On Thursday 20 March 2008, Rafael J. Wysocki wrote:
> The original code executed platform_pci_choose_state() first, if defined, and
> if that succeeded, it just returned the result. You put
> platform_pci_choose_state() under the switch(). :-)
So the updated patch just chooses a new state when drivers are
supposed to enter a lowpowerstate: SUSPEND and HIBERNATE.
Appended.
> In fact the entire switch() in pci_choose_state() is just confusing.
All it does is implement the rules that have been defined for
ages now: most of the pm_message_t transitions should not
change device power states.
> I'd make
> it return PCI_D3hot if platform_pci_choose_state() is undefined or fails
See above: this implements the current rules, which say
that in most cases devices shoudn't change powerstates.
> > > I really don't think pci_choose_state() should take the state argument at all.
> >
> > There is no "state" argument. It's a pm_message_t, which does
> > not package the target state.
>
> Correct, but the pm_message_t argument is called 'state', confusingly so.
Which was (and is!) one of the cleanups in $SUBJECT.
- Dave
======== CUT HERE
Clean up pci_choose_state():
- pci_choose_state() should only return PCI_D0, unless the system is
entering a suspend (or hibernate) system state.
- Only use platform_pci_choose_state() when entering a suspend
state ... and avoid PCI_D1 and PCI_D2 when appropriate.
- Corrrect kerneldoc.
Note that for now only ACPI provides platform_pci_choose_state(), so
this could be a minor change in behavior on some non-PC systems: it
avoids D3 except in the final stage of hibernation.
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/pci/pci.c | 49 ++++++++++++++++++++++++++-----------------------
1 file changed, 26 insertions(+), 23 deletions(-)
--- g26.orig/drivers/pci/pci.c 2008-03-20 03:02:46.000000000 -0700
+++ g26/drivers/pci/pci.c 2008-03-21 00:51:19.000000000 -0700
@@ -523,46 +523,49 @@ pci_set_power_state(struct pci_dev *dev,
}
pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
-
+
/**
* pci_choose_state - Choose the power state of a PCI device
* @dev: PCI device to be suspended
- * @state: target sleep state for the whole system. This is the value
- * that is passed to suspend() function.
+ * @mesg: value passed to suspend() function.
*
* Returns PCI power state suitable for given device and given system
- * message.
+ * power state transition.
*/
-
-pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
+pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t mesg)
{
pci_power_t ret;
+ /* PCI legacy PM? */
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
- if (platform_pci_choose_state) {
- ret = platform_pci_choose_state(dev, state);
- if (ret != PCI_POWER_ERROR)
- return ret;
- }
-
- switch (state.event) {
- case PM_EVENT_ON:
- return PCI_D0;
- case PM_EVENT_FREEZE:
- case PM_EVENT_PRETHAW:
- /* REVISIT both freeze and pre-thaw "should" use D0 */
+ switch (mesg.event) {
case PM_EVENT_SUSPEND:
case PM_EVENT_HIBERNATE:
- return PCI_D3hot;
+ /* NOTE: platform_pci_choose_state() should only return
+ * states where wakeup won't work if
+ * - !device_may_wakeup(&dev->dev), or
+ * - dev can't wake from the target system state
+ */
+ if (platform_pci_choose_state) {
+ ret = platform_pci_choose_state(dev, mesg);
+ if (ret == PCI_POWER_ERROR)
+ ret = PCI_D3hot;
+ else if ((ret == PCI_D1 || ret == PCI_D2)
+ && pci_no_d1d2(dev))
+ ret = PCI_D3hot;
+ break;
+ }
+ /* D3hot works, but may be suboptimal */
+ ret = PCI_D3hot;
+ break;
default:
- printk("Unrecognized suspend event %d\n", state.event);
- BUG();
+ ret = PCI_D0;
+ break;
}
- return PCI_D0;
+ return ret;
}
-
EXPORT_SYMBOL(pci_choose_state);
static int pci_save_pcie_state(struct pci_dev *dev)
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
