[RFC] powermac: proper sleep management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This adds platform_suspend_ops for PMU based machines, directly in
the PMU driver. This finally allows suspending via /sys/power/state
on powerbooks.

The patch also replaces the PMU ioctl with a simple call to
pm_suspend(PM_SUSPEND_MEM) and puts the sleep-related PMU ioctls onto
the feature-removal schedule, to be removed in early 2010 (just
over two years from now).

Signed-off-by: Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
---
Just thought I'd send out the patch again, it has changed quite a bit
since last time because I cleaned up the code, made it depend on
CONFIG_SUSPEND, made the ioctl backward compatibility optional and some
other bits.

The feared freezer vs. fuse sync deadlock is no longer present in 2.6.24
because the sync is done before the freezer so maybe the patch stands a
chance now.

Scott: FYI, here's the use case for the ppc_md irq suspend/resume hooks.

 Documentation/feature-removal-schedule.txt |   10 
 drivers/macintosh/Kconfig                  |   12 
 drivers/macintosh/via-pmu.c                |  511 ++++++++++-------------------
 3 files changed, 207 insertions(+), 326 deletions(-)

--- everything.orig/drivers/macintosh/via-pmu.c	2007-11-08 11:48:53.112861818 +0100
+++ everything/drivers/macintosh/via-pmu.c	2007-11-08 11:49:21.592846626 +0100
@@ -10,13 +10,13 @@
  *
  * Copyright (C) 1998 Paul Mackerras and Fabio Riccardi.
  * Copyright (C) 2001-2002 Benjamin Herrenschmidt
+ * Copyright (C) 2006-2007 Johannes Berg
  *
  * THIS DRIVER IS BECOMING A TOTAL MESS !
  *  - Cleanup atomically disabling reply to PMU events after
  *    a sleep or a freq. switch
- *  - Move sleep code out of here to pmac_pm, merge into new
- *    common PM infrastructure
- *  - Save/Restore PCI space properly
+ *  - check if powerbook 3400 really needs the extra PCI
+ *    save/restore code we have
  *
  */
 #include <stdarg.h>
@@ -63,9 +63,6 @@
 
 #include "via-pmu-event.h"
 
-/* Some compile options */
-#define DEBUG_SLEEP
-
 /* Misc minor number allocated for /dev/pmu */
 #define PMU_MINOR		154
 
@@ -149,12 +146,9 @@ static spinlock_t pmu_lock;
 static u8 pmu_intr_mask;
 static int pmu_version;
 static int drop_interrupts;
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 static int option_lid_wakeup = 1;
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
-#if (defined(CONFIG_PM_SLEEP)&&defined(CONFIG_PPC32))||defined(CONFIG_PMAC_BACKLIGHT_LEGACY)
-static int sleep_in_progress;
-#endif
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 static unsigned long async_req_locks;
 static unsigned int pmu_irq_stats[11];
 
@@ -218,11 +212,6 @@ extern void low_sleep_handler(void);
 extern void enable_kernel_altivec(void);
 extern void enable_kernel_fp(void);
 
-#ifdef DEBUG_SLEEP
-int pmu_polled_request(struct adb_request *req);
-int pmu_wink(struct adb_request *req);
-#endif
-
 /*
  * This table indicates for each PMU opcode:
  * - the number of data bytes to be sent with the command, or -1
@@ -871,7 +860,7 @@ proc_read_options(char *page, char **sta
 {
 	char *p = page;
 
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 	if (pmu_kind == PMU_KEYLARGO_BASED &&
 	    pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
 		p += sprintf(p, "lid_wakeup=%d\n", option_lid_wakeup);
@@ -912,7 +901,7 @@ proc_write_options(struct file *file, co
 	*(val++) = 0;
 	while(*val == ' ')
 		val++;
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 	if (pmu_kind == PMU_KEYLARGO_BASED &&
 	    pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) >= 0)
 		if (!strcmp(label, "lid_wakeup"))
@@ -1718,7 +1707,7 @@ pmu_present(void)
 	return via != 0;
 }
 
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 /*
  * This struct is used to store config register values for
  * PCI devices which may get powered off when we sleep.
@@ -1821,43 +1810,6 @@ pbook_pci_restore(void)
 	}
 }
 
-#ifdef DEBUG_SLEEP
-/* N.B. This doesn't work on the 3400 */
-void 
-pmu_blink(int n)
-{
-	struct adb_request req;
-
-	memset(&req, 0, sizeof(req));
-
-	for (; n > 0; --n) {
-		req.nbytes = 4;
-		req.done = NULL;
-		req.data[0] = 0xee;
-		req.data[1] = 4;
-		req.data[2] = 0;
-		req.data[3] = 1;
-		req.reply[0] = ADB_RET_OK;
-		req.reply_len = 1;
-		req.reply_expected = 0;
-		pmu_polled_request(&req);
-		mdelay(50);
-		req.nbytes = 4;
-		req.done = NULL;
-		req.data[0] = 0xee;
-		req.data[1] = 4;
-		req.data[2] = 0;
-		req.data[3] = 0;
-		req.reply[0] = ADB_RET_OK;
-		req.reply_len = 1;
-		req.reply_expected = 0;
-		pmu_polled_request(&req);
-		mdelay(50);
-	}
-	mdelay(50);
-}
-#endif
-
 /*
  * Put the powerbook to sleep.
  */
@@ -1894,122 +1846,6 @@ restore_via_state(void)
 
 extern void pmu_backlight_set_sleep(int sleep);
 
-static int
-pmac_suspend_devices(void)
-{
-	int ret;
-
-	pm_prepare_console();
-	
-	/* Sync the disks. */
-	/* XXX It would be nice to have some way to ensure that
-	 * nobody is dirtying any new buffers while we wait. That
-	 * could be achieved using the refrigerator for processes
-	 * that swsusp uses
-	 */
-	sys_sync();
-
-	/* Send suspend call to devices, hold the device core's dpm_sem */
-	ret = device_suspend(PMSG_SUSPEND);
-	if (ret) {
-		printk(KERN_ERR "Driver sleep failed\n");
-		return -EBUSY;
-	}
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-	/* Tell backlight code not to muck around with the chip anymore */
-	pmu_backlight_set_sleep(1);
-#endif
-
-	/* Call platform functions marked "on sleep" */
-	pmac_pfunc_i2c_suspend();
-	pmac_pfunc_base_suspend();
-
-	/* Stop preemption */
-	preempt_disable();
-
-	/* Make sure the decrementer won't interrupt us */
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
-	/* Make sure any pending DEC interrupt occurring while we did
-	 * the above didn't re-enable the DEC */
-	mb();
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
-
-	/* We can now disable MSR_EE. This code of course works properly only
-	 * on UP machines... For SMP, if we ever implement sleep, we'll have to
-	 * stop the "other" CPUs way before we do all that stuff.
-	 */
-	local_irq_disable();
-
-	/* Broadcast power down irq
-	 * This isn't that useful in most cases (only directly wired devices can
-	 * use this but still... This will take care of sysdev's as well, so
-	 * we exit from here with local irqs disabled and PIC off.
-	 */
-	ret = device_power_down(PMSG_SUSPEND);
-	if (ret) {
-		wakeup_decrementer();
-		local_irq_enable();
-		preempt_enable();
-		device_resume();
-		printk(KERN_ERR "Driver powerdown failed\n");
-		return -EBUSY;
-	}
-
-	/* Wait for completion of async requests */
-	while (!batt_req.complete)
-		pmu_poll();
-
-	/* Giveup the lazy FPU & vec so we don't have to back them
-	 * up from the low level code
-	 */
-	enable_kernel_fp();
-
-#ifdef CONFIG_ALTIVEC
-	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		enable_kernel_altivec();
-#endif /* CONFIG_ALTIVEC */
-
-	return 0;
-}
-
-static int
-pmac_wakeup_devices(void)
-{
-	mdelay(100);
-
-#ifdef CONFIG_PMAC_BACKLIGHT
-	/* Tell backlight code it can use the chip again */
-	pmu_backlight_set_sleep(0);
-#endif
-
-	/* Power back up system devices (including the PIC) */
-	device_power_up();
-
-	/* Force a poll of ADB interrupts */
-	adb_int_pending = 1;
-	via_pmu_interrupt(0, NULL);
-
-	/* Restart jiffies & scheduling */
-	wakeup_decrementer();
-
-	/* Re-enable local CPU interrupts */
-	local_irq_enable();
-	mdelay(10);
-	preempt_enable();
-
-	/* Call platform functions marked "on wake" */
-	pmac_pfunc_base_resume();
-	pmac_pfunc_i2c_resume();
-
-	/* Resume devices */
-	device_resume();
-
-	pm_restore_console();
-
-	return 0;
-}
-
 #define	GRACKLE_PM	(1<<7)
 #define GRACKLE_DOZE	(1<<5)
 #define	GRACKLE_NAP	(1<<4)
@@ -2020,19 +1856,12 @@ static int powerbook_sleep_grackle(void)
 	unsigned long save_l2cr;
 	unsigned short pmcr1;
 	struct adb_request req;
-	int ret;
 	struct pci_dev *grackle;
 
 	grackle = pci_get_bus_and_slot(0, 0);
 	if (!grackle)
 		return -ENODEV;
 
-	ret = pmac_suspend_devices();
-	if (ret) {
-		printk(KERN_ERR "Sleep rejected by devices\n");
-		return ret;
-	}
-	
 	/* Turn off various things. Darwin does some retry tests here... */
 	pmu_request(&req, NULL, 2, PMU_POWER_CTRL0, PMU_POW0_OFF|PMU_POW0_HARD_DRIVE);
 	pmu_wait_complete(&req);
@@ -2095,8 +1924,6 @@ static int powerbook_sleep_grackle(void)
 			PMU_POW_ON|PMU_POW_BACKLIGHT|PMU_POW_CHARGER|PMU_POW_IRLED|PMU_POW_MEDIABAY);
 	pmu_wait_complete(&req);
 
-	pmac_wakeup_devices();
-
 	return 0;
 }
 
@@ -2106,7 +1933,6 @@ powerbook_sleep_Core99(void)
 	unsigned long save_l2cr;
 	unsigned long save_l3cr;
 	struct adb_request req;
-	int ret;
 	
 	if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0) {
 		printk(KERN_ERR "Sleep mode not supported on this machine\n");
@@ -2116,12 +1942,6 @@ powerbook_sleep_Core99(void)
 	if (num_online_cpus() > 1 || cpu_is_offline(0))
 		return -EAGAIN;
 
-	ret = pmac_suspend_devices();
-	if (ret) {
-		printk(KERN_ERR "Sleep rejected by devices\n");
-		return ret;
-	}
-
 	/* Stop environment and ADB interrupts */
 	pmu_request(&req, NULL, 2, PMU_SET_INTR_MASK, 0);
 	pmu_wait_complete(&req);
@@ -2192,41 +2012,24 @@ powerbook_sleep_Core99(void)
 	/* Restore LPJ, cpufreq will adjust the cpu frequency */
 	loops_per_jiffy /= 2;
 
-	pmac_wakeup_devices();
-
 	return 0;
 }
 
 #define PB3400_MEM_CTRL		0xf8000000
 #define PB3400_MEM_CTRL_SLEEP	0x70
 
+static void __iomem *pb3400_mem_ctrl;
+
 static int
 powerbook_sleep_3400(void)
 {
-	int ret, i, x;
+	int i, x;
 	unsigned int hid0;
 	unsigned long p;
 	struct adb_request sleep_req;
-	void __iomem *mem_ctrl;
 	unsigned int __iomem *mem_ctrl_sleep;
 
-	/* first map in the memory controller registers */
-	mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
-	if (mem_ctrl == NULL) {
-		printk("powerbook_sleep_3400: ioremap failed\n");
-		return -ENOMEM;
-	}
-	mem_ctrl_sleep = mem_ctrl + PB3400_MEM_CTRL_SLEEP;
-
-	/* Allocate room for PCI save */
-	pbook_alloc_pci_save();
-
-	ret = pmac_suspend_devices();
-	if (ret) {
-		pbook_free_pci_save();
-		printk(KERN_ERR "Sleep rejected by devices\n");
-		return ret;
-	}
+	mem_ctrl_sleep = pb3400_mem_ctrl + PB3400_MEM_CTRL_SLEEP;
 
 	/* Save the state of PCI config space for some slots */
 	pbook_pci_save();
@@ -2271,14 +2074,10 @@ powerbook_sleep_3400(void)
 	while (asleep)
 		mb();
 
-	pmac_wakeup_devices();
-	pbook_free_pci_save();
-	iounmap(mem_ctrl);
-
 	return 0;
 }
 
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 
 /*
  * Support for /dev/pmu device
@@ -2451,6 +2250,157 @@ pmu_release(struct inode *inode, struct 
 	return 0;
 }
 
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
+static int powerbook_prepare_sleep(void)
+{
+	if (pmu_kind == PMU_OHARE_BASED) {
+		/* first map in the memory controller registers */
+		pb3400_mem_ctrl = ioremap(PB3400_MEM_CTRL, 0x100);
+		if (!pb3400_mem_ctrl) {
+			printk(KERN_ERR "powerbook_sleep_3400: "
+			       "ioremap failed\n");
+			return -ENOMEM;
+		}
+
+		/* Allocate room for PCI save */
+		pbook_alloc_pci_save();
+	}
+
+	return 0;
+}
+
+/*
+ * overrides the weak arch_suspend_disable_irqs in kernel/power/main.c
+ *
+ * XXX: Once Scott Wood's patch is merged, this needs to use the ppc_md
+ *	hooks that patch adds!
+ */
+void arch_suspend_disable_irqs(void)
+{
+#ifdef CONFIG_PMAC_BACKLIGHT
+	/* Tell backlight code not to muck around with the chip anymore */
+	pmu_backlight_set_sleep(1);
+#endif
+
+	/* Call platform functions marked "on sleep" */
+	pmac_pfunc_i2c_suspend();
+	pmac_pfunc_base_suspend();
+
+	/* Stop preemption */
+	preempt_disable();
+
+	/* Make sure the decrementer won't interrupt us */
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+	/* Make sure any pending DEC interrupt occurring while we did
+	 * the above didn't re-enable the DEC */
+	mb();
+	asm volatile("mtdec %0" : : "r" (0x7fffffff));
+
+	local_irq_disable();
+}
+
+static int powerbook_sleep(suspend_state_t state)
+{
+	int error = 0;
+
+	/* Wait for completion of async requests */
+	while (!batt_req.complete)
+		pmu_poll();
+
+	/* Giveup the lazy FPU & vec so we don't have to back them
+	 * up from the low level code
+	 */
+	enable_kernel_fp();
+
+#ifdef CONFIG_ALTIVEC
+	if (cpu_has_feature(CPU_FTR_ALTIVEC))
+		enable_kernel_altivec();
+#endif /* CONFIG_ALTIVEC */
+
+	switch (pmu_kind) {
+	case PMU_OHARE_BASED:
+		error = powerbook_sleep_3400();
+		break;
+	case PMU_HEATHROW_BASED:
+	case PMU_PADDINGTON_BASED:
+		error = powerbook_sleep_grackle();
+		break;
+	case PMU_KEYLARGO_BASED:
+		error = powerbook_sleep_Core99();
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	if (error)
+		return error;
+
+	mdelay(100);
+
+#ifdef CONFIG_PMAC_BACKLIGHT
+	/* Tell backlight code it can use the chip again */
+	pmu_backlight_set_sleep(0);
+#endif
+
+	return 0;
+}
+
+/*
+ * overrides the weak arch_suspend_enable_irqs in kernel/power/main.c
+ *
+ * XXX: Once Scott Wood's patch is merged, this needs to use the ppc_md
+ *	hooks that patch adds!
+ */
+void arch_suspend_enable_irqs(void)
+{
+	/* Force a poll of ADB interrupts */
+	adb_int_pending = 1;
+	via_pmu_interrupt(0, NULL);
+
+	/* Restart jiffies & scheduling */
+	wakeup_decrementer();
+
+	/* Re-enable local CPU interrupts */
+	local_irq_enable();
+	mdelay(10);
+	preempt_enable();
+
+	/* Call platform functions marked "on wake" */
+	pmac_pfunc_base_resume();
+	pmac_pfunc_i2c_resume();
+}
+
+static void powerbook_finish_sleep(void)
+{
+	if (pmu_kind == PMU_OHARE_BASED) {
+		pbook_free_pci_save();
+		iounmap(pb3400_mem_ctrl);
+	}
+}
+
+static int pmu_sleep_valid(suspend_state_t state)
+{
+	return state == PM_SUSPEND_MEM
+		&& (pmac_call_feature(PMAC_FTR_SLEEP_STATE, NULL, 0, -1) >= 0);
+}
+
+static struct platform_suspend_ops pmu_pm_ops = {
+	.prepare = powerbook_prepare_sleep,
+	.enter = powerbook_sleep,
+	.finish = powerbook_finish_sleep,
+	.valid = pmu_sleep_valid,
+};
+
+static int register_pmu_pm_ops(void)
+{
+	suspend_set_ops(&pmu_pm_ops);
+
+	return 0;
+}
+
+device_initcall(register_pmu_pm_ops);
+#endif
+
 static int
 pmu_ioctl(struct inode * inode, struct file *filp,
 		     u_int cmd, u_long arg)
@@ -2459,35 +2409,30 @@ pmu_ioctl(struct inode * inode, struct f
 	int error = -EINVAL;
 
 	switch (cmd) {
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_DEPRECATED_PMU_SLEEP_IOCTL)
 	case PMU_IOC_SLEEP:
 		if (!capable(CAP_SYS_ADMIN))
 			return -EACCES;
-		if (sleep_in_progress)
-			return -EBUSY;
-		sleep_in_progress = 1;
-		switch (pmu_kind) {
-		case PMU_OHARE_BASED:
-			error = powerbook_sleep_3400();
-			break;
-		case PMU_HEATHROW_BASED:
-		case PMU_PADDINGTON_BASED:
-			error = powerbook_sleep_grackle();
-			break;
-		case PMU_KEYLARGO_BASED:
-			error = powerbook_sleep_Core99();
-			break;
-		default:
-			error = -ENOSYS;
-		}
-		sleep_in_progress = 0;
+		printk(KERN_INFO
+		       "via-pmu: the PMU_IOC_SLEEP ioctl is deprecated.\n");
+		printk(KERN_INFO "via-pmu: use \"echo mem >"
+		       " /sys/power/state\"  instead!\n");
+		printk(KERN_INFO
+		       "via-pmu: this ioctl will be removed soon.\n");
+		error = pm_suspend(PM_SUSPEND_MEM);
 		break;
 	case PMU_IOC_CAN_SLEEP:
+		printk(KERN_INFO
+		       "via-pmu: the PMU_IOC_CAN_SLEEP ioctl is deprecated.\n");
+		printk(KERN_INFO
+		       "via-pmu: use \"grep mem /sys/power/state\" instead!\n");
+		printk(KERN_INFO
+		       "via-pmu: this ioctl will be removed soon.\n");
 		if (pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,0,-1) < 0)
 			return put_user(0, argp);
 		else
 			return put_user(1, argp);
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_DEPRECATED_PMU_SLEEP_IOCTL */
 
 #ifdef CONFIG_PMAC_BACKLIGHT_LEGACY
 	/* Compatibility ioctl's for backlight */
@@ -2495,9 +2440,6 @@ pmu_ioctl(struct inode * inode, struct f
 	{
 		int brightness;
 
-		if (sleep_in_progress)
-			return -EBUSY;
-
 		brightness = pmac_backlight_get_legacy_brightness();
 		if (brightness < 0)
 			return brightness;
@@ -2509,9 +2451,6 @@ pmu_ioctl(struct inode * inode, struct f
 	{
 		int brightness;
 
-		if (sleep_in_progress)
-			return -EBUSY;
-
 		error = get_user(brightness, argp);
 		if (error)
 			return error;
@@ -2566,87 +2505,7 @@ static int pmu_device_init(void)
 }
 device_initcall(pmu_device_init);
 
-
-#ifdef DEBUG_SLEEP
-static inline void 
-polled_handshake(volatile unsigned char __iomem *via)
-{
-	via[B] &= ~TREQ; eieio();
-	while ((via[B] & TACK) != 0)
-		;
-	via[B] |= TREQ; eieio();
-	while ((via[B] & TACK) == 0)
-		;
-}
-
-static inline void 
-polled_send_byte(volatile unsigned char __iomem *via, int x)
-{
-	via[ACR] |= SR_OUT | SR_EXT; eieio();
-	via[SR] = x; eieio();
-	polled_handshake(via);
-}
-
-static inline int
-polled_recv_byte(volatile unsigned char __iomem *via)
-{
-	int x;
-
-	via[ACR] = (via[ACR] & ~SR_OUT) | SR_EXT; eieio();
-	x = via[SR]; eieio();
-	polled_handshake(via);
-	x = via[SR]; eieio();
-	return x;
-}
-
-int
-pmu_polled_request(struct adb_request *req)
-{
-	unsigned long flags;
-	int i, l, c;
-	volatile unsigned char __iomem *v = via;
-
-	req->complete = 1;
-	c = req->data[0];
-	l = pmu_data_len[c][0];
-	if (l >= 0 && req->nbytes != l + 1)
-		return -EINVAL;
-
-	local_irq_save(flags);
-	while (pmu_state != idle)
-		pmu_poll();
-
-	while ((via[B] & TACK) == 0)
-		;
-	polled_send_byte(v, c);
-	if (l < 0) {
-		l = req->nbytes - 1;
-		polled_send_byte(v, l);
-	}
-	for (i = 1; i <= l; ++i)
-		polled_send_byte(v, req->data[i]);
-
-	l = pmu_data_len[c][1];
-	if (l < 0)
-		l = polled_recv_byte(v);
-	for (i = 0; i < l; ++i)
-		req->reply[i + req->reply_len] = polled_recv_byte(v);
-
-	if (req->done)
-		(*req->done)(req);
-
-	local_irq_restore(flags);
-	return 0;
-}
-#endif /* DEBUG_SLEEP */
-
-
-/* FIXME: This is a temporary set of callbacks to enable us
- * to do suspend-to-disk.
- */
-
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
-
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 int pmu_sys_suspended;
 
 static int pmu_sys_suspend(struct sys_device *sysdev, pm_message_t state)
@@ -2680,7 +2539,7 @@ static int pmu_sys_resume(struct sys_dev
 	return 0;
 }
 
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 
 static ssize_t show_kind(struct sys_device *sysdev, char *buf)
 {
@@ -2724,10 +2583,10 @@ static struct sys_device device_pmu = {
 };
 
 static struct sysdev_driver driver_pmu = {
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 	.suspend	= &pmu_sys_suspend,
 	.resume		= &pmu_sys_resume,
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 	.add		= &pmu_sys_add,
 };
 
@@ -2763,10 +2622,10 @@ EXPORT_SYMBOL(pmu_wait_complete);
 EXPORT_SYMBOL(pmu_suspend);
 EXPORT_SYMBOL(pmu_resume);
 EXPORT_SYMBOL(pmu_unlock);
-#if defined(CONFIG_PM_SLEEP) && defined(CONFIG_PPC32)
+#if defined(CONFIG_SUSPEND) && defined(CONFIG_PPC32)
 EXPORT_SYMBOL(pmu_enable_irled);
 EXPORT_SYMBOL(pmu_battery_count);
 EXPORT_SYMBOL(pmu_batteries);
 EXPORT_SYMBOL(pmu_power_flags);
-#endif /* CONFIG_PM_SLEEP && CONFIG_PPC32 */
+#endif /* CONFIG_SUSPEND && CONFIG_PPC32 */
 
--- everything.orig/Documentation/feature-removal-schedule.txt	2007-11-08 11:48:53.122870607 +0100
+++ everything/Documentation/feature-removal-schedule.txt	2007-11-08 11:49:21.602885743 +0100
@@ -350,3 +350,13 @@ Why:	The PMU information can be obtained
 Who:	Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
 
 ---------------------------
+
+What:	/dev/pmu suspend/can-suspend ioctls
+When:	January 2010
+Files:	drivers/macintosh/via-pmu.c
+Why:	powermac supports proper generic pm_ops now and can suspend with
+	"echo mem > /sys/power/state" instead of the ioctl, checking if
+	it can suspend can be done by reading /sys/power/state.
+Who:	Johannes Berg <johannes@xxxxxxxxxxxxxxxx>
+
+---------------------------
--- everything.orig/drivers/macintosh/Kconfig	2007-11-08 11:48:53.122870607 +0100
+++ everything/drivers/macintosh/Kconfig	2007-11-08 11:49:21.602885743 +0100
@@ -98,6 +98,18 @@ config DEPRECATED_PMU_INFO_IOCTLS
 
 	  If in doubt, say Y even if you will not use the ioctl.
 
+config DEPRECATED_PMU_SLEEP_IOCTL
+	bool "Support deprecated PMU sleep ioctl"
+	depends on ADB_PMU && SUSPEND && PPC32
+	default y
+	help
+	  The PMU code used to support suspending the machine via an ioctl
+	  before Linux had a generic suspend framework. Now the PMU supports
+	  suspending via the generic framework, this option adds the old
+	  PMU specific ioctl to the kernel.
+
+	  If in doubt, say Y even if you will not use the ioctl.
+
 config ADB_PMU_LED
 	bool "Support for the Power/iBook front LED"
 	depends on ADB_PMU


_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux