On Tuesday 16 August 2011 07:13 PM, jean.pihet@xxxxxxxxxxxxxx wrote:
> From: Jean Pihet<j-pihet@xxxxxx>
>
> Figures are added to the power domains structs.
>
> Note: the figures are preliminary figures. More accurate measurements
> are needed. Also the conditions of measurements shall be investigated
> and described.
>
> Tested on OMAP3 Beagleboard in RET/OFF using wake-up latency constraints
> on MPU, CORE and PER.
>
> Signed-off-by: Jean Pihet<j-pihet@xxxxxx>
> ---
> arch/arm/mach-omap2/powerdomains3xxx_data.c | 77 +++++++++++++++++++++++++++
> 1 files changed, 77 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/powerdomains3xxx_data.c b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> index 469a920..64446e7 100644
> --- a/arch/arm/mach-omap2/powerdomains3xxx_data.c
> +++ b/arch/arm/mach-omap2/powerdomains3xxx_data.c
> @@ -31,6 +31,13 @@
>
> /*
> * Powerdomains
> + *
> + * The wakeup_lat values are derived from measurements on
> + * the actual target.
> + *
> + * Note: the latency figures are preliminary and only used
> + * for the constraints framework validation.
> + * Actual figures and measurements conditions shall be added.
> */
>
> static struct powerdomain iva2_pwrdm = {
> @@ -52,6 +59,13 @@ static struct powerdomain iva2_pwrdm = {
> [2] = PWRSTS_OFF_ON,
> [3] = PWRSTS_ON,
> },
> + .wakeup_lat = {
> + [PWRDM_FUNC_PWRST_OFF] = 1100,
> + [PWRDM_FUNC_PWRST_OSWR] = UNSUP_STATE,
> + [PWRDM_FUNC_PWRST_CSWR] = 350,
> + [PWRDM_FUNC_PWRST_INACTIVE] = UNSUP_STATE,
This can easily derived from the PWRST flag instead of hardcoding
it this way. Also note that INACTIVE PD isn't supported in mainline
yet because of voltage-domain dependency planned changes.
> + [PWRDM_FUNC_PWRST_ON] = 0,
All of the PD structures are manually coded. This whole file is
auto-generated and even these field generation needs to follow
that path.
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
