Re: [PATCH 1/3] PCI: Rework default handling of suspend and resume

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Alan,

On Saturday, 6 of December 2008, Alan Stern wrote:
> On Sat, 6 Dec 2008, Rafael J. Wysocki wrote:
> 
> > On Saturday, 6 of December 2008, Linus Torvalds wrote:
> > > 
> > > On Sat, 6 Dec 2008, Rafael J. Wysocki wrote:
> > > > 
> > > > USB doesn't use that for PCI suspend-resume, it uses it for suspend-resume of
> > > > USB devices behind the controller.
> > > 
> > > Oh, in that case there are no PCI users of this at all, and what the PCI 
> > > driver does is immaterial ;)
> > > 
> > > > But then we will save the device's registers in the "sleeping" state. 
> > > 
> > > No no. The rule would be that a PCI driver - if it uses the new 
> > > infrastructure, which apparently nobody does _as_ a PCI driver - simply 
> > > would never do the whole "pci_set_power_state(PCI_D3hot)" etc crud AT ALL.
> > 
> > Now _that_ sounds good. :-)
> > 
> > > So a PCI driver would only do higher-level stuff in its suspend/resume 
> > > code. For example, a USB host controller would initiate the USB bus level 
> > > stuff, and likely just stop the controller (not suspend it - just stop 
> > > it).
> > 
> > I like this idea very much.
> 
> Rafael, I'd be happy to help with fixing up the USB PCI PM code.  At
> this point I'm not sure exactly what's needed, though.  For instance,
> is there any compelling reason to switch over to the new dev_pm_ops
> approach?

Certainly not at the moment.  There will be a reason some time after .29.

That said, it apparently is possible to clean up the resume callbacks of PCI
USB controllers, as mentioned here: http://lkml.org/lkml/2008/12/6/38

> And what should the correct sequence of calls be?

Well, that's something I'm not exactly sure about myself.  Surely it seems
reasonable to call pci_restore_state() with interrupts disabled and do the rest
of resume after that.  Also, I think that the core could execute things like
pci_enable_device() during resume and pci_set_power_state()/pci_enable_wake()
on suspend so that the drivers didn't have to.  This way we could reduce code
duplication quite a bit.

However, I'm not quite sure about the freeing and requesting IRQs during
suspend and resume.  Many drivers do that, many others don't.  Still,
apparently some drivers don't work correctly after resume if this is not done.
So, if that should generally be done, I also think that moving it to the core
might be a good idea.

Thanks,
Rafael
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux