On Thursday, December 23, 2010, Thomas Fjellstrom wrote:
> On December 22, 2010, Rafael J. Wysocki wrote:
> > On Wednesday, December 15, 2010, Thomas Fjellstrom wrote:
> > > I can't seem to get wol to work with my desktop, which has an integrated
> > > ATL1 GbE nic. I can't be absolutely sure if it ever worked, but I think
> > > it did at one point. I can use ethtool to look at the wol status, that
> > > it supports magic-packet wol, and I can enable it, which is done at boot
> > > using an init script. But No matter how many times I try to send a wol
> > > packet to that machine it never wakes up.
> > >
> > > Looking around on the net seems to say it is supported, and should work,
> > > but I'm not having any luck. Anyone have any hints?
> >
> > It works for me with 2.6.37-rc7 and the appended patch applied (at least
> > the machine is woken up from suspend to RAM). Of course, the adapter
> > needs to be configured for that with the help of ethtool.
>
> Hi, thanks for making quick work of this. I have one slight problem, my nic
> seems to use the atl1 driver, and not atl1c. I've tried using atl1c and atl1e,
> both will load if I modprobe them, but neither actually bring up the device.
> Even tried blacklisting atl1 first.
I see.
Please try the patch below, then. It's analogous to the atl1c one, but
it's untested (builds for me).
Thanks,
Rafael
---
drivers/net/atlx/atl1.c | 77 +++++++++++++++++++-----------------------------
1 file changed, 31 insertions(+), 46 deletions(-)
Index: linux-2.6/drivers/net/atlx/atl1.c
===================================================================
--- linux-2.6.orig/drivers/net/atlx/atl1.c
+++ linux-2.6/drivers/net/atlx/atl1.c
@@ -950,6 +950,7 @@ static int __devinit atl1_sw_init(struct
hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;
adapter->wol = 0;
+ device_set_wakeup_enable(&adapter->pdev->dev, false);
adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
adapter->ict = 50000; /* 100ms */
adapter->link_speed = SPEED_0; /* hardware init */
@@ -2735,15 +2736,15 @@ static int atl1_close(struct net_device
}
#ifdef CONFIG_PM
-static int atl1_suspend(struct pci_dev *pdev, pm_message_t state)
+static int atl1_suspend(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1_adapter *adapter = netdev_priv(netdev);
struct atl1_hw *hw = &adapter->hw;
u32 ctrl = 0;
u32 wufc = adapter->wol;
u32 val;
- int retval;
u16 speed;
u16 duplex;
@@ -2751,17 +2752,15 @@ static int atl1_suspend(struct pci_dev *
if (netif_running(netdev))
atl1_down(adapter);
- retval = pci_save_state(pdev);
- if (retval)
- return retval;
-
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
val = ctrl & BMSR_LSTATUS;
if (val)
wufc &= ~ATLX_WUFC_LNKC;
+ if (!wufc)
+ goto disable_wol;
- if (val && wufc) {
+ if (val) {
val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
if (val) {
if (netif_msg_ifdown(adapter))
@@ -2798,23 +2797,18 @@ static int atl1_suspend(struct pci_dev *
ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
-
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
- goto exit;
- }
-
- if (!val && wufc) {
+ } else {
ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
ioread32(hw->hw_addr + REG_WOL_CTRL);
iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
ioread32(hw->hw_addr + REG_MAC_CTRL);
hw->phy_configured = false;
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 1);
- goto exit;
}
-disable_wol:
+ return 0;
+
+ disable_wol:
iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
ioread32(hw->hw_addr + REG_WOL_CTRL);
ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
@@ -2822,37 +2816,17 @@ disable_wol:
iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
hw->phy_configured = false;
- pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
-exit:
- if (netif_running(netdev))
- pci_disable_msi(adapter->pdev);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
return 0;
}
-static int atl1_resume(struct pci_dev *pdev)
+static int atl1_resume(struct device *dev)
{
+ struct pci_dev *pdev = to_pci_dev(dev);
struct net_device *netdev = pci_get_drvdata(pdev);
struct atl1_adapter *adapter = netdev_priv(netdev);
- u32 err;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
-
- err = pci_enable_device(pdev);
- if (err) {
- if (netif_msg_ifup(adapter))
- dev_printk(KERN_DEBUG, &pdev->dev,
- "error enabling pci device\n");
- return err;
- }
-
- pci_set_master(pdev);
iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
atl1_reset_hw(&adapter->hw);
@@ -2864,16 +2838,25 @@ static int atl1_resume(struct pci_dev *p
return 0;
}
+
+static SIMPLE_DEV_PM_OPS(atl1_pm_ops, atl1_suspend, atl1_resume);
+#define ATL1_PM_OPS (&atl1_pm_ops)
+
#else
-#define atl1_suspend NULL
-#define atl1_resume NULL
+
+static int atl1_suspend(struct device *dev) { return 0; }
+
+#define ATL1_PM_OPS NULL
#endif
static void atl1_shutdown(struct pci_dev *pdev)
{
-#ifdef CONFIG_PM
- atl1_suspend(pdev, PMSG_SUSPEND);
-#endif
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct atl1_adapter *adapter = netdev_priv(netdev);
+
+ atl1_suspend(&pdev->dev);
+ pci_wake_from_d3(pdev, adapter->wol);
+ pci_set_power_state(pdev, PCI_D3hot);
}
#ifdef CONFIG_NET_POLL_CONTROLLER
@@ -3117,9 +3100,8 @@ static struct pci_driver atl1_driver = {
.id_table = atl1_pci_tbl,
.probe = atl1_probe,
.remove = __devexit_p(atl1_remove),
- .suspend = atl1_suspend,
- .resume = atl1_resume,
- .shutdown = atl1_shutdown
+ .shutdown = atl1_shutdown,
+ .driver.pm = ATL1_PM_OPS,
};
/*
@@ -3409,6 +3391,9 @@ static int atl1_set_wol(struct net_devic
adapter->wol = 0;
if (wol->wolopts & WAKE_MAGIC)
adapter->wol |= ATLX_WUFC_MAG;
+
+ device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
+
return 0;
}
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
