On Friday, 6 of June 2008, Pavel Machek wrote:
> Hi!
>
> > > > > Can you try this one? It should prevent suspend in the broken cases,
> > > > > but allow it in mem=4G config.
> > > >
> > > > Sure!
> > > >
> > > > root@babar:/usr/src/linux-2.6.25# patch -p1 < /home/pat/patch-2.6.26-rc3.gart-suspend
> > > > patching file arch/x86/kernel/pci-gart_64.c
> > > > Hunk #4 succeeded at 629 with fuzz 2 (offset 11 lines).
> > > >
> > > > .....make; cp bzImage /boot; reboot....
> > >
> > > Thanks!
> > >
> > > This goes on top of the second patch... it makes it work.
> > >
> > > Pavel
> > >
> > > For iommu suspend/resume code to work, functions it calls may not be
> > > __init.
> > >
> > > Signed-off-by: Pavel Machek <pavel@xxxxxxx>
> >
> > I consolidated some of your patches sent in this thread and made the result
> > apply to the current -git. It hasn't been tested yet, but does it look good?
> >
> > It's on top of the patch that adds the GART sysdev.
>
> Looks ok to me.
Still, it may be improved. :-)
First, we shouldn't mix the "early PCI config access" thing with the "normal"
method. Second, we don't have to check for the K8 north bridges on resume,
because we already know where they are in the configuration space and we can
use this information.
Updated patch follows. It has been tested a little on my new 4 GB test box on
which 2.6.26-rc4 failed miserably with severe consequences. More testing
welcome, but please be careful.
Thanks,
Rafael
---
Add resume handling to GART IOMMU.
Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
---
arch/x86/kernel/aperture_64.c | 2 +
arch/x86/kernel/pci-gart_64.c | 75 +++++++++++++++++++++++++++++++++---------
include/asm-x86/gart.h | 1
3 files changed, 62 insertions(+), 16 deletions(-)
Index: linux-2.6/arch/x86/kernel/pci-gart_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/pci-gart_64.c
+++ linux-2.6/arch/x86/kernel/pci-gart_64.c
@@ -549,14 +549,70 @@ static __init unsigned read_aperture(str
return aper_base;
}
+static void enable_gart_translations(void)
+{
+ int i;
+
+ for (i = 0; i < num_k8_northbridges; i++) {
+ struct pci_dev *dev;
+ u32 gatt_reg;
+ u32 ctl;
+
+ dev = k8_northbridges[i];
+ gatt_reg = __pa(agp_gatt_table) >> 12;
+ gatt_reg <<= 4;
+ pci_write_config_dword(dev, 0x98, gatt_reg);
+ pci_read_config_dword(dev, 0x90, &ctl);
+
+ ctl |= 1;
+ ctl &= ~((1<<4) | (1<<5));
+
+ pci_write_config_dword(dev, 0x90, ctl);
+ }
+}
+
+/*
+ * If fix_up_north_bridges is set, the north bridges have to be fixed up on
+ * resume in the same way as they are handled in gart_iommu_hole_init().
+ */
+static bool fix_up_north_bridges;
+static u32 aperture_order;
+static u32 aperture_alloc;
+
+void set_up_gart_resume(u32 aper_order, u32 aper_alloc)
+{
+ fix_up_north_bridges = true;
+ aperture_order = aper_order;
+ aperture_alloc = aper_alloc;
+}
+
static int gart_resume(struct sys_device *dev)
{
+ printk(KERN_INFO "PCI-DMA: Resuming GART IOMMU\n");
+
+ if (fix_up_north_bridges) {
+ int i;
+
+ for (i = 0; i < num_k8_northbridges; i++) {
+ struct pci_dev *dev = k8_northbridges[i];
+
+ /*
+ * Don't enable translations just yet. That is the next
+ * step. Restore the pre-suspend aperture settings.
+ */
+ pci_write_config_dword(dev, 0x90, aperture_order << 1);
+ pci_write_config_dword(dev, 0x94, aperture_alloc >> 25);
+ }
+ }
+
+ enable_gart_translations();
+
return 0;
}
static int gart_suspend(struct sys_device *dev, pm_message_t state)
{
- return -EINVAL;
+ return 0;
}
static struct sysdev_class gart_sysdev_class = {
@@ -614,27 +670,14 @@ static __init int init_k8_gatt(struct ag
memset(gatt, 0, gatt_size);
agp_gatt_table = gatt;
- for (i = 0; i < num_k8_northbridges; i++) {
- u32 gatt_reg;
- u32 ctl;
-
- dev = k8_northbridges[i];
- gatt_reg = __pa(gatt) >> 12;
- gatt_reg <<= 4;
- pci_write_config_dword(dev, 0x98, gatt_reg);
- pci_read_config_dword(dev, 0x90, &ctl);
-
- ctl |= 1;
- ctl &= ~((1<<4) | (1<<5));
-
- pci_write_config_dword(dev, 0x90, ctl);
- }
+ enable_gart_translations();
error = sysdev_class_register(&gart_sysdev_class);
if (!error)
error = sysdev_register(&device_gart);
if (error)
panic("Could not register gart_sysdev -- would corrupt data on next suspend");
+
flush_gart();
printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n",
Index: linux-2.6/arch/x86/kernel/aperture_64.c
===================================================================
--- linux-2.6.orig/arch/x86/kernel/aperture_64.c
+++ linux-2.6/arch/x86/kernel/aperture_64.c
@@ -413,4 +413,6 @@ void __init gart_iommu_hole_init(void)
write_pci_config(0, num, 3, 0x90, aper_order<<1);
write_pci_config(0, num, 3, 0x94, aper_alloc>>25);
}
+
+ set_up_gart_resume(aper_order, aper_alloc);
}
Index: linux-2.6/include/asm-x86/gart.h
===================================================================
--- linux-2.6.orig/include/asm-x86/gart.h
+++ linux-2.6/include/asm-x86/gart.h
@@ -11,6 +11,7 @@ extern void gart_iommu_shutdown(void);
extern void __init gart_parse_options(char *);
extern void early_gart_iommu_check(void);
extern void gart_iommu_hole_init(void);
+extern void set_up_gart_resume(u32, u32);
extern int fallback_aper_order;
extern int fallback_aper_force;
extern int gart_iommu_aperture;
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
