This patch add's TuxOnIce's block I/O engine. It expects an allocator to
pass it a list of one or more block devices and for each device a list
of blocks on that device in which an image can be stored. It treats the
whole lot as one big 'tape', and supports asynchronous, multithreaded
I/O (readahead at resume time) to that storage. It excepts an image to
consist of three parts - the header, pages atomically copied ('pageset
1') and pages saved prior to the atomic copy ('pageset 2') and remembers
where each section begins (this information is saved in the image
header). Throughput is throttled to the amount done on average in 1/2s
since we started I/O. Synchronous I/O is also supported - it's mainly
used for reading the signature.
Signed-off-by: Nigel Cunningham <nigel@xxxxxxxxxxxx>
---
kernel/power/tuxonice_block_io.c | 1319 ++++++++++++++++++++++++++++++++++++++
kernel/power/tuxonice_block_io.h | 59 ++
2 files changed, 1378 insertions(+), 0 deletions(-)
create mode 100644 kernel/power/tuxonice_block_io.c
create mode 100644 kernel/power/tuxonice_block_io.h
diff --git a/kernel/power/tuxonice_block_io.c b/kernel/power/tuxonice_block_io.c
new file mode 100644
index 0000000..c1936f4
--- /dev/null
+++ b/kernel/power/tuxonice_block_io.c
@@ -0,0 +1,1319 @@
+/*
+ * kernel/power/tuxonice_block_io.c
+ *
+ * Copyright (C) 2004-2008 Nigel Cunningham (nigel at tuxonice net)
+ *
+ * Distributed under GPLv2.
+ *
+ * This file contains block io functions for TuxOnIce. These are
+ * used by the swapwriter and it is planned that they will also
+ * be used by the NFSwriter.
+ *
+ */
+
+#include <linux/blkdev.h>
+#include <linux/syscalls.h>
+#include <linux/suspend.h>
+
+#include "tuxonice.h"
+#include "tuxonice_sysfs.h"
+#include "tuxonice_modules.h"
+#include "tuxonice_prepare_image.h"
+#include "tuxonice_block_io.h"
+#include "tuxonice_ui.h"
+#include "tuxonice_alloc.h"
+#include "tuxonice_io.h"
+
+#define MEMORY_ONLY 1
+#define THROTTLE_WAIT 2
+
+/* #define MEASURE_MUTEX_CONTENTION */
+#ifndef MEASURE_MUTEX_CONTENTION
+#define my_mutex_lock(index, the_lock) mutex_lock(the_lock)
+#define my_mutex_unlock(index, the_lock) mutex_unlock(the_lock)
+#else
+unsigned long mutex_times[2][2][NR_CPUS];
+#define my_mutex_lock(index, the_lock) do { \
+ int have_mutex; \
+ have_mutex = mutex_trylock(the_lock); \
+ if (!have_mutex) { \
+ mutex_lock(the_lock); \
+ mutex_times[index][0][smp_processor_id()]++; \
+ } else { \
+ mutex_times[index][1][smp_processor_id()]++; \
+ }
+
+#define my_mutex_unlock(index, the_lock) \
+ mutex_unlock(the_lock); \
+} while (0)
+#endif
+
+static int target_outstanding_io = 1024;
+static int max_outstanding_writes, max_outstanding_reads;
+
+static struct page *bio_queue_head, *bio_queue_tail;
+static atomic_t toi_bio_queue_size;
+static DEFINE_SPINLOCK(bio_queue_lock);
+
+static int free_mem_throttle, throughput_throttle;
+static int more_readahead = 1;
+static struct page *readahead_list_head, *readahead_list_tail;
+static DECLARE_WAIT_QUEUE_HEAD(readahead_list_wait);
+
+static struct page *waiting_on;
+
+static atomic_t toi_io_in_progress, toi_io_done;
+static DECLARE_WAIT_QUEUE_HEAD(num_in_progress_wait);
+
+static int extra_page_forward;
+
+static int current_stream;
+/* 0 = Header, 1 = Pageset1, 2 = Pageset2, 3 = End of PS1 */
+struct hibernate_extent_iterate_saved_state toi_writer_posn_save[4];
+
+/* Pointer to current entry being loaded/saved. */
+struct toi_extent_iterate_state toi_writer_posn;
+
+/* Not static, so that the allocators can setup and complete
+ * writing the header */
+char *toi_writer_buffer;
+int toi_writer_buffer_posn;
+
+static struct toi_bdev_info *toi_devinfo;
+
+static DEFINE_MUTEX(toi_bio_mutex);
+static DEFINE_MUTEX(toi_bio_readahead_mutex);
+
+static struct task_struct *toi_queue_flusher;
+static int toi_bio_queue_flush_pages(int dedicated_thread);
+
+#define TOTAL_OUTSTANDING_IO (atomic_read(&toi_io_in_progress) + \
+ atomic_read(&toi_bio_queue_size))
+
+/**
+ * set_free_mem_throttle - set the point where we pause to avoid oom.
+ *
+ * Initially, this value is zero, but when we first fail to allocate memory,
+ * we set it (plus a buffer) and thereafter throttle i/o once that limit is
+ * reached.
+ **/
+static void set_free_mem_throttle(void)
+{
+ int new_throttle = nr_unallocated_buffer_pages() + 256;
+
+ if (new_throttle > free_mem_throttle)
+ free_mem_throttle = new_throttle;
+}
+
+#define NUM_REASONS 7
+static atomic_t reasons[NUM_REASONS];
+static char *reason_name[NUM_REASONS] = {
+ "readahead not ready",
+ "bio allocation",
+ "synchronous I/O",
+ "toi_bio_get_new_page",
+ "memory low",
+ "readahead buffer allocation",
+ "throughput_throttle",
+};
+
+/**
+ * do_bio_wait - wait for some TuxOnIce I/O to complete
+ * @reason: The array index of the reason we're waiting.
+ *
+ * Wait for a particular page of I/O if we're after a particular page.
+ * If we're not after a particular page, wait instead for all in flight
+ * I/O to be completed or for us to have enough free memory to be able
+ * to submit more I/O.
+ *
+ * If we wait, we also update our statistics regarding why we waited.
+ **/
+static void do_bio_wait(int reason)
+{
+ struct page *was_waiting_on = waiting_on;
+
+ /* On SMP, waiting_on can be reset, so we make a copy */
+ if (was_waiting_on) {
+ if (PageLocked(was_waiting_on)) {
+ wait_on_page_bit(was_waiting_on, PG_locked);
+ atomic_inc(&reasons[reason]);
+ }
+ } else {
+ atomic_inc(&reasons[reason]);
+
+ wait_event(num_in_progress_wait,
+ !atomic_read(&toi_io_in_progress) ||
+ nr_unallocated_buffer_pages() > free_mem_throttle);
+ }
+}
+
+/**
+ * throttle_if_needed - wait for I/O completion if throttle points are reached
+ * @flags: What to check and how to act.
+ *
+ * Check whether we need to wait for some I/O to complete. We always check
+ * whether we have enough memory available, but may also (depending upon
+ * @reason) check if the throughput throttle limit has been reached.
+ **/
+static int throttle_if_needed(int flags)
+{
+ int free_pages = nr_unallocated_buffer_pages();
+
+ /* Getting low on memory and I/O is in progress? */
+ while (unlikely(free_pages < free_mem_throttle) &&
+ atomic_read(&toi_io_in_progress)) {
+ if (!(flags & THROTTLE_WAIT))
+ return -ENOMEM;
+ do_bio_wait(4);
+ free_pages = nr_unallocated_buffer_pages();
+ }
+
+ while (!(flags & MEMORY_ONLY) && throughput_throttle &&
+ TOTAL_OUTSTANDING_IO >= throughput_throttle) {
+ int result = toi_bio_queue_flush_pages(0);
+ if (result)
+ return result;
+ atomic_inc(&reasons[6]);
+ wait_event(num_in_progress_wait,
+ !atomic_read(&toi_io_in_progress) ||
+ TOTAL_OUTSTANDING_IO < throughput_throttle);
+ }
+
+ return 0;
+}
+
+/**
+ * update_throughput_throttle - update the raw throughput throttle
+ * @jif_index: The number of times this function has been called.
+ *
+ * This function is called twice per second by the core, and used to limit the
+ * amount of I/O we submit at once, spreading out our waiting through the
+ * whole job and letting userui get an opportunity to do its work.
+ *
+ * We don't start limiting I/O until 1/2s has gone so that we get a
+ * decent sample for our initial limit, and keep updating it because
+ * throughput may vary (on rotating media, eg) with our block number.
+ *
+ * We throttle to 1/10s worth of I/O.
+ **/
+static void update_throughput_throttle(int jif_index)
+{
+ int done = atomic_read(&toi_io_done);
+ throughput_throttle = done / jif_index / 5;
+}
+
+/**
+ * toi_finish_all_io - wait for all outstanding i/o to complete
+ *
+ * Flush any queued but unsubmitted I/O and wait for it all to complete.
+ **/
+static int toi_finish_all_io(void)
+{
+ int result = toi_bio_queue_flush_pages(0);
+ wait_event(num_in_progress_wait, !TOTAL_OUTSTANDING_IO);
+ return result;
+}
+
+/**
+ * toi_end_bio - bio completion function.
+ * @bio: bio that has completed.
+ * @err: Error value. Yes, like end_swap_bio_read, we ignore it.
+ *
+ * Function called by the block driver from interrupt context when I/O is
+ * completed. If we were writing the page, we want to free it and will have
+ * set bio->bi_private to the parameter we should use in telling the page
+ * allocation accounting code what the page was allocated for. If we're
+ * reading the page, it will be in the singly linked list made from
+ * page->private pointers.
+ **/
+static void toi_end_bio(struct bio *bio, int err)
+{
+ struct page *page = bio->bi_io_vec[0].bv_page;
+
+ BUG_ON(!test_bit(BIO_UPTODATE, &bio->bi_flags));
+
+ unlock_page(page);
+ bio_put(bio);
+
+ if (waiting_on == page)
+ waiting_on = NULL;
+
+ put_page(page);
+
+ if (bio->bi_private)
+ toi__free_page((int) ((unsigned long) bio->bi_private) , page);
+
+ bio_put(bio);
+
+ atomic_dec(&toi_io_in_progress);
+ atomic_inc(&toi_io_done);
+
+ wake_up(&num_in_progress_wait);
+}
+
+/**
+ * submit - submit BIO request
+ * @writing: READ or WRITE.
+ * @dev: The block device we're using.
+ * @first_block: The first sector we're using.
+ * @page: The page being used for I/O.
+ * @free_group: If writing, the group that was used in allocating the page
+ * and which will be used in freeing the page from the completion
+ * routine.
+ *
+ * Based on Patrick Mochell's pmdisk code from long ago: "Straight from the
+ * textbook - allocate and initialize the bio. If we're writing, make sure
+ * the page is marked as dirty. Then submit it and carry on."
+ *
+ * If we're just testing the speed of our own code, we fake having done all
+ * the hard work and all toi_end_bio immediately.
+ **/
+static int submit(int writing, struct block_device *dev, sector_t first_block,
+ struct page *page, int free_group)
+{
+ struct bio *bio = NULL;
+ int cur_outstanding_io, result;
+
+ /*
+ * Shouldn't throttle if reading - can deadlock in the single
+ * threaded case as pages are only freed when we use the
+ * readahead.
+ */
+ if (writing) {
+ result = throttle_if_needed(MEMORY_ONLY | THROTTLE_WAIT);
+ if (result)
+ return result;
+ }
+
+ while (!bio) {
+ bio = bio_alloc(TOI_ATOMIC_GFP, 1);
+ if (!bio) {
+ set_free_mem_throttle();
+ do_bio_wait(1);
+ }
+ }
+
+ bio->bi_bdev = dev;
+ bio->bi_sector = first_block;
+ bio->bi_private = (void *) ((unsigned long) free_group);
+ bio->bi_end_io = toi_end_bio;
+
+ if (bio_add_page(bio, page, PAGE_SIZE, 0) < PAGE_SIZE) {
+ printk(KERN_DEBUG "ERROR: adding page to bio at %lld\n",
+ (unsigned long long) first_block);
+ bio_put(bio);
+ return -EFAULT;
+ }
+
+ bio_get(bio);
+
+ cur_outstanding_io = atomic_add_return(1, &toi_io_in_progress);
+ if (writing) {
+ if (cur_outstanding_io > max_outstanding_writes)
+ max_outstanding_writes = cur_outstanding_io;
+ } else {
+ if (cur_outstanding_io > max_outstanding_reads)
+ max_outstanding_reads = cur_outstanding_io;
+ }
+
+
+ if (unlikely(test_action_state(TOI_TEST_FILTER_SPEED))) {
+ /* Fake having done the hard work */
+ set_bit(BIO_UPTODATE, &bio->bi_flags);
+ toi_end_bio(bio, 0);
+ } else
+ submit_bio(writing | (1 << BIO_RW_SYNCIO) |
+ (1 << BIO_RW_UNPLUG), bio);
+
+ return 0;
+}
+
+/**
+ * toi_do_io: Prepare to do some i/o on a page and submit or batch it.
+ *
+ * @writing: Whether reading or writing.
+ * @bdev: The block device which we're using.
+ * @block0: The first sector we're reading or writing.
+ * @page: The page on which I/O is being done.
+ * @readahead_index: If doing readahead, the index (reset this flag when done).
+ * @syncio: Whether the i/o is being done synchronously.
+ *
+ * Prepare and start a read or write operation.
+ *
+ * Note that we always work with our own page. If writing, we might be given a
+ * compression buffer that will immediately be used to start compressing the
+ * next page. For reading, we do readahead and therefore don't know the final
+ * address where the data needs to go.
+ **/
+static int toi_do_io(int writing, struct block_device *bdev, long block0,
+ struct page *page, int is_readahead, int syncio, int free_group)
+{
+ page->private = 0;
+
+ /* Do here so we don't race against toi_bio_get_next_page_read */
+ lock_page(page);
+
+ if (is_readahead) {
+ if (readahead_list_head)
+ readahead_list_tail->private = (unsigned long) page;
+ else
+ readahead_list_head = page;
+
+ readahead_list_tail = page;
+ wake_up(&readahead_list_wait);
+ }
+
+ /* Done before submitting to avoid races. */
+ if (syncio)
+ waiting_on = page;
+
+ /* Submit the page */
+ get_page(page);
+
+ if (submit(writing, bdev, block0, page, free_group))
+ return -EFAULT;
+
+ if (syncio)
+ do_bio_wait(2);
+
+ return 0;
+}
+
+/**
+ * toi_bdev_page_io - simpler interface to do directly i/o on a single page
+ * @writing: Whether reading or writing.
+ * @bdev: Block device on which we're operating.
+ * @pos: Sector at which page to read or write starts.
+ * @page: Page to be read/written.
+ *
+ * A simple interface to submit a page of I/O and wait for its completion.
+ * The caller must free the page used.
+ **/
+static int toi_bdev_page_io(int writing, struct block_device *bdev,
+ long pos, struct page *page)
+{
+ return toi_do_io(writing, bdev, pos, page, 0, 1, 0);
+}
+
+/**
+ * toi_bio_memory_needed - report the amount of memory needed for block i/o
+ *
+ * We want to have at least enough memory so as to have target_outstanding_io
+ * or more transactions on the fly at once. If we can do more, fine.
+ **/
+static int toi_bio_memory_needed(void)
+{
+ return target_outstanding_io * (PAGE_SIZE + sizeof(struct request) +
+ sizeof(struct bio));
+}
+
+/**
+ * toi_bio_print_debug_stats - put out debugging info in the buffer provided
+ * @buffer: A buffer of size @size into which text should be placed.
+ * @size: The size of @buffer.
+ *
+ * Fill a buffer with debugging info. This is used for both our debug_info sysfs
+ * entry and for recording the same info in dmesg.
+ **/
+static int toi_bio_print_debug_stats(char *buffer, int size)
+{
+ int len = scnprintf(buffer, size, "- Max outstanding reads %d. Max "
+ "writes %d.\n", max_outstanding_reads,
+ max_outstanding_writes);
+
+ len += scnprintf(buffer + len, size - len,
+ " Memory_needed: %d x (%lu + %u + %u) = %d bytes.\n",
+ target_outstanding_io,
+ PAGE_SIZE, (unsigned int) sizeof(struct request),
+ (unsigned int) sizeof(struct bio), toi_bio_memory_needed());
+
+#ifdef MEASURE_MUTEX_CONTENTION
+ {
+ int i;
+
+ len += scnprintf(buffer + len, size - len,
+ " Mutex contention while reading:\n Contended Free\n");
+
+ for_each_online_cpu(i)
+ len += scnprintf(buffer + len, size - len,
+ " %9lu %9lu\n",
+ mutex_times[0][0][i], mutex_times[0][1][i]);
+
+ len += scnprintf(buffer + len, size - len,
+ " Mutex contention while writing:\n Contended Free\n");
+
+ for_each_online_cpu(i)
+ len += scnprintf(buffer + len, size - len,
+ " %9lu %9lu\n",
+ mutex_times[1][0][i], mutex_times[1][1][i]);
+
+ }
+#endif
+
+ return len + scnprintf(buffer + len, size - len,
+ " Free mem throttle point reached %d.\n", free_mem_throttle);
+}
+
+/**
+ * toi_set_devinfo - set the bdev info used for i/o
+ * @info: Pointer to an array of struct toi_bdev_info - the list of
+ * bdevs and blocks on them in which the image is stored.
+ *
+ * Set the list of bdevs and blocks in which the image will be stored.
+ * Think of them (all together) as one long tape on which the data will be
+ * stored.
+ **/
+static void toi_set_devinfo(struct toi_bdev_info *info)
+{
+ toi_devinfo = info;
+}
+
+/**
+ * dump_block_chains - print the contents of the bdev info array.
+ **/
+static void dump_block_chains(void)
+{
+ int i;
+
+ for (i = 0; i < toi_writer_posn.num_chains; i++) {
+ struct hibernate_extent *this;
+
+ this = (toi_writer_posn.chains + i)->first;
+
+ if (!this)
+ continue;
+
+ printk(KERN_DEBUG "Chain %d:", i);
+
+ while (this) {
+ printk(" [%lu-%lu]%s", this->start,
+ this->end, this->next ? "," : "");
+ this = this->next;
+ }
+
+ printk("\n");
+ }
+
+ for (i = 0; i < 4; i++)
+ printk(KERN_DEBUG "Posn %d: Chain %d, extent %d, offset %lu.\n",
+ i, toi_writer_posn_save[i].chain_num,
+ toi_writer_posn_save[i].extent_num,
+ toi_writer_posn_save[i].offset);
+}
+
+static int total_header_bytes;
+static int unowned;
+
+static int debug_broken_header(void)
+{
+ printk(KERN_DEBUG "Image header too big for size allocated!\n");
+ print_toi_header_storage_for_modules();
+ printk(KERN_DEBUG "Page flags : %d.\n", toi_pageflags_space_needed());
+ printk(KERN_DEBUG "toi_header : %ld.\n", sizeof(struct toi_header));
+ printk(KERN_DEBUG "Total unowned : %d.\n", unowned);
+ printk(KERN_DEBUG "Total used : %d (%ld pages).\n", total_header_bytes,
+ DIV_ROUND_UP(total_header_bytes, PAGE_SIZE));
+ printk(KERN_DEBUG "Space needed now : %ld.\n",
+ get_header_storage_needed());
+ dump_block_chains();
+ abort_hibernate(TOI_HEADER_TOO_BIG, "Header reservation too small.");
+ return -EIO;
+}
+
+/**
+ * go_next_page - skip blocks to the start of the next page
+ * @writing: Whether we're reading or writing the image.
+ *
+ * Go forward one page, or two if extra_page_forward is set. It only gets
+ * set at the start of reading the image header, to skip the first page
+ * of the header, which is read without using the extent chains.
+ **/
+static int go_next_page(int writing, int section_barrier)
+{
+ int i, chain_num = toi_writer_posn.current_chain,
+ max = (chain_num == -1) ? 1 : toi_devinfo[chain_num].blocks_per_page,
+ compare_to = 0, compare_chain, compare_offset;
+
+ /* Have we already used the last page of the stream? */
+ switch (current_stream) {
+ case 0:
+ compare_to = 2;
+ break;
+ case 1:
+ compare_to = 3;
+ break;
+ case 2:
+ compare_to = 1;
+ break;
+ }
+
+ compare_chain = toi_writer_posn_save[compare_to].chain_num;
+ compare_offset = toi_writer_posn_save[compare_to].offset;
+
+ if (section_barrier && chain_num == compare_chain &&
+ toi_writer_posn.current_offset == compare_offset) {
+ if (writing) {
+ if (!current_stream)
+ return debug_broken_header();
+ } else {
+ more_readahead = 0;
+ return -ENODATA;
+ }
+ }
+
+ /* Nope. Go foward a page - or maybe two */
+ for (i = 0; i < max; i++)
+ toi_extent_state_next(&toi_writer_posn);
+
+ if (toi_extent_state_eof(&toi_writer_posn)) {
+ /* Don't complain if readahead falls off the end */
+ if (writing && section_barrier) {
+ printk(KERN_DEBUG "Extent state eof. "
+ "Expected compression ratio too optimistic?\n");
+ dump_block_chains();
+ }
+ return -ENODATA;
+ }
+
+ if (extra_page_forward) {
+ extra_page_forward = 0;
+ return go_next_page(writing, section_barrier);
+ }
+
+ return 0;
+}
+
+/**
+ * set_extra_page_forward - make us skip an extra page on next go_next_page
+ *
+ * Used in reading header, to jump to 2nd page after getting 1st page
+ * direct from image header.
+ **/
+static void set_extra_page_forward(void)
+{
+ extra_page_forward = 1;
+}
+
+/**
+ * toi_bio_rw_page - do i/o on the next disk page in the image
+ * @writing: Whether reading or writing.
+ * @page: Page to do i/o on.
+ * @is_readahead: Whether we're doing readahead
+ * @free_group: The group used in allocating the page
+ *
+ * Submit a page for reading or writing, possibly readahead.
+ * Pass the group used in allocating the page as well, as it should
+ * be freed on completion of the bio if we're writing the page.
+ **/
+static int toi_bio_rw_page(int writing, struct page *page,
+ int is_readahead, int free_group)
+{
+ struct toi_bdev_info *dev_info;
+ int result = go_next_page(writing, 1);
+
+ if (result)
+ return result;
+
+ dev_info = &toi_devinfo[toi_writer_posn.current_chain];
+
+ return toi_do_io(writing, dev_info->bdev,
+ toi_writer_posn.current_offset <<
+ dev_info->bmap_shift,
+ page, is_readahead, 0, free_group);
+}
+
+/**
+ * toi_rw_init - prepare to read or write a stream in the image
+ * @writing: Whether reading or writing.
+ * @stream number: Section of the image being processed.
+ *
+ * Prepare to read or write a section ('stream') in the image.
+ **/
+static int toi_rw_init(int writing, int stream_number)
+{
+ if (stream_number)
+ toi_extent_state_restore(&toi_writer_posn,
+ &toi_writer_posn_save[stream_number]);
+ else
+ toi_extent_state_goto_start(&toi_writer_posn);
+
+ atomic_set(&toi_io_done, 0);
+ toi_writer_buffer = (char *) toi_get_zeroed_page(11, TOI_ATOMIC_GFP);
+ toi_writer_buffer_posn = writing ? 0 : PAGE_SIZE;
+
+ current_stream = stream_number;
+
+ more_readahead = 1;
+
+ return toi_writer_buffer ? 0 : -ENOMEM;
+}
+
+/**
+ * toi_read_header_init - prepare to read the image header
+ *
+ * Reset readahead indices prior to starting to read a section of the image.
+ **/
+static void toi_read_header_init(void)
+{
+ toi_writer_buffer = (char *) toi_get_zeroed_page(11, TOI_ATOMIC_GFP);
+ more_readahead = 1;
+}
+
+/**
+ * toi_bio_queue_write - queue a page for writing
+ * @full_buffer: Pointer to a page to be queued
+ *
+ * Add a page to the queue to be submitted. If we're the queue flusher,
+ * we'll do this once we've dropped toi_bio_mutex, so other threads can
+ * continue to submit I/O while we're on the slow path doing the actual
+ * submission.
+ **/
+static void toi_bio_queue_write(char **full_buffer)
+{
+ struct page *page = virt_to_page(*full_buffer);
+ unsigned long flags;
+
+ page->private = 0;
+
+ spin_lock_irqsave(&bio_queue_lock, flags);
+ if (!bio_queue_head)
+ bio_queue_head = page;
+ else
+ bio_queue_tail->private = (unsigned long) page;
+
+ bio_queue_tail = page;
+ atomic_inc(&toi_bio_queue_size);
+
+ spin_unlock_irqrestore(&bio_queue_lock, flags);
+ wake_up(&toi_io_queue_flusher);
+
+ *full_buffer = NULL;
+}
+
+/**
+ * toi_rw_cleanup - Cleanup after i/o.
+ * @writing: Whether we were reading or writing.
+ *
+ * Flush all I/O and clean everything up after reading or writing a
+ * section of the image.
+ **/
+static int toi_rw_cleanup(int writing)
+{
+ int i, result;
+
+ if (writing) {
+ int result;
+
+ if (toi_writer_buffer_posn && !test_result_state(TOI_ABORTED))
+ toi_bio_queue_write(&toi_writer_buffer);
+
+ result = toi_bio_queue_flush_pages(0);
+
+ if (result)
+ return result;
+
+ if (current_stream == 2)
+ toi_extent_state_save(&toi_writer_posn,
+ &toi_writer_posn_save[1]);
+ else if (current_stream == 1)
+ toi_extent_state_save(&toi_writer_posn,
+ &toi_writer_posn_save[3]);
+ }
+
+ result = toi_finish_all_io();
+
+ while (readahead_list_head) {
+ void *next = (void *) readahead_list_head->private;
+ toi__free_page(12, readahead_list_head);
+ readahead_list_head = next;
+ }
+
+ readahead_list_tail = NULL;
+
+ if (!current_stream)
+ return result;
+
+ for (i = 0; i < NUM_REASONS; i++) {
+ if (!atomic_read(&reasons[i]))
+ continue;
+ printk(KERN_DEBUG "Waited for i/o due to %s %d times.\n",
+ reason_name[i], atomic_read(&reasons[i]));
+ atomic_set(&reasons[i], 0);
+ }
+
+ current_stream = 0;
+ return result;
+}
+
+/**
+ * toi_start_one_readahead - start one page of readahead
+ * @dedicated_thread: Is this a thread dedicated to doing readahead?
+ *
+ * Start one new page of readahead. If this is being called by a thread
+ * whose only just is to submit readahead, don't quit because we failed
+ * to allocate a page.
+ **/
+static int toi_start_one_readahead(int dedicated_thread)
+{
+ char *buffer = NULL;
+ int oom = 0, result;
+
+ result = throttle_if_needed(dedicated_thread ? THROTTLE_WAIT : 0);
+ if (result)
+ return result;
+
+ mutex_lock(&toi_bio_readahead_mutex);
+
+ while (!buffer) {
+ buffer = (char *) toi_get_zeroed_page(12,
+ TOI_ATOMIC_GFP);
+ if (!buffer) {
+ if (oom && !dedicated_thread) {
+ mutex_unlock(&toi_bio_readahead_mutex);
+ return -ENOMEM;
+ }
+
+ oom = 1;
+ set_free_mem_throttle();
+ do_bio_wait(5);
+ }
+ }
+
+ result = toi_bio_rw_page(READ, virt_to_page(buffer), 1, 0);
+ mutex_unlock(&toi_bio_readahead_mutex);
+ return result;
+}
+
+/**
+ * toi_start_new_readahead - start new readahead
+ * @dedicated_thread: Are we dedicated to this task?
+ *
+ * Start readahead of image pages.
+ *
+ * We can be called as a thread dedicated to this task (may be helpful on
+ * systems with lots of CPUs), in which case we don't exit until there's no
+ * more readahead.
+ *
+ * If this is not called by a dedicated thread, we top up our queue until
+ * there's no more readahead to submit, we've submitted the number given
+ * in target_outstanding_io or the number in progress exceeds the target
+ * outstanding I/O value.
+ *
+ * No mutex needed because this is only ever called by the first cpu.
+ **/
+static int toi_start_new_readahead(int dedicated_thread)
+{
+ int last_result, num_submitted = 0;
+
+ /* Start a new readahead? */
+ if (!more_readahead)
+ return 0;
+
+ do {
+ last_result = toi_start_one_readahead(dedicated_thread);
+
+ if (last_result) {
+ if (last_result == -ENOMEM || last_result == -ENODATA)
+ return 0;
+
+ printk(KERN_DEBUG
+ "Begin read chunk returned %d.\n",
+ last_result);
+ } else
+ num_submitted++;
+
+ } while (more_readahead && !last_result &&
+ (dedicated_thread ||
+ (num_submitted < target_outstanding_io &&
+ atomic_read(&toi_io_in_progress) < target_outstanding_io)));
+
+ return last_result;
+}
+
+/**
+ * bio_io_flusher - start the dedicated I/O flushing routine
+ * @writing: Whether we're writing the image.
+ **/
+static int bio_io_flusher(int writing)
+{
+
+ if (writing)
+ return toi_bio_queue_flush_pages(1);
+ else
+ return toi_start_new_readahead(1);
+}
+
+/**
+ * toi_bio_get_next_page_read - read a disk page, perhaps with readahead
+ * @no_readahead: Whether we can use readahead
+ *
+ * Read a page from disk, submitting readahead and cleaning up finished i/o
+ * while we wait for the page we're after.
+ **/
+static int toi_bio_get_next_page_read(int no_readahead)
+{
+ unsigned long *virt;
+ struct page *next;
+
+ /*
+ * When reading the second page of the header, we have to
+ * delay submitting the read until after we've gotten the
+ * extents out of the first page.
+ */
+ if (unlikely(no_readahead && toi_start_one_readahead(0))) {
+ printk(KERN_DEBUG "No readahead and toi_start_one_readahead "
+ "returned non-zero.\n");
+ return -EIO;
+ }
+
+ if (unlikely(!readahead_list_head)) {
+ BUG_ON(!more_readahead);
+ if (unlikely(toi_start_one_readahead(0))) {
+ printk(KERN_DEBUG "No readahead and "
+ "toi_start_one_readahead returned non-zero.\n");
+ return -EIO;
+ }
+ }
+
+ if (PageLocked(readahead_list_head)) {
+ waiting_on = readahead_list_head;
+ do_bio_wait(0);
+ }
+
+ virt = page_address(readahead_list_head);
+ memcpy(toi_writer_buffer, virt, PAGE_SIZE);
+
+ next = (struct page *) readahead_list_head->private;
+ toi__free_page(12, readahead_list_head);
+ readahead_list_head = next;
+ return 0;
+}
+
+/**
+ * toi_bio_queue_flush_pages - flush the queue of pages queued for writing
+ * @dedicated_thread: Whether we're a dedicated thread
+ *
+ * Flush the queue of pages ready to be written to disk.
+ *
+ * If we're a dedicated thread, stay in here until told to leave,
+ * sleeping in wait_event.
+ *
+ * The first thread is normally the only one to come in here. Another
+ * thread can enter this routine too, though, via throttle_if_needed.
+ * Since that's the case, we must be careful to only have one thread
+ * doing this work at a time. Otherwise we have a race and could save
+ * pages out of order.
+ *
+ * If an error occurs, free all remaining pages without submitting them
+ * for I/O.
+ **/
+
+int toi_bio_queue_flush_pages(int dedicated_thread)
+{
+ unsigned long flags;
+ int result = 0;
+ static int busy;
+
+ if (busy)
+ return 0;
+
+ busy = 1;
+
+top:
+ spin_lock_irqsave(&bio_queue_lock, flags);
+ while (bio_queue_head) {
+ struct page *page = bio_queue_head;
+ bio_queue_head = (struct page *) page->private;
+ if (bio_queue_tail == page)
+ bio_queue_tail = NULL;
+ atomic_dec(&toi_bio_queue_size);
+ spin_unlock_irqrestore(&bio_queue_lock, flags);
+ if (!result)
+ result = toi_bio_rw_page(WRITE, page, 0, 11);
+ if (result)
+ toi__free_page(11 , page);
+ spin_lock_irqsave(&bio_queue_lock, flags);
+ }
+ spin_unlock_irqrestore(&bio_queue_lock, flags);
+
+ if (dedicated_thread) {
+ wait_event(toi_io_queue_flusher, bio_queue_head ||
+ toi_bio_queue_flusher_should_finish);
+ if (likely(!toi_bio_queue_flusher_should_finish))
+ goto top;
+ toi_bio_queue_flusher_should_finish = 0;
+ }
+
+ busy = 0;
+ return result;
+}
+
+/**
+ * toi_bio_get_new_page - get a new page for I/O
+ * @full_buffer: Pointer to a page to allocate.
+ **/
+static int toi_bio_get_new_page(char **full_buffer)
+{
+ int result = throttle_if_needed(THROTTLE_WAIT);
+ if (result)
+ return result;
+
+ while (!*full_buffer) {
+ *full_buffer = (char *) toi_get_zeroed_page(11, TOI_ATOMIC_GFP);
+ if (!*full_buffer) {
+ set_free_mem_throttle();
+ do_bio_wait(3);
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * toi_rw_buffer - combine smaller buffers into PAGE_SIZE I/O
+ * @writing: Bool - whether writing (or reading).
+ * @buffer: The start of the buffer to write or fill.
+ * @buffer_size: The size of the buffer to write or fill.
+ * @no_readahead: Don't try to start readhead (when getting extents).
+ **/
+static int toi_rw_buffer(int writing, char *buffer, int buffer_size,
+ int no_readahead)
+{
+ int bytes_left = buffer_size, result = 0;
+
+ while (bytes_left) {
+ char *source_start = buffer + buffer_size - bytes_left;
+ char *dest_start = toi_writer_buffer + toi_writer_buffer_posn;
+ int capacity = PAGE_SIZE - toi_writer_buffer_posn;
+ char *to = writing ? dest_start : source_start;
+ char *from = writing ? source_start : dest_start;
+
+ if (bytes_left <= capacity) {
+ memcpy(to, from, bytes_left);
+ toi_writer_buffer_posn += bytes_left;
+ return 0;
+ }
+
+ /* Complete this page and start a new one */
+ memcpy(to, from, capacity);
+ bytes_left -= capacity;
+
+ if (!writing) {
+ /*
+ * Perform actual I/O:
+ * read readahead_list_head into toi_writer_buffer
+ */
+ int result = toi_bio_get_next_page_read(no_readahead);
+ if (result)
+ return result;
+ } else {
+ toi_bio_queue_write(&toi_writer_buffer);
+ result = toi_bio_get_new_page(&toi_writer_buffer);
+ if (result)
+ return result;
+ }
+
+ toi_writer_buffer_posn = 0;
+ toi_cond_pause(0, NULL);
+ }
+
+ return 0;
+}
+
+/**
+ * toi_bio_read_page - read a page of the image
+ * @pfn: The pfn where the data belongs.
+ * @buffer_page: The page containing the (possibly compressed) data.
+ * @buf_size: The number of bytes on @buffer_page used (PAGE_SIZE).
+ *
+ * Read a (possibly compressed) page from the image, into buffer_page,
+ * returning its pfn and the buffer size.
+ **/
+static int toi_bio_read_page(unsigned long *pfn, struct page *buffer_page,
+ unsigned int *buf_size)
+{
+ int result = 0;
+ char *buffer_virt = kmap(buffer_page);
+
+ /*
+ * Only call start_new_readahead if we don't have a dedicated thread
+ * and we're the queue flusher.
+ */
+ if (current == toi_queue_flusher) {
+ int result2 = toi_start_new_readahead(0);
+ if (result2) {
+ printk(KERN_DEBUG "Queue flusher and "
+ "toi_start_one_readahead returned non-zero.\n");
+ result = -EIO;
+ goto out;
+ }
+ }
+
+ my_mutex_lock(0, &toi_bio_mutex);
+
+ /*
+ * Structure in the image:
+ * [destination pfn|page size|page data]
+ * buf_size is PAGE_SIZE
+ */
+ if (toi_rw_buffer(READ, (char *) pfn, sizeof(unsigned long), 0) ||
+ toi_rw_buffer(READ, (char *) buf_size, sizeof(int), 0) ||
+ toi_rw_buffer(READ, buffer_virt, *buf_size, 0)) {
+ abort_hibernate(TOI_FAILED_IO, "Read of data failed.");
+ result = 1;
+ }
+
+ my_mutex_unlock(0, &toi_bio_mutex);
+out:
+ kunmap(buffer_page);
+ return result;
+}
+
+/**
+ * toi_bio_write_page - write a page of the image
+ * @pfn: The pfn where the data belongs.
+ * @buffer_page: The page containing the (possibly compressed) data.
+ * @buf_size: The number of bytes on @buffer_page used.
+ *
+ * Write a (possibly compressed) page to the image from the buffer, together
+ * with it's index and buffer size.
+ **/
+static int toi_bio_write_page(unsigned long pfn, struct page *buffer_page,
+ unsigned int buf_size)
+{
+ char *buffer_virt;
+ int result = 0, result2 = 0;
+
+ if (unlikely(test_action_state(TOI_TEST_FILTER_SPEED)))
+ return 0;
+
+ my_mutex_lock(1, &toi_bio_mutex);
+
+ if (test_result_state(TOI_ABORTED)) {
+ my_mutex_unlock(1, &toi_bio_mutex);
+ return -EIO;
+ }
+
+ buffer_virt = kmap(buffer_page);
+
+ /*
+ * Structure in the image:
+ * [destination pfn|page size|page data]
+ * buf_size is PAGE_SIZE
+ */
+ if (toi_rw_buffer(WRITE, (char *) &pfn, sizeof(unsigned long), 0) ||
+ toi_rw_buffer(WRITE, (char *) &buf_size, sizeof(int), 0) ||
+ toi_rw_buffer(WRITE, buffer_virt, buf_size, 0)) {
+ printk(KERN_DEBUG "toi_rw_buffer returned non-zero to "
+ "toi_bio_write_page.\n");
+ result = -EIO;
+ }
+
+ kunmap(buffer_page);
+ my_mutex_unlock(1, &toi_bio_mutex);
+
+ if (current == toi_queue_flusher)
+ result2 = toi_bio_queue_flush_pages(0);
+
+ return result ? result : result2;
+}
+
+/**
+ * _toi_rw_header_chunk - read or write a portion of the image header
+ * @writing: Whether reading or writing.
+ * @owner: The module for which we're writing.
+ * Used for confirming that modules
+ * don't use more header space than they asked for.
+ * @buffer: Address of the data to write.
+ * @buffer_size: Size of the data buffer.
+ * @no_readahead: Don't try to start readhead (when getting extents).
+ *
+ * Perform PAGE_SIZE I/O. Start readahead if needed.
+ **/
+static int _toi_rw_header_chunk(int writing, struct toi_module_ops *owner,
+ char *buffer, int buffer_size, int no_readahead)
+{
+ int result = 0;
+
+ if (owner) {
+ owner->header_used += buffer_size;
+ toi_message(TOI_HEADER, TOI_LOW, 1,
+ "Header: %s : %d bytes (%d/%d).\n",
+ owner->name,
+ buffer_size, owner->header_used,
+ owner->header_requested);
+ if (owner->header_used > owner->header_requested) {
+ printk(KERN_EMERG "TuxOnIce module %s is using more "
+ "header space (%u) than it requested (%u).\n",
+ owner->name,
+ owner->header_used,
+ owner->header_requested);
+ return buffer_size;
+ }
+ } else {
+ unowned += buffer_size;
+ toi_message(TOI_HEADER, TOI_LOW, 1,
+ "Header: (No owner): %d bytes (%d total so far)\n",
+ buffer_size, unowned);
+ }
+
+ if (!writing && !no_readahead)
+ result = toi_start_new_readahead(0);
+
+ if (!result)
+ result = toi_rw_buffer(writing, buffer, buffer_size,
+ no_readahead);
+
+ total_header_bytes += buffer_size;
+ return result;
+}
+
+static int toi_rw_header_chunk(int writing, struct toi_module_ops *owner,
+ char *buffer, int size)
+{
+ return _toi_rw_header_chunk(writing, owner, buffer, size, 0);
+}
+
+static int toi_rw_header_chunk_noreadahead(int writing,
+ struct toi_module_ops *owner, char *buffer, int size)
+{
+ return _toi_rw_header_chunk(writing, owner, buffer, size, 1);
+}
+
+/**
+ * write_header_chunk_finish - flush any buffered header data
+ **/
+static int write_header_chunk_finish(void)
+{
+ int result = 0;
+
+ if (toi_writer_buffer_posn)
+ toi_bio_queue_write(&toi_writer_buffer);
+
+ result = toi_finish_all_io();
+
+ unowned = 0;
+ total_header_bytes = 0;
+ return result;
+}
+
+/**
+ * toi_bio_storage_needed - get the amount of storage needed for my fns
+ **/
+static int toi_bio_storage_needed(void)
+{
+ return sizeof(int);
+}
+
+/**
+ * toi_bio_save_config_info - save block I/O config to image header
+ * @buf: PAGE_SIZE'd buffer into which data should be saved.
+ **/
+static int toi_bio_save_config_info(char *buf)
+{
+ int *ints = (int *) buf;
+ ints[0] = target_outstanding_io;
+ return sizeof(int);
+}
+
+/**
+ * toi_bio_load_config_info - restore block I/O config
+ * @buf: Data to be reloaded.
+ * @size: Size of the buffer saved.
+ **/
+static void toi_bio_load_config_info(char *buf, int size)
+{
+ int *ints = (int *) buf;
+ target_outstanding_io = ints[0];
+}
+
+/**
+ * toi_bio_initialise - initialise bio code at start of some action
+ * @starting_cycle: Whether starting a hibernation cycle, or just reading or
+ * writing a sysfs value.
+ **/
+static int toi_bio_initialise(int starting_cycle)
+{
+ if (starting_cycle) {
+ max_outstanding_writes = 0;
+ max_outstanding_reads = 0;
+ toi_queue_flusher = current;
+#ifdef MEASURE_MUTEX_CONTENTION
+ {
+ int i, j, k;
+
+ for (i = 0; i < 2; i++)
+ for (j = 0; j < 2; j++)
+ for_each_online_cpu(k)
+ mutex_times[i][j][k] = 0;
+ }
+#endif
+ }
+
+ return 0;
+}
+
+/**
+ * toi_bio_cleanup - cleanup after some action
+ * @finishing_cycle: Whether completing a cycle.
+ **/
+static void toi_bio_cleanup(int finishing_cycle)
+{
+ if (toi_writer_buffer) {
+ toi_free_page(11, (unsigned long) toi_writer_buffer);
+ toi_writer_buffer = NULL;
+ }
+}
+
+struct toi_bio_ops toi_bio_ops = {
+ .bdev_page_io = toi_bdev_page_io,
+ .finish_all_io = toi_finish_all_io,
+ .update_throughput_throttle = update_throughput_throttle,
+ .forward_one_page = go_next_page,
+ .set_extra_page_forward = set_extra_page_forward,
+ .set_devinfo = toi_set_devinfo,
+ .read_page = toi_bio_read_page,
+ .write_page = toi_bio_write_page,
+ .rw_init = toi_rw_init,
+ .rw_cleanup = toi_rw_cleanup,
+ .read_header_init = toi_read_header_init,
+ .rw_header_chunk = toi_rw_header_chunk,
+ .rw_header_chunk_noreadahead = toi_rw_header_chunk_noreadahead,
+ .write_header_chunk_finish = write_header_chunk_finish,
+ .io_flusher = bio_io_flusher,
+};
+
+static struct toi_sysfs_data sysfs_params[] = {
+ SYSFS_INT("target_outstanding_io", SYSFS_RW, &target_outstanding_io,
+ 0, 16384, 0, NULL),
+};
+
+static struct toi_module_ops toi_blockwriter_ops = {
+ .name = "lowlevel i/o",
+ .type = MISC_HIDDEN_MODULE,
+ .directory = "block_io",
+ .module = THIS_MODULE,
+ .print_debug_info = toi_bio_print_debug_stats,
+ .memory_needed = toi_bio_memory_needed,
+ .storage_needed = toi_bio_storage_needed,
+ .save_config_info = toi_bio_save_config_info,
+ .load_config_info = toi_bio_load_config_info,
+ .initialise = toi_bio_initialise,
+ .cleanup = toi_bio_cleanup,
+
+ .sysfs_data = sysfs_params,
+ .num_sysfs_entries = sizeof(sysfs_params) /
+ sizeof(struct toi_sysfs_data),
+};
+
+/**
+ * toi_block_io_load - load time routine for block I/O module
+ *
+ * Register block i/o ops and sysfs entries.
+ **/
+static __init int toi_block_io_load(void)
+{
+ return toi_register_module(&toi_blockwriter_ops);
+}
+
+late_initcall(toi_block_io_load);
diff --git a/kernel/power/tuxonice_block_io.h b/kernel/power/tuxonice_block_io.h
new file mode 100644
index 0000000..b18298c
--- /dev/null
+++ b/kernel/power/tuxonice_block_io.h
@@ -0,0 +1,59 @@
+/*
+ * kernel/power/tuxonice_block_io.h
+ *
+ * Copyright (C) 2004-2008 Nigel Cunningham (nigel at tuxonice net)
+ * Copyright (C) 2006 Red Hat, inc.
+ *
+ * Distributed under GPLv2.
+ *
+ * This file contains declarations for functions exported from
+ * tuxonice_block_io.c, which contains low level io functions.
+ */
+
+#include <linux/buffer_head.h>
+#include "tuxonice_extent.h"
+
+struct toi_bdev_info {
+ struct block_device *bdev;
+ dev_t dev_t;
+ int bmap_shift;
+ int blocks_per_page;
+ int ignored;
+};
+
+/*
+ * Our exported interface so the swapwriter and filewriter don't
+ * need these functions duplicated.
+ */
+struct toi_bio_ops {
+ int (*bdev_page_io) (int rw, struct block_device *bdev, long pos,
+ struct page *page);
+ void (*check_io_stats) (void);
+ void (*reset_io_stats) (void);
+ void (*update_throughput_throttle) (int jif_index);
+ int (*finish_all_io) (void);
+ int (*forward_one_page) (int writing, int section_barrier);
+ void (*set_extra_page_forward) (void);
+ void (*set_devinfo) (struct toi_bdev_info *info);
+ int (*read_page) (unsigned long *index, struct page *buffer_page,
+ unsigned int *buf_size);
+ int (*write_page) (unsigned long index, struct page *buffer_page,
+ unsigned int buf_size);
+ void (*read_header_init) (void);
+ int (*rw_header_chunk) (int rw, struct toi_module_ops *owner,
+ char *buffer, int buffer_size);
+ int (*rw_header_chunk_noreadahead) (int rw,
+ struct toi_module_ops *owner,
+ char *buffer, int buffer_size);
+ int (*write_header_chunk_finish) (void);
+ int (*rw_init) (int rw, int stream_number);
+ int (*rw_cleanup) (int rw);
+ int (*io_flusher) (int rw);
+};
+
+extern struct toi_bio_ops toi_bio_ops;
+
+extern char *toi_writer_buffer;
+extern int toi_writer_buffer_posn;
+extern struct hibernate_extent_iterate_saved_state toi_writer_posn_save[4];
+extern struct toi_extent_iterate_state toi_writer_posn;
--
1.5.6.3
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
