"Michael S. Tsirkin" <mst@xxxxxxxxxxxxxx> writes:
>> The only case I can see which might trigger this is if we saved
>> pci-X state and then didn't restore it because we could not find
>> the capability on restore.
>
> Hmm. pci_save_pcix_state/pci_restore_pcix_state seem to only handle
> regular devices and seem to ignore the fact that for bridge PCI-X
> capability has a different structure.
>
> Is this intentional?
Probably not a such. I don't think we have any drivers for bridge
devices so I don't think it matters. It likely wouldn't hurt to fix
it just in case though.
Do any of the mellanox cards do anything with the bridge on the card?
> If not, here's a patch to fix this. Warning: completely untested.
If you fix the offsets and diff this against my last fix (to never
free the buffer) I think your patch makes sense.
> PCI: restore bridge PCI-X capability registers after PM event
>
> Restore PCI-X bridge up/downstream capability registers
> after PM event. This includes maxumum split transaction
> commitment limit which might be vital for PCI X.
>
> Signed-off-by: Michael S. Tsirkin <mst@xxxxxxxxxxxxxx>
>
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index df49530..4b788ef 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -597,14 +597,19 @@ static int pci_save_pcix_state(struct pci_dev *dev)
> if (pos <= 0)
> return 0;
>
> - save_state = kzalloc(sizeof(*save_state) + sizeof(u16), GFP_KERNEL);
> + save_state = kzalloc(sizeof(*save_state) + sizeof(u16) * 2, GFP_KERNEL);
> if (!save_state) {
> - dev_err(&dev->dev, "Out of memory in pci_save_pcie_state\n");
> + dev_err(&dev->dev, "Out of memory in pci_save_pcix_state\n");
> return -ENOMEM;
> }
> cap = (u16 *)&save_state->data[0];
>
> - pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
> + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
This appears to be the proper test.
> + pci_read_config_word(dev, pos + PCI_X_BRIDGE_UP_SPL_CTL, &cap[i++]);
> + pci_read_config_word(dev, pos + PCI_X_BRIDGE_DN_SPL_CTL, &cap[i++]);
> + } else
> + pci_read_config_word(dev, pos + PCI_X_CMD, &cap[i++]);
> +
> pci_add_saved_cap(dev, save_state);
> return 0;
> }
> @@ -621,7 +626,11 @@ static void pci_restore_pcix_state(struct pci_dev *dev)
> return;
> cap = (u16 *)&save_state->data[0];
>
> - pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
> + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
> + pci_write_config_word(dev, pos + PCI_X_BRIDGE_UP_SPL_CTL, cap[i++]);
> + pci_write_config_word(dev, pos + PCI_X_BRIDGE_DN_SPL_CTL, cap[i++]);
These look like the proper two registers to save.
> + } else
> + pci_write_config_word(dev, pos + PCI_X_CMD, cap[i++]);
> pci_remove_saved_cap(save_state);
> kfree(save_state);
> }
> diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h
> index f09cce2..fb7eefd 100644
> --- a/include/linux/pci_regs.h
> +++ b/include/linux/pci_regs.h
> @@ -332,6 +332,8 @@
> #define PCI_X_STATUS_SPL_ERR 0x20000000 /* Rcvd Split Completion Error Msg */
> #define PCI_X_STATUS_266MHZ 0x40000000 /* 266 MHz capable */
> #define PCI_X_STATUS_533MHZ 0x80000000 /* 533 MHz capable */
> +#define PCI_X_BRIDGE_UP_SPL_CTL 10 /* PCI-X upstream split transaction limit */
> +#define PCI_X_BRIDGE_DN_SPL_CTL 14 /* PCI-X downstream split transaction limit */
Unless I am completely misreading the spec. While you have picked the
right register to save the offsets should be 0x08 and 0x0c or 8 and 12....
Eric
_______________________________________________
linux-pm mailing list
linux-pm@xxxxxxxxxxxxxx
https://lists.osdl.org/mailman/listinfo/linux-pm
