Re: I need some serious help to debug suspend to ram problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rafael J. Wysocki wrote:
> On Saturday, 27 of September 2008, Maxim Levitsky wrote:
>> Rafael J. Wysocki wrote:
>>> On Monday, 22 of September 2008, Maxim Levitsky wrote:
>>>> Rafael J. Wysocki wrote:
>>>>> On Sunday, 21 of September 2008, Maxim Levitsky wrote:
>>>>>> Maxim Levitsky wrote:
>>>>>>> Rafael J. Wysocki wrote:
>>>>>>>> On Saturday, 20 of September 2008, Maxim Levitsky wrote:
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I hit a dead end when trying to understand why my notebook can't 
>>>>>>>>> resume from suspend to ram
>>>>>>>>> if this is done two times a row.
>>>>>>>>>
>>>>>>>>> Single suspend/resume cycle works almost perfectly (beep that goes 
>>>>>>>>> through the sound card is muted... no morse code for me... :-(
>>>>>>>>>
>>>>>>>>> )
>>>>>>>>>
>>>>>>>>> I compiled a minimal kernel (absolutely nothing but disk drivers, all 
>>>>>>>>> experimental option like nohz
>>>>>>>>> turned off)
>>>>>>>>>
>>>>>>>>> But I had to turn SMP, since without it system won't resume first 
>>>>>>>>> time I suspend it.
>>>>>>>>> (How could this affect suspend?)
>>>>>>>> It could if the system is 64-bit.  In which case please have a look at
>>>>>>>> http://bugzilla.kernel.org/show_bug.cgi?id=11237
>>>>>>>>
>>>>>>>>> With SMP and minimal kernel (of course  no closed drivers), I get 
>>>>>>>>> same behavior,
>>>>>>>>> first resume works second hangs.
>>>>>>>>>
>>>>>>>>> I then added some debug code to real mode wakeup code, I put there in 
>>>>>>>>> first
>>>>>>>>> place instructions, that will save some magic value to rtc (to alarm
>>>>>>>>> registers that I know are preserved during boot cycle), and I 
>>>>>>>>> discovered   sad thing that first time bios does pass control to 
>>>>>>>>> linux, but second time
>>>>>>>>> (when it hangs), it doesn't.
>>>>>>>>>
>>>>>>>>> I tried to update bios, and I got same results.
>>>>>>>>>
>>>>>>>>> Of course it does work with that @#$%^& OS
>>>>>>>> So we're doing something wrong.  Please try the appended patch.
>>>>>>> Thanks a lot, but this didn't help.
>>>>>>>
>>>>>>> It still has same pattern, first suspend/resume works perfectly, second 
>>>>>>> suspend/resume hangs hard.
>>>>>>> It always happens like this, first resume always work (unless I turn off 
>>>>>>> smp in kernel (I test this again), or reserve all low memory)
>>>>>>>
>>>>>>> Also note that if I suspend the system to ram, resume, and then suspend 
>>>>>>> to disk, then I can suspend to ram and resume, it seems that
>>>>>>>
>>>>>>> on suspend to ram cycle somehow arms BIOS or something else, so second 
>>>>>>> resume in a row doesn't work.
>>>>>>>
>>>>>>> I run 32 bit kernel here, this is a long story (this bios doesn't turn 
>>>>>>> fan on when running 64-bit version, I could update it, and I know that 
>>>>>>> fan issue is fixed there, but new bios introduces bigger bug, namely it 
>>>>>>> makes fan to run almost always regardless of 32/64 type of os.
>>>>>>> And it doesn't fix this suspend/resume issue, I tested this. I could 
>>>>>>> start/stop fan manually with a script, but this could fail, and maybe I 
>>>>>>> will do so someday.)
>>>>>>>
>>>>>>> The bugzilla seems to be unrelated here, since bios does pass control 
>>>>>>> there, but corrupts memory.
>>>>>>> Here I also have seen that bios corrupts memory, but everything resumes 
>>>>>>> fine first time, and on second time,
>>>>>>> bios doesn't pass control (I put set of instructions in beginning of 
>>>>>>> wakeup real mode assembly file, no page tables, GDT/LDT are used there)
>>>>>> I did same test for kernel without SMP, yes it hangs on first resume, but bios
>>>>>> does pass control to linux, so while this is a minor bug, it is unrelated.
>>>>> Still, I'd be interested in debugging this one too, if possible.  That may be
>>>>> easier too. ;-)
>>>> I take a look at that.
>>>>
>>>>>> I also tested noapic, pci=nommconf. No luck.
>>>>>>
>>>>>> Pattern is always the same, first resume works always, second doesn't.
>>>>>> It is sad since first resume is almost perfect (when I have free time I need to look at sound codec datasheet
>>>>>> and fix few issues there, anyways here alsa has few issues, all this is trivial, I already fixed all issues with desktop
>>>>>> which has a sigmatel codec)
>>>>> If you have more than 2 GB of RAM, you can try iommu=soft .
>>>>>
>>>>> I guess that all of the /sys/power/pm_test tests are passed?
>>>> Well, I didn't run /sys/power/pm_test. 
>>>> But this system has rock solid suspend to disk, I use it always.
>>> Please look at http://bugzilla.kernel.org/show_bug.cgi?id=11415 .
>> Hi,
>>
>>
>> I took a look there, but it doesn't seem to be similar to my issue,
>> my issue is much bigger :-(
>>
>> They tell that 2.6.24 works, but here nothing works, I was never able to do
>> two suspends in row.
>>
>> What I did find interesting was that they mention hardware locks of several kind there, so I am thinking
>> could that be related to EC code, could it be that EC code confuses it somehow, so next boot doesn't work?
>> Some hardware lock that kernel forgets to unlock, and that prevents bios from resume
>>
>> Here ec switches to polled mode almost instantly, due to that bogus 'interrupt storm', I tried to increase interrupt threshold,
>> and no more polled mode, but nether working second resume :-(
> 
> Have you tried the patch from http://bugzilla.kernel.org/show_bug.cgi?id=10724#c142 ?
> 

No, but just did,
EC storm issue is gone, but thats all that is gone, still same hang after second resume

No ec storm message after first resume ether,  now no error messages at all in dmesg....

Best regards,
	Maxim Levitsky
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux