rc2 and now rc3
Orinoco driver uses notifications to request firmware before
suspend/hibernation. This is OK for suspend, but does not seem to work
for hibernation. I get what suspiciously looks like 60 seconds timeout
for request_firmware, but I do not see either usual request_firmware
output, nor debug output.
Suspend is OK.
orinoco notification handlers is:
static int orinoco_pm_notifier(struct notifier_block *notifier,
unsigned long pm_event,
void *unused)
{
struct orinoco_private *priv = container_of(notifier,
struct
orinoco_private,
pm_notifier);
/* All we need to do is cache the firmware before suspend, and
* release it when we come out.
*
* Only need to do this if we're downloading firmware. */
if (!priv->do_fw_download)
return NOTIFY_DONE;
switch (pm_event) {
case PM_HIBERNATION_PREPARE:
case PM_SUSPEND_PREPARE:
printk("%s: called with %ld before\n", __FUNCTION__,
pm_event);
orinoco_cache_fw(priv, 0);
break;
case PM_POST_RESTORE:
/* Restore from hibernation failed. We need to clean
* up in exactly the same way, so fall through. */
case PM_POST_HIBERNATION:
case PM_POST_SUSPEND:
printk("%s: called with %ld after\n", __FUNCTION__,
pm_event);
orinoco_uncache_fw(priv);
break;
case PM_RESTORE_PREPARE:
default:
break;
}
I get
[ 1975.505283] orinoco_pm_notifier: called with 3 before
for suspend. Nothing for hibernate. Hibernation log:
[11892.927098] Syncing filesystems ... done.
[11892.944480] Freezing user space processes ... (elapsed 0.00 seconds)
done.
[11892.951447] Freezing remaining freezable tasks ... (elapsed 0.00
seconds) don
e.
[11892.956299] PM: Shrinking memory... done (30918 pages freed)
[11894.679916] PM: Freed 123672 kbytes in 1.72 seconds (71.90 MB/s)
[11894.679928] Suspending console(s) (use no_console_suspend to debug)
[11894.685232] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[11894.688489] e100 0000:00:0a.0: PME# enabled
[11894.688977] e100 0000:00:0a.0: wake-up capability enabled by ACPI
[11894.742522] ALI 5451 0000:00:06.0: PCI INT A disabled
[11894.755858] ALI 5451 0000:00:06.0: power state changed by ACPI to D3
[11895.515754] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[11895.515789] ohci_hcd 0000:00:02.0: PCI INT A disabled
[11895.515859] ohci_hcd 0000:00:02.0: PME# disabled
[11895.518458] ACPI: Preparing to enter system sleep state S4
[11895.519666] PM: Saving platform NVS memory
[11895.520121] PM: Creating hibernation image:
[11895.522219] PM: Need to copy 60887 pages
[11895.522219] PM: Restoring platform NVS memory
[11895.522219] ohci_hcd 0000:00:02.0: restoring config space at offset
0x1 (was0x2900007, writing 0x2900003)
[11895.522219] pata_ali 0000:00:04.0: restoring config space at offset
0x1 (was0x2900001, writing 0x2900005)
[11895.522219] ALI 5451 0000:00:06.0: restoring config space at offset
0x1 (was0xc2900007, writing 0xc2900003)
[11895.522219] e100 0000:00:0a.0: restoring config space at offset 0xf
(was 0x380801ff, writing 0x3808010b)
[11895.522219] e100 0000:00:0a.0: restoring config space at offset 0x6
(was 0x48100000, writing 0xf7d00000)
[11895.522219] e100 0000:00:0a.0: restoring config space at offset 0x5
(was 0x2801, writing 0xeb41)
[11895.522219] e100 0000:00:0a.0: restoring config space at offset 0x4
(was 0x48200000, writing 0xf7efd000)
[11895.522219] e100 0000:00:0a.0: restoring config space at offset 0x1
(was 0x2900003, writing 0x2900007)
[11895.522219] yenta_cardbus 0000:00:10.0: restoring config space at
offset 0xf
(was 0x34001ff, writing 0x5c001ff)
[11895.522219] yenta_cardbus 0000:00:10.0: restoring config space at
offset 0x4(was 0x48201000, writing 0x48100000)
[11895.522219] yenta_cardbus 0000:00:10.0: restoring config space at
offset 0x3(was 0x24008, writing 0x2a808)
[11895.522219] yenta_cardbus 0000:00:10.0: restoring config space at
offset 0x1(was 0x2100003, writing 0x2100007)
[11895.522219] yenta_cardbus 0000:00:11.0: restoring config space at
offset 0xf(was 0x10001ff, writing 0x58001ff)
[11895.522219] yenta_cardbus 0000:00:11.0: restoring config space at
offset 0x4(was 0x48202000, writing 0x48101000)
[11895.522219] yenta_cardbus 0000:00:11.0: restoring config space at
offset 0x3(was 0x824000, writing 0x82a800)
[11895.522219] yenta_cardbus 0000:00:11.0: restoring config space at
offset 0x1(was 0x4900003, writing 0x4900007)
[11895.522219] yenta_cardbus 0000:00:11.1: restoring config space at
offset 0xf(was 0x10002ff, writing 0x58002ff)
[11895.522219] yenta_cardbus 0000:00:11.1: restoring config space at
offset 0x4(was 0x48203000, writing 0x48102000)
[11895.522219] yenta_cardbus 0000:00:11.1: restoring config space at
offset 0x3(was 0x824000, writing 0x82a800)
[11895.522219] yenta_cardbus 0000:00:11.1: restoring config space at
offset 0x1(was 0x4900003, writing 0x4900007)
[11895.538101] ACPI: Waking up from system sleep state S4
[11895.551467] agpgart-ali 0000:00:00.0: PME# disabled
[11895.551509] pci 0000:00:01.0: setting latency timer to 64
[11895.551534] ohci_hcd 0000:00:02.0: PME# disabled
[11895.551565] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LNKG] -> GSI 11
(level,low) -> IRQ 11
[11895.551586] ohci_hcd 0000:00:02.0: PME# disabled
[11895.604269] usb usb1: root hub lost power or was reset
[11895.604359] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
[11896.904448] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[11896.904645] ALI 5451 0000:00:06.0: power state changed by ACPI to D0
[11896.904671] ALI 5451 0000:00:06.0: PCI INT A -> Link[LNKH] -> GSI 11
(level,low) -> IRQ 11
[11897.065970] ata1.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out
[11897.065980] ata1.00: ACPI cmd ef/03:44:00:00:00:00 filtered out
[11897.079453] ata1.00: configured for UDMA/33
[11897.079712] sd 0:0:0:0: [sda] 39070080 512-byte hardware sectors:
(20.0 GB/18.6 GiB)
[11897.079799] sd 0:0:0:0: [sda] Write Protect is off
[11897.079807] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[11897.079939] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[11897.185571] pci 0000:00:07.0: PME# disabled
[11897.185593] ali1535_smbus 0000:00:08.0: enabling device (0000 ->
0001)
[11897.185631] e100 0000:00:0a.0: restoring config space at offset 0xf
(was 0x38080100, writing 0x3808010b)
[11897.185663] e100 0000:00:0a.0: restoring config space at offset 0x6
(was 0x0, writing 0xf7d00000)
[11897.185676] e100 0000:00:0a.0: restoring config space at offset 0x5
(was 0x1, writing 0xeb41)
[11897.185689] e100 0000:00:0a.0: restoring config space at offset 0x4
(was 0x0, writing 0xf7efd000)
[11897.185702] e100 0000:00:0a.0: restoring config space at offset 0x3
(was 0x0, writing 0x4008)
[11897.185718] e100 0000:00:0a.0: restoring config space at offset 0x1
(was 0x2900000, writing 0x2900007)
[11897.185744] e100 0000:00:0a.0: wake-up capability disabled by ACPI
[11897.185755] e100 0000:00:0a.0: PME# disabled
[11897.352579] ata2.00: ACPI cmd ef/03:0c:00:00:00:00 filtered out
[11897.352588] ata2.00: ACPI cmd ef/03:42:00:00:00:00 filtered out
[11897.376011] ata2.00: configured for UDMA/33
[11898.168922] pci 0000:00:12.0: PME# disabled
[11898.168943] pci 0000:01:00.0: PME# disabled
[11898.172324] sd 0:0:0:0: [sda] Starting disk
[11898.409627] hermes_init: iobase = 00010100, spacing = 0
[11898.449169] eth1: Attempting to download firmware agere_sta_fw.bin
[11898.449211] hermes_dld: AUX enable returned 0
[11898.450234] hermes_dld: AUX disable returned 0
[11898.450240] hermes_dld: Actual PDA length 998, Max allowed 1000
[11898.450247] eth1: Read PDA returned 0
[11898.450255] orinoco_cs 0.0: firmware: requesting agere_sta_fw.bin
[11958.449070] eth1: Cannot find firmware agere_sta_fw.bin
[11958.449086] eth1: Error -2 re-initializing firmware
[11958.449098] PM: Device 0.0 failed to restore: error -5
[11958.535206] Restarting tasks ... <5>toshiba_acpi: Re-enabled hotkeys
[11958.630180] done.
Attachment:
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
