Re: [PATCH] PM: add macro to test for runtime PM events

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Thursday, August 18, 2011, Alan Stern wrote:
> This patch (as1482) adds a macro for testing whether or not a
> pm_message value represents an autosuspend or autoresume (i.e., a
> runtime PM) event.  Encapsulating this notion seems preferable to
> open-coding the test all over the place.
> 
> Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
> 
> ---
> 
> This is a minor change in the PM API, but most of the affected files 
> are in the USB subsystem.  Therefore either Rafael or Greg might prefer 
> to accept this patch.

I can take the patch if Greg is fine with that.

Thanks,
Rafael

 
>  Documentation/usb/power-management.txt |    8 ++++----
>  drivers/bluetooth/btusb.c              |    2 +-
>  drivers/hid/hid-picolcd.c              |    2 +-
>  drivers/hid/usbhid/hid-core.c          |    7 +++----
>  drivers/net/usb/usbnet.c               |    2 +-
>  drivers/net/wimax/i2400m/usb.c         |    4 ++--
>  drivers/usb/class/cdc-acm.c            |    2 +-
>  drivers/usb/class/cdc-wdm.c            |    6 +++---
>  drivers/usb/core/driver.c              |    9 ++++-----
>  drivers/usb/core/hcd.c                 |    4 ++--
>  drivers/usb/core/hub.c                 |   10 +++++-----
>  drivers/usb/serial/sierra.c            |    2 +-
>  drivers/usb/serial/usb_wwan.c          |    2 +-
>  include/linux/pm.h                     |    2 ++
>  sound/usb/card.c                       |    2 +-
>  15 files changed, 32 insertions(+), 32 deletions(-)
> 
> Index: usb-3.1/include/linux/pm.h
> ===================================================================
> --- usb-3.1.orig/include/linux/pm.h
> +++ usb-3.1/include/linux/pm.h
> @@ -366,6 +366,8 @@ extern struct dev_pm_ops generic_subsys_
>  #define PMSG_AUTO_RESUME	((struct pm_message) \
>  					{ .event = PM_EVENT_AUTO_RESUME, })
>  
> +#define PMSG_IS_AUTO(msg)	(((msg).event & PM_EVENT_AUTO) != 0)
> +
>  /**
>   * Device run-time power management status.
>   *
> Index: usb-3.1/Documentation/usb/power-management.txt
> ===================================================================
> --- usb-3.1.orig/Documentation/usb/power-management.txt
> +++ usb-3.1/Documentation/usb/power-management.txt
> @@ -439,10 +439,10 @@ cause autosuspends to fail with -EBUSY i
>  device.
>  
>  External suspend calls should never be allowed to fail in this way,
> -only autosuspend calls.  The driver can tell them apart by checking
> -the PM_EVENT_AUTO bit in the message.event argument to the suspend
> -method; this bit will be set for internal PM events (autosuspend) and
> -clear for external PM events.
> +only autosuspend calls.  The driver can tell them apart by applying
> +the PMSG_IS_AUTO() macro to the message argument to the suspend
> +method; it will return True for internal PM events (autosuspend) and
> +False for external PM events.
>  
>  
>  	Mutual exclusion
> Index: usb-3.1/drivers/net/usb/usbnet.c
> ===================================================================
> --- usb-3.1.orig/drivers/net/usb/usbnet.c
> +++ usb-3.1/drivers/net/usb/usbnet.c
> @@ -1470,7 +1470,7 @@ int usbnet_suspend (struct usb_interface
>  	if (!dev->suspend_count++) {
>  		spin_lock_irq(&dev->txq.lock);
>  		/* don't autosuspend while transmitting */
> -		if (dev->txq.qlen && (message.event & PM_EVENT_AUTO)) {
> +		if (dev->txq.qlen && PMSG_IS_AUTO(message)) {
>  			spin_unlock_irq(&dev->txq.lock);
>  			return -EBUSY;
>  		} else {
> Index: usb-3.1/drivers/net/wimax/i2400m/usb.c
> ===================================================================
> --- usb-3.1.orig/drivers/net/wimax/i2400m/usb.c
> +++ usb-3.1/drivers/net/wimax/i2400m/usb.c
> @@ -599,7 +599,7 @@ void i2400mu_disconnect(struct usb_inter
>   *
>   *    As well, the device might refuse going to sleep for whichever
>   *    reason. In this case we just fail. For system suspend/hibernate,
> - *    we *can't* fail. We check PM_EVENT_AUTO to see if the
> + *    we *can't* fail. We check PMSG_IS_AUTO to see if the
>   *    suspend call comes from the USB stack or from the system and act
>   *    in consequence.
>   *
> @@ -615,7 +615,7 @@ int i2400mu_suspend(struct usb_interface
>  	struct i2400m *i2400m = &i2400mu->i2400m;
>  
>  #ifdef CONFIG_PM
> -	if (pm_msg.event & PM_EVENT_AUTO)
> +	if (PMSG_IS_AUTO(pm_msg))
>  		is_autosuspend = 1;
>  #endif
>  
> Index: usb-3.1/sound/usb/card.c
> ===================================================================
> --- usb-3.1.orig/sound/usb/card.c
> +++ usb-3.1/sound/usb/card.c
> @@ -628,7 +628,7 @@ static int usb_audio_suspend(struct usb_
>  	if (chip == (void *)-1L)
>  		return 0;
>  
> -	if (!(message.event & PM_EVENT_AUTO)) {
> +	if (!PMSG_IS_AUTO(message)) {
>  		snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
>  		if (!chip->num_suspended_intf++) {
>  			list_for_each(p, &chip->pcm_list) {
> Index: usb-3.1/drivers/bluetooth/btusb.c
> ===================================================================
> --- usb-3.1.orig/drivers/bluetooth/btusb.c
> +++ usb-3.1/drivers/bluetooth/btusb.c
> @@ -1103,7 +1103,7 @@ static int btusb_suspend(struct usb_inte
>  		return 0;
>  
>  	spin_lock_irq(&data->txlock);
> -	if (!((message.event & PM_EVENT_AUTO) && data->tx_in_flight)) {
> +	if (!(PMSG_IS_AUTO(message) && data->tx_in_flight)) {
>  		set_bit(BTUSB_SUSPENDING, &data->flags);
>  		spin_unlock_irq(&data->txlock);
>  	} else {
> Index: usb-3.1/drivers/hid/hid-picolcd.c
> ===================================================================
> --- usb-3.1.orig/drivers/hid/hid-picolcd.c
> +++ usb-3.1/drivers/hid/hid-picolcd.c
> @@ -2409,7 +2409,7 @@ static int picolcd_raw_event(struct hid_
>  #ifdef CONFIG_PM
>  static int picolcd_suspend(struct hid_device *hdev, pm_message_t message)
>  {
> -	if (message.event & PM_EVENT_AUTO)
> +	if (PMSG_IS_AUTO(message))
>  		return 0;
>  
>  	picolcd_suspend_backlight(hid_get_drvdata(hdev));
> Index: usb-3.1/drivers/hid/usbhid/hid-core.c
> ===================================================================
> --- usb-3.1.orig/drivers/hid/usbhid/hid-core.c
> +++ usb-3.1/drivers/hid/usbhid/hid-core.c
> @@ -1332,7 +1332,7 @@ static int hid_suspend(struct usb_interf
>  	struct usbhid_device *usbhid = hid->driver_data;
>  	int status;
>  
> -	if (message.event & PM_EVENT_AUTO) {
> +	if (PMSG_IS_AUTO(message)) {
>  		spin_lock_irq(&usbhid->lock);	/* Sync with error handler */
>  		if (!test_bit(HID_RESET_PENDING, &usbhid->iofl)
>  		    && !test_bit(HID_CLEAR_HALT, &usbhid->iofl)
> @@ -1367,7 +1367,7 @@ static int hid_suspend(struct usb_interf
>  			return -EIO;
>  	}
>  
> -	if (!ignoreled && (message.event & PM_EVENT_AUTO)) {
> +	if (!ignoreled && PMSG_IS_AUTO(message)) {
>  		spin_lock_irq(&usbhid->lock);
>  		if (test_bit(HID_LED_ON, &usbhid->iofl)) {
>  			spin_unlock_irq(&usbhid->lock);
> @@ -1380,8 +1380,7 @@ static int hid_suspend(struct usb_interf
>  	hid_cancel_delayed_stuff(usbhid);
>  	hid_cease_io(usbhid);
>  
> -	if ((message.event & PM_EVENT_AUTO) &&
> -			test_bit(HID_KEYS_PRESSED, &usbhid->iofl)) {
> +	if (PMSG_IS_AUTO(message) && test_bit(HID_KEYS_PRESSED, &usbhid->iofl)) {
>  		/* lost race against keypresses */
>  		status = hid_start_in(hid);
>  		if (status < 0)
> Index: usb-3.1/drivers/usb/class/cdc-acm.c
> ===================================================================
> --- usb-3.1.orig/drivers/usb/class/cdc-acm.c
> +++ usb-3.1/drivers/usb/class/cdc-acm.c
> @@ -1305,7 +1305,7 @@ static int acm_suspend(struct usb_interf
>  	struct acm *acm = usb_get_intfdata(intf);
>  	int cnt;
>  
> -	if (message.event & PM_EVENT_AUTO) {
> +	if (PMSG_IS_AUTO(message)) {
>  		int b;
>  
>  		spin_lock_irq(&acm->write_lock);
> Index: usb-3.1/drivers/usb/class/cdc-wdm.c
> ===================================================================
> --- usb-3.1.orig/drivers/usb/class/cdc-wdm.c
> +++ usb-3.1/drivers/usb/class/cdc-wdm.c
> @@ -798,11 +798,11 @@ static int wdm_suspend(struct usb_interf
>  	dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor);
>  
>  	/* if this is an autosuspend the caller does the locking */
> -	if (!(message.event & PM_EVENT_AUTO))
> +	if (!PMSG_IS_AUTO(message))
>  		mutex_lock(&desc->lock);
>  	spin_lock_irq(&desc->iuspin);
>  
> -	if ((message.event & PM_EVENT_AUTO) &&
> +	if (PMSG_IS_AUTO(message) &&
>  			(test_bit(WDM_IN_USE, &desc->flags)
>  			|| test_bit(WDM_RESPONDING, &desc->flags))) {
>  		spin_unlock_irq(&desc->iuspin);
> @@ -815,7 +815,7 @@ static int wdm_suspend(struct usb_interf
>  		kill_urbs(desc);
>  		cancel_work_sync(&desc->rxwork);
>  	}
> -	if (!(message.event & PM_EVENT_AUTO))
> +	if (!PMSG_IS_AUTO(message))
>  		mutex_unlock(&desc->lock);
>  
>  	return rv;
> Index: usb-3.1/drivers/usb/core/driver.c
> ===================================================================
> --- usb-3.1.orig/drivers/usb/core/driver.c
> +++ usb-3.1/drivers/usb/core/driver.c
> @@ -1046,8 +1046,7 @@ static int usb_resume_device(struct usb_
>  	/* Non-root devices on a full/low-speed bus must wait for their
>  	 * companion high-speed root hub, in case a handoff is needed.
>  	 */
> -	if (!(msg.event & PM_EVENT_AUTO) && udev->parent &&
> -			udev->bus->hs_companion)
> +	if (!PMSG_IS_AUTO(msg) && udev->parent && udev->bus->hs_companion)
>  		device_pm_wait_for_dev(&udev->dev,
>  				&udev->bus->hs_companion->root_hub->dev);
>  
> @@ -1075,7 +1074,7 @@ static int usb_suspend_interface(struct 
>  
>  	if (driver->suspend) {
>  		status = driver->suspend(intf, msg);
> -		if (status && !(msg.event & PM_EVENT_AUTO))
> +		if (status && !PMSG_IS_AUTO(msg))
>  			dev_err(&intf->dev, "%s error %d\n",
>  					"suspend", status);
>  	} else {
> @@ -1189,7 +1188,7 @@ static int usb_suspend_both(struct usb_d
>  			status = usb_suspend_interface(udev, intf, msg);
>  
>  			/* Ignore errors during system sleep transitions */
> -			if (!(msg.event & PM_EVENT_AUTO))
> +			if (!PMSG_IS_AUTO(msg))
>  				status = 0;
>  			if (status != 0)
>  				break;
> @@ -1199,7 +1198,7 @@ static int usb_suspend_both(struct usb_d
>  		status = usb_suspend_device(udev, msg);
>  
>  		/* Again, ignore errors during system sleep transitions */
> -		if (!(msg.event & PM_EVENT_AUTO))
> +		if (!PMSG_IS_AUTO(msg))
>  			status = 0;
>  	}
>  
> Index: usb-3.1/drivers/usb/core/hcd.c
> ===================================================================
> --- usb-3.1.orig/drivers/usb/core/hcd.c
> +++ usb-3.1/drivers/usb/core/hcd.c
> @@ -1960,7 +1960,7 @@ int hcd_bus_suspend(struct usb_device *r
>  	int		old_state = hcd->state;
>  
>  	dev_dbg(&rhdev->dev, "bus %s%s\n",
> -			(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "suspend");
> +			(PMSG_IS_AUTO(msg) ? "auto-" : ""), "suspend");
>  	if (HCD_DEAD(hcd)) {
>  		dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "suspend");
>  		return 0;
> @@ -1996,7 +1996,7 @@ int hcd_bus_resume(struct usb_device *rh
>  	int		old_state = hcd->state;
>  
>  	dev_dbg(&rhdev->dev, "usb %s%s\n",
> -			(msg.event & PM_EVENT_AUTO ? "auto-" : ""), "resume");
> +			(PMSG_IS_AUTO(msg) ? "auto-" : ""), "resume");
>  	if (HCD_DEAD(hcd)) {
>  		dev_dbg(&rhdev->dev, "skipped %s of dead bus\n", "resume");
>  		return 0;
> Index: usb-3.1/drivers/usb/core/hub.c
> ===================================================================
> --- usb-3.1.orig/drivers/usb/core/hub.c
> +++ usb-3.1/drivers/usb/core/hub.c
> @@ -2342,7 +2342,7 @@ int usb_port_suspend(struct usb_device *
>  			dev_dbg(&udev->dev, "won't remote wakeup, status %d\n",
>  					status);
>  			/* bail if autosuspend is requested */
> -			if (msg.event & PM_EVENT_AUTO)
> +			if (PMSG_IS_AUTO(msg))
>  				return status;
>  		}
>  	}
> @@ -2367,12 +2367,12 @@ int usb_port_suspend(struct usb_device *
>  				USB_CTRL_SET_TIMEOUT);
>  
>  		/* System sleep transitions should never fail */
> -		if (!(msg.event & PM_EVENT_AUTO))
> +		if (!PMSG_IS_AUTO(msg))
>  			status = 0;
>  	} else {
>  		/* device has up to 10 msec to fully suspend */
>  		dev_dbg(&udev->dev, "usb %ssuspend\n",
> -				(msg.event & PM_EVENT_AUTO ? "auto-" : ""));
> +				(PMSG_IS_AUTO(msg) ? "auto-" : ""));
>  		usb_set_device_state(udev, USB_STATE_SUSPENDED);
>  		msleep(10);
>  	}
> @@ -2523,7 +2523,7 @@ int usb_port_resume(struct usb_device *u
>  	} else {
>  		/* drive resume for at least 20 msec */
>  		dev_dbg(&udev->dev, "usb %sresume\n",
> -				(msg.event & PM_EVENT_AUTO ? "auto-" : ""));
> +				(PMSG_IS_AUTO(msg) ? "auto-" : ""));
>  		msleep(25);
>  
>  		/* Virtual root hubs can trigger on GET_PORT_STATUS to
> @@ -2625,7 +2625,7 @@ static int hub_suspend(struct usb_interf
>  		udev = hdev->children [port1-1];
>  		if (udev && udev->can_submit) {
>  			dev_warn(&intf->dev, "port %d nyet suspended\n", port1);
> -			if (msg.event & PM_EVENT_AUTO)
> +			if (PMSG_IS_AUTO(msg))
>  				return -EBUSY;
>  		}
>  	}
> Index: usb-3.1/drivers/usb/serial/sierra.c
> ===================================================================
> --- usb-3.1.orig/drivers/usb/serial/sierra.c
> +++ usb-3.1/drivers/usb/serial/sierra.c
> @@ -1009,7 +1009,7 @@ static int sierra_suspend(struct usb_ser
>  	struct sierra_intf_private *intfdata;
>  	int b;
>  
> -	if (message.event & PM_EVENT_AUTO) {
> +	if (PMSG_IS_AUTO(message)) {
>  		intfdata = serial->private;
>  		spin_lock_irq(&intfdata->susp_lock);
>  		b = intfdata->in_flight;
> Index: usb-3.1/drivers/usb/serial/usb_wwan.c
> ===================================================================
> --- usb-3.1.orig/drivers/usb/serial/usb_wwan.c
> +++ usb-3.1/drivers/usb/serial/usb_wwan.c
> @@ -651,7 +651,7 @@ int usb_wwan_suspend(struct usb_serial *
>  
>  	dbg("%s entered", __func__);
>  
> -	if (message.event & PM_EVENT_AUTO) {
> +	if (PMSG_IS_AUTO(message)) {
>  		spin_lock_irq(&intfdata->susp_lock);
>  		b = intfdata->in_flight;
>  		spin_unlock_irq(&intfdata->susp_lock);
> 
> 
> 

_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm


[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux