From: Rafael J. Wysocki <rjw@xxxxxxx> The tg3 driver uses device_init_wakeup() in such a way that the device's power.can_wakeup flag may be set even though the PCI subsystem cleared it before, in which case the device cannot wake up the system from sleep states. Modify the driver to only change the power.can_wakeup flag if the device is not capable of generating wakeup signals. Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx> --- drivers/net/tg3.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) Index: linux-2.6/drivers/net/tg3.c =================================================================== --- linux-2.6.orig/drivers/net/tg3.c +++ linux-2.6/drivers/net/tg3.c @@ -12403,9 +12403,11 @@ static void __devinit tg3_get_eeprom_hw_ tp->tg3_flags3 |= TG3_FLG3_RGMII_EXT_IBND_TX_EN; } done: - device_init_wakeup(&tp->pdev->dev, tp->tg3_flags & TG3_FLAG_WOL_CAP); - device_set_wakeup_enable(&tp->pdev->dev, + if (tp->tg3_flags & TG3_FLAG_WOL_CAP) + device_set_wakeup_enable(&tp->pdev->dev, tp->tg3_flags & TG3_FLAG_WOL_ENABLE); + else + device_set_wakeup_capable(&tp->pdev->dev, false); } static int __devinit tg3_issue_otp_command(struct tg3 *tp, u32 cmd) _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
