From: Rafael J. Wysocki <rjw@xxxxxxx>
Impact: Fix
Prevent e1000 from putting the adapter into D3 during shutdown
except when we're going to power off the system, since doing that may
generally cause problems with kexec to happen (such problems were
observed for igb and forcedeth). For this purpose seperate
e1000_shutdown() from e1000_suspend() and use the appropriate PCI
PM callbacks in both of them.
Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
---
drivers/net/e1000/e1000_main.c | 44 +++++++++++++++++++++++++++++------------
1 file changed, 32 insertions(+), 12 deletions(-)
Index: linux-2.6/drivers/net/e1000/e1000_main.c
===================================================================
--- linux-2.6.orig/drivers/net/e1000/e1000_main.c
+++ linux-2.6/drivers/net/e1000/e1000_main.c
@@ -4583,7 +4583,7 @@ int e1000_set_spd_dplx(struct e1000_adap
return 0;
}
-static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake)
{
struct net_device *netdev = pci_get_drvdata(pdev);
struct e1000_adapter *adapter = netdev_priv(netdev);
@@ -4646,22 +4646,18 @@ static int e1000_suspend(struct pci_dev
ew32(WUC, E1000_WUC_PME_EN);
ew32(WUFC, wufc);
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
} else {
ew32(WUC, 0);
ew32(WUFC, 0);
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_enable_wake(pdev, PCI_D3cold, 0);
}
+ *enable_wake = !!wufc;
+
e1000_release_manageability(adapter);
/* make sure adapter isn't asleep if manageability is enabled */
- if (adapter->en_mng_pt) {
- pci_enable_wake(pdev, PCI_D3hot, 1);
- pci_enable_wake(pdev, PCI_D3cold, 1);
- }
+ if (adapter->en_mng_pt)
+ *enable_wake = true;
if (hw->phy_type == e1000_phy_igp_3)
e1000_phy_powerdown_workaround(hw);
@@ -4675,12 +4671,29 @@ static int e1000_suspend(struct pci_dev
pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
-
return 0;
}
#ifdef CONFIG_PM
+static int e1000_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ int retval;
+ bool wake;
+
+ retval = __e1000_shutdown(pdev, &wake);
+ if (retval)
+ return retval;
+
+ if (wake) {
+ pci_prepare_to_sleep(pdev);
+ } else {
+ pci_wake_from_d3(pdev, false);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
+
+ return 0;
+}
+
static int e1000_resume(struct pci_dev *pdev)
{
struct net_device *netdev = pci_get_drvdata(pdev);
@@ -4735,7 +4748,14 @@ static int e1000_resume(struct pci_dev *
static void e1000_shutdown(struct pci_dev *pdev)
{
- e1000_suspend(pdev, PMSG_SUSPEND);
+ bool wake;
+
+ __e1000_shutdown(pdev, &wake);
+
+ if (system_state == SYSTEM_POWER_OFF) {
+ pci_wake_from_d3(pdev, wake);
+ pci_set_power_state(pdev, PCI_D3hot);
+ }
}
#ifdef CONFIG_NET_POLL_CONTROLLER
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
