* Rafael J. Wysocki <rjw@xxxxxxx> [2011-07-01 00:07:27 +0200]: Hi Rafael, I have attached some files here to let you know what machine won't resume. Hope this helps, Marc > Hi, > > On Friday, July 01, 2011, Marc Koschewski wrote: > > Hi guys, > > > > I just thought to wait some what longer than -rc3 to report: suspend/resume is > > broken in the current git. I blacklisted the 'mei' module so the suspend worked > > as of rc4 (last 'first tested and working' version) with knowledge of the > > mei-bug. > > > > However, my system does not resume anymore on my T510. After suspend the 'moon' > > turns on as usual on 3.0.0-git and the box sleeps. After opening the lid it somehow > > wakes up but doesn't boot/resume. It just stalls after some HDD activity. > > > > If have no idea what it could be - and I unfortunately cannot bisect it down to > > anything > 2.6.39. I left out rc1 and rc2 this time due to having no time to > > experiment this month. However, my .config is attached if anyone needs it... > > Well, perhaps let us know the hardware configuration (attach dmesg?). > > Anyway, I'm not sure if there's anyone who can figure out what _may_ be wrong > on the basis of your description alone. It would be good if you could file > a bug in http://bugzilla.kernel.org and let me know its number. > > Thanks, > Rafael > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > > -- Marc Koschewski
[ 0.000000] Linux version 2.6.39-dezzy (marc@marc) (gcc version 4.6.0-pre9999 20110421 (prerelease) rev. 172845 (Gentoo SVN) ) #1 SMP PREEMPT Thu May 19 08:39:45 CEST 2011 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf27c000 (usable) [ 0.000000] BIOS-e820: 00000000bf27c000 - 00000000bf282000 (reserved) [ 0.000000] BIOS-e820: 00000000bf282000 - 00000000bf35f000 (usable) [ 0.000000] BIOS-e820: 00000000bf35f000 - 00000000bf371000 (reserved) [ 0.000000] BIOS-e820: 00000000bf371000 - 00000000bf3f2000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf3f2000 - 00000000bf40f000 (reserved) [ 0.000000] BIOS-e820: 00000000bf40f000 - 00000000bf46f000 (usable) [ 0.000000] BIOS-e820: 00000000bf46f000 - 00000000bf668000 (reserved) [ 0.000000] BIOS-e820: 00000000bf668000 - 00000000bf6e8000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf6e8000 - 00000000bf70f000 (reserved) [ 0.000000] BIOS-e820: 00000000bf70f000 - 00000000bf717000 (usable) [ 0.000000] BIOS-e820: 00000000bf717000 - 00000000bf71f000 (reserved) [ 0.000000] BIOS-e820: 00000000bf71f000 - 00000000bf76b000 (usable) [ 0.000000] BIOS-e820: 00000000bf76b000 - 00000000bf777000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf777000 - 00000000bf77a000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf77a000 - 00000000bf781000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf781000 - 00000000bf782000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf782000 - 00000000bf78b000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf78b000 - 00000000bf78c000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf78c000 - 00000000bf79f000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf79f000 - 00000000bf7ff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf7ff000 - 00000000bf800000 (usable) [ 0.000000] BIOS-e820: 00000000bf800000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000feaff000 - 00000000feb00000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 00000001fc000000 (usable) [ 0.000000] BIOS-e820: 0000000200000000 - 000000023c000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: LENOVO 43495KG/43495KG, BIOS 6MET83WW (1.43 ) 02/24/2011 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] last_pfn = 0x23c000 max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-D3FFF write-protect [ 0.000000] D4000-DBFFF uncachable [ 0.000000] DC000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 disabled [ 0.000000] 1 base 000000000 mask F80000000 write-back [ 0.000000] 2 base 080000000 mask FC0000000 write-back [ 0.000000] 3 base 100000000 mask F00000000 write-back [ 0.000000] 4 base 200000000 mask FC0000000 write-back [ 0.000000] 5 base 23C000000 mask FFC000000 uncachable [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000c0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] initial memory mapped : 0 - 01a00000 [ 0.000000] Base memory trampoline at [c0099000] 99000 size 16384 [ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037a00000 page 2M [ 0.000000] 0037a00000 - 0037bfe000 page 4k [ 0.000000] kernel direct mapping tables up to 37bfe000 @ 19fb000-1a00000 [ 0.000000] ACPI: RSDP 000f6870 00024 (v02 LENOVO) [ 0.000000] ACPI: XSDT bf7ef2e1 0009C (v01 LENOVO TP-6M 00001430 LTP 00000000) [ 0.000000] ACPI: FACP bf7ef400 000F4 (v04 LENOVO TP-6M 00001430 LNVO 00000001) [ 0.000000] ACPI: DSDT bf7ef7d1 0F34F (v01 LENOVO TP-6M 00001430 MSFT 03000001) [ 0.000000] ACPI: FACS bf6e7000 00040 [ 0.000000] ACPI: SSDT bf7ef5b4 0021D (v01 LENOVO TP-6M 00001430 MSFT 03000001) [ 0.000000] ACPI: ECDT bf7feb20 00052 (v01 LENOVO TP-6M 00001430 LNVO 00000001) [ 0.000000] ACPI: APIC bf7feb72 00084 (v01 LENOVO TP-6M 00001430 LNVO 00000001) [ 0.000000] ACPI: MCFG bf7fec2e 0003C (v01 LENOVO TP-6M 00001430 LNVO 00000001) [ 0.000000] ACPI: HPET bf7fec6a 00038 (v01 LENOVO TP-6M 00001430 LNVO 00000001) [ 0.000000] ACPI: ASF! bf7fedbe 000A4 (v16 LENOVO TP-6M 00001430 PTL 00000001) [ 0.000000] ACPI: SLIC bf7fee62 00176 (v01 LENOVO TP-6M 00001430 LTP 00000000) [ 0.000000] ACPI: BOOT bf7fefd8 00028 (v01 LENOVO TP-6M 00001430 LTP 00000001) [ 0.000000] ACPI: SSDT bf6e591a 0084B (v01 LENOVO TP-6M 00001430 INTL 20050513) [ 0.000000] ACPI: TCPA bf78b000 00032 (v02 PTL CRESTLN 06040000 00005A52) [ 0.000000] ACPI: DMAR bf781000 00080 (v01 INTEL CP_DALE 00000001 INTL 00000001) [ 0.000000] ACPI: SSDT bf779000 009F1 (v01 PmRef CpuPm 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT bf778000 00259 (v01 PmRef Cpu0Tst 00003000 INTL 20060912) [ 0.000000] ACPI: SSDT bf777000 0049F (v01 PmRef ApTst 00003000 INTL 20060912) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 8260MB HIGHMEM available. [ 0.000000] 891MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 37bfe000 [ 0.000000] low ram: 0 - 37bfe000 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x00037bfe [ 0.000000] HighMem 0x00037bfe -> 0x0023c000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[9] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x000bf27c [ 0.000000] 0: 0x000bf282 -> 0x000bf35f [ 0.000000] 0: 0x000bf40f -> 0x000bf46f [ 0.000000] 0: 0x000bf70f -> 0x000bf717 [ 0.000000] 0: 0x000bf71f -> 0x000bf76b [ 0.000000] 0: 0x000bf7ff -> 0x000bf800 [ 0.000000] 0: 0x00100000 -> 0x001fc000 [ 0.000000] 0: 0x00200000 -> 0x0023c000 [ 0.000000] On node 0 totalpages: 2061211 [ 0.000000] free_area_init_node: node 0, pgdat c14e92c0, node_mem_map f347d200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3949 pages, LIFO batch:0 [ 0.000000] Normal zone: 1752 pages used for memmap [ 0.000000] Normal zone: 222502 pages, LIFO batch:31 [ 0.000000] HighMem zone: 16521 pages used for memmap [ 0.000000] HighMem zone: 1816455 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000 [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000 [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000) [ 0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 12 pages/cpu @f3200000 s25984 r0 d23168 u524288 [ 0.000000] pcpu-alloc: s25984 r0 d23168 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2042906 [ 0.000000] Kernel command line: init=/sbin/init root=/dev/sda7 ro resume=/dev/sda8 resume2=swap:/dev/sda8 thinkpad_acpi.fan_control=1 thinkpad_acpi.experimental=1 thinkpad_acpi.volume_control=1 acpi_osi="Linux" console=tty1 libata.dma=3 libata.noacpi=0 nouveau.noaccel=1 threadirqs rootfstype=ext4 acpi_sleep=s3_bios [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (00037bfe:0023c000) [ 0.000000] Memory: 8164640k/9371648k available (3705k kernel code, 80204k reserved, 1353k data, 368k init, 7331904k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff67000 - 0xfffff000 ( 608 kB) [ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB) [ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB) [ 0.000000] .init : 0xc14f1000 - 0xc154d000 ( 368 kB) [ 0.000000] .data : 0xc139e538 - 0xc14f0ac0 (1353 kB) [ 0.000000] .text : 0xc1000000 - 0xc139e538 (3705 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:384 [ 0.000000] CPU 0 irqstacks, hard=f2c0c000 soft=f2c0e000 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty1] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 2660.254 MHz processor. [ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5320.50 BogoMIPS (lpj=2660254) [ 0.000247] pid_max: default: 32768 minimum: 301 [ 0.000399] Mount-cache hash table entries: 512 [ 0.000642] CPU: Physical Processor ID: 0 [ 0.000766] CPU: Processor Core ID: 0 [ 0.000889] mce: CPU supports 9 MCE banks [ 0.001016] CPU0: Thermal monitoring enabled (TM1) [ 0.001145] using mwait in idle threads. [ 0.001581] ACPI: Core revision 20110316 [ 0.013472] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.013991] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024095] CPU0: Intel(R) Core(TM) i7 CPU M 620 @ 2.67GHz stepping 05 [ 0.125103] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. [ 0.125402] ... version: 3 [ 0.125523] ... bit width: 48 [ 0.125644] ... generic registers: 4 [ 0.125764] ... value mask: 0000ffffffffffff [ 0.125886] ... max period: 000000007fffffff [ 0.126008] ... fixed-purpose events: 3 [ 0.126130] ... event mask: 000000070000000f [ 0.138085] CPU 1 irqstacks, hard=f2cce000 soft=f2cd0000 [ 0.138088] Booting Node 0, Processors #1 [ 0.138158] smpboot cpu 1: start_ip = 99000 [ 0.148836] Initializing CPU#1 [ 0.232850] CPU 2 irqstacks, hard=f2cda000 soft=f2cdc000 [ 0.232985] #2 [ 0.233015] smpboot cpu 2: start_ip = 99000 [ 0.243345] Initializing CPU#2 [ 0.327608] CPU 3 irqstacks, hard=f2cea000 soft=f2cec000 [ 0.327743] #3 Ok. [ 0.329885] smpboot cpu 3: start_ip = 99000 [ 0.340101] Initializing CPU#3 [ 0.420484] Brought up 4 CPUs [ 0.420726] Total of 4 processors activated (21279.62 BogoMIPS). [ 0.422526] PM: Registering ACPI NVS region at bf371000 (528384 bytes) [ 0.422667] PM: Registering ACPI NVS region at bf668000 (524288 bytes) [ 0.422801] PM: Registering ACPI NVS region at bf76b000 (49152 bytes) [ 0.422928] PM: Registering ACPI NVS region at bf77a000 (28672 bytes) [ 0.423053] PM: Registering ACPI NVS region at bf782000 (36864 bytes) [ 0.423178] PM: Registering ACPI NVS region at bf78c000 (77824 bytes) [ 0.423402] print_constraints: dummy: [ 0.423561] NET: Registered protocol family 16 [ 0.423854] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.424072] ACPI: bus type pci registered [ 0.424248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.424471] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.424596] PCI: Using MMCONFIG for extended config space [ 0.424719] PCI: Using configuration type 1 for base access [ 0.426502] bio: create slab <bio-0> at 0 [ 0.426690] ACPI: Added _OSI(Linux) [ 0.428009] ACPI: EC: EC description table is found, configuring boot EC [ 0.431716] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.519290] ACPI: SSDT bf71a598 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.519824] ACPI: Dynamic OEM Table Load: [ 0.520000] ACPI: SSDT (null) 004F3 (v01 PmRef Cpu0Ist 00003000 INTL 20060912) [ 0.520366] ACPI: SSDT bf718718 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.520907] ACPI: Dynamic OEM Table Load: [ 0.521082] ACPI: SSDT (null) 006B2 (v01 PmRef Cpu0Cst 00003001 INTL 20060912) [ 0.526329] ACPI: SSDT bf719a98 00303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.526898] ACPI: Dynamic OEM Table Load: [ 0.527079] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20060912) [ 0.530204] ACPI: SSDT bf717d98 00119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.530744] ACPI: Dynamic OEM Table Load: [ 0.530921] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20060912) [ 0.535547] ACPI: Interpreter enabled [ 0.535673] ACPI: (supports S0 S3 S4 S5) [ 0.535913] ACPI: Using IOAPIC for interrupt routing [ 0.541026] ACPI: Power Resource [PUBS] (on) [ 0.544662] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 [ 0.552848] ACPI: ACPI Dock Station Driver: 2 docks/bays found [ 0.552976] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.553204] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff]) [ 0.553362] pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600 [ 0.553384] pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600 [ 0.553404] pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600 [ 0.553421] pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600 [ 0.553439] pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600 [ 0.553456] pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600 [ 0.553480] pci_bus 0000:ff: on NUMA node 0 [ 0.553486] pci0000:ff: Requesting ACPI _OSC control (0x1d) [ 0.553613] Unable to assume _OSC PCIe control. Disabling ASPM [ 0.553982] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.554153] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.554283] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.554409] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.554623] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] [ 0.554835] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] [ 0.555054] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff] [ 0.555267] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff] [ 0.555488] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 [ 0.555517] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 [ 0.555538] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.555540] pci 0000:00:01.0: PME# disabled [ 0.555584] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 [ 0.555610] pci 0000:00:16.0: reg 10: [mem 0xf2427800-0xf242780f 64bit] [ 0.555683] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.555688] pci 0000:00:16.0: PME# disabled [ 0.555726] pci 0000:00:19.0: [8086:10ea] type 0 class 0x000200 [ 0.555750] pci 0000:00:19.0: reg 10: [mem 0xf2400000-0xf241ffff] [ 0.555761] pci 0000:00:19.0: reg 14: [mem 0xf2425000-0xf2425fff] [ 0.555772] pci 0000:00:19.0: reg 18: [io 0x1820-0x183f] [ 0.555839] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.555843] pci 0000:00:19.0: PME# disabled [ 0.555870] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 [ 0.555894] pci 0000:00:1a.0: reg 10: [mem 0xf2428000-0xf24283ff] [ 0.555980] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.555984] pci 0000:00:1a.0: PME# disabled [ 0.556015] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 [ 0.556036] pci 0000:00:1b.0: reg 10: [mem 0xf2420000-0xf2423fff 64bit] [ 0.556110] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.556114] pci 0000:00:1b.0: PME# disabled [ 0.556136] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 [ 0.556210] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.556214] pci 0000:00:1c.0: PME# disabled [ 0.556238] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 [ 0.556314] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.556318] pci 0000:00:1c.1: PME# disabled [ 0.556343] pci 0000:00:1c.3: [8086:3b48] type 1 class 0x000604 [ 0.556419] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold [ 0.556423] pci 0000:00:1c.3: PME# disabled [ 0.556447] pci 0000:00:1c.4: [8086:3b4a] type 1 class 0x000604 [ 0.556521] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.556525] pci 0000:00:1c.4: PME# disabled [ 0.556558] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 [ 0.556582] pci 0000:00:1d.0: reg 10: [mem 0xf2428400-0xf24287ff] [ 0.556668] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.556672] pci 0000:00:1d.0: PME# disabled [ 0.556695] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 [ 0.556767] pci 0000:00:1f.0: [8086:3b07] type 0 class 0x000601 [ 0.556880] pci 0000:00:1f.2: [8086:3b2f] type 0 class 0x000106 [ 0.556905] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f] [ 0.556916] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f] [ 0.556926] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817] [ 0.556936] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b] [ 0.556946] pci 0000:00:1f.2: reg 20: [io 0x1840-0x185f] [ 0.556957] pci 0000:00:1f.2: reg 24: [mem 0xf2427000-0xf24277ff] [ 0.557005] pci 0000:00:1f.2: PME# supported from D3hot [ 0.557009] pci 0000:00:1f.2: PME# disabled [ 0.557030] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 [ 0.557050] pci 0000:00:1f.3: reg 10: [mem 0xf2428800-0xf24288ff 64bit] [ 0.557079] pci 0000:00:1f.3: reg 20: [io 0x1860-0x187f] [ 0.557122] pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 [ 0.557148] pci 0000:00:1f.6: reg 10: [mem 0xf2426000-0xf2426fff 64bit] [ 0.557258] pci 0000:01:00.0: [10de:0a6c] type 0 class 0x000300 [ 0.557269] pci 0000:01:00.0: reg 10: [mem 0xcc000000-0xccffffff] [ 0.557282] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.557294] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref] [ 0.557302] pci 0000:01:00.0: reg 24: [io 0x2000-0x207f] [ 0.557311] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0007ffff pref] [ 0.557359] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403 [ 0.557370] pci 0000:01:00.1: reg 10: [mem 0xcdefc000-0xcdefffff] [ 0.557455] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.557554] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.557556] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff] [ 0.557559] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.557612] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.557712] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.557716] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.557723] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.557848] pci 0000:03:00.0: [8086:4238] type 0 class 0x000280 [ 0.557905] pci 0000:03:00.0: reg 10: [mem 0xf2000000-0xf2001fff 64bit] [ 0.558100] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold [ 0.558126] pci 0000:03:00.0: PME# disabled [ 0.558192] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.558293] pci 0000:00:1c.1: bridge window [io 0xf000-0x0000] (disabled) [ 0.558297] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff] [ 0.558304] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.558358] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.558458] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.558462] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.558469] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref] [ 0.558592] pci 0000:0d:00.0: [1180:e822] type 0 class 0x000805 [ 0.558614] pci 0000:0d:00.0: reg 10: [mem 0xf2100000-0xf21000ff] [ 0.558746] pci 0000:0d:00.0: supports D1 D2 [ 0.558747] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.558753] pci 0000:0d:00.0: PME# disabled [ 0.558798] pci 0000:0d:00.1: [1180:e230] type 0 class 0x000880 [ 0.558820] pci 0000:0d:00.1: reg 10: [mem 0xf2100400-0xf21004ff] [ 0.558952] pci 0000:0d:00.1: supports D1 D2 [ 0.558953] pci 0000:0d:00.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.558958] pci 0000:0d:00.1: PME# disabled [ 0.559005] pci 0000:0d:00.3: [1180:e832] type 0 class 0x000c00 [ 0.559026] pci 0000:0d:00.3: reg 10: [mem 0xf2100800-0xf2100fff] [ 0.559158] pci 0000:0d:00.3: supports D1 D2 [ 0.559160] pci 0000:0d:00.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.559165] pci 0000:0d:00.3: PME# disabled [ 0.559230] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.559331] pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.559336] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff] [ 0.559342] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.559412] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode) [ 0.559515] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) [ 0.559520] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.559526] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.559528] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.559530] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.559531] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.559533] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) [ 0.559534] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) [ 0.559536] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) [ 0.559537] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode) [ 0.559569] pci_bus 0000:00: on NUMA node 0 [ 0.559570] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.559647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT] [ 0.559668] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT] [ 0.559687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT] [ 0.559707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT] [ 0.559729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] [ 0.559827] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.560056] Unable to assume _OSC PCIe control. Disabling ASPM [ 0.562883] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 0.563273] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11) [ 0.563648] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.564149] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11) [ 0.564533] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11) [ 0.564915] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11) [ 0.565296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 0.565792] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11) [ 0.566262] SCSI subsystem initialized [ 0.566393] libata version 3.00 loaded. [ 0.566427] usbcore: registered new interface driver usbfs [ 0.566541] usbcore: registered new interface driver hub [ 0.566659] usbcore: registered new device driver usb [ 0.566848] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.566947] PCI: Using ACPI for IRQ routing [ 0.567047] PCI: pci_cache_line_size set to 64 bytes [ 0.567134] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.567136] reserve RAM buffer: 00000000bf27c000 - 00000000bfffffff [ 0.567140] reserve RAM buffer: 00000000bf35f000 - 00000000bfffffff [ 0.567145] reserve RAM buffer: 00000000bf46f000 - 00000000bfffffff [ 0.567149] reserve RAM buffer: 00000000bf717000 - 00000000bfffffff [ 0.567152] reserve RAM buffer: 00000000bf76b000 - 00000000bfffffff [ 0.567155] reserve RAM buffer: 00000000bf800000 - 00000000bfffffff [ 0.567270] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.567585] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.569692] Switching to clocksource hpet [ 0.569837] pnp: PnP ACPI init [ 0.569935] ACPI: bus type pnp registered [ 0.570024] Switched to NOHz mode on CPU #1 [ 0.570106] Switched to NOHz mode on CPU #2 [ 0.570109] Switched to NOHz mode on CPU #3 [ 0.570340] Switched to NOHz mode on CPU #0 [ 0.570908] pnp 00:00: [mem 0x00000000-0x0009ffff] [ 0.570909] pnp 00:00: [mem 0x000c0000-0x000c3fff] [ 0.570911] pnp 00:00: [mem 0x000c4000-0x000c7fff] [ 0.570912] pnp 00:00: [mem 0x000c8000-0x000cbfff] [ 0.570913] pnp 00:00: [mem 0x000cc000-0x000cffff] [ 0.570914] pnp 00:00: [mem 0x000d0000-0x000d3fff] [ 0.570916] pnp 00:00: [mem 0x000d4000-0x000d3fff disabled] [ 0.570917] pnp 00:00: [mem 0x000d8000-0x000d7fff disabled] [ 0.570918] pnp 00:00: [mem 0x000dc000-0x000dbfff disabled] [ 0.570920] pnp 00:00: [mem 0x000e0000-0x000e3fff] [ 0.570921] pnp 00:00: [mem 0x000e4000-0x000e7fff] [ 0.570922] pnp 00:00: [mem 0x000e8000-0x000ebfff] [ 0.570923] pnp 00:00: [mem 0x000ec000-0x000effff] [ 0.570925] pnp 00:00: [mem 0x000f0000-0x000fffff] [ 0.570926] pnp 00:00: [mem 0x00100000-0xbfffffff] [ 0.570927] pnp 00:00: [mem 0xfec00000-0xfed3ffff] [ 0.570928] pnp 00:00: [mem 0xfed4c000-0xffffffff] [ 0.570992] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.571093] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved [ 0.571194] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved [ 0.571294] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved [ 0.571393] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved [ 0.571494] system 00:00: [mem 0x000d0000-0x000d3fff] could not be reserved [ 0.571595] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved [ 0.571695] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved [ 0.571797] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved [ 0.571917] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved [ 0.572017] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved [ 0.572118] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved [ 0.572219] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved [ 0.572319] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved [ 0.572420] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.572429] pnp 00:01: [bus ff] [ 0.572477] pnp 00:01: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.572489] pnp 00:02: [bus 00-fe] [ 0.572491] pnp 00:02: [io 0x0cf8-0x0cff] [ 0.572493] pnp 00:02: [io 0x0000-0x0cf7 window] [ 0.572494] pnp 00:02: [io 0x0d00-0xffff window] [ 0.572495] pnp 00:02: [mem 0x000a0000-0x000bffff window] [ 0.572497] pnp 00:02: [mem 0x000c0000-0x000c3fff window] [ 0.572498] pnp 00:02: [mem 0x000c4000-0x000c7fff window] [ 0.572499] pnp 00:02: [mem 0x000c8000-0x000cbfff window] [ 0.572501] pnp 00:02: [mem 0x000cc000-0x000cffff window] [ 0.572502] pnp 00:02: [mem 0x000d0000-0x000d3fff window] [ 0.572504] pnp 00:02: [mem 0x000d4000-0x000d7fff window] [ 0.572506] pnp 00:02: [mem 0x000d8000-0x000dbfff window] [ 0.572507] pnp 00:02: [mem 0x000dc000-0x000dffff window] [ 0.572508] pnp 00:02: [mem 0x000e0000-0x000e3fff window] [ 0.572510] pnp 00:02: [mem 0x000e4000-0x000e7fff window] [ 0.572511] pnp 00:02: [mem 0x000e8000-0x000ebfff window] [ 0.572512] pnp 00:02: [mem 0x000ec000-0x000effff window] [ 0.572514] pnp 00:02: [mem 0xc0000000-0xfebfffff window] [ 0.572515] pnp 00:02: [mem 0xfed40000-0xfed4bfff window] [ 0.572560] pnp 00:02: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.572798] pnp 00:03: [io 0x0010-0x001f] [ 0.572799] pnp 00:03: [io 0x0090-0x009f] [ 0.572800] pnp 00:03: [io 0x0024-0x0025] [ 0.572801] pnp 00:03: [io 0x0028-0x0029] [ 0.572803] pnp 00:03: [io 0x002c-0x002d] [ 0.572804] pnp 00:03: [io 0x0030-0x0031] [ 0.572805] pnp 00:03: [io 0x0034-0x0035] [ 0.572806] pnp 00:03: [io 0x0038-0x0039] [ 0.572807] pnp 00:03: [io 0x003c-0x003d] [ 0.572808] pnp 00:03: [io 0x00a4-0x00a5] [ 0.572809] pnp 00:03: [io 0x00a8-0x00a9] [ 0.572811] pnp 00:03: [io 0x00ac-0x00ad] [ 0.572812] pnp 00:03: [io 0x00b0-0x00b5] [ 0.572813] pnp 00:03: [io 0x00b8-0x00b9] [ 0.572814] pnp 00:03: [io 0x00bc-0x00bd] [ 0.572815] pnp 00:03: [io 0x0050-0x0053] [ 0.572816] pnp 00:03: [io 0x0072-0x0077] [ 0.572817] pnp 00:03: [io 0x164e-0x164f] [ 0.572818] pnp 00:03: [io 0x002e-0x002f] [ 0.572820] pnp 00:03: [io 0x1000-0x107f] [ 0.572821] pnp 00:03: [io 0x1180-0x11ff] [ 0.572822] pnp 00:03: [io 0x0800-0x080f] [ 0.572823] pnp 00:03: [io 0x15e0-0x15ef] [ 0.572824] pnp 00:03: [io 0x1600-0x1641] [ 0.572841] pnp 00:03: [io 0x1644-0x167f] [ 0.572842] pnp 00:03: [mem 0xe0000000-0xefffffff] [ 0.572843] pnp 00:03: [mem 0xfeaff000-0xfeafffff] [ 0.572845] pnp 00:03: [mem 0xfed1c000-0xfed1ffff] [ 0.572846] pnp 00:03: [mem 0xfed10000-0xfed13fff] [ 0.572847] pnp 00:03: [mem 0xfed18000-0xfed18fff] [ 0.572848] pnp 00:03: [mem 0xfed19000-0xfed19fff] [ 0.572850] pnp 00:03: [mem 0xfed45000-0xfed4bfff] [ 0.572924] system 00:03: [io 0x164e-0x164f] has been reserved [ 0.573024] system 00:03: [io 0x1000-0x107f] has been reserved [ 0.573123] system 00:03: [io 0x1180-0x11ff] has been reserved [ 0.573222] system 00:03: [io 0x0800-0x080f] has been reserved [ 0.573320] system 00:03: [io 0x15e0-0x15ef] has been reserved [ 0.573420] system 00:03: [io 0x1600-0x1641] has been reserved [ 0.573519] system 00:03: [io 0x1644-0x167f] could not be reserved [ 0.573618] system 00:03: [mem 0xe0000000-0xefffffff] has been reserved [ 0.573718] system 00:03: [mem 0xfeaff000-0xfeafffff] has been reserved [ 0.573817] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.573931] system 00:03: [mem 0xfed10000-0xfed13fff] has been reserved [ 0.574031] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.574132] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.574232] system 00:03: [mem 0xfed45000-0xfed4bfff] has been reserved [ 0.574333] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.574354] pnp 00:04: [mem 0xfed00000-0xfed003ff] [ 0.574392] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.574398] pnp 00:05: [io 0x0000-0x000f] [ 0.574400] pnp 00:05: [io 0x0080-0x008f] [ 0.574401] pnp 00:05: [io 0x00c0-0x00df] [ 0.574402] pnp 00:05: [dma 4] [ 0.574436] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.574441] pnp 00:06: [io 0x0061] [ 0.574475] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.574480] pnp 00:07: [io 0x00f0] [ 0.574486] pnp 00:07: [irq 13] [ 0.574520] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.574526] pnp 00:08: [io 0x0070-0x0071] [ 0.574531] pnp 00:08: [irq 8] [ 0.574565] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.574571] pnp 00:09: [io 0x0060] [ 0.574572] pnp 00:09: [io 0x0064] [ 0.574576] pnp 00:09: [irq 1] [ 0.574611] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.574619] pnp 00:0a: [irq 12] [ 0.574654] pnp 00:0a: Plug and Play ACPI device, IDs LEN0015 PNP0f13 (active) [ 0.574921] pnp 00:0b: [mem 0xfed40000-0xfed44fff] [ 0.574963] pnp 00:0b: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active) [ 0.575571] pnp: PnP ACPI: found 12 devices [ 0.575668] ACPI: ACPI bus type pnp unregistered [ 0.612461] pci 0000:01:00.0: BAR 6: assigned [mem 0xcd000000-0xcd07ffff pref] [ 0.612626] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.612724] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff] [ 0.612831] pci 0000:00:01.0: bridge window [mem 0xcc000000-0xcdefffff] [ 0.612932] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref] [ 0.613099] pci 0000:00:1c.0: PCI bridge to [bus 02-02] [ 0.613196] pci 0000:00:1c.0: bridge window [io disabled] [ 0.613298] pci 0000:00:1c.0: bridge window [mem disabled] [ 0.613398] pci 0000:00:1c.0: bridge window [mem pref disabled] [ 0.613503] pci 0000:00:1c.1: PCI bridge to [bus 03-03] [ 0.613600] pci 0000:00:1c.1: bridge window [io disabled] [ 0.613702] pci 0000:00:1c.1: bridge window [mem 0xf2000000-0xf20fffff] [ 0.613811] pci 0000:00:1c.1: bridge window [mem pref disabled] [ 0.613915] pci 0000:00:1c.3: PCI bridge to [bus 05-0c] [ 0.614016] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff] [ 0.614118] pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff] [ 0.614220] pci 0000:00:1c.3: bridge window [mem 0xf2500000-0xf25fffff 64bit pref] [ 0.614390] pci 0000:00:1c.4: PCI bridge to [bus 0d-0d] [ 0.614487] pci 0000:00:1c.4: bridge window [io disabled] [ 0.614589] pci 0000:00:1c.4: bridge window [mem 0xf2100000-0xf21fffff] [ 0.614692] pci 0000:00:1c.4: bridge window [mem pref disabled] [ 0.614802] pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] [ 0.614899] pci 0000:00:1e.0: bridge window [io disabled] [ 0.615000] pci 0000:00:1e.0: bridge window [mem disabled] [ 0.615101] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 0.615220] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.615320] pci 0000:00:01.0: setting latency timer to 64 [ 0.615326] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.615428] pci 0000:00:1c.0: setting latency timer to 64 [ 0.615436] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 0.615537] pci 0000:00:1c.1: setting latency timer to 64 [ 0.615545] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 0.615647] pci 0000:00:1c.3: setting latency timer to 64 [ 0.615653] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.615762] pci 0000:00:1c.4: setting latency timer to 64 [ 0.615769] pci 0000:00:1e.0: setting latency timer to 64 [ 0.615773] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.615774] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.615776] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.615777] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.615779] pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.615781] pci_bus 0000:00: resource 9 [mem 0x000dc000-0x000dffff] [ 0.615782] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff] [ 0.615784] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff] [ 0.615785] pci_bus 0000:01: resource 1 [mem 0xcc000000-0xcdefffff] [ 0.615787] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref] [ 0.615789] pci_bus 0000:03: resource 1 [mem 0xf2000000-0xf20fffff] [ 0.615790] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff] [ 0.615791] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff] [ 0.615793] pci_bus 0000:05: resource 2 [mem 0xf2500000-0xf25fffff 64bit pref] [ 0.615794] pci_bus 0000:0d: resource 1 [mem 0xf2100000-0xf21fffff] [ 0.615796] pci_bus 0000:0e: resource 4 [io 0x0000-0x0cf7] [ 0.615797] pci_bus 0000:0e: resource 5 [io 0x0d00-0xffff] [ 0.615798] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff] [ 0.615800] pci_bus 0000:0e: resource 7 [mem 0x000d4000-0x000d7fff] [ 0.615801] pci_bus 0000:0e: resource 8 [mem 0x000d8000-0x000dbfff] [ 0.615803] pci_bus 0000:0e: resource 9 [mem 0x000dc000-0x000dffff] [ 0.615804] pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xfebfffff] [ 0.615820] NET: Registered protocol family 2 [ 0.615935] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.616086] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.616439] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.616634] TCP: Hash tables configured (established 131072 bind 65536) [ 0.616758] TCP reno registered [ 0.616853] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.616953] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.617120] NET: Registered protocol family 1 [ 0.617235] Simple Boot Flag at 0x35 set to 0x1 [ 0.618517] highmem bounce pool size: 64 pages [ 0.620887] msgmni has been set to 1626 [ 0.621278] alg: No test for stdrng (krng) [ 0.621441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.621608] io scheduler noop registered [ 0.623442] io scheduler deadline registered [ 0.623546] io scheduler cfq registered (default) [ 0.623718] pcieport 0000:00:01.0: setting latency timer to 64 [ 0.623738] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X [ 0.624058] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.624156] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.624415] acpiphp: Slot [1] registered [ 0.624555] intel_idle: MWAIT substates: 0x1120 [ 0.624557] intel_idle: v0.4 model 0x25 [ 0.624558] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.633070] acpi device:0c: registered as cooling_device0 [ 0.633280] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:0b/LNXVIDEO:01/input/input0 [ 0.633452] ACPI: Video Device [VID1] (multi-head: yes rom: yes post: no) [ 0.633616] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.698889] Non-volatile memory driver v1.3 [ 0.699021] Linux agpgart interface v0.103 [ 0.699146] [drm] Initialized drm 1.1.0 20060810 [ 0.699351] ahci 0000:00:1f.2: version 3.0 [ 0.699359] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.699490] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X [ 0.699541] ahci: SSS flag set, parallel bus scan disabled [ 0.699684] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode [ 0.699851] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part ems sxs apst [ 0.700021] ahci 0000:00:1f.2: setting latency timer to 64 [ 0.706144] scsi0 : ahci [ 0.706322] scsi1 : ahci [ 0.706514] scsi2 : ahci [ 0.706685] scsi3 : ahci [ 0.706854] scsi4 : ahci [ 0.707025] scsi5 : ahci [ 0.707461] ata1: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427100 irq 41 [ 0.707656] ata2: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427180 irq 41 [ 0.707820] ata3: DUMMY [ 0.707912] ata4: DUMMY [ 0.708006] ata5: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427300 irq 41 [ 0.708171] ata6: SATA max UDMA/133 abar m2048@0xf2427000 port 0xf2427380 irq 41 [ 0.708534] usbcore: registered new interface driver libusual [ 0.708712] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 0.712864] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.712967] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.713165] mousedev: PS/2 mouse device common for all mice [ 0.713391] rtc_cmos 00:08: RTC can wake from S4 [ 0.716372] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.722599] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0 [ 0.722741] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.722983] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@xxxxxxxxxx [ 0.723545] cpuidle: using governor ladder [ 0.724315] cpuidle: using governor menu [ 0.725103] ALSA device list: [ 0.725206] No soundcards found. [ 0.725314] Netfilter messages via NETLINK v0.30. [ 0.725422] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 0.725794] ctnetlink v0.93: registering with nfnetlink. [ 0.726016] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.726175] TCP cubic registered [ 0.726282] Initializing XFRM netlink socket [ 0.726907] NET: Registered protocol family 10 [ 0.727143] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 0.727262] IPv6 over IPv4 tunneling driver [ 0.727545] sit0: Features changed: 0x00007800 -> 0x00007000 [ 0.727722] NET: Registered protocol family 17 [ 0.727826] Using IPI No-Shortcut mode [ 1.011868] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.013754] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.013762] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.013949] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.015884] ata1.00: ATA-8: ST9320423AS, 0003LVM1, max UDMA/100 [ 1.016002] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 1.018251] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [ 1.018259] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.018447] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 1.020354] ata1.00: configured for UDMA/100 [ 1.020772] scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0003 PQ: 0 ANSI: 5 [ 1.021285] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) [ 1.021565] sd 0:0:0:0: [sda] Write Protect is off [ 1.021663] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.021684] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.022162] sda: detected capacity change from 0 to 320072933376 [ 1.084204] sda: sda1 sda2 < sda5 sda6 sda7 sda8 > [ 1.085162] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.325085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.327970] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded [ 1.328718] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded [ 1.330510] ata2.00: ATAPI: MATSHITADVD-RAM UJ890, SB01, max UDMA/100 [ 1.334201] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded [ 1.335035] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded [ 1.336785] ata2.00: configured for UDMA/100 [ 1.340593] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890 SB01 PQ: 0 ANSI: 5 [ 1.615345] Refined TSC clocksource calibration: 2659.999 MHz. [ 1.615469] Switching to clocksource tsc [ 1.645271] ata5: SATA link down (SStatus 0 SControl 300) [ 1.949503] ata6: SATA link down (SStatus 0 SControl 300) [ 2.003619] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null) [ 2.003822] VFS: Mounted root (ext4 filesystem) readonly on device 8:7. [ 2.004021] Freeing unused kernel memory: 368k freed [ 6.036044] udevd[4938]: starting version 171 [ 6.356019] wmi: Mapper loaded [ 6.360195] thinkpad_acpi: ThinkPad ACPI Extras v0.24 [ 6.360197] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 6.360199] thinkpad_acpi: ThinkPad BIOS 6MET83WW (1.43 ), EC 6MHT44WW-1.19 [ 6.360201] thinkpad_acpi: Lenovo ThinkPad T510, model 43495KG [ 6.363916] thinkpad_acpi: detected a 8-level brightness capable ThinkPad [ 6.364078] thinkpad_acpi: radio switch found; radios are enabled [ 6.365331] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is blocked [ 6.365811] thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked [ 6.366245] Registered led device: tpacpi::thinklight [ 6.366270] Registered led device: tpacpi::power [ 6.366283] Registered led device: tpacpi::standby [ 6.366299] Registered led device: tpacpi::thinkvantage [ 6.366941] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.366963] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 6.366968] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [ 6.366979] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [ 6.367001] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [ 6.367005] ehci_hcd 0000:00:1a.0: EHCI Host Controller [ 6.367032] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 6.368321] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one. [ 6.368375] thinkpad_acpi: Console audio control enabled, mode: override (read/write) [ 6.369464] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input2 [ 6.371407] ehci_hcd 0000:00:1a.0: debug port 2 [ 6.375424] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000 [ 6.375747] e1000e: Intel(R) PRO/1000 Network Driver - 1.3.10-k2 [ 6.375749] e1000e: Copyright(c) 1999 - 2011 Intel Corporation. [ 6.380954] thermal LNXTHERM:00: registered as thermal_zone0 [ 6.380956] ACPI: Thermal Zone [THM0] (50 C) [ 6.381161] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.381458] ACPI: AC Adapter [AC] (on-line) [ 6.385281] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 6.385320] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.385324] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.385328] usb usb1: Product: EHCI Host Controller [ 6.385332] usb usb1: Manufacturer: Linux 2.6.39-dezzy ehci_hcd [ 6.385335] usb usb1: SerialNumber: 0000:00:1a.0 [ 6.385417] hub 1-0:1.0: USB hub found [ 6.385421] hub 1-0:1.0: 3 ports detected [ 6.385479] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 6.385483] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [ 6.385494] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 6.385510] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [ 6.385514] ehci_hcd 0000:00:1d.0: EHCI Host Controller [ 6.385519] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.391293] ehci_hcd 0000:00:1d.0: debug port 2 [ 6.396712] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400 [ 6.401879] input: PC Speaker as /devices/platform/pcspkr/input/input3 [ 6.407224] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 6.407302] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.407304] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.407306] usb usb2: Product: EHCI Host Controller [ 6.407307] usb usb2: Manufacturer: Linux 2.6.39-dezzy ehci_hcd [ 6.407309] usb usb2: SerialNumber: 0000:00:1d.0 [ 6.407391] hub 2-0:1.0: USB hub found [ 6.407395] hub 2-0:1.0: 3 ports detected [ 6.407519] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 6.407528] e1000e 0000:00:19.0: setting latency timer to 64 [ 6.407788] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 6.414237] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 6.414242] ACPI: Battery Slot [BAT0] (battery present) [ 6.423214] cfg80211: Calling CRDA to update world regulatory domain [ 6.435358] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4 [ 6.435547] ACPI: Lid Switch [LID] [ 6.435576] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5 [ 6.435596] ACPI: Sleep Button [SLPB] [ 6.435639] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6 [ 6.435657] ACPI: Power Button [PWRF] [ 6.465627] ACPI: acpi_idle yielding to intel_idle [ 6.471122] sdhci: Secure Digital Host Controller Interface driver [ 6.471124] sdhci: Copyright(c) Pierre Ossman [ 6.486307] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1) [ 6.486325] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.486349] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [ 6.486355] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [ 6.486389] mmc0: no vmmc regulator found [ 6.486408] Registered led device: mmc0:: [ 6.486437] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [ 6.528264] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.528271] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.528336] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 6.558923] e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) f0:de:f1:0b:b4:e4 [ 6.558929] e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 6.558983] e1000e 0000:00:19.0: eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF [ 6.559000] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29) [ 6.559013] intel ips 0000:00:1f.6: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 6.559122] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled [ 6.559172] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90 [ 6.559188] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 6.686527] usb 1-1: new high speed USB device number 2 using ehci_hcd [ 6.778459] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 6.778522] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [ 6.778574] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 6.800711] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 6.800713] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.800981] hub 1-1:1.0: USB hub found [ 6.801041] hub 1-1:1.0: 6 ports detected [ 6.869464] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 6.869467] hda_intel: Disable MSI for Nvidia chipset [ 6.869506] HDA Intel 0000:01:00.1: setting latency timer to 64 [ 6.902987] usb 2-1: new high speed USB device number 2 using ehci_hcd [ 7.017146] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 7.017152] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.017407] hub 2-1:1.0: USB hub found [ 7.017553] hub 2-1:1.0: 8 ports detected [ 7.047394] hda-codec: No codec parser is available [ 7.050311] hda-codec: No codec parser is available [ 7.053196] hda-codec: No codec parser is available [ 7.056100] hda-codec: No codec parser is available [ 7.070466] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d [ 7.070470] iwlagn: Copyright(c) 2003-2010 Intel Corporation [ 7.070538] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 7.070601] iwlagn 0000:03:00.0: setting latency timer to 64 [ 7.070655] iwlagn 0000:03:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74 [ 7.086912] iwlagn 0000:03:00.0: device EEPROM VER=0x436, CALIB=0x6 [ 7.086917] iwlagn 0000:03:00.0: Device SKU: 0Xb [ 7.086920] iwlagn 0000:03:00.0: Valid Tx ant: 0X7, Valid Rx ant: 0X7 [ 7.086947] iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels [ 7.087029] iwlagn 0000:03:00.0: irq 44 for MSI/MSI-X [ 7.091710] usb 1-1.2: new low speed USB device number 3 using ehci_hcd [ 7.181491] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040 [ 7.181497] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 7.181501] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 7.181505] usb 1-1.2: Manufacturer: Microsoft [ 7.244385] usb 1-1.3: new full speed USB device number 4 using ehci_hcd [ 7.330240] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 [ 7.330247] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.330252] usb 1-1.3: Product: Biometric Coprocessor [ 7.330282] usb 1-1.3: Manufacturer: UPEK [ 7.336191] nvidia: module license 'NVIDIA' taints kernel. [ 7.336197] Disabling lock debugging due to kernel taint [ 7.372630] iwlagn 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 [ 7.372915] Registered led device: phy0-led [ 7.374673] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [ 7.374768] iwlagn 0000:03:00.0: wlan0: Features changed: 0x00004800 -> 0x00004000 [ 7.403806] usb 1-1.6: new high speed USB device number 5 using ehci_hcd [ 7.494200] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f [ 7.494207] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.494213] usb 1-1.6: Product: Integrated Camera [ 7.494217] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [ 7.568516] usb 2-1.4: new high speed USB device number 3 using ehci_hcd [ 7.657422] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205 [ 7.657429] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [ 7.657435] usb 2-1.4: Product: Qualcomm Gobi 2000 [ 7.657439] usb 2-1.4: Manufacturer: Qualcomm Incorporated [ 7.732926] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7 [ 7.732969] usb 2-1.5: new full speed USB device number 4 using ehci_hcd [ 7.732993] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.2/input0 [ 7.733009] usbcore: registered new interface driver usbhid [ 7.733010] usbhid: USB HID core driver [ 7.823488] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003 [ 7.823496] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.823501] usb 2-1.5: Product: Integrated Smart Card Reader [ 7.823506] usb 2-1.5: Manufacturer: Lenovo [ 7.969486] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 7.969494] nvidia 0000:01:00.0: power state changed by ACPI to D0 [ 7.969505] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 7.969516] nvidia 0000:01:00.0: setting latency timer to 64 [ 7.969678] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.09.07 Wed Jun 8 15:42:20 PDT 2011 [ 8.098121] Linux video capture interface: v2.00 [ 8.106754] usbcore: registered new interface driver usbserial [ 8.106760] usbserial: USB Serial Driver core [ 8.315237] USB Serial support registered for Qualcomm USB modem [ 8.315291] drivers/usb/serial/qcserial.c: qcprobe [ 8.315296] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [ 8.315301] drivers/usb/serial/qcserial.c: This Interface = 0 [ 8.315331] drivers/usb/serial/qcserial.c: qcprobe [ 8.315335] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [ 8.315340] drivers/usb/serial/qcserial.c: This Interface = 1 [ 8.315344] drivers/usb/serial/qcserial.c: Diagnostics Monitor found [ 8.316279] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected [ 8.316346] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [ 8.316363] drivers/usb/serial/qcserial.c: qcprobe [ 8.316365] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [ 8.316367] drivers/usb/serial/qcserial.c: This Interface = 2 [ 8.316369] drivers/usb/serial/qcserial.c: Modem port found [ 8.318032] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected [ 8.318079] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1 [ 8.318095] drivers/usb/serial/qcserial.c: qcprobe [ 8.318097] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [ 8.318098] drivers/usb/serial/qcserial.c: This Interface = 3 [ 8.318100] drivers/usb/serial/qcserial.c: NMEA GPS interface found [ 8.318760] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected [ 8.318831] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2 [ 8.318859] usbcore: registered new interface driver qcserial [ 8.438537] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f) [ 8.440145] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input8 [ 8.440212] usbcore: registered new interface driver uvcvideo [ 8.440218] USB Video Class driver (v1.0.0) [ 9.375719] Bluetooth: Core ver 2.16 [ 9.375734] NET: Registered protocol family 31 [ 9.375736] Bluetooth: HCI device and connection manager initialized [ 9.375737] Bluetooth: HCI socket layer initialized [ 9.375738] Bluetooth: L2CAP socket layer initialized [ 9.375856] Bluetooth: SCO socket layer initialized [ 9.414519] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 9.414545] usbcore: registered new interface driver btusb [ 9.457281] usbcore: registered new interface driver cdc_acm [ 9.457285] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters [ 9.512668] coretemp coretemp.0: TjMax is 105 C. [ 9.512760] coretemp coretemp.2: TjMax is 105 C. [ 9.624458] fuse init (API version 7.16) [ 9.868594] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 10.405397] thinkpad_ec: thinkpad_ec 0.40 loaded. [ 10.426408] tp_smapi 0.40 loading... [ 10.426647] tp_smapi successfully loaded (smapi_port=0xb2). [ 10.462702] tun: Universal TUN/TAP device driver, 1.6 [ 10.462704] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx> [ 10.486769] uhci_hcd: USB Universal Host Controller Interface driver [ 10.526066] usbcore: registered new interface driver usblp [ 10.591215] Initializing USB Mass Storage driver... [ 10.591361] usbcore: registered new interface driver usb-storage [ 10.591366] USB Mass Storage support registered. [ 11.332481] EXT4-fs (sda7): re-mounted. Opts: nouser_xattr [ 11.555857] REISERFS (device sda1): found reiserfs format "3.6" with standard journal [ 11.555876] REISERFS (device sda1): using ordered data mode [ 11.556281] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 [ 11.556479] REISERFS (device sda1): checking transaction log (sda1) [ 11.570301] REISERFS (device sda1): Using r5 hash to sort names [ 11.598384] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: nouser_xattr [ 11.674108] Adding 8787964k swap on /dev/sda8. Priority:64 extents:1 across:8787964k [ 11.739603] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2 [ 11.747569] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2 [ 11.748971] microcode: CPU2 sig=0x20655, pf=0x10, revision=0x2 [ 11.750268] microcode: CPU3 sig=0x20655, pf=0x10, revision=0x2 [ 11.751505] microcode: Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba [ 11.901447] microcode: Microcode Update Driver: v2.00 removed. [ 11.967499] ata1.00: configured for UDMA/100 [ 11.967507] ata1: EH complete [ 14.452605] ------------[ cut here ]------------ [ 14.452617] WARNING: at kernel/printk.c:293 do_syslog+0x8f/0x500() [ 14.452621] Hardware name: 43495KG [ 14.452623] Attempt to access syslog with CAP_SYS_ADMIN but no CAP_SYSLOG (deprecated). [ 14.452626] Modules linked in: usb_storage usbmon usblp uhci_hcd tun tp_smapi thinkpad_ec snd_seq_oss snd_seq_midi_event snd_seq_dummy snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_hrtimer snd_aloop sbs sbshc ohci_hcd msr mmc_block joydev fuse fan display coretemp cdc_acm btusb bluetooth acpi_cpufreq mperf uvcvideo qcserial usb_wwan usbserial videodev usbhid nvidia(P) iwlagn snd_hda_codec_conexant snd_hda_intel mac80211 snd_hda_codec sr_mod snd_hwdep sdhci_pci snd_pcm snd_timer sdhci processor button cfg80211 i2c_i801 cdrom pcspkr intel_ips battery snd_page_alloc ac thermal e1000e ehci_hcd thinkpad_acpi wmi mmc_core [last unloaded: microcode] [ 14.452695] Pid: 6693, comm: syslog-ng Tainted: P 2.6.39-dezzy #1 [ 14.452698] Call Trace: [ 14.452705] [<c10306dd>] warn_slowpath_common+0x6d/0xa0 [ 14.452710] [<c103170f>] ? do_syslog+0x8f/0x500 [ 14.452715] [<c103170f>] ? do_syslog+0x8f/0x500 [ 14.452719] [<c103078e>] warn_slowpath_fmt+0x2e/0x30 [ 14.452724] [<c103170f>] do_syslog+0x8f/0x500 [ 14.452731] [<c10b7436>] ? d_rehash+0x26/0x30 [ 14.452737] [<c10eac8d>] ? proc_lookup_de+0x8d/0xe0 [ 14.452743] [<c10eef5b>] kmsg_open+0x1b/0x20 [ 14.452749] [<c10e56c1>] proc_reg_open+0x81/0x130 [ 14.452753] [<c10eef40>] ? kmsg_release+0x20/0x20 [ 14.452758] [<c10eef20>] ? read_vmcore+0x2d0/0x2d0 [ 14.452764] [<c10a384b>] __dentry_open.isra.16+0x11b/0x2a0 [ 14.452769] [<c10a48c4>] nameidata_to_filp+0x54/0x70 [ 14.452774] [<c10e5640>] ? proc_alloc_inode+0x80/0x80 [ 14.452779] [<c10b148f>] do_last.isra.46+0x1ff/0x7a0 [ 14.452783] [<c10b1c7d>] path_openat+0x8d/0x320 [ 14.452788] [<c10e5590>] ? proc_destroy_inode+0x10/0x20 [ 14.452793] [<c10b1f3c>] do_filp_open+0x2c/0x80 [ 14.452799] [<c10bc993>] ? alloc_fd+0xa3/0xe0 [ 14.452804] [<c10ae895>] ? getname_flags+0xc5/0x100 [ 14.452808] [<c10a49c1>] do_sys_open+0xe1/0x1b0 [ 14.452813] [<c10a4ab9>] sys_open+0x29/0x40 [ 14.452819] [<c139d610>] sysenter_do_call+0x12/0x26 [ 14.452823] ---[ end trace 5b6ef4be634eb595 ]--- [ 18.693677] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 19.971254] smapi smapi: set_real_thresh: set start to 34 for bat=0 [ 20.174853] smapi smapi: set_real_thresh: set stop to 90 for bat=0 [ 23.685187] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 23.735903] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 23.736290] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 29.615053] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 30.818381] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 30.869011] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [ 30.869466] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 31.176690] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.764395] wlan0: authenticate with 00:24:fe:06:70:b7 (try 1) [ 36.766459] wlan0: authenticated [ 36.766676] wlan0: associate with 00:24:fe:06:70:b7 (try 1) [ 36.772964] wlan0: RX AssocResp from 00:24:fe:06:70:b7 (capab=0x411 status=0 aid=2) [ 36.772968] wlan0: associated [ 36.776569] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 41.159311] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X [ 47.741640] wlan0: no IPv6 routers present [ 3150.332462] tun0: Features changed: 0x00004800 -> 0x00004000 [47444.179398] ehci_hcd 0000:00:1d.0: remove, state 1 [47444.179409] usb usb2: USB disconnect, device number 1 [47444.179412] usb 2-1: USB disconnect, device number 2 [47444.179414] usb 2-1.4: USB disconnect, device number 3 [47444.179545] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [47444.179554] drivers/usb/serial/qcserial.c: qc_release [47444.179562] qcserial 2-1.4:1.1: device disconnected [47444.179626] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [47444.179634] drivers/usb/serial/qcserial.c: qc_release [47444.179640] qcserial 2-1.4:1.2: device disconnected [47444.179698] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [47444.179704] drivers/usb/serial/qcserial.c: qc_release [47444.179709] qcserial 2-1.4:1.3: device disconnected [47444.179762] usb 2-1.5: USB disconnect, device number 4 [47444.188632] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered [47444.188718] ehci_hcd 0000:00:1d.0: PCI INT D disabled [47444.188727] ehci_hcd 0000:00:1a.0: remove, state 1 [47444.188734] usb usb1: USB disconnect, device number 1 [47444.188736] usb 1-1: USB disconnect, device number 2 [47444.188738] usb 1-1.2: USB disconnect, device number 3 [47444.204772] usb 1-1.3: USB disconnect, device number 4 [47444.204856] usb 1-1.6: USB disconnect, device number 5 [47444.227598] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered [47444.227671] ehci_hcd 0000:00:1a.0: PCI INT D disabled [47444.236819] sdhci-pci 0000:0d:00.0: PCI INT A disabled [47444.452512] ata1.00: configured for UDMA/100 [47444.452518] ata1: EH complete [47444.452604] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [47446.280548] PM: Syncing filesystems ... done. [47447.126462] Freezing user space processes ... (elapsed 0.01 seconds) done. [47447.137325] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [47447.148435] Suspending console(s) (use no_console_suspend to debug) [47447.157335] sd 0:0:0:0: [sda] Stopping disk [47447.158358] HDA Intel 0000:01:00.1: PCI INT A disabled [47447.158463] ACPI handle has no context! [47447.158493] HDA Intel 0000:00:1b.0: PCI INT B disabled [47447.238771] e1000e 0000:00:19.0: PCI INT A disabled [47447.542393] PM: suspend of devices complete after 394.773 msecs [47447.553701] PM: late suspend of devices complete after 11.331 msecs [47447.553896] ACPI: Preparing to enter system sleep state S3 [47447.603195] PM: Saving platform NVS memory [47447.604439] Disabling non-boot CPUs ... [47447.618503] CPU 1 is now offline [47447.633474] CPU 2 is now offline [47447.644191] CPU 3 is now offline [47447.644464] Extended CMOS year: 2000 [47447.644702] ACPI: Low-level resume complete [47447.644755] PM: Restoring platform NVS memory [47447.645402] Extended CMOS year: 2000 [47447.645432] Enabling non-boot CPUs ... [47447.647529] Booting Node 0 Processor 1 APIC 0x1 [47447.647532] smpboot cpu 1: start_ip = 99000 [47447.657855] Initializing CPU#1 [47447.738733] Switched to NOHz mode on CPU #1 [47447.754787] CPU1 is up [47447.754850] Booting Node 0 Processor 2 APIC 0x4 [47447.754852] smpboot cpu 2: start_ip = 99000 [47447.765070] Initializing CPU#2 [47447.846445] Switched to NOHz mode on CPU #2 [47447.862512] CPU2 is up [47447.862571] Booting Node 0 Processor 3 APIC 0x5 [47447.862572] smpboot cpu 3: start_ip = 99000 [47447.872790] Initializing CPU#3 [47447.954240] Switched to NOHz mode on CPU #3 [47447.970391] CPU3 is up [47447.972166] ACPI: Waking up from system sleep state S3 [47448.035001] intel ips 0000:00:1f.6: MCP limit exceeded: Avg temp 20750, limit 9000 [47448.062098] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [47448.062203] pci 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40a) [47448.062220] pci 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428000) [47448.062227] pci 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [47448.062364] pcieport 0000:00:1c.1: restoring config space at offset 0x7 (was 0xf0, writing 0x200000f0) [47448.062460] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b) [47448.062470] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [47448.062475] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf210f210) [47448.062479] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0x200000f0) [47448.062487] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [47448.062492] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [47448.062525] pci 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40a) [47448.062542] pci 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428400) [47448.062549] pci 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [47448.062659] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [47448.062722] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40a) [47448.062743] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [47448.062781] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800010, writing 0x800000) [47448.062785] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007) [47448.062822] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [47448.063059] pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [47448.063273] PM: early resume of devices complete after 1.304 msecs [47448.063528] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [47448.063546] HDA Intel 0000:00:1b.0: setting latency timer to 64 [47448.063587] ahci 0000:00:1f.2: setting latency timer to 64 [47448.063693] HDA Intel 0000:00:1b.0: irq 42 for MSI/MSI-X [47448.063696] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [47448.063713] HDA Intel 0000:01:00.1: setting latency timer to 64 [47448.063736] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [47448.063748] sd 0:0:0:0: [sda] Starting disk [47448.064428] pci 0000:00:1e.0: setting latency timer to 64 [47448.369199] ata5: SATA link down (SStatus 0 SControl 300) [47448.371213] ata6: SATA link down (SStatus 0 SControl 300) [47448.373194] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [47448.377255] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded [47448.379534] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded [47448.390932] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded [47448.393211] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded [47448.396436] ata2.00: configured for UDMA/100 [47450.249527] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [47450.441251] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [47450.441258] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [47450.441263] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [47450.445136] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [47450.445143] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [47450.445148] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [47450.446789] ata1.00: configured for UDMA/100 [47450.446959] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [47450.551615] PM: resume of devices complete after 2494.429 msecs [47450.551721] Restarting tasks ... done. [47450.552236] video LNXVIDEO:01: Restoring backlight state [47450.605811] cfg80211: Calling CRDA for country: EU [47450.827059] ata1.00: configured for UDMA/100 [47450.827069] ata1: EH complete [47451.041720] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [47451.041724] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [47451.041756] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [47451.041761] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [47451.041772] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [47451.041803] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [47451.041808] ehci_hcd 0000:00:1a.0: EHCI Host Controller [47451.041888] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [47451.045453] ehci_hcd 0000:00:1a.0: debug port 2 [47451.049483] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000 [47451.059387] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [47451.059428] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [47451.059431] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [47451.059433] usb usb1: Product: EHCI Host Controller [47451.059435] usb usb1: Manufacturer: Linux 2.6.39-dezzy ehci_hcd [47451.059437] usb usb1: SerialNumber: 0000:00:1a.0 [47451.059534] hub 1-0:1.0: USB hub found [47451.059539] hub 1-0:1.0: 3 ports detected [47451.059612] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [47451.059617] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [47451.059626] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [47451.059648] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [47451.059652] ehci_hcd 0000:00:1d.0: EHCI Host Controller [47451.059689] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [47451.064399] ehci_hcd 0000:00:1d.0: debug port 2 [47451.068399] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400 [47451.078339] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [47451.078377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [47451.078380] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [47451.078383] usb usb2: Product: EHCI Host Controller [47451.078385] usb usb2: Manufacturer: Linux 2.6.39-dezzy ehci_hcd [47451.078387] usb usb2: SerialNumber: 0000:00:1d.0 [47451.078481] hub 2-0:1.0: USB hub found [47451.078485] hub 2-0:1.0: 3 ports detected [47451.320095] sdhci: Secure Digital Host Controller Interface driver [47451.320099] sdhci: Copyright(c) Pierre Ossman [47451.332928] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1) [47451.332947] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [47451.332978] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [47451.332988] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [47451.333019] mmc0: no vmmc regulator found [47451.333054] Registered led device: mmc0:: [47451.333095] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [47451.360645] usb 1-1: new high speed USB device number 2 using ehci_hcd [47451.474685] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [47451.474688] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [47451.474961] hub 1-1:1.0: USB hub found [47451.475053] hub 1-1:1.0: 6 ports detected [47451.577096] usb 2-1: new high speed USB device number 2 using ehci_hcd [47451.632707] uhci_hcd: USB Universal Host Controller Interface driver [47451.691143] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [47451.691147] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [47451.691424] hub 2-1:1.0: USB hub found [47451.691510] hub 2-1:1.0: 8 ports detected [47451.765722] usb 1-1.3: new full speed USB device number 3 using ehci_hcd [47451.851615] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 [47451.851619] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [47451.851622] usb 1-1.3: Product: Biometric Coprocessor [47451.851624] usb 1-1.3: Manufacturer: UPEK [47451.925060] usb 1-1.6: new high speed USB device number 4 using ehci_hcd [47452.008596] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f [47452.008601] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [47452.008604] usb 1-1.6: Product: Integrated Camera [47452.008606] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [47452.009381] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f) [47452.010548] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9 [47452.083927] usb 2-1.4: new high speed USB device number 3 using ehci_hcd [47452.170568] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0 [47452.170573] usb 2-1.4: config 1 has no interface number 0 [47452.172439] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204 [47452.172443] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [47452.172446] usb 2-1.4: Product: Qualcomm Gobi 2000 [47452.172448] usb 2-1.4: Manufacturer: Qualcomm Incorporated [47452.173984] drivers/usb/serial/qcserial.c: qcprobe [47452.173986] drivers/usb/serial/qcserial.c: Num Interfaces = 1 [47452.173988] drivers/usb/serial/qcserial.c: This Interface = 1 [47452.173990] drivers/usb/serial/qcserial.c: QDL port found [47452.173994] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected [47452.174067] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [47452.246507] usb 2-1.5: new full speed USB device number 4 using ehci_hcd [47452.338900] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003 [47452.338905] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [47452.338908] usb 2-1.5: Product: Integrated Smart Card Reader [47452.338911] usb 2-1.5: Manufacturer: Lenovo [47456.509328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [47456.627068] ADDRCONF(NETDEV_UP): wlan0: link is not ready [47456.848069] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [47456.898812] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [47456.899095] ADDRCONF(NETDEV_UP): eth0: link is not ready [47457.615043] usb 1-1.2: new low speed USB device number 5 using ehci_hcd [47457.704942] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040 [47457.704946] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [47457.704949] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [47457.704952] usb 1-1.2: Manufacturer: Microsoft [47457.707469] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input10 [47457.707575] generic-usb 0003:045E:0040.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.2/input0 [47461.382147] ADDRCONF(NETDEV_UP): wlan0: link is not ready [47462.716169] smapi smapi: set_real_thresh: set start to 34 for bat=0 [47462.919657] smapi smapi: set_real_thresh: set stop to 90 for bat=0 [47462.965879] ata1.00: configured for UDMA/100 [47462.965885] ata1: EH complete [47463.087107] udevd[10791]: starting version 171 [47466.371779] ADDRCONF(NETDEV_UP): wlan0: link is not ready [47466.906134] usb 2-1.4: USB disconnect, device number 3 [47466.906246] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [47466.906259] drivers/usb/serial/qcserial.c: qc_release [47466.906268] qcserial 2-1.4:1.1: device disconnected [47467.848272] usb 2-1.4: new high speed USB device number 5 using ehci_hcd [47467.934802] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205 [47467.934806] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [47467.934809] usb 2-1.4: Product: Qualcomm Gobi 2000 [47467.934812] usb 2-1.4: Manufacturer: Qualcomm Incorporated [47467.936720] drivers/usb/serial/qcserial.c: qcprobe [47467.936722] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [47467.936724] drivers/usb/serial/qcserial.c: This Interface = 0 [47467.936806] drivers/usb/serial/qcserial.c: qcprobe [47467.936809] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [47467.936811] drivers/usb/serial/qcserial.c: This Interface = 1 [47467.936813] drivers/usb/serial/qcserial.c: Diagnostics Monitor found [47467.937196] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected [47467.937265] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [47467.937304] drivers/usb/serial/qcserial.c: qcprobe [47467.937306] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [47467.937308] drivers/usb/serial/qcserial.c: This Interface = 2 [47467.937310] drivers/usb/serial/qcserial.c: Modem port found [47467.938210] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected [47467.938275] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1 [47467.938317] drivers/usb/serial/qcserial.c: qcprobe [47467.938319] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [47467.938321] drivers/usb/serial/qcserial.c: This Interface = 3 [47467.938323] drivers/usb/serial/qcserial.c: NMEA GPS interface found [47467.938945] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected [47467.939007] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2 [47470.222357] ADDRCONF(NETDEV_UP): wlan0: link is not ready [47470.409769] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [47470.460500] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [47470.460772] ADDRCONF(NETDEV_UP): eth0: link is not ready [47470.589701] ADDRCONF(NETDEV_UP): wlan0: link is not ready [47472.770730] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1) [47472.803251] wlan0: authenticated [47472.803324] wlan0: associate with c0:c5:20:84:f5:29 (try 1) [47472.815194] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=10) [47472.815197] wlan0: associated [47472.822334] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [47483.173998] wlan0: no IPv6 routers present [51839.605663] wlan0: deauthenticating from c0:c5:20:84:f5:29 by local choice (reason=3) [51839.626843] cfg80211: Calling CRDA to update world regulatory domain [51839.736973] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51839.948183] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [51839.998920] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [51839.999224] ADDRCONF(NETDEV_UP): eth0: link is not ready [51840.306622] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51840.431345] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51840.617490] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [51840.668233] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [51840.668519] ADDRCONF(NETDEV_UP): eth0: link is not ready [51840.800308] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51884.940399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51885.140545] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [51885.192390] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [51885.193593] ADDRCONF(NETDEV_UP): eth0: link is not ready [51885.314437] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51886.334333] ADDRCONF(NETDEV_UP): wlan0: link is not ready [51886.540995] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [51886.592855] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [51886.594040] ADDRCONF(NETDEV_UP): eth0: link is not ready [51887.459023] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1) [51887.646109] wlan0: authenticated [51887.646767] wlan0: associate with c0:c5:20:84:f5:29 (try 1) [51887.845604] wlan0: associate with c0:c5:20:84:f5:29 (try 2) [51888.045105] wlan0: associate with c0:c5:20:84:f5:29 (try 3) [51888.244598] wlan0: association with c0:c5:20:84:f5:29 timed out [51900.767792] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1) [51900.966353] wlan0: authenticate with c0:c5:20:84:f5:29 (try 2) [51901.165848] wlan0: authenticate with c0:c5:20:84:f5:29 (try 3) [51901.365342] wlan0: authentication with c0:c5:20:84:f5:29 timed out [51913.998968] wlan0: authenticate with 00:1f:41:a5:05:49 (try 1) [51914.001212] wlan0: authenticated [51914.001286] wlan0: associate with 00:1f:41:a5:05:49 (try 1) [51914.004538] wlan0: RX AssocResp from 00:1f:41:a5:05:49 (capab=0x431 status=0 aid=3) [51914.004541] wlan0: associated [51914.023166] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [51924.679250] wlan0: no IPv6 routers present [56042.481028] wlan0: deauthenticating from 00:1f:41:a5:05:49 by local choice (reason=3) [56042.498237] cfg80211: Calling CRDA for country: 97 [56042.613643] ADDRCONF(NETDEV_UP): wlan0: link is not ready [56042.825574] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [56042.876384] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [56042.876692] ADDRCONF(NETDEV_UP): eth0: link is not ready [56043.002482] ADDRCONF(NETDEV_UP): wlan0: link is not ready [56043.122850] ADDRCONF(NETDEV_UP): wlan0: link is not ready [56043.313328] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [56043.364058] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [56043.364340] ADDRCONF(NETDEV_UP): eth0: link is not ready [56043.496256] ADDRCONF(NETDEV_UP): wlan0: link is not ready [56092.338941] ADDRCONF(NETDEV_UP): wlan0: link is not ready [56092.533602] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [56092.584353] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [56092.585717] ADDRCONF(NETDEV_UP): eth0: link is not ready [56092.712774] ADDRCONF(NETDEV_UP): wlan0: link is not ready [56093.713992] ADDRCONF(NETDEV_UP): wlan0: link is not ready [56093.923336] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [56093.973803] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [56093.974105] ADDRCONF(NETDEV_UP): eth0: link is not ready [56094.883472] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1) [56094.942554] wlan0: authenticated [56094.942627] wlan0: associate with c0:c5:20:84:f5:29 (try 1) [56094.957186] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=2) [56094.957190] wlan0: associated [56094.972653] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [56105.457635] wlan0: no IPv6 routers present [63674.179698] wlan0: deauthenticating from c0:c5:20:84:f5:29 by local choice (reason=3) [63674.207752] cfg80211: Calling CRDA to update world regulatory domain [63674.318900] ADDRCONF(NETDEV_UP): wlan0: link is not ready [63674.530097] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [63674.580819] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [63674.581097] ADDRCONF(NETDEV_UP): eth0: link is not ready [63674.827619] ADDRCONF(NETDEV_UP): wlan0: link is not ready [63674.954434] ADDRCONF(NETDEV_UP): wlan0: link is not ready [63675.149529] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [63675.200258] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [63675.200564] ADDRCONF(NETDEV_UP): eth0: link is not ready [63675.333372] ADDRCONF(NETDEV_UP): wlan0: link is not ready [63723.812431] ADDRCONF(NETDEV_UP): wlan0: link is not ready [63724.006666] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [63724.057394] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [63724.057698] ADDRCONF(NETDEV_UP): eth0: link is not ready [63724.182490] ADDRCONF(NETDEV_UP): wlan0: link is not ready [63725.187013] ADDRCONF(NETDEV_UP): wlan0: link is not ready [63725.382166] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [63725.432895] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [63725.433193] ADDRCONF(NETDEV_UP): eth0: link is not ready [63726.314378] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1) [63726.335979] wlan0: authenticated [63726.336052] wlan0: associate with c0:c5:20:84:f5:29 (try 1) [63726.401772] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=4) [63726.401776] wlan0: associated [63726.404779] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [63736.843897] wlan0: no IPv6 routers present [67475.777745] wlan0: deauthenticating from c0:c5:20:84:f5:29 by local choice (reason=3) [67475.799421] cfg80211: Calling CRDA for country: EU [67475.918490] ADDRCONF(NETDEV_UP): wlan0: link is not ready [67476.125757] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [67476.176477] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [67476.176749] ADDRCONF(NETDEV_UP): eth0: link is not ready [67476.377340] ADDRCONF(NETDEV_UP): wlan0: link is not ready [67476.501041] ADDRCONF(NETDEV_UP): wlan0: link is not ready [67476.695298] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [67476.746040] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [67476.746311] ADDRCONF(NETDEV_UP): eth0: link is not ready [67476.891078] ADDRCONF(NETDEV_UP): wlan0: link is not ready [67479.049145] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1) [67479.057369] wlan0: authenticated [67479.057445] wlan0: associate with c0:c5:20:84:f5:29 (try 1) [67479.066027] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=2) [67479.066030] wlan0: associated [67479.068985] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [67489.172472] wlan0: no IPv6 routers present [71732.646288] wlan0: deauthenticating from c0:c5:20:84:f5:29 by local choice (reason=3) [71732.673385] cfg80211: Calling CRDA to update world regulatory domain [71732.789807] ADDRCONF(NETDEV_UP): wlan0: link is not ready [71733.023662] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [71733.074390] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [71733.074697] ADDRCONF(NETDEV_UP): eth0: link is not ready [71733.378630] ADDRCONF(NETDEV_UP): wlan0: link is not ready [71733.495012] ADDRCONF(NETDEV_UP): wlan0: link is not ready [71733.683982] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [71733.734712] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [71733.734996] ADDRCONF(NETDEV_UP): eth0: link is not ready [71733.865343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [71736.023031] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1) [71736.040330] wlan0: authenticated [71736.040462] wlan0: associate with c0:c5:20:84:f5:29 (try 1) [71736.045643] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=2) [71736.045647] wlan0: associated [71736.058398] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [71746.776567] wlan0: no IPv6 routers present [72955.669588] cfg80211: Calling CRDA for country: EU [72959.085776] wlan0: authenticate with 00:1f:41:a5:05:c9 (try 1) [72959.092405] wlan0: authenticated [72959.092594] wlan0: associate with 00:1f:41:a5:05:c9 (try 1) [72959.095894] wlan0: RX AssocResp from 00:1f:41:a5:05:c9 (capab=0x431 status=0 aid=1) [72959.095901] wlan0: associated [72983.164742] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X [73715.183495] nvidia 0000:01:00.0: irq 45 for MSI/MSI-X [73762.692621] wlan0: deauthenticating from 00:1f:41:a5:05:c9 by local choice (reason=3) [73762.717879] cfg80211: Calling CRDA to update world regulatory domain [73762.832812] ADDRCONF(NETDEV_UP): wlan0: link is not ready [73763.073124] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [73763.123860] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [73763.124131] ADDRCONF(NETDEV_UP): eth0: link is not ready [73763.337964] ADDRCONF(NETDEV_UP): wlan0: link is not ready [73763.453552] ADDRCONF(NETDEV_UP): wlan0: link is not ready [73763.639690] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [73763.690413] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X [73763.690682] ADDRCONF(NETDEV_UP): eth0: link is not ready [73763.844223] ADDRCONF(NETDEV_UP): wlan0: link is not ready [73766.033030] wlan0: authenticate with c0:c5:20:84:f5:29 (try 1) [73766.035283] wlan0: authenticated [73766.035368] wlan0: waiting for beacon from c0:c5:20:84:f5:29 [73766.061150] wlan0: beacon received [73766.069332] wlan0: associate with c0:c5:20:84:f5:29 (try 1) [73766.072473] wlan0: RX AssocResp from c0:c5:20:84:f5:29 (capab=0x431 status=0 aid=2) [73766.072478] wlan0: associated [73766.078258] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [73777.016525] wlan0: no IPv6 routers present [76922.198066] ehci_hcd 0000:00:1d.0: remove, state 1 [76922.198078] usb usb2: USB disconnect, device number 1 [76922.198081] usb 2-1: USB disconnect, device number 2 [76922.198083] usb 2-1.4: USB disconnect, device number 5 [76922.198227] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [76922.198238] drivers/usb/serial/qcserial.c: qc_release [76922.198246] qcserial 2-1.4:1.1: device disconnected [76922.198329] qcserial ttyUSB1: Qualcomm USB modem converter now disconnected from ttyUSB1 [76922.198336] drivers/usb/serial/qcserial.c: qc_release [76922.198342] qcserial 2-1.4:1.2: device disconnected [76922.198397] qcserial ttyUSB2: Qualcomm USB modem converter now disconnected from ttyUSB2 [76922.198402] drivers/usb/serial/qcserial.c: qc_release [76922.198408] qcserial 2-1.4:1.3: device disconnected [76922.198464] usb 2-1.5: USB disconnect, device number 4 [76922.207345] ehci_hcd 0000:00:1d.0: USB bus 2 deregistered [76922.207438] ehci_hcd 0000:00:1d.0: PCI INT D disabled [76922.207449] ehci_hcd 0000:00:1a.0: remove, state 1 [76922.207458] usb usb1: USB disconnect, device number 1 [76922.207460] usb 1-1: USB disconnect, device number 2 [76922.207463] usb 1-1.2: USB disconnect, device number 5 [76922.226481] usb 1-1.3: USB disconnect, device number 3 [76922.226575] usb 1-1.6: USB disconnect, device number 4 [76922.265190] ehci_hcd 0000:00:1a.0: USB bus 1 deregistered [76922.265291] ehci_hcd 0000:00:1a.0: PCI INT D disabled [76922.276958] sdhci-pci 0000:0d:00.0: PCI INT A disabled [76922.587106] ata1.00: configured for UDMA/100 [76922.587113] ata1: EH complete [76922.587208] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [76924.200691] PM: Syncing filesystems ... done. [76935.389868] Freezing user space processes ... (elapsed 0.01 seconds) done. [76935.400920] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done. [76935.412043] Suspending console(s) (use no_console_suspend to debug) [76935.420424] sd 0:0:0:0: [sda] Stopping disk [76935.421868] HDA Intel 0000:01:00.1: PCI INT A disabled [76935.421961] ACPI handle has no context! [76935.421975] HDA Intel 0000:00:1b.0: PCI INT B disabled [76935.805031] PM: suspend of devices complete after 393.812 msecs [76935.816464] PM: late suspend of devices complete after 11.456 msecs [76935.816652] ACPI: Preparing to enter system sleep state S3 [76935.865841] PM: Saving platform NVS memory [76935.867065] Disabling non-boot CPUs ... [76935.881140] CPU 1 is now offline [76935.898852] CPU 2 is now offline [76935.908774] CPU 3 is now offline [76935.909067] Extended CMOS year: 2000 [76935.909306] ACPI: Low-level resume complete [76935.909358] PM: Restoring platform NVS memory [76935.910002] Extended CMOS year: 2000 [76935.910018] Enabling non-boot CPUs ... [76935.912130] Booting Node 0 Processor 1 APIC 0x1 [76935.912133] smpboot cpu 1: start_ip = 99000 [76935.922457] Initializing CPU#1 [76936.003314] Switched to NOHz mode on CPU #1 [76936.023384] CPU1 is up [76936.023447] Booting Node 0 Processor 2 APIC 0x4 [76936.023448] smpboot cpu 2: start_ip = 99000 [76936.033665] Initializing CPU#2 [76936.115013] Switched to NOHz mode on CPU #2 [76936.135076] CPU2 is up [76936.135134] Booting Node 0 Processor 3 APIC 0x5 [76936.135136] smpboot cpu 3: start_ip = 99000 [76936.145354] Initializing CPU#3 [76936.226798] Switched to NOHz mode on CPU #3 [76936.246949] CPU3 is up [76936.248697] ACPI: Waking up from system sleep state S3 [76936.328665] pcieport 0000:00:01.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507) [76936.328771] pci 0000:00:1a.0: restoring config space at offset 0xf (was 0x400, writing 0x40a) [76936.328788] pci 0000:00:1a.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428000) [76936.328795] pci 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [76936.329023] pcieport 0000:00:1c.4: restoring config space at offset 0xf (was 0x100, writing 0x4010b) [76936.329033] pcieport 0000:00:1c.4: restoring config space at offset 0x9 (was 0x10001, writing 0x1fff1) [76936.329038] pcieport 0000:00:1c.4: restoring config space at offset 0x8 (was 0x0, writing 0xf210f210) [76936.329042] pcieport 0000:00:1c.4: restoring config space at offset 0x7 (was 0x20000000, writing 0xf0) [76936.329050] pcieport 0000:00:1c.4: restoring config space at offset 0x3 (was 0x810000, writing 0x810010) [76936.329055] pcieport 0000:00:1c.4: restoring config space at offset 0x1 (was 0x100000, writing 0x100107) [76936.329088] pci 0000:00:1d.0: restoring config space at offset 0xf (was 0x400, writing 0x40a) [76936.329105] pci 0000:00:1d.0: restoring config space at offset 0x4 (was 0x0, writing 0xf2428400) [76936.329112] pci 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2900000, writing 0x2900102) [76936.329223] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407) [76936.329286] intel ips 0000:00:1f.6: restoring config space at offset 0xf (was 0x400, writing 0x40a) [76936.329307] intel ips 0000:00:1f.6: restoring config space at offset 0x1 (was 0x100000, writing 0x100002) [76936.329345] nvidia 0000:01:00.0: restoring config space at offset 0x3 (was 0x800010, writing 0x800000) [76936.329349] nvidia 0000:01:00.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100007) [76936.329387] HDA Intel 0000:01:00.1: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [76936.329470] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506) [76936.329627] pci 0000:0d:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102) [76936.329839] PM: early resume of devices complete after 1.304 msecs [76936.330095] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [76936.330102] pci 0000:00:1e.0: setting latency timer to 64 [76936.330114] HDA Intel 0000:00:1b.0: setting latency timer to 64 [76936.330145] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [76936.330154] ahci 0000:00:1f.2: setting latency timer to 64 [76936.330235] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X [76936.330286] HDA Intel 0000:01:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [76936.330290] HDA Intel 0000:01:00.1: setting latency timer to 64 [76936.330369] sd 0:0:0:0: [sda] Starting disk [76936.633776] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [76936.848028] ata5: SATA link down (SStatus 0 SControl 300) [76936.848075] ata6: SATA link down (SStatus 0 SControl 300) [76936.848363] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded [76936.849150] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded [76936.854483] ata2.00: ACPI cmd e3/00:10:00:00:00:a0 (IDLE) succeeded [76936.855165] ata2.00: ACPI cmd e3/00:03:00:00:00:a0 (IDLE) succeeded [76936.856797] ata2.00: configured for UDMA/100 [76938.475143] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [76938.684846] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [76938.684853] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [76938.684859] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [76938.688687] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded [76938.688694] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [76938.688700] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [76938.690343] ata1.00: configured for UDMA/100 [76938.690512] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [76938.796717] PM: resume of devices complete after 2472.959 msecs [76938.796824] Restarting tasks ... done. [76938.797697] video LNXVIDEO:01: Restoring backlight state [76938.845148] cfg80211: Calling CRDA for country: 97 [76939.038530] ata1.00: configured for UDMA/100 [76939.038535] ata1: EH complete [76939.298047] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [76939.298051] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [76939.298084] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [76939.298090] ehci_hcd 0000:00:1a.0: power state changed by ACPI to D0 [76939.298100] ehci_hcd 0000:00:1a.0: PCI INT D -> GSI 23 (level, low) -> IRQ 23 [76939.298128] ehci_hcd 0000:00:1a.0: setting latency timer to 64 [76939.298132] ehci_hcd 0000:00:1a.0: EHCI Host Controller [76939.298208] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [76939.303959] ehci_hcd 0000:00:1a.0: debug port 2 [76939.308931] ehci_hcd 0000:00:1a.0: irq 23, io mem 0xf2428000 [76939.317896] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [76939.317938] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [76939.317940] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [76939.317943] usb usb1: Product: EHCI Host Controller [76939.317945] usb usb1: Manufacturer: Linux 2.6.39-dezzy ehci_hcd [76939.317947] usb usb1: SerialNumber: 0000:00:1a.0 [76939.318052] hub 1-0:1.0: USB hub found [76939.318057] hub 1-0:1.0: 3 ports detected [76939.318140] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [76939.318146] ehci_hcd 0000:00:1d.0: power state changed by ACPI to D0 [76939.318154] ehci_hcd 0000:00:1d.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [76939.318177] ehci_hcd 0000:00:1d.0: setting latency timer to 64 [76939.318181] ehci_hcd 0000:00:1d.0: EHCI Host Controller [76939.318220] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 [76939.323903] ehci_hcd 0000:00:1d.0: debug port 2 [76939.328870] ehci_hcd 0000:00:1d.0: irq 19, io mem 0xf2428400 [76939.337845] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [76939.337881] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [76939.337884] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [76939.337887] usb usb2: Product: EHCI Host Controller [76939.337889] usb usb2: Manufacturer: Linux 2.6.39-dezzy ehci_hcd [76939.337890] usb usb2: SerialNumber: 0000:00:1d.0 [76939.337982] hub 2-0:1.0: USB hub found [76939.337986] hub 2-0:1.0: 3 ports detected [76939.585979] sdhci: Secure Digital Host Controller Interface driver [76939.585983] sdhci: Copyright(c) Pierre Ossman [76939.610455] sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e822] (rev 1) [76939.610477] sdhci-pci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [76939.610513] sdhci-pci 0000:0d:00.0: Will use DMA mode even though HW doesn't fully claim to support it. [76939.610525] sdhci-pci 0000:0d:00.0: setting latency timer to 64 [76939.610570] mmc0: no vmmc regulator found [76939.610604] Registered led device: mmc0:: [76939.610648] mmc0: SDHCI controller on PCI [0000:0d:00.0] using DMA [76939.619145] usb 1-1: new high speed USB device number 2 using ehci_hcd [76939.733418] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [76939.733422] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [76939.733692] hub 1-1:1.0: USB hub found [76939.733786] hub 1-1:1.0: 6 ports detected [76939.836779] usb 2-1: new high speed USB device number 2 using ehci_hcd [76939.950628] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [76939.950632] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [76939.950902] hub 2-1:1.0: USB hub found [76939.950996] hub 2-1:1.0: 8 ports detected [76939.966542] uhci_hcd: USB Universal Host Controller Interface driver [76940.015366] usb 1-1.2: new low speed USB device number 3 using ehci_hcd [76940.107507] usb 1-1.2: New USB device found, idVendor=045e, idProduct=0040 [76940.107511] usb 1-1.2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [76940.107514] usb 1-1.2: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [76940.107516] usb 1-1.2: Manufacturer: Microsoft [76940.110300] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input11 [76940.110381] generic-usb 0003:045E:0040.0003: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1a.0-1.2/input0 [76940.183809] usb 1-1.3: new full speed USB device number 4 using ehci_hcd [76940.269579] usb 1-1.3: New USB device found, idVendor=147e, idProduct=2016 [76940.269584] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [76940.269586] usb 1-1.3: Product: Biometric Coprocessor [76940.269588] usb 1-1.3: Manufacturer: UPEK [76940.320462] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [76940.342413] usb 1-1.6: new high speed USB device number 5 using ehci_hcd [76940.372316] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [76940.373461] ADDRCONF(NETDEV_UP): eth0: link is not ready [76940.438037] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=480f [76940.438041] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [76940.438044] usb 1-1.6: Product: Integrated Camera [76940.438045] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd. [76940.438814] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:480f) [76940.440016] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input12 [76940.512992] usb 2-1.4: new high speed USB device number 3 using ehci_hcd [76940.600136] usb 2-1.4: config 1 has an invalid interface number: 1 but max is 0 [76940.600140] usb 2-1.4: config 1 has no interface number 0 [76940.602000] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9204 [76940.602004] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [76940.602006] usb 2-1.4: Product: Qualcomm Gobi 2000 [76940.602008] usb 2-1.4: Manufacturer: Qualcomm Incorporated [76940.603545] drivers/usb/serial/qcserial.c: qcprobe [76940.603548] drivers/usb/serial/qcserial.c: Num Interfaces = 1 [76940.603550] drivers/usb/serial/qcserial.c: This Interface = 1 [76940.603552] drivers/usb/serial/qcserial.c: QDL port found [76940.603556] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected [76940.603637] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [76940.676579] usb 2-1.5: new full speed USB device number 4 using ehci_hcd [76940.766959] usb 2-1.5: New USB device found, idVendor=17ef, idProduct=1003 [76940.766965] usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [76940.766968] usb 2-1.5: Product: Integrated Smart Card Reader [76940.766971] usb 2-1.5: Manufacturer: Lenovo [76951.095076] smapi smapi: set_real_thresh: set start to 34 for bat=0 [76951.298559] smapi smapi: set_real_thresh: set stop to 90 for bat=0 [76951.432821] ata1.00: configured for UDMA/100 [76951.432828] ata1: EH complete [76951.539417] udevd[27831]: starting version 171 [76955.166621] usb 2-1.4: USB disconnect, device number 3 [76955.166749] qcserial ttyUSB0: Qualcomm USB modem converter now disconnected from ttyUSB0 [76955.166760] drivers/usb/serial/qcserial.c: qc_release [76955.166770] qcserial 2-1.4:1.1: device disconnected [76956.364882] usb 2-1.4: new high speed USB device number 5 using ehci_hcd [76956.451649] usb 2-1.4: New USB device found, idVendor=05c6, idProduct=9205 [76956.451655] usb 2-1.4: New USB device strings: Mfr=3, Product=2, SerialNumber=0 [76956.451658] usb 2-1.4: Product: Qualcomm Gobi 2000 [76956.451660] usb 2-1.4: Manufacturer: Qualcomm Incorporated [76956.453444] drivers/usb/serial/qcserial.c: qcprobe [76956.453447] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [76956.453449] drivers/usb/serial/qcserial.c: This Interface = 0 [76956.453537] drivers/usb/serial/qcserial.c: qcprobe [76956.453539] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [76956.453541] drivers/usb/serial/qcserial.c: This Interface = 1 [76956.453543] drivers/usb/serial/qcserial.c: Diagnostics Monitor found [76956.454045] qcserial 2-1.4:1.1: Qualcomm USB modem converter detected [76956.454124] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB0 [76956.454167] drivers/usb/serial/qcserial.c: qcprobe [76956.454169] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [76956.454171] drivers/usb/serial/qcserial.c: This Interface = 2 [76956.454173] drivers/usb/serial/qcserial.c: Modem port found [76956.454933] qcserial 2-1.4:1.2: Qualcomm USB modem converter detected [76956.454999] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB1 [76956.455043] drivers/usb/serial/qcserial.c: qcprobe [76956.455045] drivers/usb/serial/qcserial.c: Num Interfaces = 4 [76956.455047] drivers/usb/serial/qcserial.c: This Interface = 3 [76956.455050] drivers/usb/serial/qcserial.c: NMEA GPS interface found [76956.455540] qcserial 2-1.4:1.3: Qualcomm USB modem converter detected [76956.455605] usb 2-1.4: Qualcomm USB modem converter now attached to ttyUSB2 [77206.484909] ADDRCONF(NETDEV_UP): wlan0: link is not ready [77265.005601] ADDRCONF(NETDEV_UP): wlan0: link is not ready [77265.242588] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [77265.294446] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X [77265.295595] ADDRCONF(NETDEV_UP): eth0: link is not ready [77265.416383] ADDRCONF(NETDEV_UP): wlan0: link is not ready [77267.603275] wlan0: authenticate with 00:24:fe:06:70:b7 (try 1) [77267.605288] wlan0: authenticated [77267.605372] wlan0: associate with 00:24:fe:06:70:b7 (try 1) [77267.612073] wlan0: RX AssocResp from 00:24:fe:06:70:b7 (capab=0x411 status=0 aid=2) [77267.612077] wlan0: associated [77267.616291] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [77278.541773] wlan0: no IPv6 routers present
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02) Subsystem: Lenovo Device 2193 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 00002000-00002fff Memory behind bridge: cc000000-cdefffff Prefetchable memory behind bridge: 00000000ce000000-00000000dfffffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) Subsystem: Lenovo Device 215f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: Memory at f2427800 (64-bit, non-prefetchable) [size=16] Capabilities: <access denied> 00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06) Subsystem: Lenovo Device 2153 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 42 Region 0: Memory at f2400000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at f2425000 (32-bit, non-prefetchable) [size=4K] Region 2: I/O ports at 1820 [size=32] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 2163 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 23 Region 0: Memory at f2428000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) Subsystem: Lenovo Device 215e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 43 Region 0: Memory at f2420000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: f2000000-f20fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0000000-f1ffffff Prefetchable memory behind bridge: 00000000f2500000-00000000f25fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0 Memory behind bridge: f2100000-f21fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI]) Subsystem: Lenovo Device 2163 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 19 Region 0: Memory at f2428400 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) Subsystem: Lenovo Device 2166 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) (prog-if 01 [AHCI 1.0]) Subsystem: Lenovo Device 2168 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin B routed to IRQ 41 Region 0: I/O ports at 1818 [size=8] Region 1: I/O ports at 180c [size=4] Region 2: I/O ports at 1810 [size=8] Region 3: I/O ports at 1808 [size=4] Region 4: I/O ports at 1840 [size=32] Region 5: Memory at f2427000 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) Subsystem: Lenovo Device 2167 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 23 Region 0: Memory at f2428800 (64-bit, non-prefetchable) [size=256] Region 4: I/O ports at 1860 [size=32] Kernel driver in use: i801_smbus Kernel modules: i2c-i801 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) Subsystem: Lenovo Device 2190 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin D routed to IRQ 19 Region 0: Memory at f2426000 (64-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: intel ips Kernel modules: intel_ips 01:00.0 VGA compatible controller: nVidia Corporation GT218 [NVS 3100M] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Lenovo Device 215c Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 45 Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M] Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M] Region 5: I/O ports at 2000 [size=128] [virtual] Expansion ROM at cd000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nouveau 01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) Subsystem: Lenovo Device 218f Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at cdefc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel 03:00.0 Network controller: Intel Corporation Centrino Ultimate-N 6300 (rev 35) Subsystem: Intel Corporation Centrino Ultimate-N 6300 3x3 AGN Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlagn Kernel modules: iwlagn 0d:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller (rev 01) Subsystem: Lenovo Device 2133 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f2100000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci 0d:00.1 System peripheral: Ricoh Co Ltd Memory Stick Host Controller (rev 01) Subsystem: Lenovo Device 2134 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at f2100400 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> 0d:00.3 FireWire (IEEE 1394): Ricoh Co Ltd FireWire Host Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Lenovo Device 2136 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin D routed to IRQ 10 Region 0: Memory at f2100800 (32-bit, non-prefetchable) [size=2K] Capabilities: <access denied> ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) Subsystem: Lenovo Device 2196 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) Subsystem: Lenovo Device 2196 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) Subsystem: Lenovo Device 2196 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) Subsystem: Lenovo Device 2196 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Lenovo Device 2196 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) Subsystem: Lenovo Device 2196 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0
CPU0 CPU1 CPU2 CPU3 0: 297 35 49 45 IO-APIC-edge timer 1: 29289 2760 2831 2778 IO-APIC-edge i8042 8: 25 20 22 23 IO-APIC-edge rtc0 9: 958099 201301 201355 201264 IO-APIC-fasteoi acpi 12: 6 1 1 1 IO-APIC-edge i8042 16: 15 12 18 15 IO-APIC-fasteoi hda_intel, mmc0 19: 10086 26 35 23 IO-APIC-fasteoi ips, ehci_hcd:usb2 23: 46823 79863 55579 50414 IO-APIC-fasteoi ehci_hcd:usb1 41: 481244 71758 71708 71786 PCI-MSI-edge ahci 42: 945 2740 1873 1634 PCI-MSI-edge eth0 43: 88306 280938 139215 104281 PCI-MSI-edge hda_intel 44: 2112521 420940 422471 421806 PCI-MSI-edge iwlagn 45: 24023 64165 51583 33809 PCI-MSI-edge nvidia NMI: 0 0 0 0 Non-maskable interrupts LOC: 97096018 94894657 100359537 99741220 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts PMI: 0 0 0 0 Performance monitoring interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 2224790 3732132 1161795 1021567 Rescheduling interrupts CAL: 2032239 1512187 1121241 1016947 Function call interrupts TLB: 40624 45485 42765 42159 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 312 311 311 311 Machine check polls ERR: 0 MIS: 0
uhci_hcd 19256 0 - Live 0xf8512000 sdhci_pci 6703 0 - Live 0xf84d8000 sdhci 14975 1 sdhci_pci, Live 0xf84cc000 mmc_block 8037 0 - Live 0xf845f000 mmc_core 57109 2 sdhci,mmc_block, Live 0xf84aa000 ehci_hcd 34479 0 - Live 0xf8470000 usb_storage 28135 0 - Live 0xfa508000 usbmon 15729 0 - Live 0xfa4f0000 usblp 9095 0 - Live 0xfa4e0000 tun 12472 0 - Live 0xfa4bc000 tp_smapi 15504 0 - Live 0xfa4ab000 thinkpad_ec 3995 1 tp_smapi, Live 0xfa497000 snd_seq_oss 23584 0 - Live 0xfa485000 snd_seq_midi_event 4368 1 snd_seq_oss, Live 0xfa473000 snd_seq_dummy 983 0 - Live 0xfa469000 snd_seq 39328 5 snd_seq_oss,snd_seq_midi_event,snd_seq_dummy, Live 0xfa453000 snd_seq_device 4172 3 snd_seq_oss,snd_seq_dummy,snd_seq, Live 0xfa43b000 snd_pcm_oss 33152 0 - Live 0xfa427000 snd_mixer_oss 12248 1 snd_pcm_oss, Live 0xfa412000 snd_hrtimer 1200 0 - Live 0xfa405000 snd_aloop 11092 0 - Live 0xfa3f8000 sbs 8805 0 - Live 0xfa3e9000 sbshc 2664 1 sbs, Live 0xfa3dd000 ohci_hcd 19178 0 - Live 0xfa3ce000 msr 2016 0 - Live 0xfa3bf000 joydev 7407 0 - Live 0xfa3a6000 fuse 57109 3 - Live 0xfa389000 fan 1790 0 - Live 0xfa36d000 display 2167 0 - Live 0xfa363000 coretemp 4222 0 - Live 0xfa358000 cdc_acm 13553 0 - Live 0xfa349000 btusb 9681 0 - Live 0xfa337000 bluetooth 112005 1 btusb, Live 0xfa30a000 acpi_cpufreq 4869 1 - Live 0xfa2db000 mperf 883 1 acpi_cpufreq, Live 0xfa2d0000 uvcvideo 54357 0 - Live 0xfa2b8000 qcserial 3338 0 - Live 0xfa28f000 usb_wwan 7590 1 qcserial, Live 0xfa263000 usbserial 23879 2 qcserial,usb_wwan, Live 0xfa20f000 videodev 68079 1 uvcvideo, Live 0xfa1c6000 usbhid 22087 0 - Live 0xfa13b000 nvidia 10504894 85 - Live 0xf956d000 (P) iwlagn 325564 0 - Live 0xf897e000 snd_hda_codec_conexant 33612 1 - Live 0xf88cd000 snd_hda_intel 18465 4 - Live 0xf889e000 mac80211 159579 1 iwlagn, Live 0xf8802000 snd_hda_codec 47828 2 snd_hda_codec_conexant,snd_hda_intel, Live 0xf885e000 sr_mod 12380 0 - Live 0xf87c0000 snd_hwdep 4447 1 snd_hda_codec, Live 0xf87ab000 snd_pcm 57369 5 snd_pcm_oss,snd_aloop,snd_hda_intel,snd_hda_codec, Live 0xf8778000 snd_timer 14975 4 snd_seq,snd_hrtimer,snd_pcm, Live 0xf8744000 processor 20996 1 acpi_cpufreq, Live 0xf8686000 button 3470 0 - Live 0xf8650000 cfg80211 124594 2 iwlagn,mac80211, Live 0xf860d000 i2c_i801 6235 0 - Live 0xf863d000 cdrom 30607 1 sr_mod, Live 0xf85ac000 pcspkr 1327 0 - Live 0xf8599000 intel_ips 9392 0 - Live 0xf858d000 battery 8529 0 - Live 0xf857f000 snd_page_alloc 5757 2 snd_hda_intel,snd_pcm, Live 0xf856e000 ac 2393 0 - Live 0xf8557000 thermal 6355 0 - Live 0xf854b000 e1000e 123512 0 - Live 0xf84dd000 thinkpad_acpi 52675 0 - Live 0xf849b000 wmi 6927 0 - Live 0xf8449000
_______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
