On Wed, 17 Jun 2009, Rafael J. Wysocki wrote:
> Sorry for the broken patch. My mailer started to wordwrap messages
> automatically and I didn't notice.
>
> The correct patch is appended.
> Index: linux-2.6/include/linux/pm.h
> ===================================================================
> --- linux-2.6.orig/include/linux/pm.h
> +++ linux-2.6/include/linux/pm.h
> + * @runtime_suspend: Prepare the device for a condition in which it won't be
> + * able to communicate with the CPU(s) and RAM due to power management.
> + * This need not mean that the device should be put into a low power state,
> + * like for example when the device is behind a link, represented by a
Suggested rephrasing: For example, if the device is behind a link
which is about to be turned off, the device may remain at full power.
But if the device does go to low power and if device_may_wakeup(dev)
is true, enable remote wakeup.
> +/**
> + * Device run-time power management state.
> + *
> + * These state labels are used internally by the PM core to indicate the current
> + * status of a device with respect to the PM core operations. They do not
> + * reflect the actual power state of the device or its status as seen by the
> + * driver.
> + *
> + * RPM_ACTIVE Device is fully operational, no run-time PM requests are
> + * pending for it.
> + *
> + * RPM_IDLE It has been requested that the device be suspended.
> + * Suspend request has been put into the run-time PM
> + * workqueue and it's pending execution.
> + *
> + * RPM_SUSPENDING Device bus type's ->runtime_suspend() callback is being
> + * executed.
> + *
> + * RPM_SUSPENDED Device bus type's ->runtime_suspend() callback has
> + * completed successfully. The device is regarded as
> + * suspended.
> + *
> + * RPM_WAKE It has been requested that the device be woken up.
> + * Resume request has been put into the run-time PM
> + * workqueue and it's pending execution.
> + *
> + * RPM_RESUMING Device bus type's ->runtime_resume() callback is being
> + * executed.
> + *
> + * RPM_ERROR Represents a condition from which the PM core cannot
> + * recover by itself. If the device's run-time PM status
> + * field has this value, all of the run-time PM operations
> + * carried out for the device by the core will fail, until
> + * the status field is changed to either RPM_ACTIVE or
> + * RPM_SUSPENDED (it is not valid to use the other values
> + * in such a situation) by the device's driver or bus type.
> + * This happens when the device bus type's
> + * ->runtime_suspend() or ->runtime_resume() callback
> + * returns error code different from -EAGAIN or -EBUSY.
What about RPM_GRACE?
> + */
> +
> +#define RPM_ACTIVE 0
> +#define RPM_IDLE 0x01
> +#define RPM_SUSPENDING 0x02
> +#define RPM_SUSPENDED 0x04
> +#define RPM_WAKE 0x08
> +#define RPM_RESUMING 0x10
> +#define RPM_GRACE 0x20
> +#define RPM_ERROR (-1)
This won't work very well when assigned to an unsigned 6-bit field.
> +
> +#define RPM_IN_SUSPEND (RPM_SUSPENDING | RPM_SUSPENDED)
> +#define RPM_INACTIVE (RPM_IDLE | RPM_IN_SUSPEND)
> +#define RPM_NO_SUSPEND (RPM_WAKE | RPM_RESUMING | RPM_GRACE)
> +#define RPM_IN_PROGRESS (RPM_SUSPENDING | RPM_RESUMING)
Since each of these is used only once, it would be better not to
define them as macros. Use the parenthesized expression instead; this
will be easier for readers to understand.
> +/**
> + * __pm_runtime_change_status - Change the run-time PM status of a device.
> + * @dev: Device to handle.
> + * @status: Expected current run-time PM status of the device.
> + * @new_status: New value of the device's run-time PM status.
> + *
> + * Change the run-time PM status of the device to @new_status if its current
> + * value is equal to @status.
> + */
> +void __pm_runtime_change_status(struct device *dev, unsigned int status,
If RPM_ERROR is -1 then status better not be unsigned.
> + unsigned int new_status)
> +{
> + unsigned long flags;
> +
> + if (atomic_read(&dev->power.depth) > 0)
> + return;
Return only if new_status == RPM_SUSPENDED. Is this routine ever
called with status equal to anything other than RPM_ERROR?
+/**
+ * pm_check_children - Check if all children of a device have been suspended.
+ * @dev: Device to check.
+ *
+ * Returns 0 if all children of the device have been suspended or -EBUSY
+ * otherwise.
+ */
+static int pm_check_children(struct device *dev)
+{
+ return dev->power.suspend_skip_children ? 0 :
+ device_for_each_child(dev, NULL, pm_device_suspended);
+}
Instead of a costly device_for_each_child(), would it be better to
maintain a counter with the number of unsuspended children?
> +/**
> + * __pm_runtime_suspend - Run a device bus type's runtime_suspend() callback.
> + * @dev: Device to suspend.
> + * @sync: If unset, the funtion has been called via pm_wq.
> + *
> + * Check if the status of the device is appropriate and run the
> + * ->runtime_suspend() callback provided by the device's bus type driver.
> + * Update the run-time PM flags in the device object to reflect the current
> + * status of the device.
> + */
> +int __pm_runtime_suspend(struct device *dev, bool sync)
> +{
> + int error = -EINVAL;
> +
> + if (atomic_read(&dev->power.depth) > 0)
> + return -EBUSY;
Should this test be made inside the scope of the spinlock?
For that matter, should power.depth always be set within the spinlock?
If it is then it doesn't need to be an atomic_t.
> +
> + spin_lock(&dev->power.lock);
Should be spin_lock_irq(). Same in other places.
> +
> + if (dev->power.runtime_status == RPM_ERROR) {
> + goto out;
> + } else if (dev->power.runtime_status & RPM_SUSPENDED) {
> + error = 0;
> + goto out;
> + } else if ((dev->power.runtime_status & RPM_NO_SUSPEND)
> + || (!sync && dev->power.suspend_aborted)) {
> + /*
> + * Device is resuming or in a post-resume grace period or
> + * there's a resume request pending, or a pending suspend
> + * request has just been cancelled and we're running as a result
> + * of this request.
> + */
In the sync case, it might be better to wait until the ongoing resume
(or resume grace period) is finished and then do the suspend.
Of course, this depends on the context in which the synchronous
runtime suspend is carried out. Right now, the only such context I
know of is when the user tells the system to force a USB device into a
suspended state.
> + error = -EAGAIN;
> + goto out;
> + } else if (dev->power.runtime_status == RPM_SUSPENDING) {
> + spin_unlock(&dev->power.lock);
> +
> + /*
> + * Another suspend is running in parallel with us. Wait for it
> + * to complete and return.
> + */
> + wait_for_completion(&dev->power.work_done);
> +
> + return dev->power.runtime_error;
> + } else if (pm_check_children(dev)) {
> + /*
> + * We can only suspend the device if all of its children have
> + * been suspended.
> + */
> + dev->power.runtime_status = RPM_ACTIVE;
> + error = -EAGAIN;
-EBUSY would be more appropriate.
> + goto out;
> + }
> +/**
> + * pm_cancel_suspend - Cancel a pending suspend request for given device.
> + * @dev: Device to cancel the suspend request for.
> + */
> +static void pm_cancel_suspend(struct device *dev)
> +{
> + cancel_delayed_work(&dev->power.runtime_work);
> + dev->power.runtime_status &= RPM_GRACE;
This looks strange. Aren't we guaranteed at this point that the
status is RPM_IDLE?
> + dev->power.suspend_aborted = true;
> +}
> +
> +/**
> + * __pm_runtime_resume - Run a device bus type's runtime_resume() callback.
> + * @dev: Device to resume.
> + * @grace: If set, force a post-resume grace period.
> + *
> + * Check if the device is really suspended and run the ->runtime_resume()
> + * callback provided by the device's bus type driver. Update the run-time PM
> + * flags in the device object to reflect the current status of the device. If
> + * runtime suspend is in progress while this function is being run, wait for it
> + * to finish before resuming the device. If runtime suspend is scheduled, but
> + * it hasn't started yet, cancel it and we're done.
> + */
> +int __pm_runtime_resume(struct device *dev, bool grace)
> +{
> + int error = -EINVAL;
...
> + } else if (dev->power.runtime_status == RPM_SUSPENDED && dev->parent
> + && (dev->parent->power.runtime_status & ~RPM_GRACE)) {
> + spin_unlock(&dev->power.lock);
Here's where you want to increment the parent's depth. Figuring out
where to decrement it again isn't easy, given the way this routine is
structured.
> + spin_unlock(&dev->parent->power.lock);
> +
> + /* The device's parent is not active. Resume it and repeat. */
> + error = __pm_runtime_resume(dev->parent, false);
> + if (error)
> + return error;
Need to reset error to -EINVAL.
> +/**
> + * pm_request_resume - Schedule run-time resume of given device.
> + * @dev: Device to resume.
> + * @grace: If set, force a post-resume grace period.
> + */
> +void __pm_request_resume(struct device *dev, bool grace)
> +{
> + unsigned long parent_flags = 0, flags;
> +
> + repeat:
> + if (atomic_read(&dev->power.depth) > 0)
> + return;
> +
> + if (dev->parent)
> + spin_lock_irqsave(&dev->parent->power.lock, parent_flags);
> + spin_lock_irqsave(&dev->power.lock, flags);
> +
> + if (dev->power.runtime_status == RPM_IDLE) {
> + /* Autosuspend request is pending, no need to resume. */
> + pm_cancel_suspend(dev);
> + if (grace)
> + dev->power.runtime_status |= RPM_GRACE;
> + goto out;
> + } else if (!(dev->power.runtime_status & RPM_IN_SUSPEND)) {
> + goto out;
> + } else if (dev->parent
> + && (dev->parent->power.runtime_status & RPM_INACTIVE)) {
> + spin_unlock_irqrestore(&dev->power.lock, flags);
> + spin_unlock_irqrestore(&dev->parent->power.lock, parent_flags);
> +
> + /* The parent is suspending, suspended or idle. Wake it up. */
> + __pm_request_resume(dev->parent, false);
> +
> + goto repeat;
What if the parent's state is RPM_SUSPENDING? Won't this go into a
tight loop? You need to test the parent's WAKEUP bit above.
> Index: linux-2.6/Documentation/power/runtime_pm.txt
> ===================================================================
> --- /dev/null
> +++ linux-2.6/Documentation/power/runtime_pm.txt
> @@ -0,0 +1,311 @@
> +Run-time Power Management Framework for I/O Devices
> +
> +(C) 2009 Rafael J. Wysocki <rjw@xxxxxxx>, Novell Inc.
> +
> +1. Introduction
> +
> +The support for run-time power management (run-time PM) of I/O devices is
s/The support/Support/
> +provided at the power management core (PM core) level by means of:
> +pm_runtime_enable() and pm_runtime_disable() are used to enable and disable,
> +respectively, all of the run-time PM core operations. They do it by decreasing
> +and increasing, respectively, the 'power.depth' field of 'struct device'. If
> +the value of this field is greater than 0, pm_runtime_suspend(),
> +pm_request_suspend(), pm_runtime_resume() and so on return immediately without
> +doing anything and -EBUSY is returned by pm_runtime_suspend(),
> +pm_runtime_resume() and pm_runtime_resume_grace(). Therefore, if
In your code, pm_runtime_disable() doesn't actually do a resume. So if
a driver wants to make sure a device is at full power and stays that
way, it has to call:
pm_runtime_resume(dev);
pm_runtime_disable(dev);
This is a race; another thread might suspend the device in between.
It would make more sense to have have pm_runtime_resume() function
normally even when depth > 0. Then the calls could be made in the
opposite order and there wouldn't be a race.
The equivalent code in USB does this automatically. The
runtime-disable routine does a resume if the depth value was
originally 0, and the runtime-enable routine queues a delayed
autosuspend request if the final depth value is 0.
> +pm_runtime_suspend(), pm_request_suspend(), pm_runtime_resume(),
> +pm_runtime_resume_grace(), pm_request_resume(), and pm_request_resume_grace()
> +use the 'power.runtime_status' and 'power.suspend_aborted' fields of
> +'struct device' for mutual synchronization. The 'power.runtime_status' field,
Strictly speaking, they use those fields for mutual cooperation. It's
the power.lock field which provides synchronization.
> +pm_runtime_suspend() is used to carry out a run-time suspend of an active
> +device. It is called directly by a bus type or device driver. An asynchronous
> +version of it is called by the PM core, to complete a request queued up by
> +pm_request_suspend(). The only difference between them is the handling of
> +situations when a queued up suspend request has just been cancelled. Apart from
> +this, they work in the same way.
> +* If the device is suspended (i.e. the RPM_SUSPENDED bit is set in the device's
> + run-time PM status field, 'power.runtime_status'), success is returned.
Blank lines surrounding the *-ed paragraphs would make this more
readable.
> +pm_request_resume() and pm_request_resume_grace() are used to queue up a resume
> +request for a device that is suspended, suspending or has a suspend request
> +pending. The difference between them is that pm_request_resume_grace() causes
> +the RPM_GRACE bit to be set in the device's run-time PM status field, which
> +prevents the PM core from suspending the device or queuing up a suspend request
> +for it until the RPM_GRACE bit is cleared with the help of pm_runtime_release().
> +Apart from this, they work in the same way.
Is RPM_GRACE really needed? Can't we accomplish more or less the same
thing by using the autosuspend delay combined with the depth counter?
Alan Stern
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
