On Thursday 18 June 2009, Alan Stern wrote:
> On Thu, 18 Jun 2009, Rafael J. Wysocki wrote:
>
> > Not only then. The dev->power.depth counter was meant to be a "disable
> > everything" one, because there are situations in which we don't want even
> > resume to run (probe, release, system-wide suspend, hibernation, resume from
> > a system sleep state, possibly others).
> >
> > That said, I overlooked some problems related to it. So, I think to disable
> > the runtime PM of given device, it will be necessary to run a synchronous
> > runtime resume with taking a ref to block suspend.
>
> There should also be an async version, which increases depth while
> submitting a resume request.
>
> In fact, maybe it would be best if pm_request_resume always increments
> depth (unless it fails for some other reason) and __pm_runtime_resume
> increments depth whenever called synchronously. And likewise for the
> suspend paths.
And how exactly are we going to check if pm_request_resume() was successful?
We'd have to be able to do that in a code path different from the one that has
called pm_request_resume().
> > > Instead of a costly device_for_each_child(), would it be better to
> > > maintain a counter with the number of unsuspended children?
> >
> > Hmm. How exactly are we going to count them? The only way I see at the moment
> > would be to increase this number by one when running pm_runtime_init() for a
> > new child. Seems doable.
>
> That's right. You also have to decrement the number when an
> unsuspended child device is removed, obviously.
I forgot about that, so it is not done in the patch below.
BTW, is it just me, or are we overcomplicating that thing beyond any
reasonable limit?
I think I'll just do the device_for_each_child() for now, because IMO this
optimization isn't just worth complications resulting from it, because,
realistically, how many children is a parent going to have in a notmal system?
> The one thing to watch out for is what happens if a device is removed while
> its runtime_resume callback is running. :-)
I don't think it's possible.
> > > > + spin_lock(&dev->power.lock);
> > >
> > > Should be spin_lock_irq(). Same in other places.
> >
> > OK, I wasn't sure about that.
>
> The reasoning isn't complicated. If a spinlock can be taken by an
> interrupt handler (or any other code that might run in interrupt
> context) then you have the possibility of a deadlock as follows:
>
> spin_lock(&lock);
> <Interrupt occurs>
> irq_handler() {
> spin_lock(&lock);
>
> The handler can't acquire the lock because it is already in use, and
> it can't be released until the handler returns.
>
> As a result, if a spinlock is ever taken within an interrupt handler
> then it always has to be acquired with interrupts disabled.
> Similarly, if it is never taken within an interrupt handler but it is
> taken within a bottom-half routine, then it always has to be acquired
> with bottom halves disabled.
>
> > From the functionality point of view, nothing wrong happens if runtime suspend
> > fails as long as an error code is returned and the caller has to be prepared
> > for a failure anyway. Moreover, we never know why the resume is carried out,
> > so it's not clear whether it will be valid to carry out the suspend after that.
>
> Your first point certainly is correct. As for the second point, if
> whoever did the resume doesn't want the device suspended again, he
> should have incremented depth. So making the suspend wait until the
> resume is finished and then failing because the depth is positive
> would be a valid approach.
>
> However there's no use worrying about this until we have some real
> examples.
>
> > > > + spin_unlock(&dev->parent->power.lock);
> > > > +
> > > > + /* The device's parent is not active. Resume it and repeat. */
> > > > + error = __pm_runtime_resume(dev->parent, false);
> > > > + if (error)
> > > > + return error;
> > >
> > > Need to reset error to -EINVAL.
> >
> > Why -EINVAL?
>
> We have lost the context because of email trimming. Briefly, when you
> jump back to "repeat:", the code there expects error to have been
> initialized to -EINVAL. Some of the pathways will return error
> unchanged, expecting it to have that value.
>
> Alternatively, you could have those pathways set error and then you
> wouldn't have to initialize it. Either way.
Ah, OK
> > > The equivalent code in USB does this automatically. The
> > > runtime-disable routine does a resume if the depth value was
> > > originally 0,
> >
> > Yes, we should do that in general.
> >
> > > and the runtime-enable routine queues a delayed autosuspend request if the
> > > final depth value is 0.
> >
> > I don't like this.
>
> I guess this a question of how you view things. My view has been that
> whever depth (or pm_usage_cnt in the USB code) is 0, it means neither
> the driver nor anyone else has any reason to keep the device at full
> power. By definition, since that's what depth is -- a count of the
> reasons for not suspending.
>
> There might be some obscure other reason, but in general depth going
> to 0 means a delayed autosuspend request should be queued.
OK there, but pm_runtime_disable() is called by the core in some places where
we'd rather not want the device to be suspended (like during a system-wide
power transitions).
> Which reminds me... Something to think about: In an async call to
> __pm_runtime_suspend, if the runtime_suspend callback returns -EBUSY
> then perhaps your code should automatically requeue a new delayed
> autosuspend request. Which implies, of course, that the autosuspend
> delay has to be stored in the dev_pm_info structure. This isn't a bad
> thing, since exposing the value in sysfs gives userspace a consistent
> way to set the delay.
I think that functionality can be added later. Let's keep things as simple
as possible initially, or we won't be able to make any progress.
Below is a new version of the patch. Unfortunately, it is a major rework.
In short, I tried to address some of your recent comments and my observations.
It doesn't use depth any more, there's another counter (called resume_count)
instead, also playing the role of the RPM_GRACE bit from the previous version.
I've just finished it, so it may be still missing something apart from the
updating child_count on removal of an unsuspended child.
Best,
Rafael
---
From: Rafael J. Wysocki <rjw@xxxxxxx>
Subject: PM: Introduce core framework for run-time PM of I/O devices (rev. 2)
Introduce a core framework for run-time power management of I/O
devices. Add device run-time PM fields to 'struct dev_pm_info'
and device run-time PM callbacks to 'struct dev_pm_ops'. Introduce
a run-time PM workqueue and define some device run-time PM helper
functions at the core level. Document all these things.
Not-yet-signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
---
Documentation/power/runtime_pm.txt | 378 ++++++++++++++++++++++++++
drivers/base/dd.c | 9
drivers/base/power/Makefile | 1
drivers/base/power/main.c | 5
drivers/base/power/runtime.c | 533 +++++++++++++++++++++++++++++++++++++
include/linux/pm.h | 95 ++++++
include/linux/pm_runtime.h | 115 +++++++
kernel/power/Kconfig | 14
kernel/power/main.c | 17 +
9 files changed, 1164 insertions(+), 3 deletions(-)
Index: linux-2.6/kernel/power/Kconfig
===================================================================
--- linux-2.6.orig/kernel/power/Kconfig
+++ linux-2.6/kernel/power/Kconfig
@@ -208,3 +208,17 @@ config APM_EMULATION
random kernel OOPSes or reboots that don't seem to be related to
anything, try disabling/enabling this option (or disabling/enabling
APM in your BIOS).
+
+config PM_RUNTIME
+ bool "Run-time PM core functionality"
+ depends on PM
+ ---help---
+ Enable functionality allowing I/O devices to be put into energy-saving
+ (low power) states at run time (or autosuspended) after a specified
+ period of inactivity and woken up in response to a hardware-generated
+ wake-up event or a driver's request.
+
+ Hardware support is generally required for this functionality to work
+ and the bus type drivers of the buses the devices are on are
+ responsibile for the actual handling of the autosuspend requests and
+ wake-up events.
Index: linux-2.6/kernel/power/main.c
===================================================================
--- linux-2.6.orig/kernel/power/main.c
+++ linux-2.6/kernel/power/main.c
@@ -11,6 +11,7 @@
#include <linux/kobject.h>
#include <linux/string.h>
#include <linux/resume-trace.h>
+#include <linux/workqueue.h>
#include "power.h"
@@ -217,8 +218,24 @@ static struct attribute_group attr_group
.attrs = g,
};
+#ifdef CONFIG_PM_RUNTIME
+struct workqueue_struct *pm_wq;
+
+static int __init pm_start_workqueue(void)
+{
+ pm_wq = create_freezeable_workqueue("pm");
+
+ return pm_wq ? 0 : -ENOMEM;
+}
+#else
+static inline int pm_start_workqueue(void) { return 0; }
+#endif
+
static int __init pm_init(void)
{
+ int error = pm_start_workqueue();
+ if (error)
+ return error;
power_kobj = kobject_create_and_add("power", NULL);
if (!power_kobj)
return -ENOMEM;
Index: linux-2.6/include/linux/pm.h
===================================================================
--- linux-2.6.orig/include/linux/pm.h
+++ linux-2.6/include/linux/pm.h
@@ -22,6 +22,9 @@
#define _LINUX_PM_H
#include <linux/list.h>
+#include <linux/workqueue.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
/*
* Callbacks for platform drivers to implement.
@@ -165,6 +168,28 @@ typedef struct pm_message {
* It is allowed to unregister devices while the above callbacks are being
* executed. However, it is not allowed to unregister a device from within any
* of its own callbacks.
+ *
+ * There also are the following callbacks related to run-time power management
+ * of devices:
+ *
+ * @runtime_suspend: Prepare the device for a condition in which it won't be
+ * able to communicate with the CPU(s) and RAM due to power management.
+ * This need not mean that the device should be put into a low power state.
+ * For example, if the device is behind a link which is about to be turned
+ * off, the device may remain at full power. Still, if the device does go
+ * to low power and if device_may_wakeup(dev) is true, remote wake-up
+ * (i.e. hardware mechanism allowing the device to request a change of its
+ * power state, such as PCI PME) should be enabled for it.
+ *
+ * @runtime_resume: Put the device into the fully active state in response to a
+ * wake-up event generated by hardware or at a request of software. If
+ * necessary, put the device into the full power state and restore its
+ * registers, so that it is fully operational.
+ *
+ * @runtime_idle: Device appears to be inactive and it might be put into a low
+ * power state if all of the necessary conditions are satisfied. Check
+ * these conditions and handle the device as appropriate, possibly queueing
+ * a suspend request for it.
*/
struct dev_pm_ops {
@@ -182,6 +207,9 @@ struct dev_pm_ops {
int (*thaw_noirq)(struct device *dev);
int (*poweroff_noirq)(struct device *dev);
int (*restore_noirq)(struct device *dev);
+ int (*runtime_suspend)(struct device *dev);
+ int (*runtime_resume)(struct device *dev);
+ void (*runtime_idle)(struct device *dev);
};
/**
@@ -315,14 +343,75 @@ enum dpm_state {
DPM_OFF_IRQ,
};
+/**
+ * Device run-time power management state.
+ *
+ * These state labels are used internally by the PM core to indicate the current
+ * status of a device with respect to the PM core operations. They do not
+ * reflect the actual power state of the device or its status as seen by the
+ * driver.
+ *
+ * RPM_ACTIVE Device is fully operational, no run-time PM requests are
+ * pending for it.
+ *
+ * RPM_IDLE It has been requested that the device be suspended.
+ * Suspend request has been put into the run-time PM
+ * workqueue and it's pending execution.
+ *
+ * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being
+ * executed.
+ *
+ * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has
+ * completed successfully. The device is regarded as
+ * suspended.
+ *
+ * RPM_WAKE It has been requested that the device be woken up.
+ * Resume request has been put into the run-time PM
+ * workqueue and it's pending execution.
+ *
+ * RPM_RESUMING Device bus type's ->runtime_resume() callback is being
+ * executed.
+ *
+ * RPM_ERROR Represents a condition from which the PM core cannot
+ * recover by itself. If the device's run-time PM status
+ * field has this value, all of the run-time PM operations
+ * carried out for the device by the core will fail, until
+ * the status field is changed to either RPM_ACTIVE or
+ * RPM_SUSPENDED (it is not valid to use the other values
+ * in such a situation) by the device's driver or bus type.
+ * This happens when the device bus type's
+ * ->runtime_suspend() or ->runtime_resume() callback
+ * returns error code different from -EAGAIN or -EBUSY.
+ */
+
+#define RPM_ACTIVE 0
+#define RPM_IDLE 0x01
+#define RPM_SUSPENDING 0x02
+#define RPM_SUSPENDED 0x04
+#define RPM_WAKE 0x08
+#define RPM_RESUMING 0x10
+#define RPM_ERROR 0x1F
+
struct dev_pm_info {
pm_message_t power_state;
- unsigned can_wakeup:1;
- unsigned should_wakeup:1;
+ unsigned int can_wakeup:1;
+ unsigned int should_wakeup:1;
enum dpm_state status; /* Owned by the PM core */
-#ifdef CONFIG_PM_SLEEP
+#ifdef CONFIG_PM_SLEEP
struct list_head entry;
#endif
+#ifdef CONFIG_PM_RUNTIME
+ struct delayed_work suspend_work;
+ struct work_struct resume_work;
+ struct completion work_done;
+ unsigned int ignore_children:1;
+ unsigned int suspend_aborted:1;
+ unsigned int runtime_status:5;
+ int runtime_error;
+ int resume_count;
+ int child_count;
+ spinlock_t lock;
+#endif
};
/*
Index: linux-2.6/drivers/base/power/Makefile
===================================================================
--- linux-2.6.orig/drivers/base/power/Makefile
+++ linux-2.6/drivers/base/power/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_PM) += sysfs.o
obj-$(CONFIG_PM_SLEEP) += main.o
+obj-$(CONFIG_PM_RUNTIME) += runtime.o
obj-$(CONFIG_PM_TRACE_RTC) += trace.o
ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG
Index: linux-2.6/drivers/base/power/runtime.c
===================================================================
--- /dev/null
+++ linux-2.6/drivers/base/power/runtime.c
@@ -0,0 +1,533 @@
+/*
+ * drivers/base/power/runtime.c - Helper functions for device run-time PM
+ *
+ * Copyright (c) 2009 Rafael J. Wysocki <rjw@xxxxxxx>, Novell Inc.
+ *
+ * This file is released under the GPLv2.
+ */
+
+#include <linux/pm_runtime.h>
+#include <linux/jiffies.h>
+
+/**
+ * __pm_get_child - Increment the counter of unsuspended children of a device.
+ * @dev: Device to handle;
+ */
+static void __pm_get_child(struct device *dev)
+{
+ dev->power.child_count++;
+}
+
+/**
+ * __pm_put_child - Decrement the counter of unsuspended children of a device.
+ * @dev: Device to handle;
+ */
+static void __pm_put_child(struct device *dev)
+{
+ if (dev->power.child_count > 0)
+ dev->power.child_count--;
+ else
+ dev_warn(dev, "Excessive %s!\n", __FUNCTION__);
+}
+
+/**
+ * pm_runtime_notify_idle - Run a device bus type's runtime_idle() callback.
+ * @dev: Device to notify.
+ *
+ * Check if all children of given device are suspended and call the device bus
+ * type's ->runtime_idle() callback if that's the case.
+ */
+static void pm_runtime_notify_idle(struct device *dev)
+{
+ if (!pm_children_suspended(dev))
+ return;
+
+ if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_idle)
+ dev->bus->pm->runtime_idle(dev);
+}
+
+/**
+ * __pm_runtime_suspend - Run a device bus type's runtime_suspend() callback.
+ * @dev: Device to suspend.
+ * @sync: If unset, the funtion has been called via pm_wq.
+ *
+ * Check if the status of the device is appropriate and run the
+ * ->runtime_suspend() callback provided by the device's bus type driver.
+ * Update the run-time PM flags in the device object to reflect the current
+ * status of the device.
+ */
+int __pm_runtime_suspend(struct device *dev, bool sync)
+{
+ struct device *parent = NULL;
+ unsigned long parflags = 0, flags;
+ int error = -EINVAL;
+
+ might_sleep();
+
+ repeat:
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if (dev->power.runtime_status == RPM_ERROR) {
+ goto out;
+ } else if (dev->power.runtime_status & RPM_SUSPENDED) {
+ error = 0;
+ goto out;
+ } else if ((dev->power.runtime_status & (RPM_WAKE | RPM_RESUMING))
+ || dev->power.resume_count > 0
+ || (!sync && dev->power.suspend_aborted)) {
+ /*
+ * Device is resuming, there's a resume request pending for it,
+ * the device's resume counter is greater than 0, or a pending
+ * suspend request has just been cancelled and we're running as
+ * a result of that request.
+ */
+ error = -EAGAIN;
+ goto out;
+ } else if (dev->power.runtime_status == RPM_SUSPENDING) {
+ /*
+ * Another suspend is running in parallel with us. Wait for it
+ * to complete and return.
+ */
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ wait_for_completion(&dev->power.work_done);
+
+ return dev->power.runtime_error;
+ } else if (sync && dev->power.runtime_status == RPM_IDLE) {
+ /*
+ * Suspend request is pending, but we're not running as a result
+ * of it, so cancel it and repeat.
+ */
+ dev->power.suspend_aborted = true;
+ dev->power.runtime_status = RPM_ACTIVE;
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ cancel_delayed_work_sync(&dev->power.suspend_work);
+
+ goto repeat;
+ }
+
+ if (!pm_children_suspended(dev)) {
+ /*
+ * We can only suspend the device if all of its children have
+ * been suspended.
+ */
+ dev->power.runtime_status = RPM_ACTIVE;
+ error = -EBUSY;
+ goto out;
+ }
+
+ dev->power.runtime_status = RPM_SUSPENDING;
+ init_completion(&dev->power.work_done);
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_suspend)
+ error = dev->bus->pm->runtime_suspend(dev);
+ parent = dev->parent;
+
+ if (parent)
+ spin_lock_irqsave(&parent->power.lock, parflags);
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ switch (error) {
+ case 0:
+ /*
+ * Resume request might have been queued in the meantime, in
+ * which case the RPM_WAKE bit is also set in runtime_status.
+ */
+ dev->power.runtime_status &= ~RPM_SUSPENDING;
+ dev->power.runtime_status |= RPM_SUSPENDED;
+ break;
+ case -EAGAIN:
+ case -EBUSY:
+ dev->power.runtime_status = RPM_ACTIVE;
+ break;
+ default:
+ dev->power.runtime_status = RPM_ERROR;
+ }
+ dev->power.runtime_error = error;
+ complete_all(&dev->power.work_done);
+
+ if (!error && !(dev->power.runtime_status & RPM_WAKE) && parent) {
+ __pm_put_child(parent);
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+
+ pm_runtime_notify_idle(parent);
+
+ return 0;
+ }
+
+ out:
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent)
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(__pm_runtime_suspend);
+
+/**
+ * pm_runtime_suspend_work - Run pm_runtime_suspend() for a device.
+ * @work: Work structure used for scheduling the execution of this function.
+ *
+ * Use @work to get the device object the suspend has been scheduled for and
+ * run pm_runtime_suspend() for it.
+ */
+static void pm_runtime_suspend_work(struct work_struct *work)
+{
+ __pm_runtime_suspend(suspend_work_to_device(work), false);
+}
+
+/**
+ * pm_request_suspend - Schedule run-time suspend of given device.
+ * @dev: Device to suspend.
+ * @msec: Time to wait before attempting to suspend the device, in milliseconds.
+ */
+void pm_request_suspend(struct device *dev, unsigned int msec)
+{
+ unsigned long flags;
+ unsigned long delay = msecs_to_jiffies(msec);
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if (dev->power.runtime_status != RPM_ACTIVE)
+ goto out;
+
+ dev->power.runtime_status = RPM_IDLE;
+ dev->power.suspend_aborted = false;
+ queue_delayed_work(pm_wq, &dev->power.suspend_work, delay);
+
+ out:
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_request_suspend);
+
+/**
+ * __pm_runtime_get - Increment the resume counter of given device.
+ * @dev: Device to handle.
+ */
+static void __pm_runtime_get(struct device *dev)
+{
+ dev->power.resume_count++;
+}
+
+/**
+ * __pm_runtime_put - Decrement the resume counter of given device.
+ * @dev: Device to handle.
+ */
+static void __pm_runtime_put(struct device *dev)
+{
+ if (dev->power.resume_count > 0)
+ dev->power.resume_count--;
+ else
+ dev_warn(dev, "Excessive %s!\n", __FUNCTION__);
+}
+
+/**
+ * __pm_runtime_resume - Run a device bus type's runtime_resume() callback.
+ * @dev: Device to resume.
+ * @get: If set, increment the device's resume counter.
+ * @sync: If unset, the funtion has been called via pm_wq.
+ *
+ * Check if the device is really suspended and run the ->runtime_resume()
+ * callback provided by the device's bus type driver. Update the run-time PM
+ * flags in the device object to reflect the current status of the device. If
+ * runtime suspend is in progress while this function is being run, wait for it
+ * to finish before resuming the device. If runtime suspend is scheduled, but
+ * it hasn't started yet, cancel it and we're done.
+ */
+int __pm_runtime_resume(struct device *dev, bool get, bool sync)
+{
+ struct device *parent = dev->parent;
+ unsigned long parflags = 0, flags;
+ bool put_parent = false;
+ int error = -EINVAL;
+
+ might_sleep();
+
+ repeat:
+ if (parent)
+ spin_lock_irqsave(&parent->power.lock, parflags);
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if (dev->power.runtime_status == RPM_ERROR) {
+ goto out;
+ } else if (dev->power.runtime_status == RPM_ACTIVE) {
+ error = 0;
+ goto out;
+ }
+
+ if (dev->power.runtime_status & RPM_IDLE) {
+ /* Only a suspend request is pending, cancel it and repeat. */
+ dev->power.suspend_aborted = true;
+ dev->power.runtime_status &= ~RPM_IDLE;
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent)
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+
+ cancel_delayed_work_sync(&dev->power.suspend_work);
+
+ goto repeat;
+ } else if (sync && (dev->power.runtime_status & RPM_WAKE)) {
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent)
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+
+ /*
+ * Resume request is pending, but we're not running as a result
+ * of it, so it has to run before we continue in case it's
+ * going to increment the device's resume counter.
+ */
+ flush_work(&dev->power.resume_work);
+
+ goto repeat;
+ } else if (dev->power.runtime_status & RPM_SUSPENDING) {
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent)
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+
+ /*
+ * A suspend is running in parallel with us. Wait for it to
+ * complete and repeat.
+ */
+ wait_for_completion(&dev->power.work_done);
+
+ goto repeat;
+ } else if (dev->power.runtime_status == RPM_SUSPENDED && parent
+ && parent->power.runtime_status != RPM_ACTIVE) {
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+
+ /* The parent as to be resumed before we continue. */
+ error = pm_runtime_resume_get(parent);
+ if (error)
+ return error;
+
+ put_parent = true;
+ error = -EINVAL;
+ goto repeat;
+ }
+
+ if (dev->power.runtime_status == RPM_RESUMING) {
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent) {
+ if (put_parent)
+ __pm_runtime_put(parent);
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+ parent = NULL;
+ }
+
+ /*
+ * There's another resume running in parallel with us. Wait for
+ * it to complete and return.
+ */
+ wait_for_completion(&dev->power.work_done);
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ error = dev->power.runtime_error;
+ goto out;
+ }
+
+ if (dev->power.runtime_status == RPM_SUSPENDED && parent)
+ __pm_get_child(parent);
+
+ dev->power.runtime_status = RPM_RESUMING;
+ init_completion(&dev->power.work_done);
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent) {
+ if (put_parent)
+ __pm_runtime_put(parent);
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+ parent = NULL;
+ }
+
+ if (dev->bus && dev->bus->pm && dev->bus->pm->runtime_resume)
+ error = dev->bus->pm->runtime_resume(dev);
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ dev->power.runtime_status = error ? RPM_ERROR : RPM_ACTIVE;
+ dev->power.runtime_error = error;
+ complete_all(&dev->power.work_done);
+
+ out:
+ if (!error && get)
+ __pm_runtime_get(dev);
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent) {
+ if (put_parent)
+ __pm_runtime_put(parent);
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+ }
+
+ return error;
+}
+EXPORT_SYMBOL_GPL(pm_runtime_resume);
+
+/**
+ * pm_runtime_resume_work - Run __pm_runtime_resume() for a device.
+ * @work: Work structure used for scheduling the execution of this function.
+ *
+ * Use @work to get the device object the resume has been scheduled for and run
+ * __pm_runtime_resume() for it.
+ */
+static void pm_runtime_resume_work(struct work_struct *work)
+{
+ __pm_runtime_resume(resume_work_to_device(work), false, false);
+}
+
+/**
+ * pm_request_resume - Schedule run-time resume of given device.
+ * @dev: Device to resume.
+ */
+void pm_request_resume(struct device *dev)
+{
+ struct device *parent = dev->parent;
+ unsigned long parflags = 0, flags;
+
+ repeat:
+ if (parent)
+ spin_lock_irqsave(&parent->power.lock, parflags);
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if ((dev->power.runtime_status & RPM_WAKE)
+ || !(dev->power.runtime_status &
+ (RPM_SUSPENDING | RPM_SUSPENDED))) {
+ goto out;
+ } else if (parent && !(parent->power.runtime_status & RPM_WAKE)
+ && (parent->power.runtime_status &
+ (RPM_IDLE | RPM_SUSPENDING | RPM_SUSPENDED))) {
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+
+ pm_request_resume(parent);
+
+ goto repeat;
+ }
+
+ if (dev->power.runtime_status == RPM_SUSPENDED && parent)
+ __pm_get_child(parent);
+
+ /*
+ * The device may be suspending at the moment or a suspend request may
+ * be pending for it and we can't clear the RPM_IDLE or RPM_SUSPENDING
+ * bit in its runtime_status just yet.
+ */
+ dev->power.runtime_status |= RPM_WAKE;
+ queue_work(pm_wq, &dev->power.resume_work);
+
+ out:
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent)
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+}
+EXPORT_SYMBOL_GPL(pm_request_resume);
+
+/**
+ * pm_runtime_put - Decrement the resume counter of a device under 'power.lock'.
+ * @dev: Device to handle.
+ */
+void pm_runtime_put(struct device *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ __pm_runtime_put(dev);
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_put);
+
+/**
+ * pm_runtime_disable - Disable run-time suspend and resume of a device.
+ * @dev: Device to handle.
+ *
+ * Increase the resume counter of given device, so that it cannot be suspended
+ * at run time, and run pm_runtime_resume() for it to put it into the RPM_ACTIVE
+ * state, which also blocks run-time resume of it.
+ */
+void pm_runtime_disable(struct device *dev)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ __pm_runtime_get(dev);
+
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+
+ pm_runtime_resume(dev);
+}
+EXPORT_SYMBOL_GPL(pm_runtime_disable);
+
+/**
+ * __pm_runtime_clear_status - Change the run-time PM status of a device.
+ * @dev: Device to handle.
+ * @status: New value of the device's run-time PM status.
+ *
+ * Change the run-time PM status of the device to @status, which must be
+ * either RPM_ACTIVE or RPM_SUSPENDED, if its current value is equal to
+ * RPM_ERROR.
+ */
+void __pm_runtime_clear_status(struct device *dev, unsigned int status)
+{
+ struct device *parent = dev->parent;
+ unsigned long parflags = 0, flags;
+
+ if (status & ~RPM_SUSPENDED)
+ return;
+
+ if (parent)
+ spin_lock_irqsave(&parent->power.lock, parflags);
+ spin_lock_irqsave(&dev->power.lock, flags);
+
+ if (dev->power.runtime_status != RPM_ERROR)
+ goto out;
+
+ dev->power.runtime_status = status;
+ if (parent && status == RPM_SUSPENDED)
+ __pm_put_child(parent);
+
+ out:
+ spin_unlock_irqrestore(&dev->power.lock, flags);
+ if (parent)
+ spin_unlock_irqrestore(&parent->power.lock, parflags);
+}
+EXPORT_SYMBOL_GPL(__pm_runtime_clear_status);
+
+/**
+ * pm_runtime_init - Initialize run-time PM fields in given device object.
+ * @dev: Device object to handle.
+ */
+void pm_runtime_init(struct device *dev)
+{
+ struct device *parent = dev->parent;
+
+ spin_lock_init(&dev->power.lock);
+
+ dev->power.runtime_status = RPM_ACTIVE;
+ dev->power.resume_count = 1;
+ pm_suspend_ignore_children(dev, false);
+ dev->power.child_count = 0;
+ INIT_DELAYED_WORK(&dev->power.suspend_work, pm_runtime_suspend_work);
+ INIT_WORK(&dev->power.resume_work, pm_runtime_resume_work);
+
+ if (parent) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&parent->power.lock, flags);
+
+ __pm_get_child(parent);
+
+ spin_unlock_irqrestore(&parent->power.lock, flags);
+ }
+}
Index: linux-2.6/include/linux/pm_runtime.h
===================================================================
--- /dev/null
+++ linux-2.6/include/linux/pm_runtime.h
@@ -0,0 +1,115 @@
+/*
+ * pm_runtime.h - Device run-time power management helper functions.
+ *
+ * Copyright (C) 2009 Rafael J. Wysocki <rjw@xxxxxxx>
+ *
+ * This file is released under the GPLv2.
+ */
+
+#ifndef _LINUX_PM_RUNTIME_H
+#define _LINUX_PM_RUNTIME_H
+
+#include <linux/device.h>
+#include <linux/pm.h>
+
+#ifdef CONFIG_PM_RUNTIME
+
+extern struct workqueue_struct *pm_wq;
+
+extern void pm_runtime_init(struct device *dev);
+extern int __pm_runtime_suspend(struct device *dev, bool sync);
+extern void pm_request_suspend(struct device *dev, unsigned int msec);
+extern int __pm_runtime_resume(struct device *dev, bool get, bool sync);
+extern void pm_request_resume(struct device *dev);
+extern void pm_runtime_put(struct device *dev);
+extern void pm_runtime_disable(struct device *dev);
+extern void __pm_runtime_clear_status(struct device *dev, unsigned int status);
+
+static inline struct device *suspend_work_to_device(struct work_struct *work)
+{
+ struct delayed_work *dw = to_delayed_work(work);
+ struct dev_pm_info *dpi;
+
+ dpi = container_of(dw, struct dev_pm_info, suspend_work);
+ return container_of(dpi, struct device, power);
+}
+
+static inline struct device *resume_work_to_device(struct work_struct *work)
+{
+ struct dev_pm_info *dpi;
+
+ dpi = container_of(work, struct dev_pm_info, resume_work);
+ return container_of(dpi, struct device, power);
+}
+
+static inline bool pm_children_suspended(struct device *dev)
+{
+ return dev->power.ignore_children || !dev->power.child_count;
+}
+
+static inline bool pm_suspend_possible(struct device *dev)
+{
+ return pm_children_suspended(dev) && !(dev->power.resume_count > 0
+ || (dev->power.runtime_status & (RPM_WAKE | RPM_RESUMING)));
+}
+
+static inline void pm_suspend_ignore_children(struct device *dev, bool enable)
+{
+ dev->power.ignore_children = enable;
+}
+
+#else /* !CONFIG_PM_RUNTIME */
+
+static inline void pm_runtime_init(struct device *dev) {}
+static inline int __pm_runtime_suspend(struct device *dev, bool sync)
+{
+ return -ENOSYS;
+}
+static inline void pm_request_suspend(struct device *dev, unsigned int msec) {}
+static inline int __pm_runtime_resume(struct device *dev, bool get, bool sync)
+{
+ return -ENOSYS;
+}
+static inline void pm_request_resume(struct device *dev) {}
+static inline void pm_runtime_put(struct device *dev) {}
+static inline void pm_runtime_disable(struct device *dev) {}
+static inline void __pm_runtime_clear_status(struct device *dev,
+ unsigned int status) {}
+
+static inline bool pm_children_suspended(struct device *dev) { return false; }
+static inline bool pm_suspend_possible(struct device *dev) { return false; }
+static inline void pm_suspend_ignore_children(struct device *dev, bool en) {}
+
+#endif /* !CONFIG_PM_RUNTIME */
+
+static inline int pm_runtime_suspend(struct device *dev)
+{
+ return __pm_runtime_suspend(dev, true);
+}
+
+static inline int pm_runtime_resume(struct device *dev)
+{
+ return __pm_runtime_resume(dev, false, true);
+}
+
+static inline int pm_runtime_resume_get(struct device *dev)
+{
+ return __pm_runtime_resume(dev, true, true);
+}
+
+static inline void pm_runtime_clear_active(struct device *dev)
+{
+ __pm_runtime_clear_status(dev, RPM_ACTIVE);
+}
+
+static inline void pm_runtime_clear_suspended(struct device *dev)
+{
+ __pm_runtime_clear_status(dev, RPM_SUSPENDED);
+}
+
+static inline void pm_runtime_enable(struct device *dev)
+{
+ pm_runtime_put(dev);
+}
+
+#endif
Index: linux-2.6/drivers/base/power/main.c
===================================================================
--- linux-2.6.orig/drivers/base/power/main.c
+++ linux-2.6/drivers/base/power/main.c
@@ -21,6 +21,7 @@
#include <linux/kallsyms.h>
#include <linux/mutex.h>
#include <linux/pm.h>
+#include <linux/pm_runtime.h>
#include <linux/resume-trace.h>
#include <linux/rwsem.h>
#include <linux/interrupt.h>
@@ -88,6 +89,7 @@ void device_pm_add(struct device *dev)
}
list_add_tail(&dev->power.entry, &dpm_list);
+ pm_runtime_init(dev);
mutex_unlock(&dpm_list_mtx);
}
@@ -507,6 +509,7 @@ static void dpm_complete(pm_message_t st
get_device(dev);
if (dev->power.status > DPM_ON) {
dev->power.status = DPM_ON;
+ pm_runtime_enable(dev);
mutex_unlock(&dpm_list_mtx);
device_complete(dev, state);
@@ -753,6 +756,7 @@ static int dpm_prepare(pm_message_t stat
get_device(dev);
dev->power.status = DPM_PREPARING;
+ pm_runtime_disable(dev);
mutex_unlock(&dpm_list_mtx);
error = device_prepare(dev, state);
@@ -760,6 +764,7 @@ static int dpm_prepare(pm_message_t stat
mutex_lock(&dpm_list_mtx);
if (error) {
dev->power.status = DPM_ON;
+ pm_runtime_enable(dev);
if (error == -EAGAIN) {
put_device(dev);
continue;
Index: linux-2.6/drivers/base/dd.c
===================================================================
--- linux-2.6.orig/drivers/base/dd.c
+++ linux-2.6/drivers/base/dd.c
@@ -23,6 +23,7 @@
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/async.h>
+#include <linux/pm_runtime.h>
#include "base.h"
#include "power/power.h"
@@ -202,8 +203,12 @@ int driver_probe_device(struct device_dr
pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
drv->bus->name, __func__, dev_name(dev), drv->name);
+ pm_runtime_disable(dev);
+
ret = really_probe(dev, drv);
+ pm_runtime_enable(dev);
+
return ret;
}
@@ -306,6 +311,8 @@ static void __device_release_driver(stru
drv = dev->driver;
if (drv) {
+ pm_runtime_disable(dev);
+
driver_sysfs_remove(dev);
if (dev->bus)
@@ -320,6 +327,8 @@ static void __device_release_driver(stru
devres_release_all(dev);
dev->driver = NULL;
klist_remove(&dev->p->knode_driver);
+
+ pm_runtime_enable(dev);
}
}
Index: linux-2.6/Documentation/power/runtime_pm.txt
===================================================================
--- /dev/null
+++ linux-2.6/Documentation/power/runtime_pm.txt
@@ -0,0 +1,378 @@
+Run-time Power Management Framework for I/O Devices
+
+(C) 2009 Rafael J. Wysocki <rjw@xxxxxxx>, Novell Inc.
+
+1. Introduction
+
+Support for run-time power management (run-time PM) of I/O devices is provided
+at the power management core (PM core) level by means of:
+
+* The power management workqueue pm_wq in which bus types and device drivers can
+ put their PM-related work items. It is strongly recommended that pm_wq be
+ used for queuing all work items related to run-time PM, because this allows
+ them to be synchronized with system-wide power transitions. pm_wq is declared
+ in include/linux/pm_runtime.h and defined in kernel/power/main.c.
+
+* A number of run-time PM fields in the 'power' member of 'struct device' (which
+ is of the type 'struct dev_pm_info', defined in include/linux/pm.h) that can
+ be used for synchronizing run-time PM operations with one another.
+
+* Three device run-time PM callbacks in 'struct dev_pm_ops' (defined in
+ include/linux/pm.h).
+
+* A set of helper functions defined in drivers/base/power/runtime.c that can be
+ used for carrying out run-time PM operations in such a way that the
+ synchronization between them is taken care of by the PM core. Bus types and
+ device drivers are encouraged to use these functions.
+
+The device run-time PM fields of 'struct dev_pm_info', the helper functions
+using them and the run-time PM callbacks present in 'struct dev_pm_ops' are
+described below.
+
+2. Run-time PM Helper Functions and Device Fields
+
+The following helper functions are defined in drivers/base/power/runtime.c
+and include/linux/pm_runtime.h:
+
+* void pm_runtime_init(struct device *dev);
+
+* int pm_runtime_suspend(struct device *dev);
+* void pm_request_suspend(struct device *dev, unsigned int msec);
+* int pm_runtime_resume(struct device *dev);
+* int pm_runtime_resume_get(struct device *dev);
+* void pm_request_resume(struct device *dev);
+* void pm_runtime_put(struct device *dev);
+
+* bool pm_suspend_possible(struct device *dev);
+
+* void pm_runtime_enable(struct device *dev);
+* void pm_runtime_disable(struct device *dev);
+
+* void pm_suspend_ignore_children(struct device *dev, bool enable);
+
+* void pm_runtime_clear_active(struct device *dev) {}
+* void pm_runtime_clear_suspended(struct device *dev) {}
+
+pm_runtime_init() initializes the run-time PM fields in the 'power' member of
+a device object. It is called during the initialization of the device object,
+in drivers/base/power/main.c:device_pm_add().
+
+pm_runtime_suspend(), pm_request_suspend(), pm_runtime_resume(),
+pm_runtime_resume_get(), pm_request_resume(), and pm_request_resume_get()
+use the 'power.runtime_status', 'power.resume_count', 'power.suspend_aborted',
+and 'power.child_count' fields of 'struct device' for mutual cooperation. In
+what follows the 'power.runtime_status', 'power.resume_count', and
+'power.child_count' fields are referred to as the device's run-time PM status,
+the device's resume counter, and the counter of unsuspended children of the
+device, respectively. They are set to RPM_ACTIVE, 1 and 0, respectively, by
+pm_runtime_init().
+
+pm_runtime_suspend() is used to carry out a run-time suspend of an active
+device. It is called directly by a bus type or device driver. There also is
+an asynchronous version of it, which is executed by the PM core to complete a
+request queued up by pm_request_suspend(). However, the only difference between
+them is the handling of situations in which a queued up suspend request has just
+been cancelled. Apart from this, they work in the same way.
+
+ * If the device is suspended (i.e. the RPM_SUSPENDED bit is set in the
+ device's run-time PM status field, 'power.runtime_status'), success is
+ returned.
+
+ * If the device is about to resume (i.e. at least one of the RPM_WAKE and
+ RPM_RESUMING bits are set in its run-time PM status field) or its resume
+ counter is greater than 0, or the function has been called via pm_wq as a
+ result of a cancelled suspend request (the 'power.suspend_aborted' field is
+ used to signal the termination of a suspend request), -EAGAIN is returned.
+
+ * If the device is suspending (i.e. its run-time PM status is RPM_SUSPENDING),
+ which means that another instance of pm_runtime_suspend() is running at the
+ same time for the same device, the function waits for the other instance to
+ complete and returns the error code (or success) returned by it.
+
+ * If the device has a pending suspend request (i.e. the RPM_IDLE bit is set in
+ its run-time PM status) and the function hasn't been called as a result of
+ that request, it cancels the request and restarts itself in case another
+ suspend is running in parallel with it.
+
+ * If the children of the device are not suspended and the
+ 'power.ignore_children' flag is not set for it, the device's run-time PM
+ status is set to RPM_ACTIVE and -EAGAIN is returned.
+
+If none of the above takes place, the device's run-time PM status is set to
+RPM_SUSPENDING and its bus type's ->runtime_suspend() callback is executed.
+This callback is responsible for handling the device as appropriate (for
+example, it may choose to execute the device driver's ->runtime_suspend()
+callback or to carry out any other suitable action depending on the bus type).
+
+ * If it completes successfully, the RPM_SUSPENDING bit is cleared and the
+ RPM_SUSPENDED bit is set in the device's run-time PM status field. Once
+ that has happened, the device is regarded by the PM core as suspended, but
+ it _need_ _not_ mean that the device has been put into a low power state.
+ What really occurs to the device at this point totally depends on its bus
+ type (it may depend on the device's driver if the bus type chooses to call
+ it). Additionally, if the device bus type's ->runtime_suspend() callback
+ completes successfully and there's no resume request pending for the device
+ (i.e. the RPM_WAKE flag is not set in its run-time PM status field), and the
+ device has a parent, the parent's counter of unsuspended children (i.e. the
+ 'power.child_count' field) is decremented. Next, if it turns out to be
+ equal to zero (i.e. all children of the device's parent have been suspended)
+ or the parent has the 'power.ignore_children' flag set, the parent's bus
+ type's ->runtime_idle() callback is executed.
+
+ * If either -EBUSY or -EAGAIN is returned, the device's run-time PM status is
+ set to RPM_ACTIVE.
+
+ * If another error code is returned, the device's run-time PM status is set to
+ RPM_ERROR, which makes the PM core refuse to carry out any run-time PM
+ operations for it until the status is cleared by its bus type or driver with
+ the help of pm_runtime_clear_active() or pm_runtime_clear_suspended().
+
+Finally, pm_runtime_suspend() returns the error code (or success) returned by
+the device bus type's ->runtime_suspend() callback. If the device's bus type
+doesn't implement ->runtime_suspend(), -EINVAL is returned and the device's
+run-time PM status is set to RPM_ERROR.
+
+pm_request_suspend() is used to queue up a suspend request for an active device.
+If the run-time PM status of the device (i.e. the value of the
+'power.runtime_status' field in 'struct device') is different from RPM_ACTIVE
+(i.e. the device is not active from the PM core standpoint), the function
+returns immediately. Otherwise, it changes the device's run-time PM status to
+RPM_IDLE and puts a request to suspend the device into pm_wq. The 'msec'
+argument is used to specify the time to wait before the request will be
+completed, in milliseconds. It is valid to call this function from interrupt
+context.
+
+pm_runtime_resume() and pm_runtime_resume_get() are used to carry out a
+run-time resume of a device that is suspended, suspending or has a suspend
+request pending. They are called directly by a bus type or device driver.
+The difference between them is that pm_request_resume_get() increments the
+device's resume counter, which prevents the PM core from suspending the device
+or queuing up a suspend request for it until its resume counter is decreased
+down to 0 with the help of pm_runtime_put(). Apart from this, they work in the
+same way. There also is an asynchronous version of pm_runtime_resume(), called
+by the PM core as a result of a resume request queued up by pm_request_resume(),
+which doesn't check if there's a concurrent pending resume request for the
+device.
+
+ * If the device is active (i.e. all of the bits in its run-time PM status are
+ unset), success is returned (pm_request_resume_get() increments the device's
+ resume counter in that case).
+
+ * If there's a suspend request pending for the device (i.e. the device's
+ run-time PM status is RPM_IDLE), it is cancelled, the
+ 'power.suspend_aborted' flag is set for the device, the RPM_IDLE bit is
+ cleared in its run-time PM status field and the function restarts itself.
+
+ * If the device has a pending resume request (i.e. the RPM_WAKE bit is set in
+ its run-time PM status field), but the function hasn't been called as a
+ result of that request, the function waits for that request to complete
+ (in case it's going to increment the device's resume counter) and restarts
+ itself.
+
+ * If the device is suspending (i.e. the RPM_SUSPENDING bit is set in its
+ run-time PM status field), the function waits for the suspend operation to
+ complete and restarts itself.
+
+ * If the device is suspended and doesn't have a pending resume request (i.e.
+ its run-time PM status is RPM_SUSPENDED), and it has a parent that is not
+ active (i.e. the parent's run-time PM status is not RPM_ACTIVE),
+ pm_runtime_resume_get() is called (recursively) for the parent. If the
+ parent's resume is successful, the function notes that the parent's resume
+ counter will have to be decremented and restarts itself. Otherwise, it
+ returns the error code returned by the instance of pm_runtime_resume_get()
+ handling the device's parent.
+
+ * If the device is resuming (i.e. the device's run-time PM status is
+ RPM_RESUMING), which means that another instance of pm_runtime_resume() or
+ pm_runtime_resume_get() is running at the same time for the same device, the
+ function waits for the other instance to complete and returns the result
+ returned by it (pm_runtime_resume_get() increments the device's resume
+ counter if success is returned).
+
+If none of the above happens, the function checks if the device's run-time PM
+status is RPM_SUSPENDED, which means that the device doesn't have a resume
+request pending, and if it has a parent. If that is the case, the parent's
+counter of unsuspended children is increased. Next, the device's run-time PM
+status is set to RPM_RESUMING and its bus type's ->runtime_resume() callback is
+executed. This callback is entirely responsible for handling the device as
+appropriate (for example, it may choose to execute the device driver's
+->runtime_resume() callback or to carry out any other suitable action depending
+on the bus type).
+
+ * If it completes successfully, the device's run-time PM status is set to
+ RPM_ACTIVE, which means that the device is fully operational. Thus, the
+ device bus type's ->runtime_resume() callback, when it is about to return
+ success, _must_ _ensure_ that this really is the case (i.e. when it returns
+ success, the device _must_ be able to carry out I/O operations as needed).
+
+ * If an error code is returned, the device's run-time PM status is set to
+ RPM_ERROR, which makes the PM core refuse to carry out any run-time PM
+ operations for the device until the status is cleared by its bus type or
+ driver with the help of either pm_runtime_clear_active(), or
+ pm_runtime_clear_suspended(). Thus, it is strongly recommended that the
+ device bus type's ->runtime_resume() callback only return error codes in
+ fatal error conditions, when it is impossible to bring the device back to
+ the operational state by any available means. Inability to wake up a
+ suspended device usually means a service loss and it may very well result in
+ a data loss to the user, so it _must_ be avoided if at all possible.
+
+Finally, pm_runtime_resume() and pm_runtime_resume_get() return the error code
+(or success) returned by the device bus type's ->runtime_resume() callback
+(pm_runtime_resume_get() increments the device's resume counter if success is
+returned). If the device's bus type doesn't implement ->runtime_resume(),
+-EINVAL is returned and the device's run-time PM status is set to RPM_ERROR.
+
+pm_request_resume() is used to queue up a resume request for a device that is
+suspended, suspending or has a suspend request pending.
+
+ * If the device has a resume request pending (i.e. the RPM_WAKE bit is set in
+ its run-time PM status field) or the device is not suspended or suspending
+ (i.e. none of the RPM_SUSPENDED and RPM_SUSPENDING bits is set in its
+ run-time PM status field), the function returns.
+
+ * If the device has a parent and the parent is inactive (i.e. at least one of
+ the RPM_IDLE, RPM_SUSPENDING, and RPM_SUSPENDED bits is set in its run-time
+ PM status field), and the parent doesn't have a resume request pending
+ (i.e. the RPM_WAKE bit is not set in the parent's run-time PM status field),
+ a resume request is scheduled for the parent with the help of
+ pm_request_resume() (i.e. recursively) and the function is restarted.
+
+If none of the above happens, the function checks if the device's run-time PM
+status is RPM_SUSPENDED, which means that the device is not suspending at the
+moment, and if it has a parent. If that is the case, the parent's counter of
+unsuspended children is increased. Next, the RPM_WAKE bit is set in the
+device's run-time PM status field and the request to execute the asynchronous
+version of pm_runtime_resume() is put into pm_wq. It is valid to call this
+function from interrupt context.
+
+Note that it is possible to have a resume request and a suspend request queued
+up at the same time. In that case, if the suspend request is attempted to
+complete first, the asynchronous version of pm_runtime_suspend() run as a result
+of it will notice that the RPM_WAKE bit is set in the device's run-time PM
+status field and will return -EAGAIN as a result without doing anything else.
+Then, the subsequent resume carried out as a result of the queued up request
+will notice that the RPM_IDLE bit is set in the device's run-time PM status
+field, so it will try to cancel the suspend request and the run-time PM status
+of the device will be set to RPM_ACTIVE. On the other hand, if the resume
+request is attempted to complete first, which is more likely, it will cancel the
+pending suspend request the run-time PM status of the device will be set to
+RPM_ACTIVE.
+
+pm_runtime_put() is used to decrease the device's resume counter by 1. If the
+resume counter of the device is greater than 0, it causes the PM core to refuse
+to suspend the device or to queue up a suspend request for it. In particular,
+it causes pm_runtime_suspend() to return -EAGAIN without doing anything else.
+This may be useful if the device is resumed for a specific task and it shouldn't
+be suspended until the task is complete, but there are many potential sources of
+suspend requests that could disturb it. It is valid to call this function from
+interrupt context.
+
+pm_suspend_possible() is used to check if the device may be suspended at this
+particular moment. It checks the device's run-time PM status, resume counter,
+and the counter of unsuspended children. It returns 'false' if the device's
+counter of unsuspended children is greater than 0 or the device's resume counter
+is greater than 0, or at least one of the RPM_WAKE and RPM_RESUMING bits is set
+in its run-time PM status field. It is valid to call this function from
+interrupt context.
+
+pm_runtime_enable() and pm_runtime_disable() are used to enable and disable,
+respectively, all of the run-time PM core operations. They do it by decreasing
+and increasing, respectively, the device's resume counter, but
+pm_runtime_disable() additionally calls pm_runtime_resume() for the device to
+make sure that the device will not be suspended while its run-time power
+management is disabled. Therefore, if pm_runtime_disable() is called several
+times in a row for the same device, it has to be balanced by the appropriate
+number of pm_runtime_enable() calls so that the other run-time PM core functions
+can be used for that device. The initial value of the device's resume counter,
+as set by pm_runtime_init(), is 1 (i.e. the device's run-time power management
+is initially disabled).
+
+pm_runtime_disable() and pm_runtime_enable() are used by the device core to
+disable the run-time power management of devices temporarily during device probe
+and removal as well as during system-wide power transitions (i.e. system-wide
+suspend or hibernation, or resume from a system sleep state).
+
+pm_suspend_ignore_children() is used to set or unset the
+'power.ignore_children' flag in 'struct device'. If the 'enabled'
+argument is 'true', the field is set to 1, and if 'enable' is 'false', the field
+is set to 0. The default value of 'power.ignore_children', as set by
+pm_runtime_init(), is 0.
+
+pm_runtime_clear_active() is used to change the device's run-time PM status
+field from RPM_ERROR to RPM_ACTIVE. It is valid to call this function from
+interrupt context.
+
+pm_runtime_clear_suspended() is used to change the device's run-time PM status
+field from RPM_ERROR to RPM_SUSPENDED. If the device has a parent, it the
+function additionally decrements the parent's counter of unsuspended children.
+It is valid to call this function from interrupt context.
+
+3. Device Run-time PM Callbacks
+
+There are three device run-time PM callbacks defined in 'struct dev_pm_ops':
+
+struct dev_pm_ops {
+ ...
+ int (*runtime_suspend)(struct device *dev);
+ int (*runtime_resume)(struct device *dev);
+ void (*runtime_idle)(struct device *dev);
+ ...
+};
+
+The ->runtime_suspend() callback is executed by pm_runtime_suspend() for the bus
+type of the device being suspended. The bus type's callback is then _fully_
+_responsible_ for handling the device as appropriate, which may, but need not
+include executing the device driver's ->runtime_suspend() callback (from the PM
+core's point of view it is not necessary to implement a ->runtime_suspend()
+callback in a device driver as long as the bus type's ->runtime_suspend() knows
+what to do to handle the device).
+* Once the bus type's ->runtime_suspend() callback has returned successfully,
+ the PM core regards the device as suspended, which need not mean that the
+ device has been put into a low power state. It is supposed to mean, however,
+ that the device will not communicate with the CPU(s) and RAM until the bus
+ type's ->runtime_resume() callback is executed for it.
+* If the bus type's ->runtime_suspend() callback returns -EBUSY or -EAGAIN, the
+ device's run-time PM status is set to RPM_ACTIVE, which means that the device
+ _must_ be fully operational one this has happened.
+* If the bus type's ->runtime_suspend() callback returns an error code different
+ from -EBUSY or -EAGAIN, the PM core regards this as an unrecoverable error and
+ will refuse to run the helper functions described in Section 1 until the
+ status is changed to either RPM_SUSPENDED or RPM_ACTIVE by the device's bus
+ type or driver.
+In particular, it is recommended that ->runtime_suspend() return -EBUSY or
+-EAGAIN if device_may_wakeup() returns 'false' for the device. On the other
+hand, if device_may_wakeup() returns 'true' for the device and the device is put
+into a low power state during the execution of ->runtime_suspend(), it is
+expected that remote wake-up (i.e. hardware mechanism allowing the device to
+request a change of its power state, such as PCI PME) will be enabled for the
+device. Generally, remote wake-up should be enabled whenever the device is put
+into a low power state at run time and is expected to receive input from the
+outside of the system.
+
+The ->runtime_resume() callback is executed by pm_runtime_resume() for the bus
+type of the device being woken up. The bus type's callback is then _fully_
+_responsible_ for handling the device as appropriate, which may, but need not
+include executing the device driver's ->runtime_resume() callback (from the PM
+core's point of view it is not necessary to implement a ->runtime_resume()
+callback in a device driver as long as the bus type's ->runtime_resume() knows
+what to do to handle the device).
+* Once the bus type's ->runtime_resume() callback has returned successfully,
+ the PM core regards the device as fully operational, which means that the
+ device _must_ be able to complete I/O operations as needed.
+* If the bus type's ->runtime_resume() callback returns -EBUSY or -EAGAIN, the
+ device's run-time PM status is set to RPM_SUSPENDED, which is supposed to mean
+ that the device will not communicate with the CPU(s) and RAM until the bus
+ type's ->runtime_resume() callback is executed for it.
+* If the bus type's ->runtime_resume() callback returns an error code different
+ from -EBUSY or -EAGAIN, the PM core regards this as an unrecoverable error and
+ will refuse to run the helper functions described in Section 1 until the
+ status is changed to either RPM_SUSPENDED or RPM_ACTIVE by the device's bus
+ type or driver.
+
+The ->runtime_idle() callback is executed by pm_runtime_suspend() for the bus
+type of a device the children of which are all suspended (or which has the
+'power.suspend_skip_children' flag set). The action carried out by this
+callback is totally dependent on the bus type in question, but the expected
+action is to check if the device can be suspended (i.e. if all of the conditions
+necessary for suspending the device are met) and to queue up a suspend request
+for the device if that is the case.
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
