On Wed, 5 Sep 2007 10:07:54 -0700 Andrew Morton wrote: > > On 30 Aug 2007 22:42:46 +0200 "Tim Teulings" <rael@xxxxxxxxxxxx> wrote: > > Hello! > > > > > I don't have traces at hand and due to lack of time cannot reproduce it > > > up to tomorrow. However this hint may speed up your analysis! > > > > Sorry for the delay, but my desktop PC had an urgent hard disk problem I > > had to fix ASASP. > > > > So here is the output from dmesg that suggested to me that firewire > > might be a problem: > > Straightforward regression, two reporters, nothing happening. (material for ksummit discussion, e.g.) > > > usb_endpoint usbdev2.2_ep81: PM: suspend 0->2, parent 2-1:1.0 already 2 > > > usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 > > > usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 > > > hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 > > > usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 > > > eth2: Airport entering sleep mode > > > eth0: suspending, WakeOnLan disabled > > > pci_set_power_state(): 0002:20:0e.0: state=3, current state=5 > > > firewire_ohci: pci_set_power_state failed with -22<3>pci_device_suspend(): pci_suspend+0x0/0x9c [firewire_ohci]() returns -22 > > > suspend_device(): pci_device_suspend+0x0/0x98() returns -22 > > > Could not suspend device 0002:20:0e.0: error -22 > > > eth0: resuming > > > PHY ID: 4061e4, addr: 0 > > > eth2: Airport waking up > > > eth2: New link status: Connected (0001) > > > hda: Enabling Ultra DMA 2 > > > eth0: Link is up at 100 Mbps, full-duplex. > > > eth0: Pause is disabled > > > ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready > > > hdb: Enabling Ultra DMA 2 > > > usb_endpoint usbdev1.1_ep00: PM: resume from 0, parent usb1 still 2 > > > usb_endpoint usbdev1.1_ep81: PM: resume from 0, parent 1-0:1.0 still 2 > > > usb_device usbdev1.1: PM: resume from 0, parent usb1 still 2 > > > Driver sleep failed > > > Sleep rejected by devices > > > adb: starting probe task... > > > adb devices: [2]: 2 c4 [3]: 3 1 [7]: 7 1f > > > ADB keyboard at 2, handler 1 > > > ADB mouse at 3, handler set to 4 (trackpad) > > > adb: finished probe task... > > > usb_device usbdev1.1: PM: suspend 0->2, parent usb1 already 2 > > > usb_endpoint usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2 > > > hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2 > > > usb_endpoint usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2 > > > eth2: Airport entering sleep mode > > > eth0: suspending, WakeOnLan disabled > > > Trying to free already-free IRQ 40 > > > pci_set_power_state(): 0002:20:0e.0: state=3, current state=5 > > > firewire_ohci: pci_set_power_state failed with -22<3>pci_device_suspend(): pci_suspend+0x0/0x9c [firewire_ohci]() returns -22 > > I grepped the whole tree for firewire_ohci and came up blank. What is it? See drivers/firewire/Makefile --- ~Randy *** Remember to use Documentation/SubmitChecklist when testing your code *** _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
