On Saturday 22 August 2009, Maxim Levitsky wrote:
> Hi,
>
> <joke>
> This should be brought to a Microsoft antitrust case...
> </joke>
>
>
> Today many notebooks ship with a embedded infrared receiver.
> In Vista there is new subsystem that decodes these signals.
> (of course it works only with Microsoft Certificated Remotes (TM)...)
>
> The receiver is usually presented to system as a pnp device
> (using acpi tables)
>
> It turns out that some bioses actually use the OSI, ACPI feature of the
> operation system to detect if running inside Vista. If not they disable
> the infrared receiver.
Oh well.
That should've been Cced to linux-acpi (now added). I'm looking forward to
seeng a comment from Len.
> On my system this it is still tolerable:
>
> Device (MIR)
> {
> Name (_HID, EisaId ("ENE0100"))
> Method (_STA, 0, NotSerialized)
> {
> If (LGreaterEqual (OSYS, 0x07D6))
> {
> If (LOr (And (OTHR, 0x02), And (OTHR, 0x40)))
> {
> Return (0x00)
> }
> Else
> {
> Return (0x0F)
> }
> }
> Else
> {
> Return (0x00)
> }
> }
>
> But not so, on Mairo's system:
>
> Device (MIR)
> {
> Name (_HID, EisaId ("ENE0100"))
> Method (_STA, 0, NotSerialized)
> {
> If (LAnd (MCIR, LEqual (OSYS, 0x07D6)))
> {
> Return (0x0F)
> }
> Else
> {
> Store (Zero, ^^LPCB.IOR2)
> Return (Zero)
> }
> }
>
> .......
>
> Method (_WAK, 1, NotSerialized)
> {
> .......
> If (Not (LAnd (MCIR, LEqual (OSYS, 0x07D6))))
> {
> Store (Zero, \_SB.PCI0.LPCB.IOR2)
> }
>
>
> .....
>
> Scope (_SB)
> {
> Method (_INI, 0, NotSerialized)
> {
> If (DTSE)
> {
> TRAP (0x47)
> }
>
> Store (0x07D0, OSYS)
> If (CondRefOf (_OSI, Local0))
> {
> If (_OSI ("Linux"))
> {
> Store (One, LINX)
> Store (Zero, ECDY)
> }
>
> If (_OSI ("Windows 2001"))
> {
> Store (0x07D1, OSYS)
> }
>
> If (_OSI ("Windows 2001 SP1"))
> {
> Store (0x07D1, OSYS)
> }
>
> If (_OSI ("Windows 2001 SP2"))
> {
> Store (0x07D2, OSYS)
> }
>
> If (_OSI ("Windows 2006"))
> {
> Store (0x07D6, OSYS)
> }
>
> If (LEqual (TPMV, One))
> {
> If (LLessEqual (OSYS, 0x07D2))
> {
> TRAP (0x49)
> }
> }
> }
>
> If (LAnd (MPEN, LEqual (OSYS, 0x07D1)))
> {
> TRAP (0x3D)
> }
>
> TRAP (0x2B)
> }
> }
>
> We have tried to boot the system with acpi_osi="Windows 2006", but it
> didn't help (kernel log confirmed that this parameter was set)
>
> The only explanation I think of is ether his laptop is whitelisted on
> osi=Linux, or that _SB._INI is called by linux _after_ MIR._STA
> or that acpi_osi isn't yet in charge when _SB._INI is called.
>
>
> The kernel in question is quite recent kernel, (2.6.30.5 from debian
> unstable).
>
>
> The only way I managed to 'enable' this device is to
> do 'sudo setpci -s 00:1f.0 0x88.W=0x701'
>
> Or in other words undo the damage done by these ACPI commands.
>
> Mairo, can you boot the system with acpi=off, and then poke the cir IO
> range (0x700-0x703) ?
Best,
Rafael
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
