Re: [PATCH v3 4/5] PM: Add visible HIBERNATION_INTERFACE and hide HIBERNATION

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tuesday, March 15, 2011, Shriram Rajagopalan wrote:
> 2011/3/15 Rafael J. Wysocki <rjw@xxxxxxx>:
> > Hi,
> >
> > Sorry, I didn't have the time to review the patch in detail before.
> >
> > On Saturday, March 12, 2011, Shriram Rajagopalan wrote:
> >> HIBERNATION covers the main hibernation control code and freeze-thaw
> >> pm events, that xen's save/restore also uses. Explicitly enabling
> >> an independant hibernation functionality to enable xen's save/restore
> >> is a bit ugly. Define a new user visible symbol HIBERNATION_INTERFACE
> >> that "selects" HIBERNATION and covers the main hibernation control code
> >> instead of HIBERNATION. This way, we can also make XEN_SAVE_RESTORE
> >> "select" HIBERNATION, enabling only the freeze-thaw code.
> >>
> >> Signed-off-by: Shriram Rajagopalan <rshriram@xxxxxxxxx>
> >> ---
> >>  kernel/power/Kconfig     |    9 +++++++--
> >>  kernel/power/hibernate.c |    4 ++++
> >>  kernel/power/main.c      |    2 +-
> >>  kernel/power/user.c      |    2 ++
> >>  4 files changed, 14 insertions(+), 3 deletions(-)
> >>
> >> diff --git a/kernel/power/Kconfig b/kernel/power/Kconfig
> >> index 4603f08..493c678 100644
> >> --- a/kernel/power/Kconfig
> >> +++ b/kernel/power/Kconfig
> >> @@ -19,10 +19,15 @@ config SUSPEND_FREEZER
> >>         Turning OFF this setting is NOT recommended! If in doubt, say Y.
> >>
> >>  config HIBERNATION
> >> -     bool "Hibernation (aka 'suspend to disk')"
> >> -     depends on SWAP && ARCH_HIBERNATION_POSSIBLE
> >> +     def_bool n
> >
> > You don't need that.  Simply use "bool"
> >
> >> +     depends on ARCH_HIBERNATION_POSSIBLE
> >
> > That need not depend on it, HIBERNATION_INTERFACE should instead.
> >
> Does that mean the pm_ops interface does not depend on the ARCH_HIB.. ?

That's as far as I remember, but no, it only depends on HIBERNATION.

> >>       select LZO_COMPRESS
> >>       select LZO_DECOMPRESS
> >
> > These two selects may be moved to HIBERNATION_INTERFACE too.
> >
> >> +
> >> +config HIBERNATION_INTERFACE
> >> +     bool "Hibernation (aka 'suspend to disk')"
> >> +     depends on SWAP
> >> +     select HIBERNATION
> >>       ---help---
> >>         Enable the suspend to disk (STD) functionality, which is usually
> >>         called "hibernation" in user interfaces.  STD checkpoints the
> >> diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c
> >> index 1832bd2..13bcf69 100644
> >> --- a/kernel/power/hibernate.c
> >> +++ b/kernel/power/hibernate.c
> >> @@ -592,6 +592,7 @@ static int prepare_processes(void)
> >>   *   hibernate - The granpappy of the built-in hibernation management
> >>   */
> >>
> >> +#ifdef CONFIG_HIBERNATION_INTERFACE
> >
> > Please don't do that.  Please make the whole hibernate.c depend on
> > CONFIG_HIBERNATION_INTERFACE.
> >
> This #if only wraps the hibernate() function. There is a whole lot of code
> (global functions too) before the hibernate() function.
> 
> As i mentioned in the first email 0/5, simply making
> hibernate.c and user.c depend on HIBERNATION_INTERFACE does not work.
> 
> I got the following linker errors.
> 
> kernel/built-in.o: In function `sys_reboot':
> kernel/sys.c:440: undefined reference to `hibernate'
> kernel/built-in.o: In function `state_store':
> kernel/power/main.c:185: undefined reference to `hibernate'
> kernel/built-in.o: In function `hibernate_preallocate_memory':
> kernel/power/snapshot.c:1411: undefined reference to `swsusp_show_speed'
> kernel/built-in.o: In function `swsusp_check':
> kernel/power/swap.c:933: undefined reference to `swsusp_resume_device'
> kernel/power/swap.c:938: undefined reference to `swsusp_resume_block'
> kernel/power/swap.c:946: undefined reference to `swsusp_resume_block'
> kernel/built-in.o: In function `load_image_lzo':
> kernel/power/swap.c:878: undefined reference to `swsusp_show_speed'
> kernel/built-in.o: In function `load_image':
> kernel/power/swap.c:741: undefined reference to `swsusp_show_speed'
> kernel/built-in.o: In function `save_image_lzo':
> kernel/power/swap.c:502: undefined reference to `lzo1x_1_compress'
> kernel/power/swap.c:543: undefined reference to `swsusp_show_speed'
> kernel/built-in.o: In function `swsusp_swap_check':
> kernel/power/swap.c:221: undefined reference to `swsusp_resume_block'
> kernel/power/swap.c:221: undefined reference to `swsusp_resume_device'
> kernel/built-in.o: In function `mark_swapfiles':
> kernel/power/swap.c:195: undefined reference to `swsusp_resume_block'
> kernel/power/swap.c:202: undefined reference to `swsusp_resume_block'
> kernel/built-in.o: In function `save_image':
> kernel/power/swap.c:418: undefined reference to `swsusp_show_speed'
> drivers/built-in.o: In function `acpi_suspend':
> drivers/acpi/sleep.c:584: undefined reference to `hibernate'
> drivers/built-in.o: In function `ata_scsi_start_stop_xlat':
> drivers/ata/libata-scsi.c:1331: undefined reference to
> `system_entering_hibernation'
> drivers/built-in.o: In function `acpi_sleep_init':
> drivers/acpi/sleep.c:782: undefined reference to `hibernation_set_ops'
> arch/x86/power/built-in.o: In function `restore_registers':
> arch/x86/power/hibernate_asm_64.S:145: undefined reference to `in_suspend'
> 
> Seeing errors from arch/.. was also the reason why I made HIBERNATE depend on
> ARCH_HIBERNATION_POSSIBLE

Well, all of those things above are fixable.

Basically, I can do the patch for you, but that'll take some time.
Stay tuned. :-)

Thanks,
Rafael
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm


[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux