Re: [rft] s2ram wakeup moves to .c, could fix few machines

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thursday, 7 of February 2008, Pavel Machek wrote:
> On Thu 2008-02-07 14:46:25, H. Peter Anvin wrote:
> > Pavel Machek wrote:
> >>
> >> This is probably more acceptable version of beep; but there are
> >> probably even better ways to clean it...
> >>
> >>         if (wakeup_header.realmode_flags & 4) {
> >>                 inb(97);
> >>                 outb(0, 0x80);
> >>                 outb(3, 97);
> >>                 outb(0, 0x80);
> >>                 outb(-74, 67);
> >>                 outb(0, 0x80);
> >>                 outb(-119, 66);
> >>                 outb(0, 0x80);
> >>                 outb(15, 66);
> >>         }
> >>
> >
> > What is available at this point -- are BIOS calls still accessible; are 
> > interrupts running?
> 
> No interrupts. BIOS calls work on some machines, but I'd like this to
> work when bios does not.
> 
> Actually, matthieu's code is probably better to start from:
> 
> +/* one ISA cycle @8Mhz */
> +#define PAUSE outb %al, $0x80
> +#define WAIT_100MS \
> +       movl $800000, %eax; \
> +       2: \
> +       PAUSE; \
> +       dec %eax; \
> +       jne 2b
> +
> +/* What's the PIT rate */
> +#define COUNT 0xf89
>  #define BEEP \
> -       inb     $97, %al;       \
> -       outb    %al, $0x80;     \
> -       movb    $3, %al;        \
> -       outb    %al, $97;       \
> -       outb    %al, $0x80;     \
> -       movb    $-74, %al;      \
> -       outb    %al, $67;       \
> -       outb    %al, $0x80;     \
> -       movb    $-119, %al;     \
> -       outb    %al, $66;       \
> -       outb    %al, $0x80;     \
> -       movb    $15, %al;       \
> -       outb    %al, $66;
> +       /* enable counter 2 */ \
> +       inb             $0x61, %al;     \
> +       PAUSE;  \
> +       orb     $3, %al; \
> +       outb    %al, $0x61;     \
> +       PAUSE;  \
> +       /* set command for counter 2, 2 byte write */ \
> +       movb    $0xB6, %al;     \
> +       outb    %al, $0x43;     \
> +       PAUSE;  \
> +       /* select desired HZ */ \
> +       movb    $(COUNT & 0xff), %al; \
> +       outb    %al, $0x42;     \
> +       PAUSE;  \
> +       movb    $(COUNT >> 8), %al;     \
> +       outb    %al, $0x42; \
> +       WAIT_100MS; \
> +       /* disable counter 2 */ \
> +       inb             $0x61, %al;     \
> +       PAUSE;  \
> +       andb    $0xFC, %al; \
> +       outb    %al, $0x61; \
> +       WAIT_100MS
> +
> +#define CBEEP \
> +       testl   $4, realmode_flags - wakeup_code; \
> +       jz      1f; \
> +       BEEP; \
> +1:
> 
> ...because it allows user to compute number of beeps.

Hm, it seems we can convert it at least partially to C.

Rafael
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux