On Tue, Jan 10, 2012 at 09:46:22PM +0100, Rafael J. Wysocki wrote: > On Tuesday, January 10, 2012, mark gross wrote: > > On Mon, Jan 09, 2012 at 10:27:29PM +0100, Rafael J. Wysocki wrote: > > > On Monday, January 09, 2012, mark gross wrote: > > > > On Sun, Jan 08, 2012 at 11:59:24PM +0100, Rafael J. Wysocki wrote: > > > > > On Friday, January 06, 2012, mark gross wrote: > > > > > > On Fri, Jan 06, 2012 at 02:36:20AM +0200, Antti P Miettinen wrote: > > > > > > > The inspiration for this patch series is the N9 CPU frequency boost > > > > > > > upon input events: > > > > > > > > > > > > > > http://www.spinics.net/lists/cpufreq/msg00667.html > > > > > > > > > > > > > > and the related changes in git://codeaurora.org/kernel/msm.git tree. > > > > > > > Those patches modify the ondemand cpufreq governor. This patch series > > > > > > > adds minimum and maximum CPU frequency as PM QoS parameters and > > > > > > > modifies the cpufreq core to enforce the PM QoS limits. There is also > > > > > > > an example module for boosting the frequency upon input events. > > > > > > > > > > > > > > I've been testing these changes against Ubuntu 3.2 kernel on a Dell > > > > > > > E6420 with the ACPI cpufreq driver. The patches are against > > > > > > > linux-next/master, compile tested against it. > > > > > > > > > > > > > > --Antti > > > > > > > > > > > > > > Alex Frid (1): > > > > > > > PM QoS: Simplify PM QoS expansion/merge > > > > > > > > > > > > > > Antti P Miettinen (5): > > > > > > > PM QoS: Add CPU frequency min/max as PM QoS params > > > > > > > cpufreq: Export user_policy min/max > > > > > > > cpufreq: Preserve sysfs min/max request > > > > > > > cpufreq: Enforce PM QoS min/max limits > > > > > > > input: CPU frequency booster > > > > > > > > > > > > > > drivers/cpufreq/cpufreq.c | 57 +++++++++++++- > > > > > > > drivers/input/Kconfig | 9 ++ > > > > > > > drivers/input/Makefile | 1 + > > > > > > > drivers/input/input-cfboost.c | 174 +++++++++++++++++++++++++++++++++++++++++ > > > > > > > include/linux/pm_qos.h | 19 ++++- > > > > > > > kernel/power/qos.c | 55 ++++++++++---- > > > > > > > 6 files changed, 293 insertions(+), 22 deletions(-) > > > > > > > create mode 100644 drivers/input/input-cfboost.c > > > > > > > > > > > > > > > > > > > The following is my version of part of this patch set I was tinkering > > > > > > with. Its missing the cpufreq notification this change has and doesn't > > > > > > do anything WRT cfboost. > > > > > > > > > > > > Would it be ok if we could consolidate our two implementations and > > > > > > completely separate the cfboost stuff as a separate patch set? > > > > > > > > > > > > My code below is missing the cpufreq notification logic you have. > > > > > > > > > > Well, I have one substantial problem with this approach. Namely, our > > > > > current PM QoS infrastructure is not suitable for throughput constraints, > > > > > because they should be additive, unlike the latency ones. > > > > > > > > > > Namely, if sombody requests throughput X and someone else Y, the resulting > > > > > combined throughput should be X+Y rather than max(X, Y). > > > > > > > > That can be done easy enough. However; in practice I'm not convinced > > > > doing and additive aggregation of the requested QoS would be any better > > > > than just taking the max. > > > > > > Well, I'd say it's necessary for correctness, perhaps not for the CPU, but in > > > general. If Y is the max, then the subsystem that requested X may easily > > > starve whoever requested the Y by using all of the bandwidth it asked for. > > > > I was thinking about this from the CPU point of view more over the day. > > Given that there are many times more than one make the qos requests > > additive will result in quickly requesting more cpu than is available > > and waisting a lot of power. Also additive aggregation falls over a > > bit on with multi-core. > > > > As the consumer of the cpu resources are tasks, and we can only run one > > task at a time on a cpu, I'm talking myself into thinking that max > > *is* the right way to go for cpu throughput (i.e. frequency). > > I agree, but I wonder what units of throughput should be used in that case? I was thinking of using the same units that cpufreq works in. --mark _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linuxfoundation.org/mailman/listinfo/linux-pm
