Re: [PATCH] sata_promise: use TF interface for polling NODATA commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Tejun Heo wrote:
> sata_promise uses two different command modes - packet and TF.  Packet
> mode is intelligent low-overhead mode while TF is the same old
> taskfile interface.  As with other advanced interface (ahci/sil24),
> ATA_TFLAG_POLLING has no effect in packet mode.  However, PIO commands
> are issued using TF interface in polling mode, so pdc_interrupt()
> considers interrupts spurious if ATA_TFLAG_POLLING is set.
> 
> This is broken for polling NODATA commands because command is issued
> using packet mode but the interrupt handler ignores it due to
> ATA_TFLAG_POLLING.  Fix pdc_qc_issue_prot() such that ATA/ATAPI NODATA
> commands are issued using TF interface if ATA_TFLAG_POLLING is set.
> 
> This patch fixes detection failure introduced by polling SETXFERMODE.
> 
> Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>

Eeeek... Wrong thread.  Please ignore this posting.  Will repost.  Sorry.

-- 
tejun
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux