specified using param1: + + 31 24 23 16 15 11 10 8 7 0 + +-------------------------------------------------+ + | segment | bus | device | function | reserved | + +-------------------------------------------------+ + +An ACPI 5.0 BIOS may also allow vendor specific errors to be injected. +In this case a file named vendor will contain identifying information +from the BIOS that hopefully will allow an application wishing to use +the vendor specific extension to tell that they are running on a BIOS +that supports it. All vendor extensions have the 0x80000000 bit set in +error_type. A file vendor_flags controls the interpretation of param1 +and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor +documentation for details (and expect changes to this API if vendors +creativity in using this feature expands beyond our expectations). For more information about EINJ, please refer to ACPI specification -version 4.0, section 17.5. +version 4.0, section 17.5 and ACPI 5.0, section 18.6. diff --git a/drivers/acpi/apei/einj.c b/drivers/acpi/apei/einj.c index 589b96c..1bc1f309 100644 --- a/drivers/acpi/apei/einj.c +++ b/drivers/acpi/apei/einj.c @@ -43,6 +43,42 @@ #define FIRMWARE_TIMEOUT (1 * NSEC_PER_MSEC) /* + * ACPI version 5 provides a SET_ERROR_TYPE_WITH_ADDRESS action. + */ +static int acpi5; + +struct set_error_type_with_address { + u32 type; + u32 vendor_extension; + u32 flags; + u32 apicid; + u64 memory_address; + u64 memory_address_range; + u32 pcie_sbdf; +}; +enum { + SETWA_FLAGS_APICID = 1, + SETWA_FLAGS_MEM = 2, + SETWA_FLAGS_PCIE_SBDF = 4, +}; + +/* + * Vendor extensions for platform specific operations + */ +struct vendor_error_type_extension { + u32 length; + u32 pcie_sbdf; + u16 vendor_id; + u16 device_id; + u8 rev_id; + u8 reserved[3]; +}; + +static u32 vendor_flags; +static struct debugfs_blob_wrapper vendor_blob; +static char vendor_dev[64]; + +/* * Some BIOSes allow parameters to the SET_ERROR_TYPE entries in the * EINJ table through an unpublished extension. Use with caution as * most will ignore the parameter and make their own choice of address @@ -103,7 +139,7 @@ static struct apei_exec_ins_type einj_ins_type[] = { */ static DEFINE_MUTEX(einj_mutex); -static struct einj_parameter *einj_param; +static void *einj_param; #ifndef writeq static inline void writeq(__u64 val, volatile void __iomem *addr) @@ -158,10 +194,31 @@ static int einj_timedout(u64 *t) return 0; } -static u64 einj_get_parameter_address(void) +static void check_vendor_extension(u64 paddr, + struct set_error_type_with_address *v5param) +{ + int offset = readl(&v5param->vendor_extension); + struct vendor_error_type_extension *v; + u32 sbdf; + + if (!offset) + return; + v = ioremap(paddr + offset, sizeof(*v)); + if (!v) + return; + sbdf = readl(&v->pcie_sbdf); + sprintf(vendor_dev, "%x:%x:%x.%x vendor_id=%x device_id=%x rev_id=%x\n", + sbdf >> 24, (sbdf >> 16) & 0xff, (sbdf >> 11) & 0x1f, (sbdf >> 8) & 0x7, + readw(&v->vendor_id), readw(&v->device_id), + readb(&v->rev_id)); + iounmap(v); +} + +static void *einj_get_parameter_address(void) { int i; - u64 paddr = 0; + u64 paddrv4 = 0, paddrv5 = 0; + void *param; struct acpi_whea_header *entry; entry = EINJ_TAB_ENTRY(einj_tab); @@ -170,12 +227,40 @@ static u64 einj_get_parameter_address(void) entry->instruction == ACPI_EINJ_WRITE_REGISTER && entry->register_region.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) - memcpy(&paddr, &entry->register_region.address, - sizeof(paddr)); + memcpy(&paddrv4, &entry->register_region.address, + sizeof(paddrv4)); + if (entry->action == ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS && + entry->instruction == ACPI_EINJ_WRITE_REGISTER && + entry->register_region.space_id == + ACPI_ADR_SPACE_SYSTEM_MEMORY) + memcpy(&paddrv5, &entry->register_region.address, + sizeof(paddrv5)); entry++; } + if (paddrv5) { + struct set_error_type_with_address *v5param; + + v5param = ioremap(paddrv5, sizeof(*v5param)); + if (v5param) { + acpi5 = 1; + check_vendor_extension(paddrv5, v5param); + return v5param; + } + } + if (paddrv4) { + struct einj_parameter *v4param; + + v4param = ioremap(paddrv4, sizeof(*v4param)); + if (!v4param) + return 0; + if (readq(&v4param->reserved1) || readq(&v4param->reserved2)) { + iounmap(param); + return 0; + } + return v4param; + } - return paddr; + return 0; } /* do sanity check to trigger table */ @@ -293,12 +378,56 @@ static int __einj_error_inject(u32 type, u64 param1, u64 param2) if (rc) return rc; apei_exec_ctx_set_input(&ctx, type); - rc = apei_exec_run(&ctx, ACPI_EINJ_SET_ERROR_TYPE); - if (rc) - return rc; - if (einj_param) { - writeq(param1, &einj_param->param1); - writeq(param2, &einj_param->param2); + if (acpi5) { + struct set_error_type_with_address *v5param = einj_param; + + writel(type, &v5param->type); + if (type & 0x80000000) { + switch (vendor_flags) { + case SETWA_FLAGS_APICID: + writel(param1, &v5param->apicid); + break; + case SETWA_FLAGS_MEM: + writeq(param1, &v5param->memory_address); + writeq(param2, &v5param->memory_address_range); + break; + case SETWA_FLAGS_PCIE_SBDF: + writel(param1, &v5param->pcie_sbdf); + break; + } + writel(vendor_flags, &v5param->flags); + } else { + switch (type) { + case ACPI_EINJ_PROCESSOR_CORRECTABLE: + case ACPI_EINJ_PROCESSOR_UNCORRECTABLE: + case ACPI_EINJ_PROCESSOR_FATAL: + writel(param1, &v5param->apicid); + writel(SETWA_FLAGS_APICID, &v5param->flags); + break; + case ACPI_EINJ_MEMORY_CORRECTABLE: + case ACPI_EINJ_MEMORY_UNCORRECTABLE: + case ACPI_EINJ_MEMORY_FATAL: + writeq(param1, &v5param->memory_address); + writeq(param2, &v5param->memory_address_range); + writel(SETWA_FLAGS_MEM, &v5param->flags); + break; + case ACPI_EINJ_PCIX_CORRECTABLE: + case ACPI_EINJ_PCIX_UNCORRECTABLE: + case ACPI_EINJ_PCIX_FATAL: + writel(param1, &v5param->pcie_sbdf); + writel(SETWA_FLAGS_PCIE_SBDF, &v5param->flags); + break; + } + } + } else { + rc = apei_exec_run(&ctx, ACPI_EINJ_SET_ERROR_TYPE); + if (rc) + return rc; + if (einj_param) { + struct einj_parameter *v4param = einj_param; + writeq(param1, &v4param->param1); + writeq(param2, &v4param->param2); + } } rc = apei_exec_run(&ctx, ACPI_EINJ_EXECUTE_OPERATION); if (rc) @@ -408,15 +537,25 @@ static int error_type_set(void *data, u64 val) { int rc; u32 available_error_type = 0; + u32 tval, vendor; + + /* + * Vendor defined types have 0x80000000 bit set, and + * are not enumerated by ACPI_EINJ_GET_ERROR_TYPE + */ + vendor = val & 0x80000000; + tval = val & 0x7fffffff; /* Only one error type can be specified */ - if (val & (val - 1)) - return -EINVAL; - rc = einj_get_available_error_type(&available_error_type); - if (rc) - return rc; - if (!(val & available_error_type)) + if (tval & (tval - 1)) return -EINVAL; + if (!vendor) { + rc = einj_get_available_error_type(&available_error_type); + if (rc) + return rc; + if (!(val & available_error_type)) + return -EINVAL; + } error_type = val; return 0; @@ -455,7 +594,6 @@ static int einj_check_table(struct acpi_table_einj *einj_tab) static int __init einj_init(void) { int rc; - u64 param_paddr; acpi_status status; struct dentry *fentry; struct apei_exec_context ctx; @@ -509,23 +647,30 @@ static int __init einj_init(void) rc = apei_exec_pre_map_gars(&ctx); if (rc) goto err_release; - if (param_extension) { - param_paddr = einj_get_parameter_address(); - if (param_paddr) { - einj_param = ioremap(param_paddr, sizeof(*einj_param)); - rc = -ENOMEM; - if (!einj_param) - goto err_unmap; - fentry = debugfs_create_x64("param1", S_IRUSR | S_IWUSR, - einj_debug_dir, &error_param1); - if (!fentry) - goto err_unmap; - fentry = debugfs_create_x64("param2", S_IRUSR | S_IWUSR, - einj_debug_dir, &error_param2); - if (!fentry) - goto err_unmap; - } else - pr_warn(EINJ_PFX "Parameter extension is not supported.\n"); + + einj_param = einj_get_parameter_address(); + if ((param_extension || acpi5) && einj_param) { + fentry = debugfs_create_x64("param1", S_IRUSR | S_IWUSR, + einj_debug_dir, &error_param1); + if (!fentry) + goto err_unmap; + fentry = debugfs_create_x64("param2", S_IRUSR | S_IWUSR, + einj_debug_dir, &error_param2); + if (!fentry) + goto err_unmap; + } + + if (vendor_dev[0]) { + vendor_blob.data = vendor_dev; + vendor_blob.size = strlen(vendor_dev); + fentry = debugfs_create_blob("vendor", S_IRUSR, + einj_debug_dir, &vendor_blob); + if (!fentry) + goto err_unmap; + fentry = debugfs_create_x32("vendor_flags", S_IRUSR | S_IWUSR, + einj_debug_dir, &vendor_flags); + if (!fentry) + goto err_unmap; } pr_info(EINJ_PFX "Error INJection is initialized.\n"); diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h index 7504bc9..f25d7ef 100644 --- a/include/acpi/actbl1.h +++ b/include/acpi/actbl1.h @@ -228,7 +228,8 @@ enum acpi_einj_actions { ACPI_EINJ_EXECUTE_OPERATION = 5, ACPI_EINJ_CHECK_BUSY_STATUS = 6, ACPI_EINJ_GET_COMMAND_STATUS = 7, - ACPI_EINJ_ACTION_RESERVED = 8, /* 8 and greater are reserved */ + ACPI_EINJ_SET_ERROR_TYPE_WITH_ADDRESS = 8, + ACPI_EINJ_ACTION_RESERVED = 9, /* 9 and greater are reserved */ ACPI_EINJ_TRIGGER_ERROR = 0xFF /* Except for this value */ }; -- 1.7.9.rc1 _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/linux-pm