Hi! > I've just finished compiling a recent snapshot of rc3 (namely gfed4d59 > [1]) on a F9 distro (gcc 4.3.0 20080428) and suspend to disk doesn't > work anymore. My config is attached below [2]. > > It just freezes my laptop (an old Thinkpad T30) while it works with > kernel version 2.6.26 (I've never tried 2.6.27). > > I've tried playing with the pm_test facility, and while the "freezer" > test works, the "devices" test fails like the real suspend... > > When that happens, the console still works (ie I can switch VTs and > type) but the whole system doesn't respond: I can't login for example... > Guess the disk driver is already off at that point. > > I don't have another computer to capture a serial trace so I guess I'm > going to try to bisect it (which is going to take while on this slow > computer). If I reconfigure my syslog could I get the output of the > suspend process on the screen (for some reason I used to get it during > suspend but now I only get it during resume)? > > Any ideas or pointers to fix this appreciated... Trying with minimum drivers is likely to help here, and should be easier than bisect. Boot with init=/bin/bash, then try "devices" > pm_dest and disk > state... -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
