[PATCH] mrst_pmu: driver for Intel Moorestown Power Management Unit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Len Brown <len.brown@xxxxxxxxx>

The Moorestown (MRST) Power Management Unit (PMU) driver
directs the SOC power states in the "Langwell" south complex (SCU).

It hooks pci_platform_pm_ops[] and thus observes all PCI ".set_state"
requests.  For devices in the SC, the pmu driver translates those
PCI requests into the appropriate commands for the SCU.

The PMU driver helps implement S0i3, a deep system idle power idle state.
Entry into S0i3 is via cpuidle, just like regular processor c-states.
S0i3 depends on pre-conditions including uni-processor, graphics off,
and certain IO devices in the SC must be off.  If those pre-conditions
are met, then the PMU allows cpuidle to enter S0i3, otherwise such requests
are demoted to Atom C6.

This driver is based on prototype work by Bruce Flemming,
Illyas Mansoor, Rajeev D. Muralidhar and Vishwesh M. Rudramuni.
It includes contributions from H. Peter Anvin, Arjan van de Ven,
Kristen Accardi, and Yong Wang.

Signed-off-by: Len Brown <len.brown@xxxxxxxxx>
---
 MAINTAINERS                     |    6 +
 arch/x86/platform/mrst/Makefile |    1 +
 arch/x86/platform/mrst/pmu.c    |  814 +++++++++++++++++++++++++++++++++++++++
 arch/x86/platform/mrst/pmu.h    |  234 +++++++++++
 4 files changed, 1055 insertions(+), 0 deletions(-)
 create mode 100644 arch/x86/platform/mrst/pmu.c
 create mode 100644 arch/x86/platform/mrst/pmu.h

diff --git a/MAINTAINERS b/MAINTAINERS
index 187282d..d37b387 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3344,6 +3344,12 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 F:	drivers/net/ixgbevf/
 
+INTEL MRST PMU DRIVER
+M:	Len Brown <len.brown@xxxxxxxxx>
+L:	linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
+S:	Supported
+F:	arch/x86/platform/mrst/pmu.*
+
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
 L:	linux-wireless@xxxxxxxxxxxxxxx
 S:	Orphan
diff --git a/arch/x86/platform/mrst/Makefile b/arch/x86/platform/mrst/Makefile
index f61ccdd..1ea3877 100644
--- a/arch/x86/platform/mrst/Makefile
+++ b/arch/x86/platform/mrst/Makefile
@@ -1,3 +1,4 @@
 obj-$(CONFIG_X86_MRST)		+= mrst.o
 obj-$(CONFIG_X86_MRST)		+= vrtc.o
 obj-$(CONFIG_EARLY_PRINTK_MRST)	+= early_printk_mrst.o
+obj-$(CONFIG_X86_MRST)		+= pmu.o
diff --git a/arch/x86/platform/mrst/pmu.c b/arch/x86/platform/mrst/pmu.c
new file mode 100644
index 0000000..3ca8447
--- /dev/null
+++ b/arch/x86/platform/mrst/pmu.c
@@ -0,0 +1,814 @@
+/*
+ * mrst/pmu.c - driver for MRST Power Management Unit
+ *
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/cpuidle.h>
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/seq_file.h>
+#include <linux/sfi.h>
+#include <asm/intel_scu_ipc.h>
+#include "pmu.h"
+
+#define IPCMSG_FW_REVISION	0xF4
+
+struct mrst_device {
+	u16 pci_dev_num;	/* DEBUG only */
+	u16 lss;
+	u16 latest_request;
+	unsigned int pci_state_counts[PCI_D3cold + 1]; /* DEBUG only */
+};
+
+/*
+ * comlete list of MRST PCI devices
+ */
+static struct mrst_device mrst_devs[] = {
+/*  0 */ { 0x0800, LSS_SPI0 },		/* Moorestown SPI Ctrl 0 */
+/*  1 */ { 0x0801, LSS_SPI1 },		/* Moorestown SPI Ctrl 1 */
+/*  2 */ { 0x0802, LSS_I2C0 },		/* Moorestown I2C 0 */
+/*  3 */ { 0x0803, LSS_I2C1 },		/* Moorestown I2C 1 */
+/*  4 */ { 0x0804, LSS_I2C2 },		/* Moorestown I2C 2 */
+/*  5 */ { 0x0805, LSS_KBD },		/* Moorestown Keyboard Ctrl */
+/*  6 */ { 0x0806, LSS_USB_HC },	/* Moorestown USB Ctrl */
+/*  7 */ { 0x0807, LSS_SD_HC0 },	/* Moorestown SD Host Ctrl 0 */
+/*  8 */ { 0x0808, LSS_SD_HC1 },	/* Moorestown SD Host Ctrl 1 */
+/*  9 */ { 0x0809, LSS_NAND },		/* Moorestown NAND Ctrl */
+/* 10 */ { 0x080a, LSS_AUDIO },		/* Moorestown Audio Ctrl */
+/* 11 */ { 0x080b, LSS_IMAGING },	/* Moorestown ISP */
+/* 12 */ { 0x080c, LSS_SECURITY },	/* Moorestown Security Controller */
+/* 13 */ { 0x080d, LSS_DISPLAY },	/* Moorestown External Displays */
+/* 14 */ { 0x080e, 0 },			/* Moorestown SCU IPC */
+/* 15 */ { 0x080f, LSS_GPIO },		/* Moorestown GPIO Controller */
+/* 16 */ { 0x0810, 0 },			/* Moorestown Power Management Unit */
+/* 17 */ { 0x0811, LSS_USB_OTG },	/* Moorestown OTG Ctrl */
+/* 18 */ { 0x0812, LSS_SPI2 },		/* Moorestown SPI Ctrl 2 */
+/* 19 */ { 0x0813, 0 },			/* Moorestown SC DMA */
+/* 20 */ { 0x0814, LSS_AUDIO_LPE },	/* Moorestown LPE DMA */
+/* 21 */ { 0x0815, LSS_AUDIO_SSP },	/* Moorestown SSP0 */
+
+/* 22 */ { 0x084F, LSS_SD_HC2 },	/* Moorestown SD Host Ctrl 2 */
+
+/* 23 */ { 0x4102, 0 },			/* Lincroft */
+/* 24 */ { 0x4110, 0 },			/* Lincroft */
+};
+
+/* n.b. We ignore PCI-id 0x815 in LSS9 b/c MeeGo has no driver for it */
+static u16 mrst_lss9_pci_ids[] = {0x080a, 0x0814, 0};
+static u16 mrst_lss10_pci_ids[] = {0x0800, 0x0801, 0x0802, 0x0803,
+					0x0804, 0x0805, 0x080f, 0};
+
+/* handle concurrent SMP invokations of pmu_pci_set_power_state() */
+static spinlock_t mrst_pmu_power_state_lock;
+
+static unsigned int wake_counters[MRST_NUM_LSS];	/* DEBUG only */
+static unsigned int pmu_irq_stats[INT_INVALID + 1];	/* DEBUG only */
+
+/*
+ * s0i3_pmu_command_pending flag needs no SMP locking because...
+ *
+ * checked in mrst_pmu_max_cstate(), MP mode
+ *
+ * set true in mrst_pmu_s0i3_prepare() in UP mode, IRQs off
+ * set false in mrst_s0i3() upon successful s0i3 exit in UP mode, IRQs off
+ * set false in pmu_irq() after S0i3 exit aborted, MP-mode, IRQ's enabled
+ */
+static bool s0i3_pmu_command_pending;
+
+static int graphics_is_off;
+static int lss_s0i3_enabled;
+static bool mrst_pmu_s0i3_enable;
+
+/*  debug counters */
+static u32 pmu_wait_ready_calls;
+static u32 pmu_wait_ready_udelays;
+static u32 pmu_wait_ready_udelays_max;
+static u32 pmu_wait_done_calls;
+static u32 pmu_wait_done_udelays;
+static u32 pmu_wait_done_udelays_max;
+static u32 pmu_set_power_state_entry;
+static u32 pmu_set_power_state_send_cmd;
+
+static struct mrst_device *pci_id_2_mrst_dev(u16 pci_dev_num)
+{
+	int index;
+
+	if ((pci_dev_num >= 0x0800) && (pci_dev_num <= 0x815))
+		index = pci_dev_num - 0x800;
+	else if (pci_dev_num == 0x084F)
+		index = 22;
+	else if (pci_dev_num == 0x4102)
+		index = 23;
+	else if (pci_dev_num == 0x4110)
+		index = 24;
+	else
+		BUG();
+
+	BUG_ON(pci_dev_num != mrst_devs[index].pci_dev_num);
+
+	return &mrst_devs[index];
+}
+
+/**
+ * mrst_pmu_validate_cstates
+ * @dev: cpuidle_device
+ *
+ * Certain states are not appropriate for governor to pick in some cases.
+ * This function will be called as cpuidle_device's prepare callback and
+ * thus tells governor to ignore such states when selecting the next state
+ * to enter.
+ */
+
+#define IDLE_STATE3_IS_C4	3
+#define IDLE_STATE4_IS_C6	4
+#define IDLE_STATE5_IS_S0I3	5
+
+int mrst_pmu_max_cstate(void)
+{
+	int cpu = smp_processor_id();
+
+	/*
+	 * If there is a pending PMU command, we cannot enter C6.
+	 */
+	if (s0i3_pmu_command_pending)
+		return IDLE_STATE3_IS_C4;
+
+	/*
+	 * Disallow S0i3 if: PMU is not initialized, or CPU1 is active,
+	 * or if device LSS is insufficient, or the GPU is active,
+	 * or if it has been explicitly disabled, or PMU is busy.
+	 */
+	if (!pmu_reg || !cpumask_equal(cpu_online_mask, cpumask_of(cpu)) ||
+	    !lss_s0i3_enabled || !graphics_is_off || !mrst_pmu_s0i3_enable ||
+	    pmu_read_busy_status())
+		return IDLE_STATE4_IS_C6;
+	else
+		return IDLE_STATE5_IS_S0I3;
+}
+
+void mrst_pmu_pending_set(int value)
+{
+	s0i3_pmu_command_pending = value;
+}
+
+void mrst_pmu_s0i3_prepare(void)
+{
+	/* Clear any possible error conditions */
+	pmu_write_ics(0x300);
+
+	/* set wake control to current D-states */
+	pmu_write_wssc(S0I3_SSS_TARGET);
+
+	/* Avoid entering conventional C6 until the PMU command has cleared */
+	mrst_pmu_pending_set(true);
+}
+
+/*
+ * pmu_update_wake_counters(): read PM_WKS, update wake_counters[]
+ * DEBUG only.
+ */
+static void pmu_update_wake_counters(void)
+{
+	int lss;
+	u32 wake_status;
+
+	wake_status = pmu_read_wks();
+
+	for (lss = 0; lss < MRST_NUM_LSS; ++lss) {
+		if (wake_status & (1 << lss))
+			wake_counters[lss]++;
+	}
+}
+
+int mrst_pmu_s0i3_entry(void)
+{
+	int status;
+
+	status = mrst_s0i3_entry(PM_S0I3_COMMAND, &pmu_reg->pm_cmd);
+	pmu_update_wake_counters();
+	return status;
+}
+
+/* poll for maximum of 5ms for busy bit to clear */
+static int pmu_wait_ready(void)
+{
+	int udelays;
+
+	pmu_wait_ready_calls++;
+
+	for (udelays = 0; udelays < 5000; ++udelays) {
+		if (udelays > pmu_wait_ready_udelays_max)
+			pmu_wait_ready_udelays_max = udelays;
+
+		if (pmu_read_busy_status() == 0)
+			return 0;
+
+		udelay(10);
+		pmu_wait_ready_udelays++;
+	}
+
+	/*
+	 * if this fires, observe
+	 * /sys/kernel/debug/mrst_pmu_wait_ready_calls
+	 * /sys/kernel/debug/mrst_pmu_wait_ready_udelays
+	 */
+	WARN_ONCE(1, "SCU not ready for 5ms");
+	return -EBUSY;
+}
+/* poll for maximum of 50ms us for busy bit to clear */
+static int pmu_wait_done(void)
+{
+	int udelays;
+
+	pmu_wait_done_calls++;
+
+	for (udelays = 0; udelays < 5000; ++udelays) {
+		if (udelays > pmu_wait_done_udelays_max)
+			pmu_wait_done_udelays_max = udelays;
+
+		if (pmu_read_busy_status() == 0)
+			return 0;
+
+		udelay(100);
+		pmu_wait_done_udelays++;
+	}
+
+	/*
+	 * if this fires, observe
+	 * /sys/kernel/debug/mrst_pmu_wait_done_calls
+	 * /sys/kernel/debug/mrst_pmu_wait_done_udelays
+	 */
+	WARN_ONCE(1, "SCU not done for 50ms");
+	return -EBUSY;
+}
+
+u32 mrst_pmu_msi_is_disabled(void)
+{
+	return pmu_msi_is_disabled();
+}
+
+void mrst_pmu_enable_msi(void)
+{
+	pmu_msi_enable();
+}
+
+/**
+ * pmu_irq - pmu driver interrupt handler
+ * Context: interrupt context
+ */
+static irqreturn_t pmu_irq(int irq, void *dummy)
+{
+	union pmu_pm_ics pmu_ics;
+
+	pmu_ics.value = pmu_read_ics();
+
+	if (!pmu_ics.bits.pending)
+		return IRQ_NONE;
+
+	switch (pmu_ics.bits.cause) {
+	case INT_SPURIOUS:
+	case INT_CMD_DONE:
+	case INT_CMD_ERR:
+	case INT_WAKE_RX:
+	case INT_SS_ERROR:
+	case INT_S0IX_MISS:
+	case INT_NO_ACKC6:
+		pmu_irq_stats[pmu_ics.bits.cause]++;
+		break;
+	default:
+		pmu_irq_stats[INT_INVALID]++;
+	}
+
+	mrst_pmu_pending_set(false);
+
+	pmu_write_ics(pmu_ics.value); /* Clear pending interrupt */
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Translate PCI power management to MRST LSS D-states
+ */
+static int pci_2_mrst_state(int lss, pci_power_t pci_state)
+{
+	switch (pci_state) {
+	case PCI_D0:
+		if (SSMSK(D0i1, lss) & D0I1_ACG_SSS_TARGET)
+			return D0i1;
+		else
+			return D0;
+	case PCI_D1:
+		return D0i1;
+	case PCI_D2:
+		return D0i2;
+	case PCI_D3hot:
+	case PCI_D3cold:
+		return D0i3;
+	default:
+		WARN(1, "pci_state %d\n", pci_state);
+		return 0;
+	}
+}
+
+static int pmu_issue_command(u32 pm_ssc)
+{
+	union pmu_pm_set_cfg_cmd_t command;
+
+	if (pmu_read_busy_status()) {
+		pr_debug("pmu is busy, Operation not permitted\n");
+		return -1;
+	}
+
+	/*
+	 * enable interrupts in PMU so that interrupts are
+	 * propagated when ioc bit for a particular set
+	 * command is set
+	 */
+
+	pmu_irq_enable();
+
+	/* Configure the sub systems for pmu2 */
+
+	pmu_write_ssc(pm_ssc);
+
+	/*
+	 * Send the set config command for pmu its configured
+	 * for mode CM_IMMEDIATE & hence with No Trigger
+	 */
+
+	command.pmu2_params.d_param.cfg_mode = CM_IMMEDIATE;
+	command.pmu2_params.d_param.cfg_delay = 0;
+	command.pmu2_params.d_param.rsvd = 0;
+
+	/* construct the command to send SET_CFG to particular PMU */
+	command.pmu2_params.d_param.cmd = SET_CFG_CMD;
+	command.pmu2_params.d_param.ioc = 0;
+	command.pmu2_params.d_param.mode_id = 0;
+	command.pmu2_params.d_param.sys_state = SYS_STATE_S0I0;
+
+	/* write the value of PM_CMD into particular PMU */
+	pr_debug("pmu command being written %x\n",
+			command.pmu_pm_set_cfg_cmd_value);
+
+	pmu_write_cmd(command.pmu_pm_set_cfg_cmd_value);
+
+	return 0;
+}
+
+static u16 pmu_min_lss_pci_req(u16 *ids, u16 pci_state)
+{
+	u16 existing_request;
+	int i;
+
+	for (i = 0; ids[i]; ++i) {
+		existing_request = pci_id_2_mrst_dev(ids[i])->latest_request;
+		if (existing_request < pci_state)
+			pci_state = existing_request;
+	}
+	return pci_state;
+}
+
+/**
+ * pmu_pci_set_power_state - Callback function is used by all the PCI devices
+ *			for a platform  specific device power on/shutdown.
+ */
+
+int pmu_pci_set_power_state(struct pci_dev *pdev, pci_power_t pci_state)
+{
+	u32 old_sss, new_sss;
+	int status = 0;
+	struct mrst_device *mrst_dev;
+
+	pmu_set_power_state_entry++;
+
+	BUG_ON(pdev->vendor != PCI_VENDOR_ID_INTEL);
+	BUG_ON(pci_state < PCI_D0 || pci_state > PCI_D3cold);
+
+	mrst_dev = pci_id_2_mrst_dev(pdev->device);
+	mrst_dev->pci_state_counts[pci_state]++;	/* count invocations */
+
+	/* PMU driver calls self as part of PCI initialization, ignore */
+	if (pdev->device == PCI_DEV_ID_MRST_PMU)
+		return 0;
+
+	BUG_ON(!pmu_reg); /* SW bug if called before initialized */
+
+	spin_lock(&mrst_pmu_power_state_lock);
+
+	if (pdev->d3_delay) {
+		dev_dbg(&pdev->dev, "d3_delay %d, should be 0\n",
+			pdev->d3_delay);
+		pdev->d3_delay = 0;
+	}
+	/*
+	 * If Lincroft graphics, simply remember state
+	 */
+	if ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY
+		&& !((pdev->class & PCI_SUB_CLASS_MASK) >> 8)) {
+		if (pci_state == PCI_D0)
+			graphics_is_off = 0;
+		else
+			graphics_is_off = 1;
+		goto ret;
+	}
+
+	if (!mrst_dev->lss)
+		goto ret;	/* device with no LSS */
+
+	if (mrst_dev->latest_request == pci_state)
+		goto ret;	/* no change */
+
+	mrst_dev->latest_request = pci_state;	/* record latest request */
+
+	/*
+	 * LSS9 and LSS10 contain multiple PCI devices.
+	 * Use the lowest numbered (highest power) state in the LSS
+	 */
+	if (mrst_dev->lss == 9)
+		pci_state = pmu_min_lss_pci_req(mrst_lss9_pci_ids, pci_state);
+	else if (mrst_dev->lss == 10)
+		pci_state = pmu_min_lss_pci_req(mrst_lss10_pci_ids, pci_state);
+
+	status = pmu_wait_ready();
+	if (status)
+		goto ret;
+
+	old_sss = pmu_read_sss();
+	new_sss = old_sss & ~SSMSK(3, mrst_dev->lss);
+	new_sss |= SSMSK(pci_2_mrst_state(mrst_dev->lss, pci_state),
+			mrst_dev->lss);
+
+	if (new_sss == old_sss)
+		goto ret;	/* nothing to do */
+
+	pmu_set_power_state_send_cmd++;
+
+	status = pmu_issue_command(new_sss);
+
+	if (unlikely(status != 0)) {
+		dev_err(&pdev->dev, "Failed to Issue a PM command\n");
+		goto ret;
+	}
+
+	if (pmu_wait_done())
+		goto ret;
+
+	lss_s0i3_enabled =
+	((pmu_read_sss() & S0I3_SSS_TARGET) == S0I3_SSS_TARGET);
+ret:
+	spin_unlock(&mrst_pmu_power_state_lock);
+	return status;
+}
+
+#ifdef CONFIG_DEBUG_FS
+static char *d0ix_names[] = {"D0", "D0i1", "D0i2", "D0i3"};
+
+static inline const char *d0ix_name(int state)
+{
+	return d0ix_names[(int) state];
+}
+
+static int debug_mrst_pmu_show(struct seq_file *s, void *unused)
+{
+	struct pci_dev *pdev = NULL;
+	u32 cur_pmsss;
+	int lss;
+
+	seq_printf(s, "0x%08X D0I1_ACG_SSS_TARGET\n", D0I1_ACG_SSS_TARGET);
+
+	cur_pmsss = pmu_read_sss();
+
+	seq_printf(s, "0x%08X S0I3_SSS_TARGET\n", S0I3_SSS_TARGET);
+
+	seq_printf(s, "0x%08X Current SSS ", cur_pmsss);
+	seq_printf(s, lss_s0i3_enabled ? "\n" : "[BLOCKS s0i3]\n");
+
+	if (cpumask_equal(cpu_online_mask, cpumask_of(0)))
+		seq_printf(s, "cpu0 is only cpu online\n");
+	else
+		seq_printf(s, "cpu0 is NOT only cpu online [BLOCKS S0i3]\n");
+
+	seq_printf(s, "GFX: %s\n", graphics_is_off ? "" : "[BLOCKS s0i3]");
+
+
+	for_each_pci_dev(pdev) {
+		int pos;
+		u16 pmcsr;
+		struct mrst_device *mrst_dev;
+		int i;
+
+		mrst_dev = pci_id_2_mrst_dev(pdev->device);
+
+		seq_printf(s, "%s %04x/%04X %-16.16s ",
+			dev_name(&pdev->dev),
+			pdev->vendor, pdev->device,
+			dev_driver_string(&pdev->dev));
+
+
+		if (mrst_dev->lss)
+			seq_printf(s, "LSS %2d %-4s ", mrst_dev->lss,
+				d0ix_name(((cur_pmsss >>
+					(mrst_dev->lss * 2)) & 0x3)));
+		else
+			seq_printf(s, "            ");
+
+		/* PCI PM config space setting */
+		pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
+		if (pos != 0) {
+			pci_read_config_word(pdev, pos + PCI_PM_CTRL, &pmcsr);
+		seq_printf(s, "PCI-%-4s",
+			pci_power_name(pmcsr & PCI_PM_CTRL_STATE_MASK));
+		} else {
+			seq_printf(s, "        ");
+		}
+
+		seq_printf(s, " %s ", pci_power_name(mrst_dev->latest_request));
+		for (i = 0; i <= PCI_D3cold; ++i)
+			seq_printf(s, "%d ", mrst_dev->pci_state_counts[i]);
+
+		if (mrst_dev->lss) {
+			unsigned int lssmask;
+
+			lssmask = SSMSK(D0i3, mrst_dev->lss);
+
+			if ((lssmask & S0I3_SSS_TARGET) &&
+				((lssmask & cur_pmsss) !=
+					(lssmask & S0I3_SSS_TARGET)))
+						seq_printf(s , "[BLOCKS s0i3]");
+		}
+
+		seq_printf(s, "\n");
+	}
+	seq_printf(s, "Wake Counters:\n");
+	for (lss = 0; lss < MRST_NUM_LSS; ++lss)
+		seq_printf(s, "LSS%d %d\n", lss, wake_counters[lss]);
+
+	seq_printf(s, "Interrupt Counters:\n");
+	seq_printf(s,
+		"INT_SPURIOUS \t%8u\n" "INT_CMD_DONE \t%8u\n"
+		"INT_CMD_ERR  \t%8u\n" "INT_WAKE_RX  \t%8u\n"
+		"INT_SS_ERROR \t%8u\n" "INT_S0IX_MISS\t%8u\n"
+		"INT_NO_ACKC6 \t%8u\n" "INT_INVALID  \t%8u\n",
+		pmu_irq_stats[INT_SPURIOUS], pmu_irq_stats[INT_CMD_DONE],
+		pmu_irq_stats[INT_CMD_ERR], pmu_irq_stats[INT_WAKE_RX],
+		pmu_irq_stats[INT_SS_ERROR], pmu_irq_stats[INT_S0IX_MISS],
+		pmu_irq_stats[INT_NO_ACKC6], pmu_irq_stats[INT_INVALID]);
+
+	seq_printf(s, "mrst_pmu_wait_ready_calls          %8d\n",
+			pmu_wait_ready_calls);
+	seq_printf(s, "mrst_pmu_wait_ready_udelays        %8d\n",
+			pmu_wait_ready_udelays);
+	seq_printf(s, "mrst_pmu_wait_ready_udelays_max    %8d\n",
+			pmu_wait_ready_udelays_max);
+	seq_printf(s, "mrst_pmu_wait_done_calls           %8d\n",
+			pmu_wait_done_calls);
+	seq_printf(s, "mrst_pmu_wait_done_udelays         %8d\n",
+			pmu_wait_done_udelays);
+	seq_printf(s, "mrst_pmu_wait_done_udelays_max     %8d\n",
+			pmu_wait_done_udelays_max);
+	seq_printf(s, "mrst_pmu_set_power_state_entry     %8d\n",
+			pmu_set_power_state_entry);
+	seq_printf(s, "mrst_pmu_set_power_state_send_cmd  %8d\n",
+			pmu_set_power_state_send_cmd);
+	seq_printf(s, "SCU busy: %d\n", pmu_read_busy_status());
+
+	return 0;
+}
+
+static int debug_mrst_pmu_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, debug_mrst_pmu_show, NULL);
+}
+
+static const struct file_operations devices_state_operations = {
+	.open		= debug_mrst_pmu_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+#endif	/* DEBUG_FS */
+
+/*
+ * Validate SCU PCI shim PCI vendor capability byte
+ * against LSS hard-coded in mrst_devs[] above.
+ * DEBUG only.
+ */
+static void pmu_scu_firmware_debug(void)
+{
+	struct pci_dev *pdev = NULL;
+
+	for_each_pci_dev(pdev) {
+		struct mrst_device *mrst_dev;
+		u8 pci_config_lss;
+		int pos;
+
+		mrst_dev = pci_id_2_mrst_dev(pdev->device);
+		if (mrst_dev->lss == 0)
+			continue;	 /* no LSS in our table */
+
+		pos = pci_find_capability(pdev, PCI_CAP_ID_VNDR);
+		if (!pos != 0) {
+			printk(KERN_ERR FW_BUG "pmu: 0x%04X "
+				"missing PCI Vendor Capability\n",
+				pdev->device);
+			continue;
+		}
+		pci_read_config_byte(pdev, pos + 4, &pci_config_lss);
+		if (!(pci_config_lss & PCI_VENDOR_CAP_LOG_SS_MASK)) {
+			printk(KERN_ERR FW_BUG "pmu: 0x%04X "
+				"invalid PCI Vendor Capability 0x%x "
+				" expected LSS 0x%X\n",
+				pdev->device, pci_config_lss, mrst_dev->lss);
+			continue;
+		}
+		pci_config_lss &= PCI_VENDOR_CAP_LOG_ID_MASK;
+
+		if (mrst_dev->lss == pci_config_lss)
+			continue;
+
+		printk(KERN_ERR FW_BUG "pmu: 0x%04X LSS = %d, expected %d\n",
+			pdev->device, pci_config_lss, mrst_dev->lss);
+	}
+}
+
+/**
+ * pmu_probe
+ */
+static int __devinit pmu_probe(struct pci_dev *pdev,
+				   const struct pci_device_id *pci_id)
+{
+	int ret;
+	struct mrst_pmu_reg *pmu;
+
+	/* Init the device */
+	ret = pci_enable_device(pdev);
+	if (ret) {
+		dev_err(&pdev->dev, "Unable to Enable PCI device\n");
+		return ret;
+	}
+
+	ret = pci_request_regions(pdev, MRST_PMU_DRV_NAME);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "Cannot obtain PCI resources, aborting\n");
+		goto out_err1;
+	}
+
+	/* Map the memory of PMU reg base */
+	pmu = pci_iomap(pdev, 0, 0);
+	if (!pmu) {
+		dev_err(&pdev->dev, "Unable to map the PMU address space\n");
+		ret = -ENOMEM;
+		goto out_err2;
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	/* /sys/kernel/debug/mrst_pmu */
+	(void) debugfs_create_file("mrst_pmu", S_IFREG | S_IRUGO,
+				NULL, NULL, &devices_state_operations);
+#endif
+	pmu_reg = pmu;	/* success */
+
+	if (request_irq(pdev->irq, pmu_irq, 0, MRST_PMU_DRV_NAME, NULL)) {
+		dev_err(&pdev->dev, "Registering isr has failed\n");
+		ret = -1;
+		goto out_err3;
+	}
+
+	pmu_scu_firmware_debug();
+
+	pmu_write_wkc(S0I3_WAKE_SOURCES);	/* Enable S0i3 wakeup sources */
+
+	pmu_wait_ready();
+
+	pmu_write_ssc(D0I1_ACG_SSS_TARGET);	/* Enable Auto-Clock_Gating */
+	pmu_write_cmd(0x201);
+
+	spin_lock_init(&mrst_pmu_power_state_lock);
+
+	/* Enable the hardware interrupt */
+	pmu_irq_enable();
+	return 0;
+
+out_err3:
+	free_irq(pdev->irq, NULL);
+	pci_iounmap(pdev, pmu_reg);
+	pmu_reg = NULL;
+out_err2:
+	pci_release_region(pdev, 0);
+out_err1:
+	pci_disable_device(pdev);
+	return ret;
+}
+
+static void __devexit pmu_remove(struct pci_dev *pdev)
+{
+	dev_err(&pdev->dev, "Mid PM pmu_remove called\n");
+
+	/* Freeing up the irq */
+	free_irq(pdev->irq, NULL);
+
+	pci_iounmap(pdev, pmu_reg);
+	pmu_reg = NULL;
+
+	/* disable the current PCI device */
+	pci_release_region(pdev, 0);
+	pci_disable_device(pdev);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(pmu_pci_ids) = {
+	{ PCI_VDEVICE(INTEL, PCI_DEV_ID_MRST_PMU), 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(pci, pmu_pci_ids);
+
+static struct pci_driver driver = {
+	.name = MRST_PMU_DRV_NAME,
+	.id_table = pmu_pci_ids,
+	.probe = pmu_probe,
+	.remove = __devexit_p(pmu_remove),
+};
+
+/**
+ * pmu_pci_register - register the PMU driver as PCI device
+ */
+static int __init pmu_pci_register(void)
+{
+	return pci_register_driver(&driver);
+}
+
+/* Register and probe via fs_initcall() to preceed device_initcall() */
+fs_initcall(pmu_pci_register);
+
+static void __exit mid_pci_cleanup(void)
+{
+	pci_unregister_driver(&driver);
+}
+
+static int ia_major;
+static int ia_minor;
+
+static int pmu_sfi_parse_oem(struct sfi_table_header *table)
+{
+	struct sfi_table_simple *sb;
+
+	sb = (struct sfi_table_simple *)table;
+	ia_major = (sb->pentry[1] >> 0) & 0xFFFF;
+	ia_minor = (sb->pentry[1] >> 16) & 0xFFFF;
+	printk(KERN_INFO "mrst_pmu: IA FW version v%x.%x\n",
+		ia_major, ia_minor);
+
+	return 0;
+}
+
+static int __init scu_fw_check(void)
+{
+	int ret;
+	u32 fw_version;
+
+	sfi_table_parse("OEMB", NULL, NULL, pmu_sfi_parse_oem);
+
+	if (ia_major < 0x6005 || ia_minor < 0x1525) {
+		WARN(1, "mrst_pmu: IA FW version too old\n");
+		return -1;
+	}
+
+	ret = intel_scu_ipc_command(IPCMSG_FW_REVISION, 0, NULL, 0,
+					&fw_version, 1);
+
+	if (ret) {
+		WARN(1, "mrst_pmu: IPC FW version? %d\n", ret);
+	} else {
+		int scu_major = (fw_version >> 8) & 0xFF;
+		int scu_minor = (fw_version >> 0) & 0xFF;
+
+		printk(KERN_INFO "mrst_pmu: firmware v%x\n", fw_version);
+
+		if ((scu_major >= 0xC0) && (scu_minor >= 0x49)) {
+			printk(KERN_INFO "mrst_pmu: enabling S0i3\n");
+			mrst_pmu_s0i3_enable = true;
+		} else {
+			WARN(1, "mrst_pmu: S0i3 disabled, old firmware %X.%X",
+					scu_major, scu_minor);
+		}
+	}
+	return 0;
+}
+late_initcall(scu_fw_check);
+module_exit(mid_pci_cleanup);
diff --git a/arch/x86/platform/mrst/pmu.h b/arch/x86/platform/mrst/pmu.h
new file mode 100644
index 0000000..bfbfe64
--- /dev/null
+++ b/arch/x86/platform/mrst/pmu.h
@@ -0,0 +1,234 @@
+/*
+ * mrst/pmu.h - private definitions for MRST Power Management Unit mrst/pmu.c
+ *
+ * Copyright (c) 2011, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef _MRST_PMU_H_
+#define _MRST_PMU_H_
+
+#define PCI_DEV_ID_MRST_PMU		0x0810
+#define MRST_PMU_DRV_NAME		"mrst_pmu"
+#define	PCI_SUB_CLASS_MASK		0xFF00
+
+#define	PCI_VENDOR_CAP_LOG_ID_MASK	0x7F
+#define PCI_VENDOR_CAP_LOG_SS_MASK	0x80
+
+#define SUB_SYS_ALL_D0I1	0x01155555
+#define S0I3_WAKE_SOURCES	0x00001FFF
+
+#define PM_S0I3_COMMAND					\
+	((0 << 31) |	/* Reserved */			\
+	(0 << 30) |	/* Core must be idle */		\
+	(0xc2 << 22) |	/* ACK C6 trigger */		\
+	(3 << 19) |	/* Trigger on DMI message */	\
+	(3 << 16) |	/* Enter S0i3 */		\
+	(0 << 13) |	/* Numeric mode ID (sw) */	\
+	(3 << 9) |	/* Trigger mode */		\
+	(0 << 8) |	/* Do not interrupt */		\
+	(1 << 0))	/* Set configuration */
+
+#define	LSS_DMI		0
+#define	LSS_SD_HC0	1
+#define	LSS_SD_HC1	2
+#define	LSS_NAND	3
+#define	LSS_IMAGING	4
+#define	LSS_SECURITY	5
+#define	LSS_DISPLAY	6
+#define	LSS_USB_HC	7
+#define	LSS_USB_OTG	8
+#define	LSS_AUDIO	9
+#define	LSS_AUDIO_LPE	9
+#define	LSS_AUDIO_SSP	9
+#define	LSS_I2C0	10
+#define	LSS_I2C1	10
+#define	LSS_I2C2	10
+#define	LSS_KBD		10
+#define	LSS_SPI0	10
+#define	LSS_SPI1	10
+#define	LSS_SPI2	10
+#define	LSS_GPIO	10
+#define	LSS_SRAM	11	/* used by SCU, do not touch */
+#define	LSS_SD_HC2	12
+/* LSS hardware bits 15,14,13 are hardwired to 0, thus unusable */
+#define MRST_NUM_LSS	13
+
+#define MIN(a, b) (((a) < (b)) ? (a) : (b))
+
+#define	SSMSK(mask, lss) ((mask) << ((lss) * 2))
+#define	D0	0
+#define	D0i1	1
+#define	D0i2	2
+#define	D0i3	3
+
+#define S0I3_SSS_TARGET	(		\
+	SSMSK(D0i1, LSS_DMI) |		\
+	SSMSK(D0i3, LSS_SD_HC0) |	\
+	SSMSK(D0i3, LSS_SD_HC1) |	\
+	SSMSK(D0i3, LSS_NAND) |		\
+	SSMSK(D0i3, LSS_SD_HC2) |	\
+	SSMSK(D0i3, LSS_IMAGING) |	\
+	SSMSK(D0i3, LSS_SECURITY) |	\
+	SSMSK(D0i3, LSS_DISPLAY) |	\
+	SSMSK(D0i3, LSS_USB_HC) |	\
+	SSMSK(D0i3, LSS_USB_OTG) |	\
+	SSMSK(D0i3, LSS_AUDIO) |	\
+	SSMSK(D0i1, LSS_I2C0))
+
+/*
+ * D0i1 on Langwell is Autonomous Clock Gating (ACG).
+ * Enable ACG on every LSS except camera and audio
+ */
+#define D0I1_ACG_SSS_TARGET	 \
+	(SUB_SYS_ALL_D0I1 & ~SSMSK(D0i1, LSS_IMAGING) & ~SSMSK(D0i1, LSS_AUDIO))
+
+enum cm_mode {
+	CM_NOP,			/* ignore the config mode value */
+	CM_IMMEDIATE,
+	CM_DELAY,
+	CM_TRIGGER,
+	CM_INVALID
+};
+
+enum sys_state {
+	SYS_STATE_S0I0,
+	SYS_STATE_S0I1,
+	SYS_STATE_S0I2,
+	SYS_STATE_S0I3,
+	SYS_STATE_S3,
+	SYS_STATE_S5
+};
+
+#define SET_CFG_CMD	1
+
+enum int_status {
+	INT_SPURIOUS = 0,
+	INT_CMD_DONE = 1,
+	INT_CMD_ERR = 2,
+	INT_WAKE_RX = 3,
+	INT_SS_ERROR = 4,
+	INT_S0IX_MISS = 5,
+	INT_NO_ACKC6 = 6,
+	INT_INVALID = 7,
+};
+
+/* PMU register interface */
+static struct mrst_pmu_reg {
+	u32 pm_sts;		/* 0x00 */
+	u32 pm_cmd;		/* 0x04 */
+	u32 pm_ics;		/* 0x08 */
+	u32 _resv1;		/* 0x0C */
+	u32 pm_wkc[2];		/* 0x10 */
+	u32 pm_wks[2];		/* 0x18 */
+	u32 pm_ssc[4];		/* 0x20 */
+	u32 pm_sss[4];		/* 0x30 */
+	u32 pm_wssc[4];		/* 0x40 */
+	u32 pm_c3c4;		/* 0x50 */
+	u32 pm_c5c6;		/* 0x54 */
+	u32 pm_msi_disable;	/* 0x58 */
+} *pmu_reg;
+
+static inline u32 pmu_read_sts(void) { return readl(&pmu_reg->pm_sts); }
+static inline u32 pmu_read_ics(void) { return readl(&pmu_reg->pm_ics); }
+static inline u32 pmu_read_wks(void) { return readl(&pmu_reg->pm_wks[0]); }
+static inline u32 pmu_read_sss(void) { return readl(&pmu_reg->pm_sss[0]); }
+
+static inline void pmu_write_cmd(u32 arg) { writel(arg, &pmu_reg->pm_cmd); }
+static inline void pmu_write_ics(u32 arg) { writel(arg, &pmu_reg->pm_ics); }
+static inline void pmu_write_wkc(u32 arg) { writel(arg, &pmu_reg->pm_wkc[0]); }
+static inline void pmu_write_ssc(u32 arg) { writel(arg, &pmu_reg->pm_ssc[0]); }
+static inline void pmu_write_wssc(u32 arg)
+					{ writel(arg, &pmu_reg->pm_wssc[0]); }
+
+static inline void pmu_msi_enable(void) { writel(0, &pmu_reg->pm_msi_disable); }
+static inline u32 pmu_msi_is_disabled(void)
+				{ return readl(&pmu_reg->pm_msi_disable); }
+
+union pmu_pm_ics {
+	struct {
+		u32 cause:8;
+		u32 enable:1;
+		u32 pending:1;
+		u32 reserved:22;
+	} bits;
+	u32 value;
+};
+
+static inline void pmu_irq_enable(void)
+{
+	union pmu_pm_ics pmu_ics;
+
+	pmu_ics.value = pmu_read_ics();
+	pmu_ics.bits.enable = 1;
+	pmu_write_ics(pmu_ics.value);
+}
+
+union pmu_pm_status {
+	struct {
+		u32 pmu_rev:8;
+		u32 pmu_busy:1;
+		u32 mode_id:4;
+		u32 Reserved:19;
+	} pmu_status_parts;
+	u32 pmu_status_value;
+};
+
+static inline int pmu_read_busy_status(void)
+{
+	union pmu_pm_status result;
+
+	result.pmu_status_value = pmu_read_sts();
+
+	return result.pmu_status_parts.pmu_busy;
+}
+
+/* pmu set config parameters */
+struct cfg_delay_param_t {
+	u32 cmd:8;
+	u32 ioc:1;
+	u32 cfg_mode:4;
+	u32 mode_id:3;
+	u32 sys_state:3;
+	u32 cfg_delay:8;
+	u32 rsvd:5;
+};
+
+struct cfg_trig_param_t {
+	u32 cmd:8;
+	u32 ioc:1;
+	u32 cfg_mode:4;
+	u32 mode_id:3;
+	u32 sys_state:3;
+	u32 cfg_trig_type:3;
+	u32 cfg_trig_val:8;
+	u32 cmbi:1;
+	u32 rsvd1:1;
+};
+
+union pmu_pm_set_cfg_cmd_t {
+	union {
+		struct cfg_delay_param_t d_param;
+		struct cfg_trig_param_t t_param;
+	} pmu2_params;
+	u32 pmu_pm_set_cfg_cmd_value;
+};
+
+#ifdef FUTURE_PATCH
+extern int mrst_s0i3_entry(u32 regval, u32 *regaddr);
+#else
+static inline int mrst_s0i3_entry(u32 regval, u32 *regaddr) { return -1; }
+#endif
+#endif
-- 
1.7.4.4

_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm


[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux