[RFT] Input: speed up suspend/shutdown for PS/2 mice and keyboards

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

I am asking everyone to give this patch a try. It is reported to speed
up suspend process, however there is a risk that there are boxes out
there that do require full reset and I would prefer to know that sooner
than later.

Thanks!

-- 
Dmitry


Input: speed up suspend/shutdown for PS/2 mice and keyboards

Instead of doing full-blown reset while suspending or shutting down
the box use lighter form of reset that should take less time.

Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---

 drivers/input/keyboard/atkbd.c     |    5 +++--
 drivers/input/mouse/psmouse-base.c |    5 ++++-
 2 files changed, 7 insertions(+), 3 deletions(-)


diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index a357357..1f5e2ce 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -134,7 +134,8 @@ static const unsigned short atkbd_unxlate_table[128] = {
 #define ATKBD_CMD_GETID		0x02f2
 #define ATKBD_CMD_SETREP	0x10f3
 #define ATKBD_CMD_ENABLE	0x00f4
-#define ATKBD_CMD_RESET_DIS	0x00f5
+#define ATKBD_CMD_RESET_DIS	0x00f5	/* Reset to defaults and disable */
+#define ATKBD_CMD_RESET_DEF	0x00f6	/* Reset to defaults */
 #define ATKBD_CMD_SETALL_MBR	0x00fa
 #define ATKBD_CMD_RESET_BAT	0x02ff
 #define ATKBD_CMD_RESEND	0x00fe
@@ -836,7 +837,7 @@ static void atkbd_cleanup(struct serio *serio)
 	struct atkbd *atkbd = serio_get_drvdata(serio);
 
 	atkbd_disable(atkbd);
-	ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT);
+	ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_DEF);
 }
 
 
diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c
index fd0bc09..401ac6b 100644
--- a/drivers/input/mouse/psmouse-base.c
+++ b/drivers/input/mouse/psmouse-base.c
@@ -1137,7 +1137,10 @@ static void psmouse_cleanup(struct serio *serio)
 	if (psmouse->cleanup)
 		psmouse->cleanup(psmouse);
 
-	psmouse_reset(psmouse);
+/*
+ * Reset the mouse to defaults (bare PS/2 protocol).
+ */
+	ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_RESET_DIS);
 
 /*
  * Some boxes, such as HP nx7400, get terribly confused if mouse
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux