This patch adds a clk_must_disable() operation, exposing the clock constraints which often distinguish system power states. Systems with such constraints include ones using ARM-based AT91, OMAP, and PXA chips. The new operation lets driver methods check those constraints. (Note that because of its APM/ACPI legacy, Linux can't currently handle more then two of those state through the /sys/power/state infrastructure; they are called "standby" and suspend-to-"mem", regardless of what the underlying hardware calls them.) A common benefit to leaving some device clocks enabled is that a suspended device may then be able to issue system wakeup events. RS232, USB, Ethernet, and other drivers can use driver model wakeup flags as userspace directions about how to trade off between the lowest power "full off" driver states and the more functional wakeup-enabled ones. Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx> --- Seems appropriate for 2.6.22 merge ... last time this came up, there were no real objections, but the sample implementation (AT91) was a bit messy. include/linux/clk.h | 20 ++++++++++++++++++++ 1 files changed, 20 insertions(+) Index: at91/include/linux/clk.h =================================================================== --- at91.orig/include/linux/clk.h 2007-02-16 08:47:11.000000000 -0800 +++ at91/include/linux/clk.h 2007-02-16 08:47:17.000000000 -0800 @@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru */ struct clk *clk_get_parent(struct clk *clk); +/** + * clk_must_disable - report whether a clock's users must disable it + * @clk: one node in the clock tree + * + * This routine returns true only if the upcoming system state requires + * disabling the specified clock. + * + * It's common for platform power states to constrain certain clocks (and + * their descendants) to be unavailable, while other states allow that + * clock to be active. A platform's power states often include an "all on" + * mode; system wide sleep states like "standby" or "suspend-to-RAM"; and + * operating states which sacrifice functionality for lower power usage. + * + * The constraint value is commonly tested in device driver suspend(), to + * leave clocks active if they are needed for features like wakeup events. + * On platforms that support reduced functionality operating states, the + * constraint may also need to be tested during resume() and probe() calls. + */ +int clk_must_disable(struct clk *clk); + #endif _______________________________________________ linux-pm mailing list linux-pm@xxxxxxxxxxxxxxxxxxxxxxxxxx https://lists.linux-foundation.org/mailman/listinfo/linux-pm
