Re: [RFC][PATCH] Add suspend and resume support to uli526x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, Jun 03, 2007 at 12:37:35PM +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rjw@xxxxxxx>
> 
> Add suspend/resume support to the uli526x network driver (tested on x86_64,
> with 'Ethernet controller: ALi Corporation M5263 Ethernet Controller, rev 40').
> 
> Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>

Nice work!  Looks good to me.

Signed-off-by: Val Henson <val@xxxxxxx>

-VAL

>  drivers/net/tulip/uli526x.c |  120 ++++++++++++++++++++++++++++++++++++++------
>  1 file changed, 105 insertions(+), 15 deletions(-)
> 
> Index: linux-2.6.22-rc3/drivers/net/tulip/uli526x.c
> ===================================================================
> --- linux-2.6.22-rc3.orig/drivers/net/tulip/uli526x.c	2007-06-03 12:10:41.000000000 +0200
> +++ linux-2.6.22-rc3/drivers/net/tulip/uli526x.c	2007-06-03 12:14:33.000000000 +0200
> @@ -220,6 +220,10 @@ static int mode = 8;
>  static int uli526x_open(struct net_device *);
>  static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
>  static int uli526x_stop(struct net_device *);
> +#ifdef CONFIG_PM
> +static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state);
> +static int uli526x_resume(struct pci_dev *pdev);
> +#endif
>  static struct net_device_stats * uli526x_get_stats(struct net_device *);
>  static void uli526x_set_filter_mode(struct net_device *);
>  static const struct ethtool_ops netdev_ethtool_ops;
> @@ -425,21 +429,14 @@ static void __devexit uli526x_remove_one
>  
>  
>  /*
> - *	Open the interface.
> - *	The interface is opened whenever "ifconfig" activates it.
> + *	Bring the interface up.
> + *	Used by uli526x_open and uli526x_resume.
>   */
>  
> -static int uli526x_open(struct net_device *dev)
> +static void uli526x_up(struct net_device *dev)
>  {
> -	int ret;
>  	struct uli526x_board_info *db = netdev_priv(dev);
>  
> -	ULI526X_DBUG(0, "uli526x_open", 0);
> -
> -	ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
> -	if (ret)
> -		return ret;
> -
>  	/* system variable init */
>  	db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
>  	db->tx_packet_cnt = 0;
> @@ -467,7 +464,25 @@ static int uli526x_open(struct net_devic
>  	db->timer.data = (unsigned long)dev;
>  	db->timer.function = &uli526x_timer;
>  	add_timer(&db->timer);
> +}
> +
> +
> +/*
> + *	Open the interface.
> + *	The interface is opened whenever "ifconfig" activates it.
> + */
>  
> +static int uli526x_open(struct net_device *dev)
> +{
> +	int ret;
> +
> +	ULI526X_DBUG(0, "uli526x_open", 0);
> +
> +	ret = request_irq(dev->irq, &uli526x_interrupt, IRQF_SHARED, dev->name, dev);
> +	if (ret)
> +		return ret;
> +
> +	uli526x_up(dev);
>  	return 0;
>  }
>  
> @@ -613,17 +628,15 @@ static int uli526x_start_xmit(struct sk_
>  
>  
>  /*
> - *	Stop the interface.
> - *	The interface is stopped when it is brought.
> + *	Take the interface down.
> + *	Used by uli526x_stop and uli526x_suspend.
>   */
>  
> -static int uli526x_stop(struct net_device *dev)
> +static void uli526x_down(struct net_device *dev)
>  {
>  	struct uli526x_board_info *db = netdev_priv(dev);
>  	unsigned long ioaddr = dev->base_addr;
>  
> -	ULI526X_DBUG(0, "uli526x_stop", 0);
> -
>  	/* disable system */
>  	netif_stop_queue(dev);
>  
> @@ -634,6 +647,21 @@ static int uli526x_stop(struct net_devic
>  	outl(ULI526X_RESET, ioaddr + DCR0);
>  	udelay(5);
>  	phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
> +}
> +
> +
> +/*
> + *	Stop the interface.
> + *	The interface is stopped when it is brought.
> + */
> +
> +static int uli526x_stop(struct net_device *dev)
> +{
> +	struct uli526x_board_info *db = netdev_priv(dev);
> +
> +	ULI526X_DBUG(0, "uli526x_stop", 0);
> +
> +	uli526x_down(dev);
>  
>  	/* free interrupt */
>  	free_irq(dev->irq, dev);
> @@ -654,6 +682,64 @@ static int uli526x_stop(struct net_devic
>  }
>  
>  
> +#ifdef CONFIG_PM
> +
> +/*
> + *	Suspend the interface.
> + */
> +
> +static int uli526x_suspend(struct pci_dev *pdev, pm_message_t state)
> +{
> +	struct net_device *dev = pci_get_drvdata(pdev);
> +
> +	ULI526X_DBUG(0, "uli526x_suspend", 0);
> +
> +	if (dev && netdev_priv(dev)) {
> +		if (netif_running(dev)) {
> +			netif_device_detach(dev);
> +			uli526x_down(dev);
> +		}
> +		pci_save_state(pdev);
> +		pci_enable_wake(pdev, pci_choose_state(pdev, state), 0);
> +		pci_disable_device(pdev);
> +		pci_set_power_state(pdev, pci_choose_state(pdev, state));
> +	}
> +	return 0;
> +}
> +
> +/*
> + *	Resume the interface.
> + */
> +
> +static int uli526x_resume(struct pci_dev *pdev)
> +{
> +	struct net_device *dev = pci_get_drvdata(pdev);
> +	struct uli526x_board_info *db = netdev_priv(dev);
> +	int err;
> +
> +	ULI526X_DBUG(0, "uli526x_resume", 0);
> +
> +	if (dev && db) {
> +		pci_set_power_state(pdev, PCI_D0);
> +		err = pci_enable_device(pdev);
> +		if (err) {
> +			printk(KERN_WARNING "%s: Could not enable device \n",
> +				dev->name);
> +			return err;
> +		}
> +		pci_restore_state(pdev);
> +		pci_set_master(pdev);
> +		if (netif_running(dev)) {
> +			uli526x_up(dev);
> +			netif_device_attach(dev);
> +		}
> +	}
> +	return 0;
> +}
> +
> +#endif /* CONFIG_PM */
> +
> +
>  /*
>   *	M5261/M5263 insterrupt handler
>   *	receive the packet to upper layer, free the transmitted packet
> @@ -1689,6 +1775,10 @@ static struct pci_driver uli526x_driver 
>  	.id_table	= uli526x_pci_tbl,
>  	.probe		= uli526x_init_one,
>  	.remove		= __devexit_p(uli526x_remove_one),
> +#ifdef CONFIG_PM
> +	.suspend	= uli526x_suspend,
> +	.resume		= uli526x_resume,
> +#endif
>  };
>  
>  MODULE_AUTHOR("Peer Chen, peer.chen@xxxxxxxxxx");
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx
https://lists.linux-foundation.org/mailman/listinfo/linux-pm

[Index of Archives]     [Linux ACPI]     [Netdev]     [Ethernet Bridging]     [Linux Wireless]     [CPU Freq]     [Kernel Newbies]     [Fedora Kernel]     [Security]     [Linux for Hams]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux RAID]     [Linux Admin]     [Samba]

  Powered by Linux