Re: Weird suspend/resume problem on HP nx6325 w/ openSUSE 11.2 w/ -rc8

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/21/09 15:15, Rafael J. Wysocki wrote:
Hi,

I'm not really sure where this should be reported, but here it goes.

After installing openSUSE 11.2 on my testbed nx6325 I noticed that resume
(from suspend to RAM) stopped working on it.  Apparently, it hanged while
switching from the console back to X and the box remained completely
unresponsive after that (it didn't even react to the magic sysrq).  However,
it used to work just fine with -rc7 and openSUSE 11.1, so I figured the problem
was related to the new X driver, which is radeon module version 6.12.4 (xorg
server 1.6.5).

So, I started to investigate and found that after a suspend from a framebuffer
console, the resume had always worked.  However, when I switched from X to the
framebuffer console, suspended, resumed and switched back to X, the box hanged
immediately just like during resume after a suspend from under X.  [There also
were some problems when switching from X to the framebuffer console and back
which seemd to be independent of suspend/resume (in short, the screen stays
black after a switch from the framebuffer console to X and you need to kill X
to fix this).]

Later, however, I discovered that if the box was booted into runlevel 3, then
suspended to RAM and resumed, and then switched to runlevel 5, I could log
into X and suspend/resume without any problems for many times.  OTOH, after
booting directly into X, the first attempt to resume always resulted in a black
screen and a hard hang.

I wonder what's up in there.

[Hibernation/resume works 100% of the time AFAICS.]

Thanks,
Rafael
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

  
I just noticed today that on my macbook(radeon) using
s2ram works, but I get a long pause(black screen) before
the screen shows up.(latest stable release works fine).

Justin P. Mattock

_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux