On Monday, 7 of January 2008, Shaohua Li wrote:
>
> On Sat, 2008-01-05 at 04:44 +0800, Rafael J. Wysocki wrote:
> > On Friday, 4 of January 2008, Shaohua Li wrote:
> > >
> > > On Fri, 2008-01-04 at 01:04 +0800, Rafael J. Wysocki wrote:
> > > > On Thursday, 3 of January 2008, Shaohua Li wrote:
> > > > >
> > > > > On Wed, 2008-01-02 at 22:05 +0800, Rafael J. Wysocki wrote:
> > > > > > On Wednesday, 2 of January 2008, Shaohua Li wrote:
> > > > > > > ACPI defines a hardware signature. BIOS calculates the
> > signature
> > > > > > > according to hardware configure, if hardware changes, the
> > > > signature
> > > > > > will
> > > > > > > change, in this case, S4 resume should fail.
> > > > > >
> > > > > > The idea is fine, but I'd prefer to do that in a more
> > > > straightforward
> > > > > > way.
> > > > > > Namely, we can just:
> > > > > > * write the signature into a variable in, for example,
> > > > > > acpi_hibernation_prepare() (then, the "old" signature value
> > will
> > > > be
> > > > > > automatically saved in the image)
> > > > > > * compare it with a the "new" value read from the BIOS in
> > > > > > acpi_hibernation_leave() and panic if there's a mismatch
> > > > > > * add a configuration option to disable this behavior (just in
> > > > case)
> > > > > > This way we can avoid modifying the entire generic interface
> > to
> > > > add
> > > > > > the feature
> > > > > > specific to ACPI.
> > > > > it would be better we do the check in boot kernel.
> > > > Franky, I think we should also check in the image kernel, in case
> > the
> > > > boot
> > > > one doesn't support ACPI as I said.
> > > Ok, makes sense. I changed to check the signature
> > in .higberation_leave
> >
> > Thanks, comments below.
> >
> > > Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
> > > ---
> > > drivers/acpi/sleep/main.c | 20 ++++++++++++++++++++
> > > 1 file changed, 20 insertions(+)
> > >
> > > Index: linux/drivers/acpi/sleep/main.c
> > > ===================================================================
> > > --- linux.orig/drivers/acpi/sleep/main.c 2008-01-03
> > 13:37:08.000000000 +0800
> > > +++ linux/drivers/acpi/sleep/main.c 2008-01-04 13:36:10.000000000
> > +0800
> > > @@ -256,6 +256,17 @@ static int acpi_hibernation_enter(void)
> > > return ACPI_SUCCESS(status) ? 0 : -EFAULT;
> > > }
> > >
> > > +static unsigned long s4_hardware_signature;
> > > +static struct acpi_table_facs *facs;
> > > +static int nosigcheck;
> >
> > Use bool perhaps?
> >
> > > +
> > > +static int __init acpi_s4_nosigcheck(char *str)
> > > +{
> > > + nosigcheck = 1;
> >
> > And "true" here?
> >
> > > + return 1;
> > > +}
> > > +__setup("acpi_s4_nosigcheck", acpi_s4_nosigcheck);
> > > +
> >
> > Please put this function at the end of the file. Also, I'd call it
> > "acpi_s4_nosig", but whatever.
> Fixed all except this one, the routine is defined with HIBERATION
> configed.
I've just realized that we're not doing the right thing here ...
> Signed-off-by: Shaohua Li <shaohua.li@xxxxxxxxx>
> ---
> drivers/acpi/sleep/main.c | 22 ++++++++++++++++++++++
> 1 file changed, 22 insertions(+)
>
> Index: linux/drivers/acpi/sleep/main.c
> ===================================================================
> --- linux.orig/drivers/acpi/sleep/main.c 2008-01-04 13:44:40.000000000 +0800
> +++ linux/drivers/acpi/sleep/main.c 2008-01-07 09:31:42.000000000 +0800
> @@ -256,6 +256,17 @@ static int acpi_hibernation_enter(void)
> return ACPI_SUCCESS(status) ? 0 : -EFAULT;
> }
>
> +static unsigned long s4_hardware_signature;
> +static struct acpi_table_facs *facs;
> +static bool nosigcheck;
> +
> +static int __init acpi_s4_nosigcheck(char *str)
> +{
> + nosigcheck = true;
> + return 1;
> +}
> +__setup("acpi_s4_nosigcheck", acpi_s4_nosigcheck);
> +
> static void acpi_hibernation_leave(void)
> {
> /*
> @@ -263,6 +274,10 @@ static void acpi_hibernation_leave(void)
> * enable it here.
> */
> acpi_enable();
> + if (facs && s4_hardware_signature != facs->hardware_signature) {
... because we should read the signature from the hardware here, while we're
comparing two values read from memory. They will always be equal. :-)
> + printk(KERN_EMERG"PM: Hardware changed in the S4 circle, can't resume\n");
> + panic("S4 resume error");
> + }
> }
>
> static void acpi_hibernation_finish(void)
> @@ -448,6 +463,13 @@ int __init acpi_sleep_init(void)
> hibernation_set_ops(&acpi_hibernation_ops);
> sleep_states[ACPI_STATE_S4] = 1;
> printk(" S4");
> + if (!nosigcheck) {
> + acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS,
> + (struct acpi_table_header **)&facs);
> + if (facs)
> + s4_hardware_signature =
> + facs->hardware_signature;
> + }
> }
> #endif
> status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
>
>
> -
Greetings,
Rafael
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm
