On Thu, Feb 11, 2010 at 02:27:17PM +0100, Rafael J. Wysocki wrote: > On Thursday 11 February 2010, Gary Hade wrote: > > On Thu, Feb 11, 2010 at 01:56:54AM +0100, Rafael J. Wysocki wrote: > > > On Thursday 11 February 2010, Rafael J. Wysocki wrote: > > > > On Thursday 11 February 2010, Gary Hade wrote: > > > > > On Wed, Feb 10, 2010 at 11:58:00PM +0100, Rafael J. Wysocki wrote: > > > > > > On Wednesday 10 February 2010, Gary Hade wrote: > > > > ... > > > > > > > Yes, 6/9 also appeared to be the most likely suspect to me and > > > > > > > I was already doing what you asked except in the opposite order. > > > > > > > With 1/9 through 6/9 both the hot-add and hot-remove issues still > > > > > > > reproduced. After removing 6/9 both issues disappeared. > > > > > > > > > > > > Thanks for verifying, I've already started to look for bugs in it. > > > > > > > > > > Thanks! > > > > > > > > > > > > > > > > > What's your kernel command line, BTW? > > > > > > > > > > root=/dev/disk/by-id/scsi-35000c5000036ffcb-part7 ip=9.47.66.9:9.47.67.50:9.47.66.1:255.255.254.0 resume=/dev/disk/by-id/scsi-35000c50000370247-part3 crashkernel=256M-:128M console=tty0 console=ttyS0,115200 pci=use_crs pci=norom > > > > > > > > Thanks. We found a bug in the patch, but it would require you to use a > > > > specific command line switch to trigger, which you don't use. > > > > > > > > I'll let you know if I have anything to test. > > > > > > OK, please try the patch below on top of [1-6/9]. > > > > Sorry, it didn't help. The hot-add and hot-remove behaviors > > still look the same. > > Thanks for testing. > > Well, this time I found another real bug, which is that we should add > gpe_block->block_base_number to the GPE index within the block in order to > compute the GPE number. If there are GPE devices other than the FADT ones in > your system, that may explain the symptoms. > > Please try the patch below (on top of [1-6/9]). In case it doesn't help, please > look for "Failed to ebable GPE" messages in dmesg and let me know if there are > any. That one worked! It corrected both the blinking amber LED after hot-remove and acpiphp's failure to see the hot-add event. Now when you have patch(es) ready for Jesse's linux-next branch I can get back to my original mission of checking out Bjorn's _CRS enablement changes. Gary -- Gary Hade System x Enablement IBM Linux Technology Center 503-578-4503 IBM T/L: 775-4503 garyhade@xxxxxxxxxx http://www.ibm.com/linux/ltc _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
