When I issue the command to hibernate, the image is saved to swap and the machine powers off successfully. Up to this point everything is as expected. After resuming, the image is restored but then I get this error: CPU1 not responding. However, the boot process continues and I get back to my session exactly where I hibernated. However, as would be expected from the error message, I'm only running on one CPU now. CPU0 is online, but CPU1 is offline. Trying to online CPU1 manually with: echo 1 > /sys/devices/system/cpu/cpu1/online generates a bash write error. Offlining CPU1 before the hibernate process still gives the CPU1 error when resuming. Note that suspend-to-RAM works perfectly all the times. Machine Info: dmi.bios.date: 09/27/2004 dmi.bios.vendor: Dell Computer Corporation dmi.bios.version: A07 dmi.board.name: 0M2035 dmi.board.vendor: Dell Computer Corp. dmi.chassis.type: 6 dmi.chassis.vendor: Dell Computer Corporation dmi.modalias: dmi:bvnDellComp uterCorporation:bvrA07:bd09/27/2004:svnDellComputerCorporation:pnDimension8300:pvr:rvnDellComputerCorp.:rn0M2035:rvr:cvnDellComputerCorporation:ct6:cvr: dmi.product.name: Dimension 8300 dmi.sys.vendor: Dell Computer Corporation dmesg output: [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.39.3-i686 (root@GA1A4CH) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #1 SMP Sat Jul 16 03:17:56 AST 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ff74000 (usable) [ 0.000000] BIOS-e820: 000000003ff74000 - 000000003ff76000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003ff76000 - 000000003ff97000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff97000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fecf0000 - 00000000fecf1000 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU! [ 0.000000] DMI 2.3 present. [ 0.000000] DMI: Dell Computer Corporation Dimension 8300 /0M2035, BIOS A07 09/27/2004 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x3ff74 max_arch_pfn = 0x100000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask FC0000000 write-back [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [b00fe710] fe710 [ 0.000000] initial memory mapped : 0 - 00c00000 [ 0.000000] Base memory trampoline at [b009b000] 9b000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-000000003ff74000 [ 0.000000] 0000000000 - 0000400000 page 4k [ 0.000000] 0000400000 - 003fc00000 page 2M [ 0.000000] 003fc00000 - 003ff74000 page 4k [ 0.000000] kernel direct mapping tables up to 3ff74000 @ bfb000-c00000 [ 0.000000] RAMDISK: 2fa39000 - 2ffd7000 [ 0.000000] ACPI: RSDP 000feb90 00014 (v00 DELL ) [ 0.000000] ACPI: RSDT 000fd1ca 00034 (v01 DELL 8300 00000008 ASL 00000061) [ 0.000000] ACPI: FACP 000fd1fe 00074 (v01 DELL 8300 00000008 ASL 00000061) [ 0.000000] ACPI: Override [DSDT- dt_ex], this is unsafe: tainting kernel [ 0.000000] Disabling lock debugging due to kernel taint [ 0.000000] ACPI: DSDT @ 0xfffc6e75 Table override, replaced with: [ 0.000000] ACPI: DSDT b060c0c0 02331 (v01 DELL dt_ex 00001000 INTL 20090521) [ 0.000000] ACPI: FACS 3ff74000 00040 [ 0.000000] ACPI: SSDT fffc93d8 000BA (v01 DELL st_ex 00001000 MSFT 0100000D) [ 0.000000] ACPI: APIC 000fd272 0006C (v01 DELL 8300 00000008 ASL 00000061) [ 0.000000] ACPI: BOOT 000fd2de 00028 (v01 DELL 8300 00000008 ASL 00000061) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 1023MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 3ff74000 [ 0.000000] low ram: 0 - 3ff74000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x0003ff74 [ 0.000000] HighMem empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x0003ff74 [ 0.000000] On node 0 totalpages: 261892 [ 0.000000] free_area_init_node: node 0, pgdat b0624980, node_mem_map ef773200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3952 pages, LIFO batch:0 [ 0.000000] Normal zone: 2015 pages used for memmap [ 0.000000] Normal zone: 255893 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:bec00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @ef000000 s26240 r0 d22912 u1048576 [ 0.000000] pcpu-alloc: s26240 r0 d22912 u1048576 alloc=1*4194304 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259845 [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.39.3-i686 root=UUID=9eb1494b-dd27-42a8-94ad-e78f31454dc0 ro console=ttyS0,115200n8 console=tty0 resume=/dev/sdb13 [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] allocated 4191808 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Initializing HighMem for node 0 (00000000:00000000) [ 0.000000] Memory: 1022216k/1048016k available (3634k kernel code, 25352k reserved, 1658k data, 476k init, 0k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff17000 - 0xfffff000 ( 928 kB) [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.000000] vmalloc : 0xf0774000 - 0xff7fe000 ( 240 MB) [ 0.000000] lowmem : 0xb0000000 - 0xeff74000 (1023 MB) [ 0.000000] .init : 0xb062c000 - 0xb06a3000 ( 476 kB) [ 0.000000] .data : 0xb048cacd - 0xb062b600 (1658 kB) [ 0.000000] .text : 0xb0100000 - 0xb048cacd (3634 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:512 [ 0.000000] CPU 0 irqstacks, hard=ee80c000 soft=ee80e000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2793.580 MHz processor. [ 0.010003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5589.95 BogoMIPS (lpj=9311933) [ 0.016669] pid_max: default: 32768 minimum: 301 [ 0.020057] Security Framework initialized [ 0.023350] AppArmor: AppArmor initialized [ 0.026687] Mount-cache hash table entries: 512 [ 0.030218] Initializing cgroup subsys ns [ 0.033337] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.036668] Initializing cgroup subsys memory [ 0.040011] Initializing cgroup subsys devices [ 0.043335] Initializing cgroup subsys freezer [ 0.046668] Initializing cgroup subsys net_cls [ 0.050001] Initializing cgroup subsys blkio [ 0.053360] CPU: Physical Processor ID: 0 [ 0.056667] CPU: Processor Core ID: 0 [ 0.060001] mce: CPU supports 4 MCE banks [ 0.063342] CPU0: Thermal monitoring enabled (TM1) [ 0.067172] ACPI: Core revision 20110316 [ 0.074332] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.076956] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.115786] CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09 [ 0.123325] Performance Events: Netburst events, Netburst P4/Xeon PMU driver. [ 0.126667] ... version: 0 [ 0.129994] ... bit width: 40 [ 0.133327] ... generic registers: 18 [ 0.136660] ... value mask: 000000ffffffffff [ 0.139993] ... max period: 0000007fffffffff [ 0.143326] ... fixed-purpose events: 0 [ 0.146660] ... event mask: 000000000003ffff [ 0.153346] CPU 1 irqstacks, hard=ee890000 soft=ee892000 [ 0.153350] Booting Node 0, Processors #1 [ 0.156961] smpboot cpu 1: start_ip = 9b000 [ 0.013332] Initializing CPU#1 [ 0.256672] Brought up 2 CPUs [ 0.259677] Total of 2 processors activated (11177.27 BogoMIPS). [ 0.260277] devtmpfs: initialized [ 0.263352] PM: Adding info for No Bus:platform [ 0.263509] PM: Registering ACPI NVS region at 3ff74000 (8192 bytes) [ 0.274226] xor: automatically using best checksumming function: pIII_sse [ 0.296514] pIII_sse : 3643.200 MB/sec [ 0.299984] xor: using function: pIII_sse (3643.200 MB/sec) [ 0.303376] NET: Registered protocol family 16 [ 0.310088] PM: Adding info for No Bus:vtcon0 [ 0.310135] EISA bus registered [ 0.313331] ACPI: bus type pci registered [ 0.316725] PM: Adding info for No Bus:id [ 0.316817] PCI: PCI BIOS revision 2.10 entry at 0xfbb30, last bus=2 [ 0.323316] PCI: Using configuration type 1 for base access [ 0.331205] PM: Adding info for No Bus:default [ 0.331205] bio: create slab <bio-0> at 0 [ 0.390078] raid6: int32x1 459 MB/s [ 0.449994] raid6: int32x2 962 MB/s [ 0.510024] raid6: int32x4 733 MB/s [ 0.570008] raid6: int32x8 543 MB/s [ 0.629989] raid6: mmxx1 2309 MB/s [ 0.689965] raid6: mmxx2 2940 MB/s [ 0.749974] raid6: sse1x1 1361 MB/s [ 0.809951] raid6: sse1x2 2476 MB/s [ 0.869951] raid6: sse2x1 2920 MB/s [ 0.929957] raid6: sse2x2 3152 MB/s [ 0.933276] raid6: using algorithm sse2x2 (3152 MB/s) [ 0.937362] ACPI: EC: Look up EC in DSDT [ 0.950123] ACPI: Interpreter enabled [ 0.953281] ACPI: (supports S0 S1 S3 S4 S5) [ 0.958150] ACPI: Using IOAPIC for interrupt routing [ 0.960007] PM: Adding info for acpi:LNXSYSTM:00 [ 0.960047] PM: Adding info for acpi:LNXCPU:00 [ 0.960078] PM: Adding info for acpi:LNXCPU:01 [ 0.960129] PM: Adding info for acpi:device:00 [ 0.960193] PM: Adding info for acpi:PNP0C0C:00 [ 0.960246] PM: Adding info for acpi:PNP0C01:00 [ 0.962037] PM: Adding info for acpi:PNP0A03:00 [ 0.963001] PM: Adding info for acpi:device:01 [ 0.963997] PM: Adding info for acpi:device:02 [ 0.964955] PM: Adding info for acpi:device:03 [ 0.965918] PM: Adding info for acpi:device:04 [ 0.969617] PM: Adding info for acpi:device:05 [ 0.969676] PM: Adding info for acpi:device:06 [ 0.969725] PM: Adding info for acpi:PNP0200:00 [ 0.969777] PM: Adding info for acpi:PNP0C04:00 [ 0.969831] PM: Adding info for acpi:PNP0000:00 [ 0.969882] PM: Adding info for acpi:PNP0800:00 [ 0.969944] PM: Adding info for acpi:PNP0B00:00 [ 0.969996] PM: Adding info for acpi:PNP0100:00 [ 0.974078] PM: Adding info for acpi:PNP0501:00 [ 0.975145] PM: Adding info for acpi:PNP0401:00 [ 0.975205] PM: Adding info for acpi:PNP0C01:01 [ 0.975452] PM: Adding info for acpi:PNP0C0F:00 [ 0.975549] PM: Adding info for acpi:PNP0C0F:01 [ 0.975646] PM: Adding info for acpi:PNP0C0F:02 [ 0.975744] PM: Adding info for acpi:PNP0C0F:03 [ 0.975849] PM: Adding info for acpi:PNP0C0F:04 [ 0.975958] PM: Adding info for acpi:PNP0C0F:05 [ 0.976068] PM: Adding info for acpi:PNP0C0F:06 [ 0.976167] PM: Adding info for acpi:PNP0C0F:07 [ 0.976221] PM: Adding info for acpi:device:07 [ 0.976295] PM: Adding info for acpi:LNXPWRBN:00 [ 0.983279] HEST: Table not found. [ 0.986610] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug [ 0.993577] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.996628] PM: Adding info for No Bus:pci0000:00 [ 0.996644] PM: Adding info for No Bus:0000:00 [ 1.000763] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored) [ 1.000768] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored) [ 1.000772] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored) [ 1.000775] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xfebfffff] (ignored) [ 1.000791] pci 0000:00:00.0: [8086:2578] type 0 class 0x000600 [ 1.000796] pci 0000:00:00.0: Enabling MCH 'Overflow' Device [ 1.003279] pci 0000:00:00.0: reg 10: [mem 0xe8000000-0xefffffff pref] [ 1.003320] pci 0000:00:00.0: rpm_resume flags 0x0 [ 1.003323] pci 0000:00:00.0: rpm_resume returns -11 [ 1.003342] pci 0000:00:01.0: [8086:2579] type 1 class 0x000604 [ 1.003370] pci 0000:00:01.0: rpm_resume flags 0x0 [ 1.003373] pci 0000:00:01.0: rpm_resume returns -11 [ 1.003388] pci 0000:00:06.0: [8086:257e] type 0 class 0x000880 [ 1.003400] pci 0000:00:06.0: reg 10: [mem 0xfecf0000-0xfecf0fff] [ 1.003443] pci 0000:00:06.0: rpm_resume flags 0x0 [ 1.003446] pci 0000:00:06.0: rpm_resume returns -11 [ 1.003484] pci 0000:00:1d.0: [8086:24d2] type 0 class 0x000c03 [ 1.003530] pci 0000:00:1d.0: reg 20: [io 0xff80-0xff9f] [ 1.003554] pci 0000:00:1d.0: rpm_resume flags 0x0 [ 1.003557] pci 0000:00:1d.0: rpm_resume returns -11 [ 1.003570] pci 0000:00:1d.1: [8086:24d4] type 0 class 0x000c03 [ 1.003616] pci 0000:00:1d.1: reg 20: [io 0xff60-0xff7f] [ 1.003640] pci 0000:00:1d.1: rpm_resume flags 0x0 [ 1.003643] pci 0000:00:1d.1: rpm_resume returns -11 [ 1.003655] pci 0000:00:1d.2: [8086:24d7] type 0 class 0x000c03 [ 1.003701] pci 0000:00:1d.2: reg 20: [io 0xff40-0xff5f] [ 1.003726] pci 0000:00:1d.2: rpm_resume flags 0x0 [ 1.003729] pci 0000:00:1d.2: rpm_resume returns -11 [ 1.003741] pci 0000:00:1d.3: [8086:24de] type 0 class 0x000c03 [ 1.003787] pci 0000:00:1d.3: reg 20: [io 0xff20-0xff3f] [ 1.003811] pci 0000:00:1d.3: rpm_resume flags 0x0 [ 1.003814] pci 0000:00:1d.3: rpm_resume returns -11 [ 1.003838] pci 0000:00:1d.7: [8086:24dd] type 0 class 0x000c03 [ 1.003861] pci 0000:00:1d.7: reg 10: [mem 0xffa80800-0xffa80bff] [ 1.003938] pci 0000:00:1d.7: rpm_resume flags 0x0 [ 1.003941] pci 0000:00:1d.7: rpm_resume returns -11 [ 1.003950] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.003956] pci 0000:00:1d.7: PME# disabled [ 1.003974] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604 [ 1.004008] pci 0000:00:1e.0: rpm_resume flags 0x0 [ 1.004011] pci 0000:00:1e.0: rpm_resume returns -11 [ 1.004024] pci 0000:00:1f.0: [8086:24d0] type 0 class 0x000601 [ 1.004088] pci 0000:00:1f.0: HPET at 0xfed00000 [ 1.004099] pci 0000:00:1f.0: rpm_resume flags 0x0 [ 1.004102] pci 0000:00:1f.0: rpm_resume returns -11 [ 1.004114] pci 0000:00:1f.1: [8086:24db] type 0 class 0x000101 [ 1.004129] pci 0000:00:1f.1: reg 10: [io 0x01f0-0x01f7] [ 1.004140] pci 0000:00:1f.1: reg 14: [io 0x03f4-0x03f7] [ 1.004151] pci 0000:00:1f.1: reg 18: [io 0x0170-0x0177] [ 1.004162] pci 0000:00:1f.1: reg 1c: [io 0x0374-0x0377] [ 1.004173] pci 0000:00:1f.1: reg 20: [io 0xffa0-0xffaf] [ 1.004184] pci 0000:00:1f.1: reg 24: [mem 0xfebffc00-0xfebfffff] [ 1.004202] pci 0000:00:1f.1: rpm_resume flags 0x0 [ 1.004205] pci 0000:00:1f.1: rpm_resume returns -11 [ 1.004217] pci 0000:00:1f.2: [8086:24d1] type 0 class 0x000101 [ 1.004230] pci 0000:00:1f.2: reg 10: [io 0xfe00-0xfe07] [ 1.004240] pci 0000:00:1f.2: reg 14: [io 0xfe10-0xfe13] [ 1.004250] pci 0000:00:1f.2: reg 18: [io 0xfe20-0xfe27] [ 1.004260] pci 0000:00:1f.2: reg 1c: [io 0xfe30-0xfe33] [ 1.004269] pci 0000:00:1f.2: reg 20: [io 0xfea0-0xfeaf] [ 1.004292] pci 0000:00:1f.2: rpm_resume flags 0x0 [ 1.004295] pci 0000:00:1f.2: rpm_resume returns -11 [ 1.004307] pci 0000:00:1f.3: [8086:24d3] type 0 class 0x000c05 [ 1.004353] pci 0000:00:1f.3: reg 20: [io 0xeda0-0xedbf] [ 1.004377] pci 0000:00:1f.3: rpm_resume flags 0x0 [ 1.004380] pci 0000:00:1f.3: rpm_resume returns -11 [ 1.004400] pci 0000:00:1f.5: [8086:24d5] type 0 class 0x000401 [ 1.004417] pci 0000:00:1f.5: reg 10: [io 0xee00-0xeeff] [ 1.004427] pci 0000:00:1f.5: reg 14: [io 0xedc0-0xedff] [ 1.004438] pci 0000:00:1f.5: reg 18: [mem 0xfebffa00-0xfebffbff] [ 1.004448] pci 0000:00:1f.5: reg 1c: [mem 0xfebff900-0xfebff9ff] [ 1.004483] pci 0000:00:1f.5: rpm_resume flags 0x0 [ 1.004486] pci 0000:00:1f.5: rpm_resume returns -11 [ 1.004493] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold [ 1.004498] pci 0000:00:1f.5: PME# disabled [ 1.004526] pci 0000:01:00.0: [10de:0322] type 0 class 0x000300 [ 1.004542] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfdffffff] [ 1.004551] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff pref] [ 1.004581] pci 0000:01:00.0: reg 30: [mem 0xfea00000-0xfea1ffff pref] [ 1.004597] pci 0000:01:00.0: rpm_resume flags 0x0 [ 1.004600] pci 0000:01:00.0: rpm_resume returns -11 [ 1.004641] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.006607] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.006613] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff] [ 1.006618] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 1.006654] pci 0000:02:08.0: [8086:1050] type 0 class 0x000200 [ 1.006671] pci 0000:02:08.0: reg 10: [mem 0xfcfff000-0xfcffffff] [ 1.006681] pci 0000:02:08.0: reg 14: [io 0xdf40-0xdf7f] [ 1.006732] pci 0000:02:08.0: rpm_resume flags 0x0 [ 1.006735] pci 0000:02:08.0: rpm_resume returns -11 [ 1.006742] pci 0000:02:08.0: supports D1 D2 [ 1.006745] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.006750] pci 0000:02:08.0: PME# disabled [ 1.006785] pci 0000:00:1e.0: PCI bridge to [bus 02-02] (subtractive decode) [ 1.009941] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 1.009947] pci 0000:00:1e.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 1.009953] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.009957] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode) [ 1.009960] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode) [ 1.009974] pci_bus 0000:00: on NUMA node 0 [ 1.009979] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.010215] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 1.016319] PM: Adding info for pci:0000:00:00.0 [ 1.021698] PM: Adding info for pci:0000:00:01.0 [ 1.027084] PM: Adding info for pci:0000:00:06.0 [ 1.032566] PM: Adding info for pci:0000:00:1d.0 [ 1.037957] PM: Adding info for pci:0000:00:1d.1 [ 1.043331] PM: Adding info for pci:0000:00:1d.2 [ 1.048794] PM: Adding info for pci:0000:00:1d.3 [ 1.054178] PM: Adding info for pci:0000:00:1d.7 [ 1.059428] PM: Adding info for pci:0000:00:1e.0 [ 1.064804] PM: Adding info for pci:0000:00:1f.0 [ 1.070188] PM: Adding info for pci:0000:00:1f.1 [ 1.075663] PM: Adding info for pci:0000:00:1f.2 [ 1.081039] PM: Adding info for pci:0000:00:1f.3 [ 1.086320] PM: Adding info for pci:0000:00:1f.5 [ 1.086356] PM: Adding info for pci:0000:01:00.0 [ 1.086384] PM: Adding info for No Bus:0000:01 [ 1.086424] PM: Adding info for pci:0000:02:08.0 [ 1.086449] PM: Adding info for No Bus:0000:02 [ 1.086685] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 1.093988] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 1.101778] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.109394] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.113555] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.120958] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 1.129992] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 1.138625] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.142968] PM: Adding info for No Bus:vga_arbiter [ 1.142999] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.143264] vgaarb: loaded [ 1.146726] SCSI subsystem initialized [ 1.149962] libata version 3.00 loaded. [ 1.150005] usbcore: registered new interface driver usbfs [ 1.153278] usbcore: registered new interface driver hub [ 1.156613] usbcore: registered new device driver usb [ 1.159987] wmi: Mapper loaded [ 1.163261] PCI: Using ACPI for IRQ routing [ 1.166596] PCI: pci_cache_line_size set to 64 bytes [ 1.166677] reserve RAM buffer: 000000003ff74000 - 000000003fffffff [ 1.166766] PM: Adding info for No Bus:lo [ 1.166818] NetLabel: Initializing [ 1.169928] NetLabel: domain hash size = 128 [ 1.173259] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.176606] NetLabel: unlabeled traffic allowed by default [ 1.180017] hpet clockevent registered [ 1.180022] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 1.183263] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.187640] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 1.196610] Switching to clocksource hpet [ 1.202368] Switched to NOHz mode on CPU #0 [ 1.202497] Switched to NOHz mode on CPU #1 [ 1.218956] AppArmor: AppArmor Filesystem Enabled [ 1.223754] pnp: PnP ACPI init [ 1.226866] PM: Adding info for No Bus:pnp0 [ 1.226871] ACPI: bus type pnp registered [ 1.235285] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 1.235290] pnp 00:00: [mem 0x00100000-0x00ffffff] [ 1.235293] pnp 00:00: [mem 0x01000000-0x3ff73fff] [ 1.235296] pnp 00:00: [mem 0x000c0000-0x000fffff] [ 1.235299] pnp 00:00: [mem 0xfec00000-0xfec0ffff] [ 1.235303] pnp 00:00: [mem 0xfee00000-0xfee0ffff] [ 1.235306] pnp 00:00: [mem 0xfed20000-0xfed8ffff] [ 1.235309] pnp 00:00: [mem 0xfecf0000-0xfecf0fff] [ 1.235312] pnp 00:00: [mem 0xffb00000-0xffbfffff] [ 1.235315] pnp 00:00: [mem 0xffc00000-0xffffffff] [ 1.235374] PM: Adding info for pnp:00:00 [ 1.235390] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.242399] system 00:00: [mem 0x00100000-0x00ffffff] could not be reserved [ 1.249405] system 00:00: [mem 0x01000000-0x3ff73fff] could not be reserved [ 1.256407] system 00:00: [mem 0x000c0000-0x000fffff] could not be reserved [ 1.263409] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved [ 1.270410] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved [ 1.277066] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved [ 1.283721] system 00:00: [mem 0xfecf0000-0xfecf0fff] has been reserved [ 1.290376] system 00:00: [mem 0xffb00000-0xffbfffff] has been reserved [ 1.297031] system 00:00: [mem 0xffc00000-0xffffffff] has been reserved [ 1.303688] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.304241] pnp 00:01: [bus 00-ff] [ 1.304245] pnp 00:01: [io 0x0cf8-0x0cff] [ 1.304249] pnp 00:01: [io 0x0000-0x0cf7 window] [ 1.304252] pnp 00:01: [io 0x0d00-0xffff window] [ 1.304255] pnp 00:01: [mem 0x000a0000-0x000bffff window] [ 1.304259] pnp 00:01: [mem 0x80000000-0xfebfffff window] [ 1.304299] PM: Adding info for pnp:00:01 [ 1.304309] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 1.306113] pnp 00:02: [io 0x0080-0x009f] [ 1.306117] pnp 00:02: [io 0x0000-0x001f] [ 1.306120] pnp 00:02: [io 0x00c0-0x00df] [ 1.306124] pnp 00:02: [dma 4] [ 1.306150] PM: Adding info for pnp:00:02 [ 1.306160] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 1.306186] pnp 00:03: [io 0x00f0-0x00ff] [ 1.306199] pnp 00:03: [irq 13] [ 1.306226] PM: Adding info for pnp:00:03 [ 1.306236] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 1.306264] pnp 00:04: [io 0x0061] [ 1.306292] PM: Adding info for pnp:00:04 [ 1.306302] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 1.306328] pnp 00:05: [io 0x0070-0x007f] [ 1.306334] pnp 00:05: [irq 8] [ 1.306361] PM: Adding info for pnp:00:05 [ 1.306371] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 1.308437] pnp 00:06: [io 0x03f8-0x03ff] [ 1.308444] pnp 00:06: [irq 4] [ 1.308516] PM: Adding info for pnp:00:06 [ 1.308527] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 1.309300] pnp 00:07: [io 0x0378-0x037f] [ 1.309304] pnp 00:07: [io 0x0778-0x077f] [ 1.309310] pnp 00:07: [irq 7] [ 1.309313] pnp 00:07: [dma 0 disabled] [ 1.309442] PM: Adding info for pnp:00:07 [ 1.309452] pnp 00:07: Plug and Play ACPI device, IDs PNP0401 (active) [ 1.310369] pnp 00:08: [io 0x0060] [ 1.310372] pnp 00:08: [io 0x0064] [ 1.310375] pnp 00:08: [io 0x0062-0x0063] [ 1.310378] pnp 00:08: [io 0x0065-0x006f] [ 1.310381] pnp 00:08: [io 0x00e0-0x00ef] [ 1.310383] pnp 00:08: [io 0x0800-0x085f] [ 1.310386] pnp 00:08: [io 0x0c00-0x0c7f] [ 1.310389] pnp 00:08: [io 0x0860-0x08ff] [ 1.310446] PM: Adding info for pnp:00:08 [ 1.310460] system 00:08: [io 0x0800-0x085f] has been reserved [ 1.316424] system 00:08: [io 0x0c00-0x0c7f] has been reserved [ 1.322386] system 00:08: [io 0x0860-0x08ff] has been reserved [ 1.328348] system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active) [ 1.328561] pnp: PnP ACPI: found 9 devices [ 1.332700] ACPI: ACPI bus type pnp unregistered [ 1.337361] PnPBIOS: Disabled by ACPI PNP [ 1.341471] PM: Adding info for No Bus:mem [ 1.341502] PM: Adding info for No Bus:null [ 1.341534] PM: Adding info for No Bus:port [ 1.341560] PM: Adding info for No Bus:zero [ 1.341589] PM: Adding info for No Bus:full [ 1.341616] PM: Adding info for No Bus:random [ 1.341645] PM: Adding info for No Bus:urandom [ 1.341672] PM: Adding info for No Bus:kmsg [ 1.341701] PM: Adding info for No Bus:tty [ 1.341729] PM: Adding info for No Bus:console [ 1.341758] PM: Adding info for No Bus:tty0 [ 1.341796] PM: Adding info for No Bus:vcs [ 1.341822] PM: Adding info for No Bus:vcsa [ 1.341848] PM: Adding info for No Bus:vcs1 [ 1.341875] PM: Adding info for No Bus:vcsa1 [ 1.341907] PM: Adding info for No Bus:tty1 [ 1.341933] PM: Adding info for No Bus:tty2 [ 1.341966] PM: Adding info for No Bus:tty3 [ 1.341996] PM: Adding info for No Bus:tty4 [ 1.342022] PM: Adding info for No Bus:tty5 [ 1.342049] PM: Adding info for No Bus:tty6 [ 1.342084] PM: Adding info for No Bus:tty7 [ 1.342113] PM: Adding info for No Bus:tty8 [ 1.342139] PM: Adding info for No Bus:tty9 [ 1.342166] PM: Adding info for No Bus:tty10 [ 1.342196] PM: Adding info for No Bus:tty11 [ 1.342223] PM: Adding info for No Bus:tty12 [ 1.342250] PM: Adding info for No Bus:tty13 [ 1.342277] PM: Adding info for No Bus:tty14 [ 1.342307] PM: Adding info for No Bus:tty15 [ 1.342335] PM: Adding info for No Bus:tty16 [ 1.342362] PM: Adding info for No Bus:tty17 [ 1.342393] PM: Adding info for No Bus:tty18 [ 1.342420] PM: Adding info for No Bus:tty19 [ 1.342448] PM: Adding info for No Bus:tty20 [ 1.342483] PM: Adding info for No Bus:tty21 [ 1.342511] PM: Adding info for No Bus:tty22 [ 1.342543] PM: Adding info for No Bus:tty23 [ 1.342574] PM: Adding info for No Bus:tty24 [ 1.342605] PM: Adding info for No Bus:tty25 [ 1.342635] PM: Adding info for No Bus:tty26 [ 1.342664] PM: Adding info for No Bus:tty27 [ 1.342693] PM: Adding info for No Bus:tty28 [ 1.342722] PM: Adding info for No Bus:tty29 [ 1.342752] PM: Adding info for No Bus:tty30 [ 1.342781] PM: Adding info for No Bus:tty31 [ 1.342813] PM: Adding info for No Bus:tty32 [ 1.342844] PM: Adding info for No Bus:tty33 [ 1.342874] PM: Adding info for No Bus:tty34 [ 1.342903] PM: Adding info for No Bus:tty35 [ 1.342934] PM: Adding info for No Bus:tty36 [ 1.342964] PM: Adding info for No Bus:tty37 [ 1.342993] PM: Adding info for No Bus:tty38 [ 1.343033] PM: Adding info for No Bus:tty39 [ 1.343064] PM: Adding info for No Bus:tty40 [ 1.343094] PM: Adding info for No Bus:tty41 [ 1.343126] PM: Adding info for No Bus:tty42 [ 1.343156] PM: Adding info for No Bus:tty43 [ 1.343186] PM: Adding info for No Bus:tty44 [ 1.343216] PM: Adding info for No Bus:tty45 [ 1.343251] PM: Adding info for No Bus:tty46 [ 1.343281] PM: Adding info for No Bus:tty47 [ 1.343312] PM: Adding info for No Bus:tty48 [ 1.343357] PM: Adding info for No Bus:tty49 [ 1.343388] PM: Adding info for No Bus:tty50 [ 1.343421] PM: Adding info for No Bus:tty51 [ 1.343453] PM: Adding info for No Bus:tty52 [ 1.343486] PM: Adding info for No Bus:tty53 [ 1.343518] PM: Adding info for No Bus:tty54 [ 1.343553] PM: Adding info for No Bus:tty55 [ 1.343585] PM: Adding info for No Bus:tty56 [ 1.343624] PM: Adding info for No Bus:tty57 [ 1.343656] PM: Adding info for No Bus:tty58 [ 1.343690] PM: Adding info for No Bus:tty59 [ 1.343724] PM: Adding info for No Bus:tty60 [ 1.343756] PM: Adding info for No Bus:tty61 [ 1.343789] PM: Adding info for No Bus:tty62 [ 1.343823] PM: Adding info for No Bus:tty63 [ 1.378464] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.383736] pci 0000:00:01.0: bridge window [io disabled] [ 1.389440] pci 0000:00:01.0: bridge window [mem 0xfd000000-0xfeafffff] [ 1.396269] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff pref] [ 1.403545] pci 0000:00:1e.0: PCI bridge to [bus 02-02] [ 1.408811] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff] [ 1.414947] pci 0000:00:1e.0: bridge window [mem 0xfcf00000-0xfcffffff] [ 1.421777] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.427927] pci 0000:00:1e.0: setting latency timer to 64 [ 1.427932] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 1.427936] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff] [ 1.427939] pci_bus 0000:01: resource 1 [mem 0xfd000000-0xfeafffff] [ 1.427943] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff pref] [ 1.427947] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff] [ 1.427950] pci_bus 0000:02: resource 1 [mem 0xfcf00000-0xfcffffff] [ 1.427953] pci_bus 0000:02: resource 4 [io 0x0000-0xffff] [ 1.427956] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff] [ 1.428012] NET: Registered protocol family 2 [ 1.432513] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 1.440043] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.448026] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 1.454996] TCP: Hash tables configured (established 131072 bind 65536) [ 1.461666] TCP reno registered [ 1.464857] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 1.470829] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 1.477410] NET: Registered protocol family 1 [ 1.481939] pci 0000:01:00.0: Boot video device [ 1.481954] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling [ 1.489231] PCI: CLS 64 bytes, default 64 [ 1.489302] Trying to unpack rootfs image as initramfs... [ 1.686889] Freeing initrd memory: 5752k freed [ 1.695958] Simple Boot Flag value 0x87 read from CMOS RAM was invalid [ 1.702544] Simple Boot Flag at 0x7a set to 0x1 [ 1.707258] PM: Adding info for No Bus:mcelog [ 1.707332] PM: Adding info for No Bus:msr0 [ 1.707372] PM: Adding info for No Bus:msr1 [ 1.707413] PM: Adding info for No Bus:cpu0 [ 1.707444] PM: Adding info for No Bus:cpu1 [ 1.707469] PM: Adding info for platform:microcode [ 1.707486] microcode: CPU0 sig=0xf29, pf=0x4, revision=0x21 [ 1.713221] microcode: CPU1 sig=0xf29, pf=0x4, revision=0x21 [ 1.718940] PM: Adding info for No Bus:microcode [ 1.718952] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 1.727861] PM: Adding info for No Bus:snapshot [ 1.727919] audit: initializing netlink socket (disabled) [ 1.733372] type=2000 audit(1311318596.733:1): initialized [ 1.738956] PM: Adding info for event_source:cpu [ 1.738978] PM: Adding info for event_source:breakpoint [ 1.738996] PM: Adding info for event_source:tracepoint [ 1.739015] PM: Adding info for event_source:software [ 1.739211] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.749071] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 1.755159] NTFS driver 2.1.30 [Flags: R/W]. [ 1.759593] fuse init (API version 7.16) [ 1.763695] PM: Adding info for No Bus:fuse [ 1.763761] msgmni has been set to 2007 [ 1.767924] async_tx: api initialized (async) [ 1.772410] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.779900] io scheduler noop registered [ 1.783869] io scheduler deadline registered [ 1.788206] io scheduler cfq registered (default) [ 1.793042] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.798656] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.805300] PM: Adding info for No Bus:fbcon [ 1.805326] PM: Adding info for platform:vesafb.0 [ 1.805359] PM: Removing info for platform:vesafb.0 [ 1.805424] PM: Adding info for No Bus:input0 [ 1.805464] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.813706] ACPI: Power Button [VBTN] [ 1.817462] PM: Adding info for No Bus:input1 [ 1.817499] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.824947] ACPI: Power Button [PWRF] [ 1.828762] ACPI: acpi_idle registered with cpuidle [ 1.828816] PM: Adding info for No Bus:cooling_device0 [ 1.828858] PM: Adding info for No Bus:cooling_device1 [ 1.838952] ERST: Table is not found! [ 1.842679] PM: Adding info for No Bus:pnp1 [ 1.842683] isapnp: Scanning for PnP cards... [ 2.203558] isapnp: No Plug & Play device found [ 2.208203] PM: Adding info for No Bus:ptmx [ 2.208216] Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled [ 2.214542] PM: Adding info for platform:serial8250 [ 2.234980] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.241056] PM: Adding info for No Bus:ttyS0 [ 2.283383] PM: Adding info for No Bus:ttyS1 [ 2.336783] PM: Removing info for No Bus:ttyS0 [ 2.357256] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.362897] PM: Adding info for No Bus:ttyS0 [ 2.410117] PM: Adding info for No Bus:ttyprintk [ 2.410149] PM: Adding info for No Bus:hpet [ 2.410204] PM: Adding info for No Bus:nvram [ 2.410219] Non-volatile memory driver v1.3 [ 2.414447] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds). [ 2.423452] Hangcheck: Using getrawmonotonic(). [ 2.428050] PM: Adding info for No Bus:isa [ 2.428471] PM: Adding info for No Bus:1:0 [ 2.428520] PM: Adding info for No Bus:ram0 [ 2.428565] PM: Adding info for No Bus:1:1 [ 2.428600] PM: Adding info for No Bus:ram1 [ 2.428646] PM: Adding info for No Bus:1:2 [ 2.428681] PM: Adding info for No Bus:ram2 [ 2.428727] PM: Adding info for No Bus:1:3 [ 2.428762] PM: Adding info for No Bus:ram3 [ 2.428806] PM: Adding info for No Bus:1:4 [ 2.428844] PM: Adding info for No Bus:ram4 [ 2.428889] PM: Adding info for No Bus:1:5 [ 2.428924] PM: Adding info for No Bus:ram5 [ 2.428975] PM: Adding info for No Bus:1:6 [ 2.429011] PM: Adding info for No Bus:ram6 [ 2.429058] PM: Adding info for No Bus:1:7 [ 2.429099] PM: Adding info for No Bus:ram7 [ 2.429144] PM: Adding info for No Bus:1:8 [ 2.429184] PM: Adding info for No Bus:ram8 [ 2.429229] PM: Adding info for No Bus:1:9 [ 2.429266] PM: Adding info for No Bus:ram9 [ 2.429313] PM: Adding info for No Bus:1:10 [ 2.429355] PM: Adding info for No Bus:ram10 [ 2.429401] PM: Adding info for No Bus:1:11 [ 2.429440] PM: Adding info for No Bus:ram11 [ 2.429486] PM: Adding info for No Bus:1:12 [ 2.429524] PM: Adding info for No Bus:ram12 [ 2.429573] PM: Adding info for No Bus:1:13 [ 2.429610] PM: Adding info for No Bus:ram13 [ 2.429663] PM: Adding info for No Bus:1:14 [ 2.429701] PM: Adding info for No Bus:ram14 [ 2.429748] PM: Adding info for No Bus:1:15 [ 2.429786] PM: Adding info for No Bus:ram15 [ 2.429820] brd: module loaded [ 2.433128] PM: Adding info for No Bus:7:0 [ 2.433167] PM: Adding info for No Bus:loop0 [ 2.433214] PM: Adding info for No Bus:7:1 [ 2.433250] PM: Adding info for No Bus:loop1 [ 2.433294] PM: Adding info for No Bus:7:2 [ 2.433345] PM: Adding info for No Bus:loop2 [ 2.433390] PM: Adding info for No Bus:7:3 [ 2.433425] PM: Adding info for No Bus:loop3 [ 2.433472] PM: Adding info for No Bus:7:4 [ 2.433511] PM: Adding info for No Bus:loop4 [ 2.433558] PM: Adding info for No Bus:7:5 [ 2.433594] PM: Adding info for No Bus:loop5 [ 2.433639] PM: Adding info for No Bus:7:6 [ 2.433676] PM: Adding info for No Bus:loop6 [ 2.433722] PM: Adding info for No Bus:7:7 [ 2.433758] PM: Adding info for No Bus:loop7 [ 2.433794] loop: module loaded [ 2.437037] PM: Adding info for No Bus:pktcdvd [ 2.437128] ata_piix 0000:00:1f.1: version 2.13 [ 2.437150] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.444374] ata_piix 0000:00:1f.1: setting latency timer to 64 [ 2.444434] PM: Adding info for No Bus:ata1 [ 2.444449] PM: Adding info for No Bus:ata1 [ 2.444472] PM: Adding info for No Bus:link1 [ 2.444486] PM: Adding info for No Bus:link1 [ 2.444509] PM: Adding info for No Bus:dev1.0 [ 2.444526] PM: Adding info for No Bus:dev1.0 [ 2.444555] PM: Adding info for No Bus:dev1.1 [ 2.444570] PM: Adding info for No Bus:dev1.1 [ 2.444598] PM: Adding info for No Bus:ata2 [ 2.444613] PM: Adding info for No Bus:ata2 [ 2.444634] PM: Adding info for No Bus:link2 [ 2.444650] PM: Adding info for No Bus:link2 [ 2.444672] PM: Adding info for No Bus:dev2.0 [ 2.444687] PM: Adding info for No Bus:dev2.0 [ 2.444713] PM: Adding info for No Bus:dev2.1 [ 2.444728] PM: Adding info for No Bus:dev2.1 [ 2.444808] scsi0 : ata_piix [ 2.447781] PM: Adding info for scsi:host0 [ 2.447821] PM: Adding info for No Bus:host0 [ 2.447873] scsi1 : ata_piix [ 2.450810] PM: Adding info for scsi:host1 [ 2.450847] PM: Adding info for No Bus:host1 [ 2.450860] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 2.457864] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 2.464913] ata_piix 0000:00:1f.2: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.464995] scsi host1: rpm_resume flags 0x4 [ 2.464999] scsi host1: rpm_resume returns 1 [ 2.465132] scsi host0: rpm_resume flags 0x4 [ 2.465136] scsi host0: rpm_resume returns 1 [ 2.472102] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ] [ 2.477545] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 2.477592] PM: Adding info for No Bus:ata3 [ 2.477609] PM: Adding info for No Bus:ata3 [ 2.477633] PM: Adding info for No Bus:link3 [ 2.477648] PM: Adding info for No Bus:link3 [ 2.477671] PM: Adding info for No Bus:dev3.0 [ 2.477687] PM: Adding info for No Bus:dev3.0 [ 2.477716] PM: Adding info for No Bus:ata4 [ 2.477732] PM: Adding info for No Bus:ata4 [ 2.477753] PM: Adding info for No Bus:link4 [ 2.477769] PM: Adding info for No Bus:link4 [ 2.477791] PM: Adding info for No Bus:dev4.0 [ 2.477807] PM: Adding info for No Bus:dev4.0 [ 2.477873] scsi2 : ata_piix [ 2.480813] PM: Adding info for scsi:host2 [ 2.480858] PM: Adding info for No Bus:host2 [ 2.480912] scsi3 : ata_piix [ 2.483853] PM: Adding info for scsi:host3 [ 2.483893] PM: Adding info for No Bus:host3 [ 2.483904] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 18 [ 2.491081] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 18 [ 2.498309] scsi host2: rpm_resume flags 0x4 [ 2.498315] scsi host2: rpm_resume returns 1 [ 2.498346] scsi host3: rpm_resume flags 0x4 [ 2.498350] scsi host3: rpm_resume returns 1 [ 2.498425] VMware vmxnet3 virtual NIC driver - version 1.0.25.0-k-NAPI [ 2.505103] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.511236] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.516800] e100 0000:02:08.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 2.560015] e100 0000:02:08.0: PME# disabled [ 2.560084] PM: Adding info for No Bus:eth0 [ 2.560309] e100 0000:02:08.0: eth0: addr 0xfcfff000, irq 20, MAC addr 00:07:e9:47:08:38 [ 2.568558] PM: Adding info for No Bus:usbmon0 [ 2.568570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.575161] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 2.582347] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 2.582352] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 2.587654] PM: Adding info for No Bus:usbmon1 [ 2.587666] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 [ 2.610040] ehci_hcd 0000:00:1d.7: debug port 1 [ 2.618497] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported [ 2.618519] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xffa80800 [ 2.625369] ata1.00: HPA detected: current 156250000, native 156301488 [ 2.631959] ata1.00: ATA-5: WDC WD800BB-75CAA0, 16.06V16, max UDMA/100 [ 2.636693] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 2.636710] usb usb1: rpm_resume flags 0x0 [ 2.636714] usb usb1: rpm_resume returns 1 [ 2.636735] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.636740] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.636743] usb usb1: Product: EHCI Host Controller [ 2.636746] usb usb1: Manufacturer: Linux 2.6.39.3-i686 ehci_hcd [ 2.636749] usb usb1: SerialNumber: 0000:00:1d.7 [ 2.636866] PM: Adding info for usb:usb1 [ 2.636904] usb usb1: rpm_resume flags 0x4 [ 2.636907] usb usb1: rpm_resume returns 1 [ 2.636934] PM: Adding info for usb:1-0:1.0 [ 2.636957] usb usb1: rpm_resume flags 0x4 [ 2.636960] usb usb1: rpm_resume returns 1 [ 2.636964] hub 1-0:1.0: USB hub found [ 2.636971] hub 1-0:1.0: 8 ports detected [ 2.637032] PM: Adding info for No Bus:ep_81 [ 2.637059] PM: Adding info for No Bus:ep_00 [ 2.637064] usb usb1: rpm_suspend flags 0xc [ 2.637067] usb usb1: rpm_suspend returns -16 [ 2.637122] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.637146] uhci_hcd: USB Universal Host Controller Interface driver [ 2.637207] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.637220] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 2.637224] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 2.637293] PM: Adding info for No Bus:usbmon2 [ 2.637308] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.714287] ata1.00: 156250000 sectors, multi 8: LBA [ 2.719731] Refined TSC clocksource calibration: 2792.999 MHz. [ 2.719752] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8162B, 0015, max UDMA/33 [ 2.719765] ata2.01: ATAPI: TEAC DVD+RW DV-W58E, D.0N, max UDMA/33 [ 2.738480] Switching to clocksource tsc [ 2.740405] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80 [ 2.740445] usb usb2: rpm_resume flags 0x0 [ 2.740448] usb usb2: rpm_resume returns 1 [ 2.740471] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.740475] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.740478] usb usb2: Product: UHCI Host Controller [ 2.740481] usb usb2: Manufacturer: Linux 2.6.39.3-i686 uhci_hcd [ 2.740484] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.740594] PM: Adding info for usb:usb2 [ 2.740631] usb usb2: rpm_resume flags 0x4 [ 2.740634] usb usb2: rpm_resume returns 1 [ 2.740661] PM: Adding info for usb:2-0:1.0 [ 2.740686] usb usb2: rpm_resume flags 0x4 [ 2.740689] usb usb2: rpm_resume returns 1 [ 2.740693] hub 2-0:1.0: USB hub found [ 2.740700] hub 2-0:1.0: 2 ports detected [ 2.740734] PM: Adding info for No Bus:ep_81 [ 2.740757] PM: Adding info for No Bus:ep_00 [ 2.740762] usb usb2: rpm_suspend flags 0xc [ 2.740765] usb usb2: rpm_suspend returns -16 [ 2.740821] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.740833] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 2.740837] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 2.740902] PM: Adding info for No Bus:usbmon3 [ 2.740917] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 [ 2.805613] ata3.00: ATA-8: ST3500418AS, CC35, max UDMA/133 [ 2.811239] ata3.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.817995] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000ff60 [ 2.818149] ata4.00: ATA-8: ST3500418AS, CC38, max UDMA/133 [ 2.818154] ata4.00: 976773168 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 2.824673] ata1.00: configured for UDMA/100 [ 2.824690] scsi host0: rpm_suspend flags 0x0 [ 2.824694] scsi host0: rpm_suspend returns 0 [ 2.824709] scsi target0:0:0: rpm_resume flags 0x4 [ 2.824713] scsi target0:0:0: rpm_resume returns -11 [ 2.824716] scsi host0: rpm_resume flags 0x4 [ 2.824720] ata_piix 0000:00:1f.1: rpm_resume flags 0x0 [ 2.824723] ata_piix 0000:00:1f.1: rpm_resume returns 1 [ 2.824727] scsi host0: rpm_resume returns 0 [ 2.824881] scsi 0:0:0:0: Direct-Access ATA WDC WD800BB-75CA 16.0 PQ: 0 ANSI: 5 [ 2.824903] PM: Adding info for scsi:target0:0:0 [ 2.824920] scsi target0:0:0: rpm_resume flags 0x4 [ 2.824924] scsi target0:0:0: rpm_resume returns 1 [ 2.824927] scsi 0:0:0:0: rpm_resume flags 0x0 [ 2.824930] scsi 0:0:0:0: rpm_resume returns -11 [ 2.824934] scsi 0:0:0:0: rpm_resume flags 0x4 [ 2.824937] scsi 0:0:0:0: rpm_resume returns 1 [ 2.824967] PM: Adding info for scsi:0:0:0:0 [ 2.825028] PM: Adding info for No Bus:0:0:0:0 [ 2.825066] PM: Adding info for No Bus:0:0:0:0 [ 2.825160] PM: Adding info for No Bus:0:0:0:0 [ 2.825245] sd 0:0:0:0: [sda] 156250000 512-byte logical blocks: (80.0 GB/74.5 GiB) [ 2.825333] sd 0:0:0:0: [sda] Write Protect is off [ 2.825338] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.825378] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.825410] PM: Adding info for No Bus:8:0 [ 2.825478] PM: Adding info for No Bus:sda [ 2.825500] sd 0:0:0:0: rpm_resume flags 0x4 [ 2.825503] sd 0:0:0:0: rpm_resume returns 1 [ 2.830403] ata4.00: configured for UDMA/133 [ 2.830419] scsi host3: rpm_suspend flags 0x0 [ 2.830424] scsi host3: rpm_suspend returns 0 [ 2.874448] usb usb3: rpm_resume flags 0x0 [ 2.874453] usb usb3: rpm_resume returns 1 [ 2.874480] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.874616] ata2.00: configured for UDMA/33 [ 2.874789] hub 1-0:1.0: rpm_resume flags 0x4 [ 2.874793] hub 1-0:1.0: rpm_resume returns 1 [ 2.885602] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.885997] ata2.01: configured for UDMA/33 [ 2.897138] usb usb3: Product: UHCI Host Controller [ 2.897199] ata3.00: configured for UDMA/133 [ 2.897212] scsi host2: rpm_suspend flags 0x0 [ 2.897217] scsi host2: rpm_suspend returns 0 [ 2.906387] usb usb3: Manufacturer: Linux 2.6.39.3-i686 uhci_hcd [ 2.912477] usb usb3: SerialNumber: 0000:00:1d.1 [ 2.917277] PM: Adding info for usb:usb3 [ 2.917312] usb usb3: rpm_resume flags 0x4 [ 2.917316] usb usb3: rpm_resume returns 1 [ 2.917356] scsi host1: rpm_suspend flags 0x0 [ 2.917360] scsi target1:0:0: rpm_resume flags 0x4 [ 2.917364] scsi target1:0:0: rpm_resume returns -11 [ 2.917369] scsi host1: rpm_suspend returns -11 [ 2.917373] scsi host1: rpm_resume flags 0x4 [ 2.917378] scsi host1: rpm_resume returns 1 [ 2.917491] PM: Adding info for usb:3-0:1.0 [ 2.917511] usb usb3: rpm_resume flags 0x4 [ 2.917515] usb usb3: rpm_resume returns 1 [ 2.917518] hub 3-0:1.0: USB hub found [ 2.921315] hub 3-0:1.0: 2 ports detected [ 2.925391] PM: Adding info for No Bus:ep_81 [ 2.925415] PM: Adding info for No Bus:ep_00 [ 2.925419] usb usb3: rpm_suspend flags 0xc [ 2.925422] usb usb3: rpm_suspend returns -16 [ 2.925469] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.932694] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 > [ 2.932711] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 2.932720] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 2.932812] PM: Adding info for No Bus:usbmon4 [ 2.932831] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 2.936557] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8162B 0015 PQ: 0 ANSI: 5 [ 2.936586] PM: Adding info for scsi:target1:0:0 [ 2.936603] scsi target1:0:0: rpm_resume flags 0x4 [ 2.936607] scsi target1:0:0: rpm_resume returns 1 [ 2.936610] scsi 1:0:0:0: rpm_resume flags 0x0 [ 2.936613] scsi 1:0:0:0: rpm_resume returns -11 [ 2.936617] scsi 1:0:0:0: rpm_resume flags 0x4 [ 2.936620] scsi 1:0:0:0: rpm_resume returns 1 [ 2.936651] PM: Adding info for scsi:1:0:0:0 [ 2.936698] PM: Adding info for No Bus:1:0:0:0 [ 2.936759] PM: Adding info for No Bus:1:0:0:0 [ 2.936785] scsi target1:0:1: rpm_resume flags 0x4 [ 2.936789] scsi target1:0:1: rpm_resume returns -11 [ 2.936792] scsi host1: rpm_resume flags 0x4 [ 2.936795] scsi host1: rpm_resume returns 1 [ 2.938225] scsi 1:0:1:0: CD-ROM TEAC DVD+RW DV-W58E D.0N PQ: 0 ANSI: 5 [ 2.938252] PM: Adding info for scsi:target1:0:1 [ 2.938269] scsi target1:0:1: rpm_resume flags 0x4 [ 2.938273] scsi target1:0:1: rpm_resume returns 1 [ 2.938276] scsi 1:0:1:0: rpm_resume flags 0x0 [ 2.938279] scsi 1:0:1:0: rpm_resume returns -11 [ 2.938283] scsi 1:0:1:0: rpm_resume flags 0x4 [ 2.938286] scsi 1:0:1:0: rpm_resume returns 1 [ 2.938316] PM: Adding info for scsi:1:0:1:0 [ 2.938350] PM: Adding info for No Bus:1:0:1:0 [ 2.938406] PM: Adding info for No Bus:1:0:1:0 [ 2.938448] scsi target2:0:0: rpm_resume flags 0x4 [ 2.938452] scsi target2:0:0: rpm_resume returns -11 [ 2.938455] scsi host2: rpm_resume flags 0x4 [ 2.938459] ata_piix 0000:00:1f.2: rpm_resume flags 0x0 [ 2.938462] ata_piix 0000:00:1f.2: rpm_resume returns 1 [ 2.938466] scsi host2: rpm_resume returns 0 [ 2.938583] scsi 2:0:0:0: Direct-Access ATA ST3500418AS CC35 PQ: 0 ANSI: 5 [ 2.938603] PM: Adding info for scsi:target2:0:0 [ 2.938617] scsi target2:0:0: rpm_resume flags 0x4 [ 2.938620] scsi target2:0:0: rpm_resume returns 1 [ 2.938624] scsi 2:0:0:0: rpm_resume flags 0x0 [ 2.938627] scsi 2:0:0:0: rpm_resume returns -11 [ 2.938630] scsi 2:0:0:0: rpm_resume flags 0x4 [ 2.938633] scsi 2:0:0:0: rpm_resume returns 1 [ 2.938667] PM: Adding info for scsi:2:0:0:0 [ 2.938723] PM: Adding info for No Bus:2:0:0:0 [ 2.938759] PM: Adding info for No Bus:2:0:0:0 [ 2.938819] PM: Adding info for No Bus:2:0:0:0 [ 2.938864] scsi target3:0:0: rpm_resume flags 0x4 [ 2.938868] scsi target3:0:0: rpm_resume returns -11 [ 2.938871] scsi host3: rpm_resume flags 0x4 [ 2.938874] ata_piix 0000:00:1f.2: rpm_resume flags 0x0 [ 2.938878] ata_piix 0000:00:1f.2: rpm_resume returns 1 [ 2.938881] scsi host3: rpm_resume returns 0 [ 2.938998] scsi 3:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5 [ 2.939019] PM: Adding info for scsi:target3:0:0 [ 2.939033] scsi target3:0:0: rpm_resume flags 0x4 [ 2.939036] scsi target3:0:0: rpm_resume returns 1 [ 2.939039] scsi 3:0:0:0: rpm_resume flags 0x0 [ 2.939042] scsi 3:0:0:0: rpm_resume returns -11 [ 2.939046] scsi 3:0:0:0: rpm_resume flags 0x4 [ 2.939049] scsi 3:0:0:0: rpm_resume returns 1 [ 2.939082] PM: Adding info for scsi:3:0:0:0 [ 2.939136] PM: Adding info for No Bus:3:0:0:0 [ 2.939167] PM: Adding info for No Bus:3:0:0:0 [ 2.939223] PM: Adding info for No Bus:3:0:0:0 [ 2.939317] sd 3:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.939346] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.939493] sd 3:0:0:0: [sdc] Write Protect is off [ 2.939498] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.939519] sd 2:0:0:0: [sdb] Write Protect is off [ 2.939523] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.939576] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.939610] PM: Adding info for No Bus:8:32 [ 2.939682] PM: Adding info for No Bus:sdc [ 2.939706] sd 3:0:0:0: rpm_resume flags 0x4 [ 2.939710] sd 3:0:0:0: rpm_resume returns 1 [ 2.939742] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.939776] PM: Adding info for No Bus:8:16 [ 2.939834] PM: Adding info for No Bus:sdb [ 2.939849] sd 2:0:0:0: rpm_resume flags 0x4 [ 2.939853] sd 2:0:0:0: rpm_resume returns 1 [ 3.029062] PM: Adding info for No Bus:sda1 [ 3.029109] PM: Adding info for No Bus:sda2 [ 3.029149] PM: Adding info for No Bus:sda5 [ 3.029186] PM: Adding info for No Bus:sda6 [ 3.029223] PM: Adding info for No Bus:sda7 [ 3.029258] PM: Adding info for No Bus:sda8 [ 3.029293] PM: Adding info for No Bus:sda9 [ 3.029643] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.039254] sdc: sdc1 sdc2 < sdc5 sdc6 sdc7 sdc8 sdc9 sdc10 > [ 3.045190] PM: Adding info for No Bus:sdc1 [ 3.045227] PM: Adding info for No Bus:sdc2 [ 3.045265] PM: Adding info for No Bus:sdc5 [ 3.045300] PM: Adding info for No Bus:sdc6 [ 3.045338] PM: Adding info for No Bus:sdc7 [ 3.045374] PM: Adding info for No Bus:sdc8 [ 3.045414] PM: Adding info for No Bus:sdc9 [ 3.045450] PM: Adding info for No Bus:sdc10 [ 3.045750] sd 3:0:0:0: [sdc] Attached SCSI disk [ 3.050463] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 3.056287] usb usb4: rpm_resume flags 0x0 [ 3.056291] usb usb4: rpm_resume returns 1 [ 3.056310] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.056461] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 sdb11 sdb12 sdb13 > [ 3.056551] PM: Adding info for No Bus:sdb1 [ 3.056604] PM: Adding info for No Bus:sdb2 [ 3.056655] PM: Adding info for No Bus:sdb5 [ 3.056725] PM: Adding info for No Bus:sdb6 [ 3.056774] PM: Adding info for No Bus:sdb7 [ 3.056824] PM: Adding info for No Bus:sdb8 [ 3.056880] PM: Adding info for No Bus:sdb9 [ 3.056933] PM: Adding info for No Bus:sdb10 [ 3.056985] PM: Adding info for No Bus:sdb11 [ 3.057039] PM: Adding info for No Bus:sdb12 [ 3.057095] PM: Adding info for No Bus:sdb13 [ 3.070584] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.070991] sd 2:0:0:0: [sdb] Attached SCSI disk [ 3.080041] hub 1-0:1.0: rpm_resume flags 0x4 [ 3.080045] hub 1-0:1.0: rpm_resume returns 1 [ 3.080053] hub 1-0:1.0: rpm_suspend flags 0x4 [ 3.080060] hub 1-0:1.0: rpm_suspend returns 0 [ 3.080064] hub 2-0:1.0: rpm_resume flags 0x4 [ 3.080067] hub 2-0:1.0: rpm_resume returns 1 [ 3.080087] usb usb1: rpm_suspend flags 0x8 [ 3.080092] usb usb1: rpm_suspend returns 0 [ 3.082511] usb usb4: Product: UHCI Host Controller [ 3.087427] usb usb4: Manufacturer: Linux 2.6.39.3-i686 uhci_hcd [ 3.093473] usb usb4: SerialNumber: 0000:00:1d.2 [ 3.098228] PM: Adding info for usb:usb4 [ 3.098260] usb usb4: rpm_resume flags 0x4 [ 3.098263] usb usb4: rpm_resume returns 1 [ 3.098284] PM: Adding info for usb:4-0:1.0 [ 3.098303] usb usb4: rpm_resume flags 0x4 [ 3.098306] usb usb4: rpm_resume returns 1 [ 3.098309] hub 4-0:1.0: USB hub found [ 3.102102] hub 4-0:1.0: 2 ports detected [ 3.106181] PM: Adding info for No Bus:ep_81 [ 3.106200] PM: Adding info for No Bus:ep_00 [ 3.106204] usb usb4: rpm_suspend flags 0xc [ 3.106207] usb usb4: rpm_suspend returns -16 [ 3.106256] uhci_hcd 0000:00:1d.3: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3.113438] uhci_hcd 0000:00:1d.3: setting latency timer to 64 [ 3.113443] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 3.118753] PM: Adding info for No Bus:usbmon5 [ 3.118769] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 3.130033] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000ff20 [ 3.135842] usb usb5: rpm_resume flags 0x0 [ 3.135845] usb usb5: rpm_resume returns 1 [ 3.135863] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.142691] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.149961] usb usb5: Product: UHCI Host Controller [ 3.154878] usb usb5: Manufacturer: Linux 2.6.39.3-i686 uhci_hcd [ 3.160922] usb usb5: SerialNumber: 0000:00:1d.3 [ 3.165659] PM: Adding info for usb:usb5 [ 3.165687] usb usb5: rpm_resume flags 0x4 [ 3.165691] usb usb5: rpm_resume returns 1 [ 3.165710] PM: Adding info for usb:5-0:1.0 [ 3.165728] usb usb5: rpm_resume flags 0x4 [ 3.165731] usb usb5: rpm_resume returns 1 [ 3.165734] hub 5-0:1.0: USB hub found [ 3.169531] hub 5-0:1.0: 2 ports detected [ 3.173606] PM: Adding info for No Bus:ep_81 [ 3.173625] PM: Adding info for No Bus:ep_00 [ 3.173629] usb usb5: rpm_suspend flags 0xc [ 3.173632] usb usb5: rpm_suspend returns -16 [ 3.173704] usbcore: registered new interface driver usblp [ 3.179267] PM: Adding info for platform:dummy_hcd [ 3.179281] dummy_hcd dummy_hcd: USB Host+Gadget Emulator, driver 02 May 2005 [ 3.186455] dummy_hcd dummy_hcd: Dummy host controller [ 3.191670] PM: Adding info for No Bus:usbmon6 [ 3.191682] dummy_hcd dummy_hcd: new USB bus registered, assigned bus number 6 [ 3.213347] usb usb6: rpm_resume flags 0x0 [ 3.213351] usb usb6: rpm_resume returns 1 [ 3.213368] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.220194] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.227462] usb usb6: Product: Dummy host controller [ 3.232466] usb usb6: Manufacturer: Linux 2.6.39.3-i686 dummy_hcd [ 3.238599] usb usb6: SerialNumber: dummy_hcd [ 3.243067] PM: Adding info for usb:usb6 [ 3.243093] usb usb6: rpm_resume flags 0x4 [ 3.243096] usb usb6: rpm_resume returns 1 [ 3.243118] PM: Adding info for usb:6-0:1.0 [ 3.243135] usb usb6: rpm_resume flags 0x4 [ 3.243138] usb usb6: rpm_resume returns 1 [ 3.243142] hub 6-0:1.0: USB hub found [ 3.246933] hub 6-0:1.0: 1 port detected [ 3.250920] PM: Adding info for No Bus:ep_81 [ 3.250938] PM: Adding info for No Bus:ep_00 [ 3.250942] usb usb6: rpm_suspend flags 0xc [ 3.250945] usb usb6: rpm_suspend returns -16 [ 3.250961] PM: Adding info for platform:dummy_udc [ 3.250982] PM: Adding info for No Bus:gadget [ 3.251046] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.257938] PM: Adding info for platform:i8042 [ 3.261087] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.266099] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 3.271211] PM: Adding info for serio:serio0 [ 3.271297] PM: Adding info for No Bus:mice [ 3.271334] PM: Adding info for No Bus:psaux [ 3.271343] mousedev: PS/2 mouse device common for all mice [ 3.276979] PM: Adding info for serio:serio1 [ 3.277021] PM: Adding info for No Bus:event0 [ 3.277057] PM: Adding info for No Bus:event1 [ 3.277221] PM: Adding info for No Bus:uinput [ 3.277254] rtc_cmos 00:05: RTC can wake from S4 [ 3.286750] PM: Adding info for No Bus:rtc0 [ 3.286771] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 3.292925] rtc0: alarms up to one day, 242 bytes nvram, hpet irqs [ 3.299157] i2c /dev entries driver [ 3.302751] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 3.306692] usb 2-1: new full speed USB device number 2 using uhci_hcd [ 3.316701] PM: Adding info for i2c:i2c-0 [ 3.316739] PM: Adding info for No Bus:i2c-0 [ 3.316793] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 3.322429] PM: Adding info for platform:iTCO_wdt [ 3.322469] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860) [ 3.330117] PM: Adding info for No Bus:watchdog [ 3.330131] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 3.336178] md: linear personality registered for level -1 [ 3.341706] md: raid0 personality registered for level 0 [ 3.347074] md: raid1 personality registered for level 1 [ 3.352426] md: raid10 personality registered for level 10 [ 3.357950] md: raid6 personality registered for level 6 [ 3.363300] md: raid5 personality registered for level 5 [ 3.368652] md: raid4 personality registered for level 4 [ 3.374133] device-mapper: uevent: version 1.0.3 [ 3.378902] PM: Adding info for No Bus:device-mapper [ 3.378914] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx [ 3.387486] device-mapper: multipath: version 1.3.0 loaded [ 3.393012] device-mapper: multipath round-robin: version 1.0.0 loaded [ 3.399693] cpuidle: using governor ladder [ 3.403831] cpuidle: using governor menu [ 3.408313] usbcore: registered new interface driver usbhid [ 3.413923] usbhid: USB HID core driver [ 3.418220] TCP cubic registered [ 3.421700] NET: Registered protocol family 10 [ 3.427384] NET: Registered protocol family 17 [ 3.431930] Bridge firewalling registered [ 3.435980] Registering the dns_resolver key type [ 3.439348] usb 2-1: rpm_resume flags 0x0 [ 3.439352] usb 2-1: rpm_resume returns 1 [ 3.440753] Using IPI No-Shortcut mode [ 3.444606] PM: Adding info for No Bus:cpu_dma_latency [ 3.444649] PM: Adding info for No Bus:network_latency [ 3.444680] PM: Adding info for No Bus:network_throughput [ 3.444691] PM: Checking hibernation image partition /dev/sdb13 [ 3.444717] PM: Hibernation image partition 8:29 present [ 3.444719] PM: Looking for hibernation image. [ 3.444740] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.444743] sd 2:0:0:0: rpm_resume returns 1 [ 3.444979] PM: Image not found (code -22) [ 3.444983] PM: Hibernation image not present or could not be loaded. [ 3.445320] rtc_cmos 00:05: setting system clock to 2011-07-22 07:09:59 UTC (1311318599) [ 3.453473] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 3.459522] EDD information not available. [ 3.463780] Freeing unused kernel memory: 476k freed [ 3.495348] usb 2-1: New USB device found, idVendor=054c, idProduct=0155 [ 3.502150] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.506293] udev[66]: starting version 163 [ 3.513492] usb 2-1: Product: EyeToy USB camera Namtai [ 3.518721] usb 2-1: Manufacturer: Sony corporation [ 3.526907] PM: Adding info for usb:2-1 [ 3.526963] usb 2-1: rpm_resume flags 0x4 [ 3.526969] usb 2-1: rpm_resume returns 1 [ 3.528043] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.528049] sd 2:0:0:0: rpm_resume returns 1 [ 3.529386] PM: Adding info for usb:2-1:1.0 [ 3.529459] PM: Adding info for No Bus:ep_81 [ 3.529485] PM: Adding info for usb:2-1:1.1 [ 3.529545] PM: Adding info for usb:2-1:1.2 [ 3.529607] PM: Adding info for No Bus:ep_00 [ 3.529618] hub 3-0:1.0: rpm_resume flags 0x4 [ 3.529622] hub 3-0:1.0: rpm_resume returns 1 [ 3.539422] PM: Adding info for No Bus:vcs2 [ 3.539478] PM: Adding info for No Bus:vcsa2 [ 3.550915] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.550924] sd 3:0:0:0: rpm_resume returns 1 [ 3.555007] PM: Adding info for No Bus:vcs3 [ 3.555069] PM: Adding info for No Bus:vcsa3 [ 3.559276] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.559282] sd 0:0:0:0: rpm_resume returns 1 [ 3.568090] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.568097] sd 0:0:0:0: rpm_resume returns 1 [ 3.571826] PM: Adding info for No Bus:vcs4 [ 3.571882] PM: Adding info for No Bus:vcsa4 [ 3.581371] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.581379] sd 2:0:0:0: rpm_resume returns 1 [ 3.584035] PM: Adding info for No Bus:vcs5 [ 3.584092] PM: Adding info for No Bus:vcsa5 [ 3.591452] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.591460] sd 3:0:0:0: rpm_resume returns 1 [ 3.596125] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.596132] sd 0:0:0:0: rpm_resume returns 1 [ 3.597310] PM: Adding info for No Bus:vcs6 [ 3.597365] PM: Adding info for No Bus:vcsa6 [ 3.597954] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.597961] sd 3:0:0:0: rpm_resume returns 1 [ 3.617180] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.617186] sd 2:0:0:0: rpm_resume returns 1 [ 3.655671] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.655678] sd 0:0:0:0: rpm_resume returns 1 [ 3.673453] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.673459] sd 3:0:0:0: rpm_resume returns 1 [ 3.703056] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.703062] sd 2:0:0:0: rpm_resume returns 1 [ 3.729264] PM: Adding info for No Bus:vcs7 [ 3.729337] PM: Adding info for No Bus:vcsa7 [ 3.753411] usb 3-1: new low speed USB device number 2 using uhci_hcd [ 3.762296] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.762301] sd 3:0:0:0: rpm_resume returns 1 [ 3.764979] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.764986] sd 3:0:0:0: rpm_resume returns 1 [ 3.769461] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.769468] sd 3:0:0:0: rpm_resume returns 1 [ 3.781389] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.781397] sd 3:0:0:0: rpm_resume returns 1 [ 3.781689] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.781697] sd 3:0:0:0: rpm_resume returns 1 [ 3.782723] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.782729] sd 3:0:0:0: rpm_resume returns 1 [ 3.785273] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.785281] sd 3:0:0:0: rpm_resume returns 1 [ 3.792370] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.792378] sd 3:0:0:0: rpm_resume returns 1 [ 3.812892] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.812899] sd 0:0:0:0: rpm_resume returns 1 [ 3.814152] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.814159] sd 0:0:0:0: rpm_resume returns 1 [ 3.815161] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.815168] sd 0:0:0:0: rpm_resume returns 1 [ 3.816657] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.816665] sd 0:0:0:0: rpm_resume returns 1 [ 3.820886] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.820893] sd 2:0:0:0: rpm_resume returns 1 [ 3.823997] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.824004] sd 2:0:0:0: rpm_resume returns 1 [ 3.830098] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.830104] sd 2:0:0:0: rpm_resume returns 1 [ 3.832793] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.832803] sd 2:0:0:0: rpm_resume returns 1 [ 3.832856] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.832865] sd 2:0:0:0: rpm_resume returns 1 [ 3.833792] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.833801] sd 2:0:0:0: rpm_resume returns 1 [ 3.835308] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.835314] sd 0:0:0:0: rpm_resume returns 1 [ 3.835326] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.835333] sd 0:0:0:0: rpm_resume returns 1 [ 3.836851] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.836858] sd 2:0:0:0: rpm_resume returns 1 [ 3.838302] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.838310] sd 2:0:0:0: rpm_resume returns 1 [ 3.841464] sd 0:0:0:0: rpm_resume flags 0x4 [ 3.841471] sd 0:0:0:0: rpm_resume returns 1 [ 3.842220] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.842229] sd 2:0:0:0: rpm_resume returns 1 [ 3.845904] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.845910] sd 2:0:0:0: rpm_resume returns 1 [ 3.846331] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.846337] sd 2:0:0:0: rpm_resume returns 1 [ 3.858406] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.858412] sd 2:0:0:0: rpm_resume returns 1 [ 3.861578] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.861585] sd 3:0:0:0: rpm_resume returns 1 [ 3.877971] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.877978] sd 2:0:0:0: rpm_resume returns 1 [ 3.892284] usb 3-1: rpm_resume flags 0x0 [ 3.892289] usb 3-1: rpm_resume returns 1 [ 3.912382] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.912387] sd 3:0:0:0: rpm_resume returns 1 [ 3.928269] usb 3-1: New USB device found, idVendor=046d, idProduct=c517 [ 3.935157] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.942388] usb 3-1: Product: USB Receiver [ 3.945627] sd 2:0:0:0: rpm_resume flags 0x4 [ 3.945633] sd 2:0:0:0: rpm_resume returns 1 [ 3.946805] usb 3-1: Manufacturer: Logitech [ 3.951267] PM: Adding info for usb:3-1 [ 3.951489] usb 3-1: rpm_resume flags 0x4 [ 3.951495] usb 3-1: rpm_resume returns 1 [ 3.953788] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.953793] sd 3:0:0:0: rpm_resume returns 1 [ 3.954312] PM: Adding info for usb:3-1:1.0 [ 3.954353] usb 3-1: rpm_resume flags 0x4 [ 3.954359] usb 3-1: rpm_resume returns 1 [ 3.954409] PM: Adding info for hid:0003:046D:C517.0001 [ 3.962278] sd 3:0:0:0: rpm_resume flags 0x4 [ 3.962284] sd 3:0:0:0: rpm_resume returns 1 [ 3.968482] usbhid 3-1:1.0: rpm_resume flags 0x5 [ 3.968487] usbhid 3-1:1.0: rpm_resume returns 1 [ 3.976787] PM: Adding info for No Bus:input2 [ 3.976854] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input2 [ 3.987020] usbhid 3-1:1.0: rpm_resume flags 0x4 [ 3.987027] usbhid 3-1:1.0: rpm_resume returns 1 [ 3.987364] PM: Adding info for No Bus:event2 [ 3.987686] PM: Adding info for No Bus:hidraw0 [ 3.987722] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-1/input0 [ 3.999904] usbhid 3-1:1.0: rpm_suspend flags 0x4 [ 3.999911] usbhid 3-1:1.0: rpm_suspend returns 0 [ 3.999947] PM: Adding info for No Bus:ep_81 [ 4.000055] PM: Adding info for usb:3-1:1.1 [ 4.000176] usb 3-1: rpm_resume flags 0x4 [ 4.000180] usb 3-1: rpm_resume returns 1 [ 4.000219] PM: Adding info for hid:0003:046D:C517.0002 [ 4.029260] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor [ 4.037591] PM: Adding info for No Bus:9:4 [ 4.037681] PM: Adding info for No Bus:md4 [ 4.038128] sd 3:0:0:0: rpm_resume flags 0x4 [ 4.038134] sd 3:0:0:0: rpm_resume returns 1 [ 4.039039] PM: Adding info for No Bus:input3 [ 4.039049] md: bind<sdc9> [ 4.039243] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.1/input/input3 [ 4.039256] usbhid 3-1:1.1: rpm_resume flags 0x4 [ 4.039259] usbhid 3-1:1.1: rpm_resume returns 1 [ 4.039342] PM: Adding info for No Bus:mouse0 [ 4.039480] PM: Adding info for No Bus:event3 [ 4.040327] PM: Adding info for No Bus:hiddev0 [ 4.040630] PM: Adding info for No Bus:hidraw1 [ 4.040725] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-1/input1 [ 4.040738] usbhid 3-1:1.1: rpm_suspend flags 0x4 [ 4.040742] usbhid 3-1:1.1: rpm_suspend returns 0 [ 4.040772] PM: Adding info for No Bus:ep_82 [ 4.040804] PM: Adding info for No Bus:ep_00 [ 4.040810] hub 3-0:1.0: rpm_suspend flags 0x4 [ 4.040814] hub 3-0:1.0: rpm_suspend returns 0 [ 4.041882] hub 4-0:1.0: rpm_resume flags 0x4 [ 4.041887] hub 4-0:1.0: rpm_resume returns 1 [ 4.041891] hub 4-0:1.0: rpm_suspend flags 0x4 [ 4.041901] hub 4-0:1.0: rpm_suspend returns 0 [ 4.041909] usb usb4: rpm_suspend flags 0x8 [ 4.041915] usb usb4: rpm_suspend returns 0 [ 4.041921] hub 5-0:1.0: rpm_resume flags 0x4 [ 4.041924] hub 5-0:1.0: rpm_resume returns 1 [ 4.041928] hub 5-0:1.0: rpm_suspend flags 0x4 [ 4.041934] hub 5-0:1.0: rpm_suspend returns 0 [ 4.041939] usb usb5: rpm_suspend flags 0x8 [ 4.041943] usb usb5: rpm_suspend returns 0 [ 4.041948] hub 2-0:1.0: rpm_resume flags 0x4 [ 4.041951] hub 2-0:1.0: rpm_resume returns 1 [ 4.041967] hub 2-0:1.0: rpm_suspend flags 0x4 [ 4.041971] hub 2-0:1.0: rpm_suspend returns 0 [ 4.041975] hub 6-0:1.0: rpm_resume flags 0x4 [ 4.041977] hub 6-0:1.0: rpm_resume returns 1 [ 4.041981] hub 6-0:1.0: rpm_suspend flags 0x4 [ 4.041988] hub 6-0:1.0: rpm_suspend returns 0 [ 4.041993] usb usb6: rpm_suspend flags 0x8 [ 4.041997] usb usb6: rpm_suspend returns 0 [ 4.068524] sd 2:0:0:0: rpm_resume flags 0x4 [ 4.068531] sd 2:0:0:0: rpm_resume returns 1 [ 4.147903] PM: Adding info for No Bus:9:3 [ 4.148003] PM: Adding info for No Bus:md3 [ 4.148478] sd 2:0:0:0: rpm_resume flags 0x4 [ 4.148485] sd 2:0:0:0: rpm_resume returns 1 [ 4.177133] PM: Adding info for No Bus:9:2 [ 4.177241] PM: Adding info for No Bus:md2 [ 4.184082] PM: Adding info for No Bus:9:1 [ 4.184181] PM: Adding info for No Bus:md1 [ 4.470752] md: bind<sdb7> [ 4.473824] sd 3:0:0:0: rpm_resume flags 0x4 [ 4.473832] sd 3:0:0:0: rpm_resume returns 1 [ 4.474298] sd 3:0:0:0: rpm_resume flags 0x4 [ 4.474304] sd 3:0:0:0: rpm_resume returns 1 [ 4.476856] md: bind<sdc6> [ 4.481122] md: bind<sdc5> [ 4.485067] sd 2:0:0:0: rpm_resume flags 0x4 [ 4.485074] sd 2:0:0:0: rpm_resume returns 1 [ 4.558927] md: bind<sdb11> [ 4.564711] bio: create slab <bio-1> at 1 [ 4.568852] md/raid0:md4: looking at sdb11 [ 4.572960] md/raid0:md4: comparing sdb11(94371712) with sdb11(94371712) [ 4.579861] md/raid0:md4: END [ 4.583017] md/raid0:md4: ==> UNIQUE [ 4.586864] md/raid0:md4: 1 zones [ 4.590265] md/raid0:md4: looking at sdc9 [ 4.594286] md/raid0:md4: comparing sdc9(94367616) with sdb11(94371712) [ 4.601188] md/raid0:md4: NOT EQUAL [ 4.604950] md/raid0:md4: comparing sdc9(94367616) with sdc9(94367616) [ 4.611870] md/raid0:md4: END [ 4.615109] md/raid0:md4: ==> UNIQUE [ 4.618953] md/raid0:md4: 2 zones [ 4.622363] md/raid0:md4: FINAL 2 zones [ 4.626215] md/raid0:md4: zone 1 [ 4.629477] md/raid0:md4: checking sdb11 ... contained as device 0 [ 4.635673] md/raid0:md4: (94371712) is smallest!. [ 4.640644] md/raid0:md4: checking sdc9 ... nope. [ 4.645369] md/raid0:md4: zone->nb_dev: 1, sectors: 4096 [ 4.650695] md/raid0:md4: current zone start: 94371712 [ 4.655844] md/raid0:md4: done. [ 4.658997] md/raid0:md4: md_size is 188739328 sectors. [ 4.664317] ******* md4 configuration ********* [ 4.668939] zone0=[sdb11/sdc9/] [ 4.672196] zone offset=0kb device offset=0kb size=94367616kb [ 4.678646] zone1=[sdb11/] [ 4.681386] zone offset=94367616kb device offset=47183808kb size=2048kb [ 4.688711] ********************************** [ 4.688712] [ 4.694749] md4: detected capacity change from 0 to 96634535936 [ 4.702316] sd 3:0:0:0: rpm_resume flags 0x4 [ 4.702322] sd 3:0:0:0: rpm_resume returns 1 [ 4.702587] sd 2:0:0:0: rpm_resume flags 0x4 [ 4.702594] sd 2:0:0:0: rpm_resume returns 1 [ 4.707009] sd 2:0:0:0: rpm_resume flags 0x4 [ 4.707014] sd 2:0:0:0: rpm_resume returns 1 [ 4.713550] md: bind<sdc7> [ 4.728035] md: bind<sdb6> [ 4.733894] md/raid0:md2: looking at sdb6 [ 4.737929] md/raid0:md2: comparing sdb6(19534848) with sdb6(19534848) [ 4.744655] md/raid0:md2: END [ 4.747806] md/raid0:md2: ==> UNIQUE [ 4.751563] md/raid0:md2: 1 zones [ 4.754887] md/raid0:md2: looking at sdc6 [ 4.759016] md/raid0:md2: comparing sdc6(19534848) with sdb6(19534848) [ 4.765821] md/raid0:md2: EQUAL [ 4.769150] md/raid0:md2: FINAL 1 zones [ 4.773008] md/raid0:md2: done. [ 4.776172] md/raid0:md2: md_size is 39069696 sectors. [ 4.781321] ******* md2 configuration ********* [ 4.785859] zone0=[sdb6/sdc6/ [ 4.788356] md4: unknown partition table [ 4.792903] ] [ 4.794520] zone offset=0kb device offset=0kb size=19534848kb [ 4.800982] ********************************** [ 4.800985] [ 4.806975] md2: detected capacity change from 0 to 20003684352 [ 4.817924] md: bind<sdb5> [ 4.823529] md/raid0:md1: looking at sdb5 [ 4.827709] md/raid0:md1: comparing sdb5(29302272) with sdb5(29302272) [ 4.834479] md/raid0:md1: END [ 4.837664] md/raid0:md1: ==> UNIQUE [ 4.841441] md/raid0:md1: 1 zones [ 4.844785] md/raid0:md1: looking at sdc5 [ 4.848912] md/raid0:md1: comparing sdc5(29302272) with sdb5(29302272) [ 4.855827] md/raid0:md1: EQUAL [ 4.859246] md/raid0:md1: FINAL 1 zones [ 4.863189] md/raid0:md1: done. [ 4.866363] md/raid0:md1: md_size is 58604544 sectors. [ 4.871525] ******* md1 configuration ********* [ 4.876070] zone0=[sdb5/sdc5/] [ 4.879167] zone offset=0kb device offset=0kb size=29302272kb [ 4.885626] ********************************** [ 4.885630] [ 4.891622] md1: detected capacity change from 0 to 30005526528 [ 4.897919] md2: unknown partition table [ 4.898295] md/raid0:md3: looking at sdc7 [ 4.898300] md/raid0:md3: comparing sdc7(9767296) with sdc7(9767296) [ 4.898304] md/raid0:md3: END [ 4.898306] md/raid0:md3: ==> UNIQUE [ 4.898309] md/raid0:md3: 1 zones [ 4.898312] md/raid0:md3: looking at sdb7 [ 4.898315] md/raid0:md3: comparing sdb7(9767296) with sdc7(9767296) [ 4.898319] md/raid0:md3: EQUAL [ 4.898322] md/raid0:md3: FINAL 1 zones [ 4.898327] md/raid0:md3: done. [ 4.898330] md/raid0:md3: md_size is 19534592 sectors. [ 4.898333] ******* md3 configuration ********* [ 4.898336] zone0=[sdb7/sdc7/] [ 4.898342] zone offset=0kb device offset=0kb size=9767296kb [ 4.898344] ********************************** [ 4.898346] [ 4.898366] md3: detected capacity change from 0 to 10001711104 [ 5.015305] md1: unknown partition table [ 5.020268] md3: unknown partition table [ 5.161883] EXT4-fs (md1): mounted filesystem with ordered data mode. Opts: (null) [ 5.353345] usb usb1: rpm_suspend flags 0x9 [ 5.353352] usb usb1: rpm_suspend returns 0 [ 5.353364] usb usb1: rpm_suspend flags 0xa [ 5.353399] usb usb1: rpm_suspend returns 0 [ 6.353346] usb usb4: rpm_suspend flags 0x9 [ 6.353352] usb usb4: rpm_suspend returns 0 [ 6.353356] usb usb5: rpm_suspend flags 0x9 [ 6.353359] usb usb5: rpm_suspend returns 0 [ 6.353363] usb usb6: rpm_suspend flags 0x9 [ 6.353366] usb usb6: rpm_suspend returns 0 [ 6.353375] usb usb4: rpm_suspend flags 0xa [ 6.353397] usb usb4: rpm_suspend returns 0 [ 6.353401] usb usb5: rpm_suspend flags 0xa [ 6.353416] usb usb5: rpm_suspend returns 0 [ 6.353419] usb usb6: rpm_suspend flags 0xa [ 6.353427] usb usb6: rpm_suspend returns 0 [ 9.073532] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.073539] sd 2:0:0:0: rpm_resume returns 1 [ 9.084598] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.084607] sd 2:0:0:0: rpm_resume returns 1 [ 9.086370] Adding 2097148k swap on /dev/sdb13. Priority:1 extents:1 across:2097148k [ 9.113183] udev[357]: starting version 163 [ 9.259062] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.259069] sd 2:0:0:0: rpm_resume returns 1 [ 9.318971] intel_rng: Firmware space is locked read-only. If you can't or [ 9.318975] intel_rng: don't want to disable this in firmware setup, and if [ 9.318977] intel_rng: you are certain that your system has a functional [ 9.318980] intel_rng: RNG, try using the 'no_fwh_detect' option. [ 9.353196] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 9.406014] Linux media interface: v0.10 [ 9.410343] EDAC MC: Ver: 2.1.0 Jul 16 2011 [ 9.514267] Linux video capture interface: v2.00 [ 9.514702] EDAC i82875p: i82875p init one [ 9.517483] EDAC MC0: Giving out device to 'i82875p_edac' 'i82875p': DEV 0000:00:00.0 [ 9.517650] EDAC PCI0: Giving out device to module 'i82875p_edac' controller 'EDAC PCI controller': DEV '0000:00:00.0' (POLLED) [ 9.629029] sd 0:0:0:0: rpm_resume flags 0x4 [ 9.629037] sd 0:0:0:0: rpm_resume returns 1 [ 9.631977] gspca: v2.12.0 registered [ 9.687135] usb 2-1: rpm_resume flags 0x4 [ 9.687141] usb 2-1: rpm_resume returns 1 [ 9.687147] gspca: probing 054c:0155 [ 9.688318] sd 0:0:0:0: rpm_resume flags 0x4 [ 9.688325] sd 0:0:0:0: rpm_resume returns 1 [ 9.698030] sd 0:0:0:0: rpm_resume flags 0x4 [ 9.698037] sd 0:0:0:0: rpm_resume returns 1 [ 9.702313] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.702319] sd 2:0:0:0: rpm_resume returns 1 [ 9.707771] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.707777] sd 2:0:0:0: rpm_resume returns 1 [ 9.713018] sd 3:0:0:0: rpm_resume flags 0x4 [ 9.713025] sd 3:0:0:0: rpm_resume returns 1 [ 9.749157] sd 3:0:0:0: rpm_resume flags 0x4 [ 9.749163] sd 3:0:0:0: rpm_resume returns 1 [ 9.762712] sd 3:0:0:0: rpm_resume flags 0x4 [ 9.762719] sd 3:0:0:0: rpm_resume returns 1 [ 9.764152] sd 0:0:0:0: rpm_resume flags 0x4 [ 9.764160] sd 0:0:0:0: rpm_resume returns 1 [ 9.791604] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.791610] sd 2:0:0:0: rpm_resume returns 1 [ 9.805009] Linux agpgart interface v0.103 [ 9.819667] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.819674] sd 2:0:0:0: rpm_resume returns 1 [ 9.833434] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.833439] sd 2:0:0:0: rpm_resume returns 1 [ 9.833492] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.833496] sd 2:0:0:0: rpm_resume returns 1 [ 9.836651] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.836659] sd 2:0:0:0: rpm_resume returns 1 [ 9.845825] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.845832] sd 2:0:0:0: rpm_resume returns 1 [ 9.881278] sd 3:0:0:0: rpm_resume flags 0x4 [ 9.881286] sd 3:0:0:0: rpm_resume returns 1 [ 9.894535] EXT4-fs (md1): re-mounted. Opts: errors=remount-ro [ 9.942802] sd 2:0:0:0: rpm_resume flags 0x4 [ 9.942809] sd 2:0:0:0: rpm_resume returns 1 [ 9.947418] ov519: I2C synced in 0 attempt(s) [ 9.947424] ov519: starting OV7xx0 configuration [ 9.983452] ov519: Sensor is an OV7648 [ 10.068232] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.068238] sd 0:0:0:0: rpm_resume returns 1 [ 10.098374] PM: Adding info for No Bus:input4 [ 10.098449] input: ov519 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/input/input4 [ 10.098547] PM: Adding info for No Bus:event4 [ 10.098623] PM: Adding info for No Bus:video0 [ 10.098649] gspca: video0 created [ 10.098669] usb 2-1: rpm_resume flags 0x4 [ 10.098674] usb 2-1: rpm_resume returns 1 [ 10.098693] usb 2-1: rpm_resume flags 0x4 [ 10.098697] usb 2-1: rpm_resume returns 1 [ 10.098742] usbcore: registered new interface driver ov519 [ 10.169042] EXT4-fs (md3): mounted filesystem with ordered data mode. Opts: (null) [ 10.244420] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.244427] sd 0:0:0:0: rpm_resume returns 1 [ 10.335480] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.335487] sd 3:0:0:0: rpm_resume returns 1 [ 10.343196] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.343209] sd 2:0:0:0: rpm_resume returns 1 [ 10.361486] type=1400 audit(1311333006.411:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=563 comm="apparmor_parser" [ 10.361627] type=1400 audit(1311333006.411:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=563 comm="apparmor_parser" [ 10.361733] type=1400 audit(1311333006.411:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=563 comm="apparmor_parser" [ 10.431702] PM: Adding info for No Bus:timer [ 10.453091] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.453099] sd 0:0:0:0: rpm_resume returns 1 [ 10.455259] scsi host0: rpm_resume flags 0x4 [ 10.455267] scsi host0: rpm_resume returns 1 [ 10.470300] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.470306] sd 0:0:0:0: rpm_resume returns 1 [ 10.471624] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.471630] sd 0:0:0:0: rpm_resume returns 1 [ 10.472924] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.472931] sd 0:0:0:0: rpm_resume returns 1 [ 10.474271] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.474277] sd 0:0:0:0: rpm_resume returns 1 [ 10.475503] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.475510] sd 0:0:0:0: rpm_resume returns 1 [ 10.476801] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.476807] sd 0:0:0:0: rpm_resume returns 1 [ 10.479454] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.479460] sd 0:0:0:0: rpm_resume returns 1 [ 10.493386] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.493393] sd 3:0:0:0: rpm_resume returns 1 [ 10.499200] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.499206] sd 0:0:0:0: rpm_resume returns 1 [ 10.517993] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.518000] sd 3:0:0:0: rpm_resume returns 1 [ 10.518626] scsi host3: rpm_resume flags 0x4 [ 10.518631] scsi host3: rpm_resume returns 1 [ 10.532723] type=1400 audit(1311333006.581:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=646 comm="apparmor_parser" [ 10.532846] type=1400 audit(1311333006.581:6): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=646 comm="apparmor_parser" [ 10.532954] type=1400 audit(1311333006.581:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=646 comm="apparmor_parser" [ 10.544847] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.544855] sd 3:0:0:0: rpm_resume returns 1 [ 10.546598] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.546606] sd 3:0:0:0: rpm_resume returns 1 [ 10.549706] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.549720] sd 3:0:0:0: rpm_resume returns 1 [ 10.557843] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.557852] sd 3:0:0:0: rpm_resume returns 1 [ 10.583120] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.583128] sd 3:0:0:0: rpm_resume returns 1 [ 10.604292] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.604300] sd 3:0:0:0: rpm_resume returns 1 [ 10.612461] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.612466] sd 3:0:0:0: rpm_resume returns 1 [ 10.639734] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.639739] sd 3:0:0:0: rpm_resume returns 1 [ 10.644730] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.644735] sd 3:0:0:0: rpm_resume returns 1 [ 10.666554] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.666560] sd 2:0:0:0: rpm_resume returns 1 [ 10.692443] PM: Adding info for No Bus:seq [ 10.760351] sd 0:0:0:0: rpm_resume flags 0x4 [ 10.760359] sd 0:0:0:0: rpm_resume returns 1 [ 10.768801] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.768809] sd 2:0:0:0: rpm_resume returns 1 [ 10.852019] scsi host2: rpm_resume flags 0x4 [ 10.852031] scsi host2: rpm_resume returns 1 [ 10.852650] nvidia: module license 'NVIDIA' taints kernel. [ 10.905738] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.905744] sd 3:0:0:0: rpm_resume returns 1 [ 10.940721] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.940727] sd 2:0:0:0: rpm_resume returns 1 [ 10.943067] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.943074] sd 2:0:0:0: rpm_resume returns 1 [ 10.949447] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.949453] sd 2:0:0:0: rpm_resume returns 1 [ 10.971857] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.971864] sd 2:0:0:0: rpm_resume returns 1 [ 10.993081] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.993087] sd 2:0:0:0: rpm_resume returns 1 [ 10.997837] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.997843] sd 2:0:0:0: rpm_resume returns 1 [ 10.998186] sd 2:0:0:0: rpm_resume flags 0x4 [ 10.998191] sd 2:0:0:0: rpm_resume returns 1 [ 10.998557] sd 3:0:0:0: rpm_resume flags 0x4 [ 10.998563] sd 3:0:0:0: rpm_resume returns 1 [ 11.015268] sd 2:0:0:0: rpm_resume flags 0x4 [ 11.015275] sd 2:0:0:0: rpm_resume returns 1 [ 11.021439] sd 0:0:0:0: rpm_resume flags 0x4 [ 11.021445] sd 0:0:0:0: rpm_resume returns 1 [ 11.025066] sd 3:0:0:0: rpm_resume flags 0x4 [ 11.025072] sd 3:0:0:0: rpm_resume returns 1 [ 11.042038] sd 2:0:0:0: rpm_resume flags 0x4 [ 11.042044] sd 2:0:0:0: rpm_resume returns 1 [ 11.128155] sd 2:0:0:0: rpm_resume flags 0x4 [ 11.128161] sd 2:0:0:0: rpm_resume returns 1 [ 11.143515] sd 2:0:0:0: rpm_resume flags 0x4 [ 11.143522] sd 2:0:0:0: rpm_resume returns 1 [ 11.302650] usb 2-1: rpm_resume flags 0x4 [ 11.302656] usb 2-1: rpm_resume returns 1 [ 11.308055] PM: Adding info for No Bus:ep_82 [ 11.309022] PM: Removing info for No Bus:ep_82 [ 11.309075] PM: Adding info for No Bus:card1 [ 11.309302] PM: Adding info for No Bus:pcmC1D0c [ 11.309487] PM: Adding info for No Bus:controlC1 [ 11.309629] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 11.309635] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 11.311493] usbcore: registered new interface driver snd-usb-audio [ 11.331396] sd 0:0:0:0: rpm_resume flags 0x4 [ 11.331402] sd 0:0:0:0: rpm_resume returns 1 [ 11.415226] sd 0:0:0:0: rpm_resume flags 0x4 [ 11.415233] sd 0:0:0:0: rpm_resume returns 1 [ 11.433567] sd 0:0:0:0: rpm_resume flags 0x4 [ 11.433573] sd 0:0:0:0: rpm_resume returns 1 [ 11.464148] sd 2:0:0:0: rpm_resume flags 0x4 [ 11.464154] sd 2:0:0:0: rpm_resume returns 1 [ 11.508831] sd 0:0:0:0: rpm_resume flags 0x4 [ 11.508837] sd 0:0:0:0: rpm_resume returns 1 [ 11.658861] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 11.658876] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 11.659194] NVRM: loading NVIDIA UNIX x86 Kernel Module 173.14.30 Thu Apr 14 08:47:14 PDT 2011 [ 11.756126] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null) [ 11.801076] sd 2:0:0:0: rpm_resume flags 0x4 [ 11.801084] sd 2:0:0:0: rpm_resume returns 1 [ 11.837031] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.837080] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 12.081699] sd 2:0:0:0: rpm_resume flags 0x4 [ 12.081704] sd 2:0:0:0: rpm_resume returns 1 [ 12.128144] sd 2:0:0:0: rpm_resume flags 0x4 [ 12.128149] sd 2:0:0:0: rpm_resume returns 1 [ 12.176131] sd 2:0:0:0: rpm_resume flags 0x4 [ 12.176137] sd 2:0:0:0: rpm_resume returns 1 [ 12.209085] sd 2:0:0:0: rpm_resume flags 0x4 [ 12.209090] sd 2:0:0:0: rpm_resume returns 1 [ 12.256689] intel8x0_measure_ac97_clock: measured 51650 usecs (2489 samples) [ 12.256694] intel8x0: clocking to 48000 [ 12.256731] PM: Adding info for No Bus:card0 [ 12.256916] PM: Adding info for No Bus:pcmC0D4p [ 12.256997] PM: Adding info for No Bus:pcmC0D3c [ 12.257064] PM: Adding info for No Bus:pcmC0D2c [ 12.257137] PM: Adding info for No Bus:pcmC0D1c [ 12.257220] PM: Adding info for No Bus:pcmC0D0p [ 12.257302] PM: Adding info for No Bus:pcmC0D0c [ 12.257353] PM: Adding info for ac97:0-0:AD1980 [ 12.257419] PM: Adding info for No Bus:controlC0 [ 12.303070] sd 2:0:0:0: rpm_resume flags 0x4 [ 12.303081] sd 2:0:0:0: rpm_resume returns 1 [ 12.334090] EXT4-fs (md2): mounted filesystem with ordered data mode. Opts: (null) [ 12.609615] EXT4-fs (sdb10): mounted filesystem with ordered data mode. Opts: (null) [ 12.624222] sd 2:0:0:0: rpm_resume flags 0x4 [ 12.624227] sd 2:0:0:0: rpm_resume returns 1 [ 12.656366] EXT4-fs (md4): mounted filesystem with ordered data mode. Opts: (null) [ 12.884548] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.886846] e100 0000:02:08.0: eth0: NIC Link is Up 100 Mbps Full Duplex [ 12.903962] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 13.731510] type=1400 audit(1311333009.781:8): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1001 comm="apparmor_parser" [ 13.758148] type=1400 audit(1311333009.808:9): apparmor="STATUS" operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=974 comm="apparmor_parser" [ 13.758447] type=1400 audit(1311333009.808:10): apparmor="STATUS" operation="profile_load" name="/usr/sbin/cupsd" pid=974 comm="apparmor_parser" [ 13.828206] type=1400 audit(1311333009.878:11): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=1002 comm="apparmor_parser" [ 13.902262] PM: Adding info for i2c:i2c-1 [ 13.902340] PM: Adding info for No Bus:i2c-1 [ 13.902762] PM: Adding info for i2c:i2c-2 [ 13.902845] PM: Adding info for No Bus:i2c-2 [ 13.903243] PM: Adding info for i2c:i2c-3 [ 13.903324] PM: Adding info for No Bus:i2c-3 [ 18.435507] sd 0:0:0:0: rpm_resume flags 0x4 [ 18.435515] sd 0:0:0:0: rpm_resume returns 1 [ 18.455175] sd 2:0:0:0: rpm_resume flags 0x4 [ 18.455181] sd 2:0:0:0: rpm_resume returns 1 [ 18.481980] sd 3:0:0:0: rpm_resume flags 0x4 [ 18.481987] sd 3:0:0:0: rpm_resume returns 1 [ 18.793069] EXT4-fs (md1): re-mounted. Opts: errors=remount-ro,commit=0 [ 19.402736] EXT4-fs (md3): re-mounted. Opts: commit=0 [ 19.413552] EXT4-fs (sdb1): re-mounted. Opts: commit=0 [ 19.420227] EXT4-fs (md2): re-mounted. Opts: commit=0 [ 19.569355] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.569363] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.574467] EXT4-fs (sdb10): re-mounted. Opts: commit=0 [ 19.577047] PM: Adding info for No Bus:ep_82 [ 19.577685] PM: Removing info for No Bus:ep_82 [ 19.577733] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.577741] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.578762] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.578770] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.578954] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.578963] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.579753] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.579761] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.579908] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.579914] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.582065] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.582073] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.582293] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.582300] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.583042] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.583049] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.590518] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.590526] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.590862] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.590869] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.590985] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.590991] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.591260] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.591266] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.591376] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.591382] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.591676] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.591682] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.591853] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.591860] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.592154] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.592161] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.592823] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.592830] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.595875] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.595883] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.596031] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.596038] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.603862] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.603871] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.604027] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.604034] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.605092] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.605100] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.605296] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.605302] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.606451] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.606458] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.608603] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.608613] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.609874] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.609883] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.610650] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.610658] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.612247] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.612255] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.612408] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.612415] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.620353] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.620365] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.620625] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.620632] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.622085] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.622093] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.622815] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 19.622822] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 19.626622] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 19.626632] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 19.628700] PM: Adding info for No Bus:ep_82 [ 19.812516] EXT4-fs (md4): re-mounted. Opts: commit=0 [ 23.510025] eth0: no IPv6 routers present [ 25.198732] PM: Removing info for No Bus:ep_82 [ 25.198775] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 25.198782] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 26.270146] audit_printk_skb: 6 callbacks suppressed [ 26.270152] type=1400 audit(1311333022.321:14): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=1079 comm="apparmor_parser" [ 26.271348] type=1400 audit(1311333022.321:15): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=1079 comm="apparmor_parser" [ 26.272519] type=1400 audit(1311333022.321:16): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-thumbnailer" pid=1079 comm="apparmor_parser" [ 26.826331] type=1400 audit(1311333022.875:17): apparmor="STATUS" operation="profile_load" name="/usr/lib/libvirt/virt-aa-helper" pid=1083 comm="apparmor_parser" [ 26.928585] type=1400 audit(1311333022.978:18): apparmor="STATUS" operation="profile_replace" name="/usr/lib/cups/backend/cups-pdf" pid=1251 comm="apparmor_parser" [ 26.928872] type=1400 audit(1311333022.978:19): apparmor="STATUS" operation="profile_replace" name="/usr/sbin/cupsd" pid=1251 comm="apparmor_parser" [ 27.131414] type=1400 audit(1311333023.181:20): apparmor="STATUS" operation="profile_load" name="/usr/sbin/mysqld-akonadi" pid=1253 comm="apparmor_parser" [ 27.335196] type=1400 audit(1311333023.385:21): apparmor="STATUS" operation="profile_load" name="/usr/sbin/tcpdump" pid=1254 comm="apparmor_parser" [ 27.598969] type=1400 audit(1311333023.648:22): apparmor="STATUS" operation="profile_load" name="/usr/sbin/libvirtd" pid=1252 comm="apparmor_parser" [ 27.712297] microcode: CPU0 updated to revision 0x2e, date = 2004-08-11 [ 27.712899] microcode: CPU1 updated to revision 0x2e, date = 2004-08-11 [ 42.514801] PM: Adding info for No Bus:0:20 [ 42.845956] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.845963] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.846888] PM: Adding info for No Bus:ep_82 [ 42.847415] PM: Removing info for No Bus:ep_82 [ 42.847464] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.847472] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.848674] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.848683] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.849063] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.849071] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.850948] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.850957] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.851356] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.851365] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.852670] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.852678] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.853090] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.853099] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.854537] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.854545] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.855472] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.855482] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.855843] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.855851] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.856164] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.856172] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.856506] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.856513] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.857248] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.857257] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.857667] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.857675] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.858088] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.858096] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.858468] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.858476] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.859380] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.859388] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.861373] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.861384] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.861780] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.861788] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.863630] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.863639] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.864026] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.864036] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.865646] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.865655] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.866038] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.866046] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.868377] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.868386] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.869536] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.869545] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.871410] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.871418] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.871750] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.871759] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.873230] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.873237] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.873674] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.873684] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.875275] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.875291] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.875705] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.875714] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.877387] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.877395] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.878441] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 42.878449] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 42.881497] snd-usb-audio 2-1:1.1: rpm_resume flags 0x4 [ 42.881505] snd-usb-audio 2-1:1.1: rpm_resume returns 0 [ 42.883586] PM: Adding info for No Bus:ep_82 [ 43.439625] usbhid 3-1:1.0: rpm_resume flags 0x5 [ 43.439634] usbhid 3-1:1.0: rpm_resume returns 0 [ 43.442935] usbhid 3-1:1.0: rpm_suspend flags 0x5 [ 43.442942] usbhid 3-1:1.0: rpm_suspend returns 0 [ 48.261710] PM: Removing info for No Bus:ep_82 [ 48.261746] snd-usb-audio 2-1:1.1: rpm_suspend flags 0x4 [ 48.261751] snd-usb-audio 2-1:1.1: rpm_suspend returns 0 [ 73.969053] sd 0:0:0:0: rpm_resume flags 0x4 [ 73.969060] sd 0:0:0:0: rpm_resume returns 1 [ 73.974154] sd 2:0:0:0: rpm_resume flags 0x4 [ 73.974160] sd 2:0:0:0: rpm_resume returns 1 [ 73.986082] sd 3:0:0:0: rpm_resume flags 0x4 [ 73.986089] sd 3:0:0:0: rpm_resume returns 1 [ 95.568745] sd 2:0:0:0: rpm_resume flags 0x4 [ 95.568752] sd 2:0:0:0: rpm_resume returns 1 [ 95.617205] EXT4-fs (sdb9): warning: maximal mount count reached, running e2fsck is recommended [ 95.619447] EXT4-fs (sdb9): mounted filesystem with ordered data mode. Opts: (null) [ 1844.046396] sd 3:0:0:0: rpm_resume flags 0x4 [ 1844.046403] sd 3:0:0:0: rpm_resume returns 1 [ 1844.047624] sd 0:0:0:0: rpm_resume flags 0x4 [ 1844.047632] sd 0:0:0:0: rpm_resume returns 1 [ 1844.049060] sd 2:0:0:0: rpm_resume flags 0x4 [ 1844.049067] sd 2:0:0:0: rpm_resume returns 1 [ 3644.031675] sd 0:0:0:0: rpm_resume flags 0x4 [ 3644.031682] sd 0:0:0:0: rpm_resume returns 1 [ 3644.034184] sd 3:0:0:0: rpm_resume flags 0x4 [ 3644.034192] sd 3:0:0:0: rpm_resume returns 1 [ 3644.035693] sd 2:0:0:0: rpm_resume flags 0x4 [ 3644.035701] sd 2:0:0:0: rpm_resume returns 1 Info from /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.80GHz stepping : 9 cpu MHz : 2793.580 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pebs bts cid xtpr bogomips : 5589.95 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 32 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Pentium(R) 4 CPU 2.80GHz stepping : 9 cpu MHz : 2793.580 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 1 apicid : 1 initial apicid : 1 fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe pebs bts cid xtpr bogomips : 5587.31 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 32 bits virtual power management: Info /proc/interrupts: CPU0 CPU1 0: 84 0 IO-APIC-edge timer 1: 2 0 IO-APIC-edge i8042 4: 104 0 IO-APIC-edge 8: 1 0 IO-APIC-edge rtc0 9: 0 0 IO-APIC-fasteoi acpi 12: 4 0 IO-APIC-edge i8042 14: 428 0 IO-APIC-edge ata_piix 15: 16 0 IO-APIC-edge ata_piix 16: 525872 0 IO-APIC-fasteoi uhci_hcd:usb2, uhci_hcd:usb5, nvidia 17: 227 12275 IO-APIC-fasteoi Intel ICH5 18: 5412 31022 IO-APIC-fasteoi ata_piix, uhci_hcd:usb4 19: 57 17605 IO-APIC-fasteoi uhci_hcd:usb3 20: 9894 0 IO-APIC-fasteoi eth0 23: 3 0 IO-APIC-fasteoi ehci_hcd:usb1 NMI: 0 0 Non-maskable interrupts LOC: 817807 1037941 Local timer interrupts SPU: 0 0 Spurious interrupts PMI: 0 0 Performance monitoring interrupts IWI: 0 0 IRQ work interrupts RES: 1100881 1058033 Rescheduling interrupts CAL: 3328 3274 Function call interrupts TLB: 23337 18220 TLB shootdowns TRM: 0 0 Thermal event interrupts THR: 0 0 Threshold APIC interrupts MCE: 0 0 Machine check exceptions MCP: 16 16 Machine check polls ERR: 0 MIS: 0 Info from /proc/timers_list: Timer List Version: v0.6 HRTIMER_MAX_CLOCK_BASES: 3 now at 4551094137590 nsecs cpu: 0 clock 0: .base: ef002c84 .index: 0 .resolution: 1 nsecs .get_time: ktime_get_real .offset: 1311332996054684268 nsecs active timers: clock 1: .base: ef002cb0 .index: 1 .resolution: 1 nsecs .get_time: ktime_get .offset: 0 nsecs active timers: #0: <ef002d40>, tick_sched_timer, S:01 # expires at 4551096211557-4551096211557 nsecs [in 2073967 to 2073967 nsecs] #1: <e5f01b94>, hrtimer_wakeup, S:01 # expires at 4551101506798-4551101556798 nsecs [in 7369208 to 7419208 nsecs] #2: <d577beb8>, hrtimer_wakeup, S:01 # expires at 4551113306390-4551113356390 nsecs [in 19168800 to 19218800 nsecs] #3: <d5633b94>, hrtimer_wakeup, S:01 # expires at 4551115894172-4551115994170 nsecs [in 21756582 to 21856580 nsecs] #4: <e5f23b94>, hrtimer_wakeup, S:01 # expires at 4551123172772-4551123372771 nsecs [in 29035182 to 29235181 nsecs] #5: <edebdb94>, hrtimer_wakeup, S:01 # expires at 4551467318671-4551468919670 nsecs [in 373181081 to 374782080 nsecs] #6: <d85a5f60>, hrtimer_wakeup, S:01 # expires at 4551479385868-4551479435868 nsecs [in 385248278 to 385298278 nsecs] #7: <d87adb94>, hrtimer_wakeup, S:01 # expires at 4551489953808-4551490953807 nsecs [in 395816218 to 396816217 nsecs] #8: <edebfb94>, hrtimer_wakeup, S:01 # expires at 4551559991971-4551560490970 nsecs [in 465854381 to 466353380 nsecs] #9: <e51d5b1c>, hrtimer_wakeup, S:01 # expires at 4551590728146-4551591227143 nsecs [in 496590556 to 497089553 nsecs] #10: <d87afb94>, hrtimer_wakeup, S:01 # expires at 4551675876062-4551676872061 nsecs [in 581738472 to 582734471 nsecs] #11: <edef7b94>, hrtimer_wakeup, S:01 # expires at 4551866071158-4551868366156 nsecs [in 771933568 to 774228566 nsecs] #12: <e5d85b94>, hrtimer_wakeup, S:01 # expires at 4552865704837-4552872360835 nsecs [in 1771567247 to 1778223245 nsecs] #13: <ec79db94>, hrtimer_wakeup, S:01 # expires at 4553092642815-4553094642814 nsecs [in 1998505225 to 2000505224 nsecs] #14: <e5e81b1c>, hrtimer_wakeup, S:01 # expires at 4554486236554-4554496236553 nsecs [in 3392098964 to 3402098963 nsecs] #15: <eda19b94>, hrtimer_wakeup, S:01 # expires at 4554865923559-4554869697557 nsecs [in 3771785969 to 3775559967 nsecs] #16: <d5551b94>, hrtimer_wakeup, S:01 # expires at 4554865736544-4554874391542 nsecs [in 3771598954 to 3780253952 nsecs] #17: <eb6a9b94>, hrtimer_wakeup, S:01 # expires at 4552999618764-4555499618764 nsecs [in 1905481174 to 4405481174 nsecs] #18: <eb6abb94>, hrtimer_wakeup, S:01 # expires at 4557999612873-4557999612873 nsecs [in 6905475283 to 6905475283 nsecs] #19: <d56cfeb8>, hrtimer_wakeup, S:01 # expires at 4562785638395-4562785688395 nsecs [in 11691500805 to 11691550805 nsecs] #20: <d540fb94>, hrtimer_wakeup, S:01 # expires at 4563946781905-4563964519904 nsecs [in 12852644315 to 12870382314 nsecs] #21: <edf27f60>, hrtimer_wakeup, S:01 # expires at 4565064431181-4565064481181 nsecs [in 13970293591 to 13970343591 nsecs] #22: <eda25b94>, hrtimer_wakeup, S:01 # expires at 4571866310844-4571890864842 nsecs [in 20772173254 to 20796727252 nsecs] #23: <ec799b1c>, hrtimer_wakeup, S:01 # expires at 4590953964226-4591013964224 nsecs [in 39859826636 to 39919826634 nsecs] #24: <d549db94>, hrtimer_wakeup, S:01 # expires at 4597866323649-4597917974647 nsecs [in 46772186059 to 46823837057 nsecs] #25: <edeffb94>, hrtimer_wakeup, S:01 # expires at 4844865696222-4844965696222 nsecs [in 293771558632 to 293871558632 nsecs] #26: <e5eb1f60>, hrtimer_wakeup, S:01 # expires at 7227782069813-7227782119813 nsecs [in 2676687932223 to 2676687982223 nsecs] clock 2: .base: ef002cdc .index: 7 .resolution: 1 nsecs .get_time: ktime_get_boottime .offset: 0 nsecs active timers: .expires_next : 4551096211557 nsecs .hres_active : 1 .nr_events : 823531 .nr_retries : 663 .nr_hangs : 0 .max_hang_time : 0 nsecs .nohz_mode : 2 .idle_tick : 4551092878224 nsecs .tick_stopped : 0 .idle_jiffies : 1275327 .idle_calls : 1865391 .idle_sleeps : 1613239 .idle_entrytime : 4551092719226 nsecs .idle_waketime : 4551080517851 nsecs .idle_exittime : 4551092719226 nsecs .idle_sleeptime : 3527968796920 nsecs .iowait_sleeptime: 13982097290 nsecs .last_jiffies : 1275327 .next_jiffies : 1275371 .idle_expires : 4551236211543 nsecs jiffies: 1275328 cpu: 1 clock 0: .base: ef102c84 .index: 0 .resolution: 1 nsecs .get_time: ktime_get_real .offset: 1311332996054684268 nsecs active timers: clock 1: .base: ef102cb0 .index: 1 .resolution: 1 nsecs .get_time: ktime_get .offset: 0 nsecs active timers: #0: <ef102d40>, tick_sched_timer, S:01 # expires at 4551096211557-4551096211557 nsecs [in 2073967 to 2073967 nsecs] #1: <df84deb8>, hrtimer_wakeup, S:01 # expires at 4551099812342-4551099862342 nsecs [in 5674752 to 5724752 nsecs] #2: <e5eedb80>, hrtimer_wakeup, S:01 # expires at 4551196903883-4551196903883 nsecs [in 102766293 to 102766293 nsecs] #3: <d8609b94>, hrtimer_wakeup, S:01 # expires at 4551264581369-4551288946368 nsecs [in 170443779 to 194808778 nsecs] #4: <e5c97b94>, hrtimer_wakeup, S:01 # expires at 4551678301437-4551679301436 nsecs [in 584163847 to 585163846 nsecs] #5: <e512fb80>, hrtimer_wakeup, S:01 # expires at 4551977859864-4551982854261 nsecs [in 883722274 to 888716671 nsecs] #6: <b06b8054>, sched_rt_period_timer, S:01 # expires at 4552000000000-4552000000000 nsecs [in 905862410 to 905862410 nsecs] #7: <edf25f60>, hrtimer_wakeup, S:01 # expires at 4558945318490-4558945368490 nsecs [in 7851180900 to 7851230900 nsecs] #8: <e416bb94>, hrtimer_wakeup, S:01 # expires at 4560928692128-4561028692128 nsecs [in 9834554538 to 9934554538 nsecs] #9: <df81beb8>, hrtimer_wakeup, S:01 # expires at 4562125261331-4562125311331 nsecs [in 11031123741 to 11031173741 nsecs] #10: <e41f1b1c>, hrtimer_wakeup, S:01 # expires at 4575451717605-4575481717603 nsecs [in 24357580015 to 24387580013 nsecs] #11: <d865fb94>, hrtimer_wakeup, S:01 # expires at 4849012929504-4849112929504 nsecs [in 297918791914 to 298018791914 nsecs] #12: <e5fa1b94>, hrtimer_wakeup, S:01 # expires at 5443945795991-5444045795991 nsecs [in 892851658401 to 892951658401 nsecs] #13: <d868bb94>, hrtimer_wakeup, S:01 # expires at 7248865901250-7248965901250 nsecs [in 2697771763660 to 2697871763660 nsecs] clock 2: .base: ef102cdc .index: 7 .resolution: 1 nsecs .get_time: ktime_get_boottime .offset: 0 nsecs active timers: .expires_next : 4551096211557 nsecs .hres_active : 1 .nr_events : 1043757 .nr_retries : 2023 .nr_hangs : 0 .max_hang_time : 0 nsecs .nohz_mode : 2 .idle_tick : 4551092878224 nsecs .tick_stopped : 0 .idle_jiffies : 1275327 .idle_calls : 1716295 .idle_sleeps : 1516658 .idle_entrytime : 4551092900933 nsecs .idle_waketime : 4551090651128 nsecs .idle_exittime : 4551091266698 nsecs .idle_sleeptime : 3638641266855 nsecs .iowait_sleeptime: 32205960960 nsecs .last_jiffies : 1275328 .next_jiffies : 1275329 .idle_expires : 4551249544875 nsecs jiffies: 1275328 Tick Device: mode: 1 Broadcast device Clock Event Device: hpet max_delta_ns: 149983005959 min_delta_ns: 13409 mult: 61496114 shift: 32 mode: 3 next_event: 9223372036854775807 nsecs set_next_event: hpet_legacy_next_event set_mode: hpet_legacy_set_mode event_handler: tick_handle_oneshot_broadcast retries: 0 tick_broadcast_mask: 00000000 tick_broadcast_oneshot_mask: 00000000 Tick Device: mode: 1 Per CPU device: 0 Clock Event Device: lapic max_delta_ns: 172228809760 min_delta_ns: 1203 mult: 53553015 shift: 32 mode: 3 next_event: 4551096211557 nsecs set_next_event: lapic_next_event set_mode: lapic_timer_setup event_handler: hrtimer_interrupt retries: 1 Tick Device: mode: 1 Per CPU device: 1 Clock Event Device: lapic max_delta_ns: 172228809760 min_delta_ns: 1203 mult: 53553015 shift: 32 mode: 3 next_event: 4551096211557 nsecs set_next_event: lapic_next_event set_mode: lapic_timer_setup event_handler: hrtimer_interrupt retries: 0 Unfortunately, I do not know C, so I have no idea what to do next. Any help is greatly appreciated. Thank you. Towheed Mohammed _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
