From: Tobias Diedrich <ranma+kernel@xxxxxxxxxxxx> This patch is the minimal amount of code needed to support wake-on-lan in platform mode properly (i.e. "ethtool -s eth0 wol g" is sufficient, no additional magic needed) for me. This is derived from David Brownells patch (http://lists.laptop.org/pipermail/devel/2007-April/004691.html). However I decided to move the hook into pci-acpi.c since the other two pci hooks also live there and pci and acpi are the only users of the platform_enable_wakeup-hook. As a 'side-effect' this also makes wake on usb activity work for me and I had to disable usb wakeup (which is enabled by default) using the power/wakeup sysfs functionality ("echo disabled > ${sysfs_path_to_device}/power/wakeup"). (BTW I first thought the 'immediate reboot because of usb wake' effect is caused by the optical mouse generating a wake event, but it rather seems to be a problem with a flaky secondary usb host controller, which sees a connected device where nothing is attached) Signed-off-by: Tobias Diedrich <ranma+kernel@xxxxxxxxxxxx> Index: linux-2.6.26-rc4.forcedwol/drivers/pci/pci-acpi.c =================================================================== --- linux-2.6.26-rc4.forcedwol.orig/drivers/pci/pci-acpi.c 2008-06-01 00:40:23.000000000 +0200 +++ linux-2.6.26-rc4.forcedwol/drivers/pci/pci-acpi.c 2008-06-01 00:46:55.000000000 +0200 @@ -315,6 +315,25 @@ } return PCI_POWER_ERROR; } + +static int acpi_platform_enable_wakeup(struct device *dev, int is_on) +{ + struct acpi_device *adev; + int status; + + if (!device_can_wakeup(dev)) + return -EINVAL; + + if (is_on && !device_may_wakeup(dev)) + return -EINVAL; + + status = acpi_bus_get_device(DEVICE_ACPI_HANDLE(dev), &adev); + if (status < 0) + return status; + + adev->wakeup.state.enabled = !!is_on; + return 0; +} #endif static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state) @@ -399,6 +418,7 @@ return 0; #ifdef CONFIG_ACPI_SLEEP platform_pci_choose_state = acpi_pci_choose_state; + platform_enable_wakeup = acpi_platform_enable_wakeup; #endif platform_pci_set_power_state = acpi_pci_set_power_state; return 0; _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
