* Pavel Machek <pavel@xxxxxx> wrote:
> > Since this is increasingly unrelated to the "sleepy linux" concept
> > (a version of what systems like OLPC, N700, and N800 are doing), I
> > got rid of the "sleepy.c" file.
>
> What was the decision here? Ingo, did you merge this for 2.6.26, or
> just for your test farm?
it's working fine here, i've had it in my test-setup for a long time,
and it triggers every now and then.
We should merge the patch below. My only gripe that should be solved in
an add-on patch is that right now it triggers with an about 1:100 chance
in randconfig tests. The reason is the insane amount of user-selected
options to get this vital functionality done. Could we _PLEASE_ get a
prominent "new, cool RTC driver stuff" config option that just select's
all the other options?
> > drivers/char/Kconfig | 5 +
> > drivers/rtc/Kconfig | 1
> > kernel/power/Kconfig | 10 +++
> > kernel/power/main.c | 163 +++++++++++++++++++++++++++++++++++++++++++++++++++
> > 4 files changed, 178 insertions(+), 1 deletion(-)
this cannot really go via x86.git.
Linus, could you please apply the debug patch below? It's really useful
and it is catching suspend/resume bugs as well.
Ingo
------------>
Subject: suspend/resume self-test
From: David Brownell <david-b@xxxxxxxxxxx>
Boot-time test for system suspend states (STR or standby). The generic
RTC framework triggers wakeup alarms, used to exit those states.
- Measures some aspects of suspend time; uses "jiffies". This
should probably use a clocksource instead, since those often
work properly even while IRQs are disabled.
- Includes a command line parameter, which needs work yet ... it
currently turns this test off, but it should also let the target
state be specified (and maybe even default to "no test").
Lightly tested on an ARM system, which reported that suspending devices
took 7 msec and resuming them took 132 msec:
* The PCMCIA stack misbehaved a bit. It didn't finish enumerating
the card before it suspended, so the wakeup event came from the
CF card IRQ not from the RTC!
* The MMC stack misbehaved more seriously. It wants to remove devices
during the suspend sequence (quite needlessly, on this hardware),
which now makes Linux unhappy.
Workaround in both cases was to take the memory card out before booting.
Also includes some Kconfig tweaks to help reduce configuration bugs on
x86, by avoiding the legacy RTC driver when the generic RTC framework
is enabled ... those should become a separate patch.
Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
---
drivers/char/Kconfig | 5 +
drivers/rtc/Kconfig | 1
kernel/power/Kconfig | 10 +++
kernel/power/main.c | 163 +++++++++++++++++++++++++++++++++++++++++++++++++++
4 files changed, 178 insertions(+), 1 deletion(-)
Index: linux/drivers/char/Kconfig
===================================================================
--- linux.orig/drivers/char/Kconfig
+++ linux/drivers/char/Kconfig
@@ -706,9 +706,12 @@ config NVRAM
To compile this driver as a module, choose M here: the
module will be called nvram.
+comment "You are using the RTC framework, not the legacy CMOS RTC driver"
+ depends on RTC_DRV_CMOS
+
config RTC
tristate "Enhanced Real Time Clock Support"
- depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390
+ depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV && !ARM && !SUPERH && !S390 && !RTC_DRV_CMOS
---help---
If you say Y here and create a character special file /dev/rtc with
major number 10 and minor number 135 using mknod ("man mknod"), you
Index: linux/drivers/rtc/Kconfig
===================================================================
--- linux.orig/drivers/rtc/Kconfig
+++ linux/drivers/rtc/Kconfig
@@ -294,6 +294,7 @@ comment "Platform RTC drivers"
config RTC_DRV_CMOS
tristate "PC-style 'CMOS'"
depends on X86 || ALPHA || ARM || M32R || ATARI || PPC || MIPS
+ default y if X86
help
Say "yes" here to get direct support for the real time clock
found in every PC or ACPI-based system, and some other boards.
Index: linux/kernel/power/Kconfig
===================================================================
--- linux.orig/kernel/power/Kconfig
+++ linux/kernel/power/Kconfig
@@ -104,6 +104,16 @@ config SUSPEND
powered and thus its contents are preserved, such as the
suspend-to-RAM state (e.g. the ACPI S3 state).
+config PM_TEST_SUSPEND
+ bool "Test suspend/resume and wakealarm during bootup"
+ depends on SUSPEND && PM_DEBUG && RTC_LIB=y
+ ---help---
+ This option will suspend your machine during bootup, and make
+ it wake up a few seconds later using the RTC's wakeup alarm.
+
+ You probably want to have your system's RTC driver statically
+ linked, ensuring that it's available when this test runs.
+
config SUSPEND_FREEZER
bool "Enable freezer for suspend to RAM/standby" \
if ARCH_WANTS_FREEZER_CONTROL || BROKEN
Index: linux/kernel/power/main.c
===================================================================
--- linux.orig/kernel/power/main.c
+++ linux/kernel/power/main.c
@@ -132,6 +132,52 @@ static inline int suspend_test(int level
#ifdef CONFIG_SUSPEND
+#ifdef CONFIG_PM_TEST_SUSPEND
+
+/*
+ * We test the system suspend code by setting an RTC wakealarm a short
+ * time in the future, then suspending. Suspending the devices won't
+ * normally take long ... some systems only need a few milliseconds.
+ *
+ * The time it takes is system-specific though, so when we test this
+ * during system bootup we allow a LOT of time.
+ */
+#define TEST_SUSPEND_SECONDS 5
+
+static unsigned long suspend_test_start_time;
+
+static void suspend_test_start(void)
+{
+ /* FIXME Use better timebase than "jiffies", ideally a clocksource.
+ * What we want is a hardware counter that will work correctly even
+ * during the irqs-are-off stages of the suspend/resume cycle...
+ */
+ suspend_test_start_time = jiffies;
+}
+
+static void suspend_test_finish(const char *label)
+{
+ long nj = jiffies - suspend_test_start_time;
+ unsigned msec;
+
+ msec = jiffies_to_msecs((nj >= 0) ? nj : -nj);
+ pr_info("PM: %s took %d.%03d seconds\n", label,
+ msec / 1000, msec % 1000);
+ WARN_ON_ONCE(msec > ((TEST_SUSPEND_SECONDS+5) * 1000));
+}
+
+#else
+
+static void suspend_test_start(void)
+{
+}
+
+static void suspend_test_finish(const char *label)
+{
+}
+
+#endif
+
/* This is just an arbitrary number */
#define FREE_PAGE_NUMBER (100)
@@ -264,11 +310,14 @@ int suspend_devices_and_enter(suspend_st
goto Close;
}
suspend_console();
+
+ suspend_test_start();
error = device_suspend(PMSG_SUSPEND);
if (error) {
printk(KERN_ERR "PM: Some devices failed to suspend\n");
goto Resume_console;
}
+ suspend_test_finish("suspend devices");
if (suspend_test(TEST_DEVICES))
goto Resume_devices;
@@ -291,7 +340,9 @@ int suspend_devices_and_enter(suspend_st
if (suspend_ops->finish)
suspend_ops->finish();
Resume_devices:
+ suspend_test_start();
device_resume();
+ suspend_test_finish("resume devices");
Resume_console:
resume_console();
Close:
@@ -515,3 +566,115 @@ static int __init pm_init(void)
}
core_initcall(pm_init);
+
+
+#ifdef CONFIG_PM_TEST_SUSPEND
+
+#include <linux/rtc.h>
+
+/*
+ * To test system suspend, we need a hands-off mechanism to resume the
+ * system. RTCs with wakeup alarms are the the most common mechanism
+ * that's self-contained.
+ */
+
+static void __init test_wakealarm(struct rtc_device *rtc, suspend_state_t state)
+{
+ static char err_readtime [] __initdata =
+ KERN_ERR "PM: can't read %s time, err %d\n";
+ static char err_wakealarm [] __initdata =
+ KERN_ERR "PM: can't set %s wakealarm, err %d\n";
+ static char err_suspend [] __initdata =
+ KERN_ERR "PM: suspend test failed, error %d\n";
+ static char info_test [] __initdata =
+ KERN_INFO "PM: test RTC wakeup from '%s' suspend\n";
+
+ unsigned long now;
+ struct rtc_wkalrm alm;
+ int status;
+
+ /* this may fail if the RTC hasn't been initialized */
+ status = rtc_read_time(rtc, &alm.time);
+ if (status < 0) {
+ printk(err_readtime, rtc->dev.bus_id, status);
+ return;
+ }
+ rtc_tm_to_time(&alm.time, &now);
+
+ memset(&alm, 0, sizeof alm);
+ rtc_time_to_tm(now + TEST_SUSPEND_SECONDS, &alm.time);
+ alm.enabled = true;
+
+ status = rtc_set_alarm(rtc, &alm);
+ if (status < 0) {
+ printk(err_wakealarm, rtc->dev.bus_id, status);
+ return;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ if (status == -ENODEV)
+ state = PM_SUSPEND_STANDBY;
+ }
+ if (state == PM_SUSPEND_STANDBY) {
+ printk(info_test, pm_states[state]);
+ status = pm_suspend(state);
+ }
+ if (status < 0)
+ printk(err_suspend, status);
+}
+
+static int __init has_wakealarm(struct device *dev, void *name_ptr)
+{
+ struct rtc_device *candidate = to_rtc_device(dev);
+
+ if (!candidate->ops->set_alarm)
+ return 0;
+ if (!device_may_wakeup(candidate->dev.parent))
+ return 0;
+
+ *(char **)name_ptr = dev->bus_id;
+ return 1;
+}
+
+/*
+ * We normally test Suspend-to-RAM, with standby as a backup when
+ * the system doesn't support that state. But we also need to be
+ * able to disable the powerup test, and tell it to ignore STR since
+ * the RTC may not work then.
+ */
+static suspend_state_t test_state __initdata = PM_SUSPEND_MEM;
+
+static int __init setup_test_suspend(char *value)
+{
+ /* FIXME accept "standby", etc */
+ test_state = PM_SUSPEND_ON;
+ return 0;
+}
+__setup("test_suspend", setup_test_suspend);
+
+static int __init test_suspend(void)
+{
+ static char warn_no_rtc[] __initdata =
+ KERN_WARNING "PM: no wakealarm-capable RTC driver is ready\n";
+
+ char *pony = NULL;
+ struct rtc_device *rtc = NULL;
+
+ class_find_device(rtc_class, &pony, has_wakealarm);
+ if (pony)
+ rtc = rtc_class_open(pony);
+
+ if (rtc) {
+ if (test_state != PM_SUSPEND_ON)
+ test_wakealarm(rtc, test_state);
+ rtc_class_close(rtc);
+ } else
+ printk(warn_no_rtc);
+
+ return 0;
+}
+late_initcall(test_suspend);
+
+#endif /* CONFIG_PM_TEST_SUSPEND */
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
