AHCI driver problem on ICH (Re: AHCI driver problem on SB700/SB800 w/ Acer Ferrari One)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 12 May 2011 00:25:34 +0200
"Rafael J. Wysocki" <rjw@xxxxxxx> wrote:

> There seems to be a problem on my Acer box which is related to DIPM
> and switching the power source.  Namely, when I detach the AC adapter
> from the machine, the disk (which is an Intel SSD) freezes for a
> while and something like this appears in dmesg:
[...]

Since updating to 2.6.39-rc7 (from 2.6.38.x) I have similar problems
with two notebooks using Intel ICH:

Acer PTZ1825
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI
Controller (rev 03) (prog-if 01 [AHCI 1.0]) Subsystem: Acer
Incorporated [ALI] Device 0300 Flags: bus master, 66MHz, medium devsel,
latency 0, IRQ 42 I/O ports at 30e8 [size=8]
        I/O ports at 30fc [size=4]
        I/O ports at 30e0 [size=8]
        I/O ports at 30f8 [size=4]
        I/O ports at 3020 [size=32]
        Memory at d4504000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
        Capabilities: [70] Power Management version 3
        Capabilities: [a8] SATA HBA v1.0
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ahci


Dell Latitude E6510
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset
6 port SATA AHCI Cont roller (rev 05) (prog-if 01 [AHCI 1.0])
        Subsystem: Dell Device 040b
        Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 41
        I/O ports at 8090 [size=8]
        I/O ports at 8080 [size=4]
        I/O ports at 8070 [size=8]
        I/O ports at 8060 [size=4]
        I/O ports at 8020 [size=32]
        Memory at e9640000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
        Capabilities: [70] Power Management version 3
        Capabilities: [a8] SATA HBA v1.0
        Capabilities: [b0] PCI Advanced Features
        Kernel driver in use: ahci

Patch not tried yet (do not know / not looked into yet where to change
for this chipset).

Seems to be a 2.6.39-rcX regression?


-- 
MfG,

Michael Leun

_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm


[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux