From: Rafael J. Wysocki <rjw@xxxxxxx>
There are some systems out there that don't work correctly with
our current suspend/hibernation code ordering. Provide a workaround
for these systems allowing them to pass the
'acpi_old_suspend_ordering' command line parameter to the kernel that
will make it use the pre-ACPI 2.0 suspend code ordering.
Unfortunately, that requires us to add a platform hook to the
resuming of devices for recovering the platform in case one of the
device drivers' .suspend() routines returns error code. Namely,
ACPI 1.0 specifies that _PTS should be called before suspending
devices, but _WAK still should be called before resuming them in
order to undo the changes made by _PTS. However, if there is an
error during suspending devices, they are automatically resumed
without returning control to the PM core, so the _WAK has to be
called from within device_resume() in that cases.
The patch also reorders and refactors the ACPI suspend/hibernation
code to avoid duplication as far as reasonably possible.
Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
---
Documentation/kernel-parameters.txt | 5
drivers/acpi/sleep/main.c | 301 +++++++++++++++++++++---------------
drivers/base/power/main.c | 15 +
include/linux/pm.h | 2
4 files changed, 201 insertions(+), 122 deletions(-)
Index: linux-2.6/Documentation/kernel-parameters.txt
===================================================================
--- linux-2.6.orig/Documentation/kernel-parameters.txt
+++ linux-2.6/Documentation/kernel-parameters.txt
@@ -170,6 +170,11 @@ and is between 256 and 4096 characters.
acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA
Format: <irq>,<irq>...
+ acpi_old_suspend_ordering [HW,ACPI]
+ Enforce the ACPI 1.0 ordering of the _PTS control
+ method wrt putting devices into low power states
+ default: ACPI 2.0 ordering of _PTS
+
acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT
acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS
Index: linux-2.6/drivers/acpi/sleep/main.c
===================================================================
--- linux-2.6.orig/drivers/acpi/sleep/main.c
+++ linux-2.6/drivers/acpi/sleep/main.c
@@ -15,6 +15,7 @@
#include <linux/dmi.h>
#include <linux/device.h>
#include <linux/suspend.h>
+#include <linux/pm.h>
#include <asm/io.h>
@@ -24,10 +25,6 @@
u8 sleep_states[ACPI_S_STATE_COUNT];
-#ifdef CONFIG_PM_SLEEP
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-#endif
-
static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
@@ -50,9 +47,107 @@ static int acpi_sleep_prepare(u32 acpi_s
return 0;
}
-#ifdef CONFIG_SUSPEND
-static struct platform_suspend_ops acpi_suspend_ops;
+#ifdef CONFIG_PM_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+static int init_8259A_after_S1;
+
+/*
+ * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
+ * user to request that behavior by using the 'acpi_old_suspend_ordering'
+ * kernel command line option that causes the following variable to be set.
+ */
+static bool old_suspend_ordering;
+
+static int __init acpi_old_suspend_ordering(char *str)
+{
+ old_suspend_ordering = true;
+ return 1;
+}
+__setup("acpi_old_suspend_ordering", acpi_old_suspend_ordering);
+
+/**
+ * acpi_pm_disable_gpes - Disable the GPEs.
+ */
+static int acpi_pm_disable_gpes(void)
+{
+ acpi_hw_disable_all_gpes();
+ return 0;
+}
+
+/**
+ * __acpi_pm_prepare - Prepare the platform to enter the target state.
+ *
+ * If necessary, set the firmware waking vector and do arch-specific
+ * nastiness to get the wakeup code to the waking vector.
+ */
+static int __acpi_pm_prepare(void)
+{
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
+
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+ return error;
+}
+
+/**
+ * acpi_pm_prepare - Prepare the platform to enter the target sleep
+ * state and disable the GPEs.
+ */
+static int acpi_pm_prepare(void)
+{
+ int error = __acpi_pm_prepare();
+
+ if (!error)
+ acpi_hw_disable_all_gpes();
+ return error;
+}
+
+/**
+ * acpi_pm_finish - Instruct the platform to leave a sleep state.
+ *
+ * This is called after we wake back up (or if entering the sleep state
+ * failed).
+ */
+static void acpi_pm_finish(void)
+{
+ u32 acpi_state = acpi_target_sleep_state;
+
+ if (acpi_state == ACPI_STATE_S0)
+ return;
+
+ printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
+ acpi_state);
+ acpi_disable_wakeup_device(acpi_state);
+ acpi_leave_sleep_state(acpi_state);
+
+ /* reset firmware waking vector */
+ acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+
+ acpi_target_sleep_state = ACPI_STATE_S0;
+
+#ifdef CONFIG_X86
+ if (acpi_state == ACPI_STATE_S1 && init_8259A_after_S1) {
+ printk("Broken toshiba laptop -> kicking interrupts\n");
+ init_8259A(0);
+ }
+#endif
+}
+
+/**
+ * acpi_pm_end - Finish up suspend sequence.
+ */
+static void acpi_pm_end(void)
+{
+ /*
+ * This is necessary in case acpi_pm_finish() is not called during a
+ * failing transition to a sleep state.
+ */
+ acpi_target_sleep_state = ACPI_STATE_S0;
+}
+#endif /* CONFIG_PM_SLEEP */
+#ifdef CONFIG_SUSPEND
extern void do_suspend_lowlevel(void);
static u32 acpi_suspend_states[] = {
@@ -62,13 +157,10 @@ static u32 acpi_suspend_states[] = {
[PM_SUSPEND_MAX] = ACPI_STATE_S5
};
-static int init_8259A_after_S1;
-
/**
* acpi_suspend_begin - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
*/
-
static int acpi_suspend_begin(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
@@ -85,25 +177,6 @@ static int acpi_suspend_begin(suspend_st
}
/**
- * acpi_suspend_prepare - Do preliminary suspend work.
- *
- * If necessary, set the firmware waking vector and do arch-specific
- * nastiness to get the wakeup code to the waking vector.
- */
-
-static int acpi_suspend_prepare(void)
-{
- int error = acpi_sleep_prepare(acpi_target_sleep_state);
-
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
-
- return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
-}
-
-/**
* acpi_suspend_enter - Actually enter a sleep state.
* @pm_state: ignored
*
@@ -111,7 +184,6 @@ static int acpi_suspend_prepare(void)
* assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
-
static int acpi_suspend_enter(suspend_state_t pm_state)
{
acpi_status status = AE_OK;
@@ -168,46 +240,6 @@ static int acpi_suspend_enter(suspend_st
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
}
-/**
- * acpi_suspend_finish - Instruct the platform to leave a sleep state.
- *
- * This is called after we wake back up (or if entering the sleep state
- * failed).
- */
-
-static void acpi_suspend_finish(void)
-{
- u32 acpi_state = acpi_target_sleep_state;
-
- acpi_disable_wakeup_device(acpi_state);
- acpi_leave_sleep_state(acpi_state);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
- acpi_target_sleep_state = ACPI_STATE_S0;
-
-#ifdef CONFIG_X86
- if (init_8259A_after_S1) {
- printk("Broken toshiba laptop -> kicking interrupts\n");
- init_8259A(0);
- }
-#endif
-}
-
-/**
- * acpi_suspend_end - Finish up suspend sequence.
- */
-
-static void acpi_suspend_end(void)
-{
- /*
- * This is necessary in case acpi_suspend_finish() is not called during a
- * failing transition to a sleep state.
- */
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
-
static int acpi_suspend_state_valid(suspend_state_t pm_state)
{
u32 acpi_state;
@@ -227,10 +259,38 @@ static int acpi_suspend_state_valid(susp
static struct platform_suspend_ops acpi_suspend_ops = {
.valid = acpi_suspend_state_valid,
.begin = acpi_suspend_begin,
- .prepare = acpi_suspend_prepare,
+ .prepare = acpi_pm_prepare,
+ .enter = acpi_suspend_enter,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
+};
+
+/**
+ * acpi_suspend_begin_old - Set the target system sleep state to the
+ * state associated with given @pm_state, if supported, and
+ * execute the _PTS control method. This function is used if the
+ * pre-ACPI 2.0 suspend ordering has been requested.
+ */
+static int acpi_suspend_begin_old(suspend_state_t pm_state)
+{
+ int error = acpi_suspend_begin(pm_state);
+
+ if (!error)
+ error = __acpi_pm_prepare();
+ return error;
+}
+
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_suspend_ops acpi_suspend_ops_old = {
+ .valid = acpi_suspend_state_valid,
+ .begin = acpi_suspend_begin_old,
+ .prepare = acpi_pm_disable_gpes,
.enter = acpi_suspend_enter,
- .finish = acpi_suspend_finish,
- .end = acpi_suspend_end,
+ .finish = acpi_pm_finish,
+ .end = acpi_pm_end,
};
/*
@@ -269,22 +329,9 @@ __setup("acpi_s4_nosigcheck", acpi_s4_no
static int acpi_hibernation_begin(void)
{
acpi_target_sleep_state = ACPI_STATE_S4;
-
return 0;
}
-static int acpi_hibernation_prepare(void)
-{
- int error = acpi_sleep_prepare(ACPI_STATE_S4);
-
- if (error) {
- acpi_target_sleep_state = ACPI_STATE_S0;
- return error;
- }
-
- return ACPI_SUCCESS(acpi_hw_disable_all_gpes()) ? 0 : -EFAULT;
-}
-
static int acpi_hibernation_enter(void)
{
acpi_status status = AE_OK;
@@ -320,52 +367,54 @@ static void acpi_hibernation_leave(void)
}
}
-static void acpi_hibernation_finish(void)
+static void acpi_pm_enable_gpes(void)
{
- acpi_disable_wakeup_device(ACPI_STATE_S4);
- acpi_leave_sleep_state(ACPI_STATE_S4);
-
- /* reset firmware waking vector */
- acpi_set_firmware_waking_vector((acpi_physical_address) 0);
-
- acpi_target_sleep_state = ACPI_STATE_S0;
+ acpi_hw_enable_all_runtime_gpes();
}
-static void acpi_hibernation_end(void)
-{
- /*
- * This is necessary in case acpi_hibernation_finish() is not called
- * during a failing transition to the sleep state.
- */
- acpi_target_sleep_state = ACPI_STATE_S0;
-}
+static struct platform_hibernation_ops acpi_hibernation_ops = {
+ .begin = acpi_hibernation_begin,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_pm_prepare,
+ .finish = acpi_pm_finish,
+ .prepare = acpi_pm_prepare,
+ .enter = acpi_hibernation_enter,
+ .leave = acpi_hibernation_leave,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
+};
-static int acpi_hibernation_pre_restore(void)
+/**
+ * acpi_hibernation_begin_old - Set the target system sleep state to
+ * ACPI_STATE_S4 and execute the _PTS control method. This
+ * function is used if the pre-ACPI 2.0 suspend ordering has been
+ * requested.
+ */
+static int acpi_hibernation_begin_old(void)
{
- acpi_status status;
-
- status = acpi_hw_disable_all_gpes();
-
- return ACPI_SUCCESS(status) ? 0 : -EFAULT;
-}
+ int error = acpi_sleep_prepare(ACPI_STATE_S4);
-static void acpi_hibernation_restore_cleanup(void)
-{
- acpi_hw_enable_all_runtime_gpes();
+ if (!error)
+ acpi_target_sleep_state = ACPI_STATE_S4;
+ return error;
}
-static struct platform_hibernation_ops acpi_hibernation_ops = {
- .begin = acpi_hibernation_begin,
- .end = acpi_hibernation_end,
- .pre_snapshot = acpi_hibernation_prepare,
- .finish = acpi_hibernation_finish,
- .prepare = acpi_hibernation_prepare,
+/*
+ * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
+ * been requested.
+ */
+static struct platform_hibernation_ops acpi_hibernation_ops_old = {
+ .begin = acpi_hibernation_begin_old,
+ .end = acpi_pm_end,
+ .pre_snapshot = acpi_pm_disable_gpes,
+ .finish = acpi_pm_finish,
+ .prepare = acpi_pm_disable_gpes,
.enter = acpi_hibernation_enter,
.leave = acpi_hibernation_leave,
- .pre_restore = acpi_hibernation_pre_restore,
- .restore_cleanup = acpi_hibernation_restore_cleanup,
+ .pre_restore = acpi_pm_disable_gpes,
+ .restore_cleanup = acpi_pm_enable_gpes,
};
-#endif /* CONFIG_HIBERNATION */
+#endif /* CONFIG_HIBERNATION */
int acpi_suspend(u32 acpi_state)
{
@@ -509,13 +558,15 @@ int __init acpi_sleep_init(void)
}
}
- suspend_set_ops(&acpi_suspend_ops);
+ suspend_set_ops(old_suspend_ordering ?
+ &acpi_suspend_ops_old : &acpi_suspend_ops);
#endif
#ifdef CONFIG_HIBERNATION
status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
- hibernation_set_ops(&acpi_hibernation_ops);
+ hibernation_set_ops(old_suspend_ordering ?
+ &acpi_hibernation_ops_old : &acpi_hibernation_ops);
sleep_states[ACPI_STATE_S4] = 1;
printk(" S4");
if (!nosigcheck) {
@@ -527,6 +578,12 @@ int __init acpi_sleep_init(void)
}
}
#endif
+
+#ifdef CONFIG_PM_SLEEP
+ if (old_suspend_ordering)
+ platform_pm_recover = acpi_pm_finish;
+#endif
+
status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
if (ACPI_SUCCESS(status)) {
sleep_states[ACPI_STATE_S5] = 1;
Index: linux-2.6/drivers/base/power/main.c
===================================================================
--- linux-2.6.orig/drivers/base/power/main.c
+++ linux-2.6/drivers/base/power/main.c
@@ -28,6 +28,20 @@
#include "power.h"
/*
+ * Some platforms (most importantly ACPI) may need to be prepared for
+ * resuming devices in case of a failure to suspend them. They should set
+ * this pointer to the routine that will always be called just prior to resuming
+ * devices.
+ */
+void (*platform_pm_recover)(void);
+
+static inline void recover_platform(void)
+{
+ if (platform_pm_recover)
+ platform_pm_recover();
+}
+
+/*
* The entries in the dpm_list list are in a depth first order, simply
* because children are guaranteed to be discovered after parents, and
* are inserted at the back of the list on discovery.
@@ -511,6 +525,7 @@ static void dpm_complete(pm_message_t st
void device_resume(pm_message_t state)
{
might_sleep();
+ recover_platform();
dpm_resume(state);
dpm_complete(state);
}
Index: linux-2.6/include/linux/pm.h
===================================================================
--- linux-2.6.orig/include/linux/pm.h
+++ linux-2.6/include/linux/pm.h
@@ -445,6 +445,8 @@ struct dev_pm_info {
*/
#ifdef CONFIG_PM_SLEEP
+extern void (*platform_pm_recover)(void);
+
extern void device_pm_lock(void);
extern void device_power_up(pm_message_t state);
extern void device_resume(pm_message_t state);
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
