On Saturday 18 April 2009, Rafael J. Wysocki wrote: > On Saturday 18 April 2009, Russell King wrote: > > On Sat, Apr 18, 2009 at 03:23:35PM +0200, Rafael J. Wysocki wrote: > > > The patchset in question had been discussed quite extensively before it was > > > merged and it's a pity none of the people caring for the affected platforms > > > took part in those discussions. That would allow us to avoid the breakage. > > > > Maybe on some list, but not everyone is subscribed to a million and one > > mailing lists. I don't have enough time to read those which I'm currently > > subscribed to, so I definitely don't want any more. > > > > > > or provide alternative equivalent functionality where the platform code is > > > > notified of the PM event prior to the late suspend callback being issued. > > > > > > There is the .begin() callback that could be used, but if you need the > > > platform to be notified _just_ prior to the late suspend callback, then the > > > only thing I can think of at the moment is the appended patch. > > > > > > It shouldn't break anything in theory, because the majority of drivers put > > > their devices into low power states in the "regular" suspend callbacks anyway. > > > > Okay, my requirement is: > > > > What I need to be able to do is to suspend most devices on the host side > > which may involve talking to a separate microcontroller via I2C to shut > > down power to peripherals. > > > > Once that's complete, I then need to inform this microcontroller via I2C > > that we're going to be entering suspend mode, and wait for it to acknowledge > > that (after it's done its own suspend preparations). At that point I can > > shutdown the I2C controller, and enter suspend mode. > > Would it be an option to use a sysdev for that? > > > Upon resume (which is activated by this microcontroller, including jtagging > > the boot code across to the host CPU), we need to tell this microcontroller > > that we're going back to 'run' mode again via I2C, and then resume the > > devices. > > > > This is why we hooked the PXA I2C driver into the late suspend and > > early resume methods, so the I2C driver would be the last to suspend and > > the first to resume, thus allowing it to be used to talk to this micro- > > controller when required. This worked out nicely because the late suspend > > used to before the platform prepare and platform finish used to happen > > after the early resume methods were called. > > Unfortunately I'm not familiar with I2C, so I'm not sure whether or not this > would work, but it looks like sysdev could be used instead of platform_driver > for i2c_pxa_driver. > > If using sysdev here (and analogously in i2c-s3c2410.c) is an option, I'd > prefer to do that instead of reordering suspend and resume code once again. Well, that wouldn't be straightforward, so I think I'll push my patch for 2.6.30 if Len doesn't object to it. Thanks, Rafael _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
