On Tuesday, December 28, 2010, Ohad Ben-Cohen wrote: > On Sun, Dec 26, 2010 at 8:37 PM, Rafael J. Wysocki <rjw@xxxxxxx> wrote: > > So, it only happens during asynchronous suspend? In other words, if suspend > > is synchronous, everything should be fine, right? > > Not necessarily. So it's not a race after all, is it? > Consider this simple scenario, where a device was added after the mmc > host controller, but before mac80211. In this case its suspend handler > will have the chance to abort system suspend after mac80211 already > told our driver to power down the device (but the device wasn't > powered down yet, because the driver used pm_runtime_put_sync() which > is disabled). Well, first, you shouldn't rely on pm_runtime_put_sync() to actually _suspend_ the device at any point. What it does is to call pm_runtime_idle() for the device, which isn't guaranteed to suspend it. If you want the device to be suspended, you should use pm_runtime_put_noidle(device); pm_runtime_suspend(device); or, alternatively pm_runtime_put_sync_suspend(device); (which equivalent to the above pair of callbacks, but is not available in kernels prior to 2.6.37-rc1). Second, what you'd really want to do (I guess) is: pm_runtime_put_noidle(device); device->bus->pm->runtime_suspend(device); (I have omitted all of the usual checks for simplicity), because that would _unconditionally_ put your device into a low-power state. No? The problem is at this point the PM core will think the device is still RPM_ACTIVE, so it will be necessary to additionally do something like: pm_runtime_disable(device); pm_runtime_set_suspended(device); pm_runtime_enable(device); Of course, you'll need to ensure there are no races between that and any other code path that may want to resume the device simultaneously. And here it backfires, because you have to synchronize not only with runtime resume, but also with system suspend and possibly resume. Rafael _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
