On Monday 09 November 2009, Rafael J. Wysocki wrote: > On Monday 09 November 2009, Thomas Gleixner wrote: > > On Mon, 9 Nov 2009, Rafael J. Wysocki wrote: > > > > > On Monday 09 November 2009, Mike Galbraith wrote: > > > > On Mon, 2009-11-09 at 16:47 +0100, Rafael J. Wysocki wrote: > > > > > On Monday 09 November 2009, Mike Galbraith wrote: > > > > > > > > > > > Very likely. What did you do to fix it? > > > > > > > > > > > > You don't really wanna know. In 31 with newidle enabled, the below > > > > > > fixed it. It won't fix 32, though it might cure the resume problem. > > > > > > > > > > OK, I'll give it a try. > > > > > > It doesn't help. > > > > > > Also, I can reproduce the issue with current -git and kernel preepmtion > > > disabled. > > > > > > > I just tried to trigger badness via high speed online/offline combined > > > > with taskset with CONFIG_PREEMPT enabled, and couldn't make it explode. > > > > > > I'm not able to do it this way too, so resume seems to be necessary to trigger > > > it. I'm going try with the suspend debug in the "core" mode. > > > > > > > (damn, wish i could s2ram this box) > > > > > > That need not suffice. I have two other boxes that suspend and resume > > > correctly with 2.6.32-rc, AFAICS. > > > > > > However, there seems to be a systematic error somewhere, since the failure > > > always happens at the same place, ie. list_del_init(cwq->worklist.next); in > > > run_workqueue(), in preemptible as well as in non-preemptible kernels. > > > > > > Which is kind of strange, given the !list_empty(&cwq->worklist) test right > > > before it. > > > > Does that happen before or after the secondary CPU has been brought up ? > > Way after. It seems to happen more-or-less during or right after the thawing > of tasks. > > Moreover, the call trace I get is (manual transcription): OK, below is the full call trace I found in the kernel log. [ 51.520183] PM: Finishing wakeup. [ 51.520186] Restarting tasks ... [ 51.520387] usb 5-2: USB disconnect, address 2 [ 51.544197] done. [ 52.013018] general protection fault: 0000 [#1] PREEMPT SMP [ 52.013431] last sysfs file: /sys/devices/pci0000:00/0000:00:1d.0/usb1/1-2/1-2:1.3/ttyUSB3/port_number [ 52.013700] CPU 0 [ 52.013900] Modules linked in: ip6t_LOG af_packet xt_tcpudp xt_pkttype ipt_LOG xt_limit bnep sco rfcomm l2cap crc16 snd_pcm_oss snd_mixer_oss snd_seq binfmt_misc snd_seq_device ip6t_REJECT nf_conntrack_ipv6 ip6table_raw xt_NOTRACK ipt_REJECT xt_state iptable_raw iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4 cpufreq_conservative nf_conntrack nf_defrag_ipv4 cpufreq_ondemand ip_tables cpufreq_userspace cpufreq_powersave acpi_cpufreq ip6table_filter ip6_tables x_tables freq_table ipv6 microcode fuse loop sr_mod cdrom dm_mod arc4 ecb btusb snd_hda_codec_realtek bluetooth iwlagn snd_hda_intel snd_hda_codec iwlcore pcmcia snd_hwdep snd_pcm sdhci_pci mac80211 snd_timer joydev sdhci toshiba_acpi yenta_socket usbhid cfg80211 snd option rtc_cmos mmc_core firewire_ohci video rsrc_nonstatic psmouse firewire_core backlight soundcore iTCO_wdt rtc_core hid battery ac intel_agp button usb_storage snd_page_alloc usbserial rfkill pcmcia_core iTCO_vendor_support e1! 000e rtc_lib led_class serio_raw crc_itu_t output uinput sg ehci_hcd uhci_hcd sd_mod crc_t10dif usbcore ext3 jbd fan ahci libata thermal processor [ 52.016961] Pid: 9, comm: events/0 Not tainted 2.6.32-rc6-tst #160 PORTEGE R500 [ 52.016961] RIP: 0010:[<ffffffff81054bff>] [<ffffffff81054bff>] worker_thread+0x15b/0x22a [ 52.016961] RSP: 0018:ffff88007f0d9e40 EFLAGS: 00010046 [ 52.016961] RAX: ffff88007e056b68 RBX: ffff88007f09bd48 RCX: 6b6b6b6b6b6b6b6b [ 52.016961] RDX: 6b6b6b6b6b6b6b6b RSI: 0000000000000000 RDI: ffff880001613d00 [ 52.016961] RBP: ffff88007f0d9ee0 R08: ffff88007f0b9178 R09: ffff88007f0d9e10 [ 52.016961] R10: ffff880001613d00 R11: 0000000000000001 R12: ffff88007e056b60 [ 52.016961] R13: ffff880001613d00 R14: ffff88007f0b9140 R15: ffff88007f0b9140 [ 52.016961] FS: 0000000000000000(0000) GS:ffff880001600000(0000) knlGS:0000000000000000 [ 52.016961] CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b [ 52.016961] CR2: 00007f786667d060 CR3: 0000000001001000 CR4: 00000000000006f0 [ 52.016961] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 52.016961] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 52.016961] Process events/0 (pid: 9, threadinfo ffff88007f0d8000, task ffff88007f0b9140) [ 52.016961] Stack: [ 52.016961] 000000000000c918 ffff88007f0b9578 ffff88007f0d9fd8 ffff88007f0b9140 [ 52.016961] <0> ffff880001613d08 ffff88007f0b9140 ffff880001613d18 6b6b6b6b6b6b6b6b [ 52.016961] <0> 0000000000000000 ffff88007f0b9140 ffffffff81058281 ffff88007f0d9e98 [ 52.016961] Call Trace: [ 52.016961] [<ffffffff81058281>] ? autoremove_wake_function+0x0/0x38 [ 52.016961] [<ffffffff81054aa4>] ? worker_thread+0x0/0x22a [ 52.016961] [<ffffffff8105805a>] kthread+0x69/0x71 [ 52.016961] [<ffffffff8100c16a>] child_rip+0xa/0x20 [ 52.016961] [<ffffffff81057ff1>] ? kthread+0x0/0x71 [ 52.016961] [<ffffffff8100c160>] ? child_rip+0x0/0x20 [ 52.016961] Code: 74 12 4c 89 e6 4c 89 f7 ff 13 48 83 c3 08 48 83 3b 00 eb ec e8 3d ef ff ff 49 8b 45 08 4d 89 65 30 4c 89 ef 48 8b 08 48 8b 50 08 <48> 89 51 08 48 89 0a 48 89 40 08 48 89 00 e8 f6 11 24 00 49 8b [ 52.016961] RIP [<ffffffff81054bff>] worker_thread+0x15b/0x22a [ 52.016961] RSP <ffff88007f0d9e40> [ 52.016961] ---[ end trace 1d831fad17e9eb5d ]--- [ 52.016961] note: events/0[9] exited with preempt_count 1 So, this actually is a general protection fault that killed events and it happened exactly in list_del_init(cwq->worklist.next); in run_workqueue(). Thanks, Rafael _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
