From: Len Brown <len.brown@xxxxxxxxx> When the Lenovo Ideapad S10-3 is booted with HT enabled, it hits a boot hang in the intel_idle driver. This occurs when entering ATM-C4 for the first time, unless BM_STS is first cleared. acpi_idle doesn't see this because it first checks and clears BM_STS, but it would hit the same hang if that check were disabled. http://bugs.meego.com/show_bug.cgi?id=7093 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/634702 Signed-off-by: Len Brown <len.brown@xxxxxxxxx> --- drivers/pci/quirks.c | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+), 0 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 89ed181..857ae01 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -163,6 +163,26 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_2, quirk_isa_d DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs); /* + * Intel NM10 "TigerPoint" LPC PM1a_STS.BM_STS must be clear + * for some HT machines to use C4 w/o hanging. + */ +static void __devinit quirk_tigerpoint_bm_sts(struct pci_dev *dev) +{ + u32 pmbase; + u16 pm1a; + + pci_read_config_dword(dev, 0x40, &pmbase); + pmbase = pmbase & 0xff80; + pm1a = inw(pmbase); + + if (pm1a & 0x10) { + dev_info(&dev->dev, FW_BUG "TigerPoint LPC.BM_STS cleared\n"); + outw(0x10, pmbase); + } +} +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TGP_LPC, quirk_tigerpoint_bm_sts); + +/* * Chipsets where PCI->PCI transfers vanish or hang */ static void __devinit quirk_nopcipci(struct pci_dev *dev) -- 1.7.3.2.g9027fa _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
